pressure used for sale

Stirred boiler / silo tank van der Molen 05-031/01, built 2006, in good used condition. Completely made of stainless steel, 2850 litres capacity, double-walled, heatable (steam), filling from above or with external pump from below possible. Dimensions B/T/H 190/160/420. Operating voltage 400 volts. More on request.

With 48 filling valves 12head crown corker 12head screw capper

PTC JTR-C Cold Water Trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... Bhdwvn8yff - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: JTR-C 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW JTR-C 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW JTR-C 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW JTR-C 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW JTR-C 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 - Empty weight: approx. 600 kg - High pressure pump: HPP - HD reel: fixed and manual or hydraulic with max. 1/ ...

Steel pressure tank, enamelled (last content: fruit juice), operating pressure: 3 bar approx. 16.000 liters used - in very good condition UNI-KINN B-Nr. 19-801 GL Tank with vaulted bottom Operating pressure: 3 bar Measurment and Weight: Diameter: approx. 2.400 mm Total length: approx. 3.700 mm Weight: approx. 3 t on the top: 1 x air vent NW 50 on the front dished bottom: 1 x manhole 400 x 300 mm swiveling 1 x flange connection NW 50 1 x flange connection NW 40 as outlet Otherweise see photos

PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...

The blower is installed in a soundproofing hood with basic frame, safety valve, recop flap and attachments. The drive engine can be designed according to customer specifications. The compressor stage is completely outdated. You can also only purchase the GM 10 S level. If you have any questions, please call.

Mosca STF stowage clock conveyor; good condition; 1000mm length; 2 sensors; Speed adjustable. Mosca conveyor STF; good condition; lenght 1000mm; two sensors; I'm not.

PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only with version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW JTR-H 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW JTR-H 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions: 3,370 x 1,640 x 1,540 Cxombmv - Empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manually with max. 1/2" or 100 m. 3/8" hose (included) - Water supply ree ...

The blower is sold in a completely overhauled way. The photos show the blower before the overhaul.

Sparkling Pressure Tank / Sparkling Cooling Tank / Steel Pressure Tank Agitator Tank / Storage Tank / Pressure Tank with red food safe munkadur coating with cooling jacket and with isolation STANDING with new KIESELMANN sparkling pressure fitting Operating Pressure: 8 bar Volume: 5.750 Litre Measurement and Weight: Total Height: 4400 mm Tank Body Height: 3325 mm Diameter: 1600 mm Weight: 2110 kg Uni 3750 Operating-overpressure: 8 bar, Test pressure: 10,5 bar Operating pressure cooling jacket: 2 bar, Test pressure: 2,6 bar Inspection book, Dokumentation available Tank-Description Container with torispherical bottoms. Jacket and walls 9 mm. On cylindrical part of a cooling jacket as double jacket about 2.500 mm high. Container outside approx. 100 mm isolated, with screw stainless steel metal cover. Tank upp ...

Saw motors with flanges 2 pieces brand new 2 pieces used, re-edited in 2012 1.5 kW Flat rate for 4 engines EUR 360.00 The engines are in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...

High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Foerder quantity: 12 l/min. - Motor: Electric 4-pole 230V 2.2kW, 1400 1-min - Dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START equipment - Handle with brackets for the power cord and the high-pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm) for easy movement on steps and over uneven terrain - Manometer - Built-in professional relief valve - Delayed TotalStop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainles ...

High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Foerder quantity: 32 l/min. - Engine: Honda GX390 petrol 8.7kW - Dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Manometer - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HD hose 3/8" + 10 m HD hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles Oylbt - Pistol with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning device that is ideal for cleaning and removing pipe blockages for pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages of house ...

Zum Verkauf steht ein Fräskopf bei der Firma Pfauter ca.2012 komplett überholt.

