pressure used for sale

A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.

Proportional pressure control valve, R901344934, ZDREE6VP4-….; Rexroth, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - Comes from a spare parts warehouse of a certified production facility, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Features: Volume 2880 L Operating pressure 2 bar Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Overall height 2650 mm Height 1400 mm Diameter 1400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Operating temperature 20 °C Topsoil: Clapper bottom 2 crane eyes T-piece with CIP line and pressure relief valve CIP Ball Tank cylinder: Level measurement at the top Manhole 350x450 mm Ladder hoes Flange Underbody: Clapper bottom 2 x drain in subfloor 4 trumpet feet, height-adjustable, with washers

The T 4.40 DSK is an oil-free combined pressure/vacuum pump for blowing and suction air. It is a robust and durable pump that is designed for continuous operation. This dry-running positive displacement pump works with self-lubricating gate valves made of a graphite composite and requires minimal maintenance. Volume flow 50 Hz 35 m³/h Pressure/vacuum relative 50 Hz ±0.6 bar Power 50 Hz 1.85 kW Sound level 50 Hz 68 dB(A) Volume flow 60 Hz 43 m³/h Pressure/vacuum relative 60 Hz ±0.6 bar Power 60 Hz 2.2 kW Sound level 60 Hz 68 dB(A) Weight 46... 49.5 kg with motor

De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.

High-Pressure Waterjet Trailer, wp 2,800 bar / 28 lpm YoM 2023 For sale is a very well maintained high-pressure waterjet trailer unit with extremely low operating hours. The machine is in excellent technical and visual condition and ready for immediate use. Powered by a Volvo diesel engine (160 kW), the unit delivers 2,800 bar at 28 lpm, making it ideal for demanding industrial and waterjet cleaning applications. With only approx. 185 operating hours, the unit is close to new. The trailer comes including accessories and is fully operational – no additional investment required. Inspection and test run possible.

KHS Innofill DRS 168/24 with 168 filling valves an 24 head crown corker capacity: up to 72.000 bph year of manufacturing: 2014 pitch: 94 mm with HDE high pressure injection with shower for broken glass fixed for 0,33 and 0,5 ltr. bottles already dismantled and available in Germany

High pressure compressor LMF 40 bar Type: Eco Pet VD 1350 - B Year of manufacturing: 2003 Capacity: 1.350 m³/h Maximan pressure: 42 bar Electric power: 243 kW Working hours: approx. 35.800 h with Siemens S7 PLC and Danfoss frequency drive incl. pressure air buffer tank, 900 ltr. incl. air dryer incl. chiller / cooling tower the machine is dismantled and on stock in Germany

Features Volume 20800 L Material V2A (AISI 304) 1.4301 Horizontal design Length 3550 mm Cylinder length 2180 mm Front diameter 2990 mm Rear diameter 2900 mm Surface inside 2B=IIIC ground Surface marbled on the outside Operating pressure 3 bar Operating temperature range 20° C Description Tank crest: Clapper bottom curved bottom Pressure relief valve Light connection 2x flange connection with cover at the back and front DN 200 Front: Manhole oval 410x310 mm Manhole round DN400 with disc valve DN 100 Tasting tap Dip shaft sleeve with temperature display analog Clarification drain with ball valve DN 50 Flange connection for sight glass DN 200

High-pressure pump in the container with ES 2 control – immediately ready for use For sale is a powerful high-pressure pump in a container, equipped with ES 2 control. The system is technically tested and 100% ready for use. Technical data: Machine number: A8.01174.xxxx WP 2250 / 2500 bar Flow 38 /34 lpm Registration date: 10/2008 Total operating hours: 11,960 h Drive: Caterpillar C7 engine Power: 186 kW Engine completely renewed at 10,350 operating hours High Pressure Pump: Sleeves and pistons operating hours: 2,870 h Condition & Notes: Used, technically flawless Regularly serviced Ready to use Ideal for industrial high-pressure and cleaning applications Financing: Financing possible (by arrangement)

Pharmatec 500-S4 Multistage pressure column distillation unit Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph

WOMA 325 Z P30 high-pressure system – 1000 bar – replacement engine Scania – ready for use For sale is a WOMA 325 Z P30 high-pressure plunger pump, installed in a MAN vehicle. The system is 100% operational, technically and visually very well maintained. The machine is equipped with a Scania DS11 replacement engine (see nameplate). Robust, proven technology – ideal for demanding industrial cleaning jobs. Technical data: Pump manufacturer: WOMA Type: 325 Z P30 Max. operating pressure: 1,010 bar Flow rate: 134 l/min Speed: 1,800 rpm Plunger Ø: 30 mm Power consumption: approx. 230 kW Drive: Scania Replacement Engine (DS11) Installation: MAN vehicle Operating hours: approx. 13,649 h Condition: Fully functional very neat overall condition Ready to use No known defects The facility is ideal for: industrial high-pressure cle ...

Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01.

functionality: Heiz-/Kühlbar, Isolation, Overpressure,Manufacturer: GROSS Behälter- und Anlagenbau,condition: gebraucht,volume: 37.800,max. excess pressure: 2,0,max. allowable working temperature: 20,lower bottom: Konusboden,construction: hanging,stand type: Ring,Heizung/Kühl (Filterleiste): vorhanden,Volume double jacket: 260,0,max. allowable working overpressure (dj) : 1.0,insulation: vorhanden,total height: 7.500,total width: 2.900,manhole: im Oberboden, nameplate: Yes,remarks: Cooling area: 17 m² Cargo dimensions: 7.5 x 3.0 x 3.0 m ,latest application: Beer,floor bearing: No,stream interrupter:

functionality: Overpressure,Manufacturer: GROSS Behälter- und Anlagenbau,condition: used,volume: 69.000,max. excess pressure: 2,0,construction: stehend,stand type: Füße höhenadjustable,diameter inside: 3.494,diameter outside: 3.500,cylindrical height: 6.200,total height: 9.000,Wall thickness lower bottom: 5,wall thickness cylinder: 3,wall thickness of upper bottom: 4,Technical documentation: Drawing, TÜV-Papiere, div. Unterlagen,manhole: im Zylinder (ca. 350 x 450 mm), nameplate: Yes,technical equipment: Crane eyelets,outlet: DN80 DIN 11851 ,remarks: Exact dimensions may vary slightly,

functionality: heating/cooling, agitator, overpressure, vacuum,condition: unused,volume: 3.535,vacuum: 1,0,max. excess pressure: 6,0,max. allowable working temperature: 150,bottom: Klöpperboden,construction: standing,stand type: feet height adjustable,quantity legs: 4,heating/cooling (filter bar): available,diameter inside: 1.400,cylindrical height: 1.650,total height: 3.553,year of construction: 2008,Technical documentation: drawing, various documents,manhole: in the topsoil (DN 600), nameplate: Yes,technical equipment: Level indicator (without guarantee), spray head, crane eyelets,outlet: DN32 DIN 11851

Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.

Equipment: Overpressure,Manufacturer: ADF Apparatebau Freudenberg,Condition: used,Volume: 37,100,Max. overpressure: 5.0,Max. permissible Operating temperature : 90,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter outside: 3,200,Cylindrical height: 3,500,Total height: 6,200,Manhole / dome: in the cylinder, in the topcase,Type plate: Yes,Equipment: Crane eyelets,Outlet: available,Remarks: Filter plate welded in inside (see pictures),Material in contact with the product: V4A 1.4571 (AISI316),Floor bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Equipment: Overpressure, Vacuum,Manufacturer: Gebr. Schmeck Siegen,Condition: used,Volume: 50,000,Vacuum: 1.0,Max. overpressure: 3.2,Max. permissible Operating temperature : 200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,600,Cylindrical height: 4,050,Total height: 6,000,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: Flange DN100,Remarks: Steel feet cut off below the mounting flange (see pictures) Inside with reinforcement rings (see pictures),Last use: Chemical,Material in contact with the product: V4A

Equipment: Overpressure, Vacuum,Manufacturer: Industrietechnik Ambs,Condition: used,Volume: 50,950,Vacuum: 1.0,Max. overpressure: 3.0,Max. permissible Operating temperature : 200,Shelves: clapper bottom,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,600,Cylindrical height: 4,100,Total height: 6,000,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Outlet: flange,Outlet : 100,Remarks: Steel feet cut off below the mounting flange (see pictures),Last use: Chemical,Material in contact with the product: V4A 1.4571 (AISI316),Material feet: Steel,Bottom bearing:

Equipment: Heatable/coolable, Overpressure, Vacuum,Condition: used,Volume: 33.725,Vacuum: 1.0,Max. overpressure: 6.0,Max. permissible Operating temperature : 140,Specific gravity of the medium: 1.9,Design: upright,Stand shape: feet,Number of feet: 4,Heating/cooling (filter bar): available,Volume double jacket: 420,0,Max. permissible Operating overpressure: 4.0,Max. permissible Operating temperature : 140,Temperature control cylinder: half tube coil,Temperature control underbody: half tube coil,Diameter inside: 2,400,Total height: 8,850,Technical documents: drawing, various documents,Manhole / dome: in the cylinder, in the top floor (DN

Injection material blowing pressure: 0.5-6bar, Drive: variable gearbox Lenze, Elements: material hose, blow-out nozzle, directional valve, swivel lever, exhaust valve, valve, nozzle, pressure reducer, handwheel, slide gate, control cabinet, control switch, water hose, needle valve, nozzle mixing body. Overhauled by the manufacturer in 2014. With pressure vessel and documentation. An on-site inspection is possible.

An HD piston compressor Bauer is available. Capacity: 800l/min, max. operating overpressure: 160bar, max. operating pressure: 2320psig, power: 18.5kW, speed: 1180rpm. Machine dimensions X/Y/Z: approx. 2200mm/1100mm/1450mm, weight: approx. 750kg. An on-site inspection is possible.

Equipment: heatable/coolable, insulation, overpressure,condition: brand new,volume: 3,850,max. overpressure: 3.3,lower bottom: eccentric cone,design: upright,stand shape: feet height adjustable,number of feet: 4,heating/cooling (filter bar): available,temperature control cylinder: half-tube coil,temperature control underbody: double jacket,insulation: available,insulating jacket: hermetically welded,insulation material: PU foam,material insulation jacket: stainless steel,insulation thickness: 70,diameter inside: 1.600,diameter outside: 1.800,cylindrical height: 1.250,total height: 3.900,technical documentation: drawing,

High-pressure injection system for your filler between filler outlet and infeed of the capping machine consisting essentially of: - High-pressure pump including frame - Heating system as well as valves - Nozzle unit - Electrical control cabinet - Pressure tank A technical description including pictures can be found in the attachment by an offer.