pressure vessel used for sale

functionality: heating/cooling, agitator, overpressure, vacuum,condition: unused,volume: 3.535,vacuum: 1,0,max. excess pressure: 6,0,max. allowable working temperature: 150,bottom: Klöpperboden,construction: standing,stand type: feet height adjustable,quantity legs: 4,heating/cooling (filter bar): available,diameter inside: 1.400,cylindrical height: 1.650,total height: 3.553,year of construction: 2008,Technical documentation: drawing, various documents,manhole: in the topsoil (DN 600), nameplate: Yes,technical equipment: Level indicator (without guarantee), spray head, crane eyelets,outlet: DN32 DIN 11851

Injection material blowing pressure: 0.5-6bar, Drive: variable gearbox Lenze, Elements: material hose, blow-out nozzle, directional valve, swivel lever, exhaust valve, valve, nozzle, pressure reducer, handwheel, slide gate, control cabinet, control switch, water hose, needle valve, nozzle mixing body. Overhauled by the manufacturer in 2014. With pressure vessel and documentation. An on-site inspection is possible.

Equipment: heatable/coolable, insulation, overpressure,condition: brand new,volume: 3,850,max. overpressure: 3.3,lower bottom: eccentric cone,design: upright,stand shape: feet height adjustable,number of feet: 4,heating/cooling (filter bar): available,temperature control cylinder: half-tube coil,temperature control underbody: double jacket,insulation: available,insulating jacket: hermetically welded,insulation material: PU foam,material insulation jacket: stainless steel,insulation thickness: 70,diameter inside: 1.600,diameter outside: 1.800,cylindrical height: 1.250,total height: 3.900,technical documentation: drawing,

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank -Pressure vessel: Compressed air tank on a mobile chassis -Container capacity: 250 liters -Operating pressure: max. 30 bar -Position: lying on transport frame -Dimensions: 2000/550/H1010 mm -Weight: 363 kg

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

System for pressure increase or constant pressure maintenance, e.g. for the fresh water inlet of bottle washers 1.5 m³ stainless steel tank with frequency-controlled pump (see pictures for performance) Level control

Pressure differential pressure switch -Type: QBM81.B -for flow and filter monitoring in air ducts -Setting range: 50...500 Pa Technical specifications: -Switching difference: adjustable -Output: EPU 250 V, 1(0.5) A -Weight 0.2 kg

Ø 100, class 1.6 0 - 25 bar Version: Vertical Display range: 0 - 25 bar Scale graduation: 0.5 bar Materials: Housing 1.4571, measuring system and connection, viewing panel multi-layer safety glass Connection: 1/2'' bottom (AB) Plate spring pressure gauge

Cat.-Nr. 11-3330 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 11-3325 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-No. 13-0265, 13-0264 in very good condition No. 174/91 resistant to pressure 3 bar Jacket: 6 bar Speed control with agitator 160 ° C temperature resistant Manhole and sight glass illuminated TÜV certificate available! CIP cleaning nozzles, etc. The price applies to a container. All prices are ex works plus legal VAT Freight costs: After delivery Delivery: from D-97753 Karlstadt Karlsburg Subject to prior sale

Stackable container Manufacturer GEMP and UDE inside polished Pharma Manhole diameter 450 mm Drain valve DN 80 Weight: 300 kg Number of pieces: 8 pieces available

Cover with filter Drain valve in the bottom high-quality Manufacturer: Fa Edak AG Schaffhausen Switzerland Jacket pressure: 2 bar Temp inside: 96 ° C Jacket: 96 ° C Capacity: 106 l No.: 1221 Year of construction: 1990 Dimensions: LWH = 800 x 600 x 1200 mm

Used double-walled agitator 47 litres with agitator 0.12 KW Double-walled stainless steel container, approx. 47 litres container volume, externally heated up to 70°C with temperature control unit / water bath Haake DC 10 and circulation pump. With aluminium traverse made of profiles 45 45 mm and slow running agitator. Agitator with geared motor: Geared motor Georgii Kobold, 230 volts, 0.12 kW, n1 = 2800 rpm, n2 = approx. 20 rpm. Shaft: precision stainless steel shaft D20, length 300 mm, diameter 20 mm, Material stainless steel. Rigid clutch, bare, material stainless steel Stirring organ: Two-winged slanted blade stirrer, diameter 244mm, material stainless steel. Wings adjustable at angle Electric distribution box with 3 sockets 230V, circuit breaker and FI.