Conductive transmitter; Conductivity meter for bottle cleaning machines. Used from warehouse dissolution. Very good condition see photos

consisting of: Filler Cimec America with 24 filling valves, with double pre-evacuation Crowner Arol Esse with 4 closing heads

High pressure cleaner PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel 53hp/39.5kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 - Kerb weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as a trolly with industrial wheels - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues The following models are available: Easy Power XL D 47/400 | 47 l/min. 400 bar Easy Power XL D 38/500 | 38 l/min. 500 bar Easy Power XL D 30/600 | 30 l/min. 600 bar Ea ...

High pressure cleaner PTC Easypower XL E similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-38 l/min. - Motor: IE3 Electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 w-min or IE3 Electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Empty weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operat ...

Agitator 0.25 KW with aluminium propeller 300 mm With traverse made of aluminium profiles 45 45 mm. Used electric motor 0.25 KW, 3 x 230/400 Volt, n = 1375 rpm, Weight approx. 15 kg. With motor protection plug. Shaft: precision stainless steel shaft D14, length 500 mm, diameter 14 mm, Material stainless steel 1.4301. Rigid coupling made of stainless steel 1.4571. Stirring organ: Two-wing aluminum propeller d = 300 mm.

High pressure cleaner PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Foerder quantity: 13-42 l/min. - Engine: Kohler Stage V Diesel 35hp/26kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/m ...

High pressure cleaner PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Foerder quantity: 38 or 30 l/min. - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or electric 63A, 3Ph-440V-60Hz 40hp/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water suction by self-priming pump - Stainless steel relief v ...

consisting of: 12-head rinser 12-head long-tube beer filler 4-head crown corker capacity: 2200 bph

Aerzener

High pressure cleaner PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Foerder quantity: 21 or 15 l/min. - Engine: Vanguard 31 HP Stage V petrol 31hp/23kW, 3400 rpm - Dimensions: 1,000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - Stepless pressure valve made of stainless steel with EASY-START - Large water filter with maintenance-friendly filter cartridge - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet  ...

Supply system for sliding ring seals / pressure tank 12L Manufacturer: Fluiten Material: Stainless steel (1.4301) Built: 2000 Volume: 12 L Pressure (max): 16 bar Temperature (max): 99 °C Height: 430 mm (without gauge) Diameter: 219 mm incl. thermometer, gauge and sight glass Condition: new and unused Connections: see drawing Item can be inspected at any time in 76694 Forest by arrangement.

ochdruckcleaner PTC Easypower E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet , Kärcher, Dibo, ... - Operating pressure: 300-700 bar - Foerder quantity: 15-30 l/min. - Motor: Electric 32A/63A, 3Ph-400V-50Hz 20-30HP/15-22.5kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Kerb weight: approx. 180/210 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-triangle starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels 320 mm - Direct water suction by self-priming pump - Stainless steel relief v ...

As a standard solution for feeding screening machines or other processing machines, we offer our RF pipe conveyor system. As with all machines and systems of KELLNER Siebtechnik GmbH, we also use our modular system to offer individual solutions. Our RF system has been designed in such a way that the screen material can be unloaded directly as bagged goods or pre-screened via a sieve insert before it is transported to the machine. In this way, you can buy exactly the technology that you actually need in your daily practice. Our MACHINES of the RF series are also characterized by design advantages as well as simple retrofit solutions.

Measuring instrument for flow rate measurement via differential pressure Manufacturer Endress + Hauser EH Type Deltabar S MWP 160bar Delta P -100 ... 100 mbar 4 ... 20 mA HART Bconx8hxqp Multiple existing

Running bezel of a hamlet E110 The bezel is almost unsubstonible

Dimensions mm: 3200 X 2200 Milling depth mm: 35 Total connection KW: 1.2

The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Y.O.M.: 2002 Factory No.: 02050057 Power: 500 l/h, motor: 22 kW Pressure: 1000 bar as good as new with manual Dimensions LWH: 1400 x 1000 x 1250 mm Weight: 900 kg

Properties: Pressure-free Used roller conveyor Condition: good (used) Feet to order separately Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 24V technology Incl. sensors and light barriers (pre-assembled) Technical data: Dimensions of the roller conveyor Manufacturer: Interroll Type: Pressureless storage pressure Drive: 24V technology Total width approx.: 740mm Conveyor width: 655 mm Roll division: 75mm The system consists of 6 segments: 3x 2,250 mm each 3 drive rollers 2x 540mm 1 drive roller each 1x 2775mm 5 drive rollers each information on the frame Height: 150mm Width: 40mm Max weight of the conveyed material 50Kg Roller railway The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal pr ...