Vessel reverser in Exchange

- in V2A - mobile - 1 m diameter - 900 mm high - 700 l capacity - with agitator 0.55 kW and 99 rpm - with full and empty detector

Various pressure expansion vessels with solid steel gas filling, built in 2008, unused 2x Pneumatex Statico SU 500.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 500L, 6 bar, diameter: approx. 680 mm, total height with feet: approx. 1588 mm, permissible temperature range: -10°C-120°C 4x Pneumatex Statico SG 1000.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 1000L, 6 bar, diameter: approx. 850 mm, total height with feet: approx. 2189 mm, permissible temperature range: -10°C-120°C (unused) 3x Pneumatex Statico CG 3000.6 E Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 3000L, 6 bar, diameter: 1,300 mm, total height with feet: approx. 2936 mm, permissible temperature range -10°C â 120°C (unused)

Manufacturer: Seybert-Rahier, Immmenhausen Pressure max: 8 bar Dimensions LWH: 1300 x 650 x 1300 Weight: 80 kg

Vessel for Melting Manufacturer BINDER 1000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available (from 2008)!

Vessel for Melting Manufacturer BINDER 2000 Litres for Cosmetic and Food Stuff used – in very good condition Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160 °C Temperature resistant Manhole and Sight Glass with lighting CIP cleaning injection nozzles aso. TÜV-certificate available (from 2008)!

Vessel for Melting Manufacturer BINDER 1.000 Litres for Cosmetic and Food Stuff used – in very good condition no. 174/91, max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available!

Vessel for Melting Manufacturer BINDER 1.000 Litres for Cosmetic and Food Stuff used – in very good condition no. 175/91, max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso TÜV-certificate available!

Mixing vessel Company: Bäuchle & Sohn N°: 2193/1/2 Built: 1987 Double jacket pressure: 3 bar (insulated) Indoor and outdoor temperature: 150°C Content: max. 400 l min. 50 l Wiper agitator, speed-controlled Jet-flow agitator with 2 stages Temp meter, switchgear Dimensions LWH: 1100 x 970 x 2220 mm Weight: approx. 600 kg

TURNING ROLLERS LAMBERT JOUTY CZ100 max load capacity 100 tons auto alignment good conditions, ready to work!

Agitator 150 litres with gearbox Rexroth 0.18 KW, i = 25 and propeller stirrer 150 mm Container: Single-walled stainless steel container 150 litres with drain tap. Rollable aluminium frame with aluminium profiles 45 45 mm. 4 steering wheels, 2 of them with brake. Geared motor: Rexroth, 3 x 230/400 volts, 0.18 kW, i = 25, n2=53 rpm. With motor protection plug. Shaft: precision stainless steel shaft D10, length 850 mm, diameter 10 mm, Material stainless steel Coupling: 2 clamping sets 17 to 10 mm, material stainless steel Stirrer: three-winged propeller stirrer, diameter 150 mm, material stainless steel 1.4581

Preparation vessel for liquids 75L Giusti Capacity: 75 litres Maximum internal pressure: atmospheric Maximum external pressure: 3. 3 Minimum internal pressure: atmospheric Minimum external pressure: atmospheric Internal pressure test: water filling External pressure test: 5. 0 Internal working pressure: atmospheric External working pressure: 3. 0 Internal and external temperature: 150 °C

Stainless steel IBC container, bulk container, capacity 750 liters Content: 750 Ltr. Operating pressure: pressureless Year built: unbek. Herst.: unbek. Material: Stainless steel 1.4301 Design: rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, Dome lid 400 mm with bayonic closure in stainless steel, drain disc valve DN 250 (250 mm) in Edelstah,l with hand lever, 1" threaded connection in the upper floor last use: food Height: approx. 1,450 mm Width/depth: approx. 1,180 mm / approx. 980 mm

Stainless steel silo container BSIF 550 Ltr. Content: 550 Ltr. Operating pressure: pressureless Year built: unknown Herst.: Shepherd Material: stainless steel 1.4301 container, frame iron painted Design: Rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, dome lid 400 mm, drain disc valve DN 150 in stainless steel, very well maintained condition, vent cap in the upper lid, stainless steel pipe DN 80 in funnel, funnel inclination 45° last use: granules Height: approx. 1,480 mm Width/depth: approx. 1,200 mm / approx. 800 mm

Mixing tank with agitator Content: approx. 80 l LWH: 500 x 450 x 1100 mm Weight: approx. 30 kg

Agitator containers Volume: 150 l Built: 1987 with propeller mixer Power: 0.55 kW 1380/224 rpm LWH: 750 x 700 x 1950 mm

Agitator containers Volume: 150 l Built: 1987 with propeller mixer Power: 0.55 kW 1380/224 rpm good condition LWH: 670 x 670 x 1950 mm

Melting vessel Manufacturer: Binder GmbH (Crailsheim) Factory No.: 1) 6550/1 2) 6550/3 3) 6550/6 4) 6550/8 with agitator, with controlling system Power: 0.18 kW Speed: 1320 rpm very good condition Year of construction: 1997 LWH: 900 x 900 x 2100 mm

IBC stainless steel container transport container electrically heated 1,000 ltr. Content: 1.000 Ltr. Working pressure: max. vapour pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded-on construction for use by forklift or pallet truck, Insulating sheath with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Outlet with butterfly valve DN 80 reduced to DN 50, lid DN 400, 1 x safety valve, 1 x Kamlock coupling 1", Total weight 381 kg final use: Food Height: approx. 1,670 mm Width/length: approx. 1,200 mm/1,100 mm

Spare parts for the cleaning system HAMO / Amsonic, type T-840 consisting of the following parts: - Feeding transformers - Parvalux gear motors - Diaphragm pumps & valves - Drain valves - Pressure pipes - Level switch - Dosing pumps - Flow meter - PH probes - Conductivity transmitter

Binder stainless steel mobile vessel, volume 335 l, with isolation jacket, permitted operating pressure inside vessel -1/4 bar, permitted internal vessel operating temperature max.150ºC, test pressure 7.1 bar, 2 sight glases positioned in the lid (diameter 50 & 90 mm), pressure manometer, lid connections for product inlet, ventilation and bleeding, 1 spare connection and CIP-System with spray balls with 360º spraying area, bottom outlet, vessel inner diameter approx. 800 mm, vessel outer diameter approx. 900 mm, total height of vessel approx. 1800 mm, net weight approx. 310 kg, on wheels (8 units available).

Stainless steel container 1000 l Manufacturer: Willi Lermer Wiesbaden Volume 1000 l stackable 10 pcs available Very good condition, straight from production!

Mixing tank 80 liters REITZ MB80 for bulk materials Used open mixing tank approx. 80 liters with geared motor 0.75 KW and inclined blade stirrer 700 mm Application: Mixing of powdered materials. Slow-running, high-torque agitator for powdered mixes. High torque with low energy consumption. Stirred tank: Mobile mixing tank made of stainless steel with bottom slide for draining the mix. All boilers are refurbished and clean. Capacity approx. 80 litres Geared motor: Geared motor Lenze 0.75 KW, 230 / 400 V, 3 phases, 50 Hz, 1410 rpm, IP 55, ratio i = 56, 25 revolutions per minute at shaft output. With motor protection plug to protect the geared motor. Shaft: stainless steel shaft diameter 20 mm, length 500 mm, material 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 700 mm, material stainless steel 1.4571

Stock # U2421-1 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. New 2003. Last time used in chemical production.

Stock # U2421-3 Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (PL) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) carbon steel legs. New 2003. Last time used in chemical production.

Stainless steel tank, upright with 500 litre volume, operating temperature 20°C, operating pressure 16 bar,

Stirring tank 150 liters with agitator 0.6 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material: Stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244 mm, material stainless steel 1.4581, blade adjustable in angle.

plastic container standing 3x12 m, free loading

VMI 3500L mixing vessel 2001, Stainless, 3500L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

VMI 2936L mixing vessel 2001, Stainless, 2936L jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with Inoxpa centrifugal pump, 3Ph