Properties: Used roller conveyor Condition: good (used) Feet to order separately Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged 24V technology Incl. sensors and light barriers (pre-assembled) Technical data: Dimensions of the roller conveyor Manufacturer: Interroll Type: Pressureless storage pressure Drive: 24V technology Total width approx.: 540mm Conveyor width: 455 mm Roll division: 75mm The system consists of 7 segments: 7x 1,650 with 2 drive rollers each information on the frame Height: 150mm Width: 40mm Max weight of the conveyed material 50Kg Roller railway The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal process. During transport, the roller conveyor can convey sensitive and dif ...

Pressure air compressor, make CompAir / Geveke, type: VMHD 500, for 735 rpm, 21.5 bar, built 1985.

Pressure air compressor, make CompAir / Geveke, type: VMD 750, for 735 rpm, 8.5 bar, built 1991.

EUROLUX ZKG Tanks/ Storage Tanks / Pressure Tanks/ Beer Tanks with cone floor with cooling jacket made of V2A Max operating pressure: 0.99 bar, test pressure: 1.5 bar Content: from 200 litres to 1,000 litres Kat No. 20-00071-1L 200 litres 20-00071-2L 300 litres 20-00071-3L 400 litres 20-00071-4L 500 litres 20-00071-5L 625 litres 20-00071-6L 750 litres 20-00071-7L 1,000 litres Material: V2A - AISI 304, 1.4301 Surface: outside marbled, inside 2B=IIIC Tank upper body: with manhole lid round Ø 400 mm with 2 x handle with 6 x screws with overpressure valve (on extra charge) with downward drawn filling pipe DN 32 with fermentation connector (with overpressure valve, with manometer) with 2 x thread connection DN 50 with CIP spray head/CIP cleaning (on extra charge) with cap nut DN 50 ball Ø 25 mm with connection for cleaning supply ...

The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.

Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks

The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min.  ...

Storage Tank/ Pressure Tank/Beer tank 2400 liters in AISI 304 with cooling jacket Test pressure: 1,5 bar, Operating pressure: 0,99 bar - NEW Material: V2A – AISI 304 (1.4301) Operating pressere: 0,99 bar Surface inside IIIC Operating temperature in °C: 130 Upper body: Manhole lid round DN 400 with 6 screws With 1 Thread connection DN 50 and with handle bar With CO2-connection (extra charge) With overpressure valve (extra charge) Tank cylinder: With cooling jacket With connections for cooling jacket on the back inlet 1” AG, outlet 1¼”AG With connection for sample valve DN 15 ( sample valve - extra charge) With connection for temperature indicator 3/8 (temperature indicator - extra charge) Lower bottom: Rest outlet with butterfly valve DN 50 with conical bottom On 4 stable feet Easily movable with a m ...

with 130 filling valves and 26head crown corker Year of manufacturing: 1994 capacity: approx. 50.000 bph Control system to Siemens S7 - 02/2011 Reconstruction capper to crown cork and Twist off, both is possible without conversion of the capping elements

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

The CE40 belongs to the series of our high-pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal moldings and circumferential stainless steel side frames. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eyelet facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 30 kW (50Hz) / 33 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A ...

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 1000 bar, Number of foerders: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Engine hours: approx: 2 h, Trolly, incl. pistol, 10 m HD hose, 15° flat jet dues,

The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.

Operating pressure: 350 bar, Flow rate: 21 l/min, Engine: Vanguard 2-cylinder, 4-stroke gasoline engine Working hours: 2h