pressure vessel used for sale

Stirring tank REITZ RB300LRW037250 Stainless steel tank 300 liters with agitator 0.37 KW, used gear motor KEB 30 rpm. Stainless steel stirring tank 300 liters with outlet tap 3/4-inch. Diameter 630 mm, container height 990 mm. Tripod height 425 mm. Gear motor: Used gear motor KEB, 3 x 230/400 volts, 0.37 kW, n1 = 1350 rpm, n2 = approx. 30 rpm. With motor protection switch. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, material stainless steel 1.4301. With rigid coupling 28/20 in stainless steel 1.4571. Stirring organ: Four-bladed inclined blade stirrer, diameter 275 mm, material stainless steel 1.4571. Very slow-running, high-torque agitator.

VMI 2400L high shear mixing vessel 2012, Stainless, 2400l jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph

NNP 300l holding vessel Stainless 300L holding tank horizontal, with level detection

Stock# U2474 Used vertical, mobile, stainless steel AISI 316L reactor by BOCCARD (France) with a total capacity of 577 l. Reactor has a working volume of 300 l and is designed to operate at pressures ranging from -1 to 0,5 bar and temperatures up to 110 ºC. Internal dimensions: diameter 880 mm, length of straight wall line to inspection manway 800 mm. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 35 l and is designed to operate at pressures up to 3,5 bar and temperature up to 145 ºC. The jacket is insulated and clad with stainless steel sheet. Reactor has welded dished top equipped with inspection manway, with internal diameter 350 mm. Also in the top head there is a vertically downward installed homogenizing mixer, directly driven by an electric motor with a power of 2.2 kW, 400 V, 960 rpm, 50 Hz. Reactor has welded dished bottom with central dis ...

Matrix Sri Carbonator/Nitrogenator Semi Automatic Carbonator/Nitrogenator Skid mounted unit complete with stainless steel control panel, mass flowmeter for gas and inverter controlled pump. Includes serpentine mixing pipe and stabilization column for finished product. Manufacturer. Matrix Sri Model: PROCAR AS3 Output 1500 to 3000 litres per hour Incoming Beer Temperature 4 Degrees C Incoming Beer Pressure required is 1.5 to 2.5Bar Minimum Carbonation value 3grammes per litre Maximum Carbonation value 6 grammes per litre Nitrogen is not Dissolved Air pressure – Minimum 6Bar Electrics 415v/50Hz/3Phase This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Agitator tank with 3800 l capacity. Container in stainless steel 1.4301. Agitator motor 11 kW, 98 rpm.

Manufacturer: ETSCHEID Content: 1500 l Equipped with agitator With integrated cleaning unit (CIP) Including cooling unit Condition: very good

Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm

Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintance, 13Kw motors, highshear overhauled 2017, level detection, 50mm discharge pipe, 3Ph

weight max.:ca. 30 t gear diameter:320 mm weight of the machine ca.:3 x 950 kg dimensions of the machine ca.:3 x 2020 x 870 x 1100 mm

500 Liters Cylindrical Standing Stainless Steel Tank Polished interior Hinged lid on the top floor Cone

200 litre stainless steel tank Content: 200 litres Technical specifications : single-walled container, open at the top

Micro Brewery Braumeister 500 L - 2018 The Braumeister is the ultimate automated brewing system. This Brewmeister has been brewing only 172 brews since new and thus is in new like condition. For simplicity, ease of use and ease of cleaning it can’t be beaten. A 5 step fully automated Speidel Gärmeister brewing control system makes brewing a breeze. The 500-litre system is ideal for a micro-brewery or for a craft brewery. Wheels, a hoist, compact, automated, jacketed for cooling and with a whirlpool operation, this is the ultimate small commercial brewing system. Technical Characteristics Manufacturer Speidel GmbH Model Braumeister 500 Litre Manufacturing year 2018 Capacity approx. 500 l finished beer / brew Total brews made 172 only Quantity of malt Max. 120 kg per mash Plato gravity scale Up to 17 °P Control system Speidel Gärmeister Heating spiral capacity 6 x 3000 Wa ...

6 containers 200 litres made of V2A, single-walled, used Design: upright

Stainless steel tank horizontal Manufacturer Capacity 5000 litres single-walled Metrics: Diameter 1.60 m Length approx. 3.70 m

Mobile 290L vessel incl. discharge with valve, inspection glass, etc.

Stainless steel tanks Capacity 250 litres Cylindrical stainless steel tank standing on feet single-walled, hinged lid Agitator from above

A Hermann Rothenburg stirring and mixing vessel is available. Operating pressure vessel/jacket: 2bar/0.5bar, volume vessel/jacket: 1000l/180l, max. temperature vessel/jacket: 180°C/180°C. On-site inspection is possible.

Stainless steel tanks Manufacturer: SAV Type 20062 Capacity 2260 litres Year of construction 2000 Operating temperature product room 95 °C Double jacket for heating and cooling, pressure-resistant up to 8 bar Material V4A

Storage tank 1000 ltr., stainless steel, with double jacket, 2 spouts and level gauge, as good as new condition

Mixing and homogenizing plant capacity 50L Pre-melting tank 50L extra price Euro 6.500,--

1000L Stainless Steel Tank | Forming Technology Hausach | UN Approval | V4A 1.4571 | used For sale is a used 1000 liter stainless steel tank from the company Umformtechnik Hausach GmbH. The tank is made of high-quality stainless steel 1.4571 (V4A, AISI 316Ti) and has UN approval (UN 31A/Y/11) for the storage and transport of dangerous goods. Ideal for applications in the food industry, chemical, agriculture or industrial storage. The tank is in well-maintained condition, tight, clean and ready for immediate use. It has a sturdy tubular frame construction with forklift pockets and a secured dome lid. ⸻ Specifications: • Capacity: 1000 liters • Material: Stainless steel 1.4571 (V4A, acid & chemical resistant) •Ab. Total weight: 2100 kg • Curb weight: 228 kg • Minimum wall thickness: 1.5 mm •Ab. Filling/emptying pressure: 0.10 bar • Test overpressur ...

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Various agitator tanks approx. 700 L attachment size

Mobile 150L vessel with passiv-doubleflap. In M4V steel.

approx. 500 litres stainless steel container Type: Flow tank Content: approx. 500 litres Technical specifications : Swimmer V2A Dimensions approx: Diameter outside 1,180 mm, cyl. Height 500 mm, total height 1,000 mm Outlet DN 65

200 litre stainless steel tank Manufacturer : Ahrens & Bode Pressure vessel Content: 200 litres Technical specifications : cylindrical stainless steel container on feet, single-walled Conical spout Operating pressure up to 5 bar Metrics: ca. Diameter: 360 mm, diameter lid 500 mm, cone 400 mm Cylindrical height: 1,840 mm Enema: 3x DN 50 Discharge: DN 65 Documents: Nameplate

1200 litre process vessel Manufacturer Prai HiPurity Systems Ltd. Type IMV – 1200 W, H – 14471 unused Year of construction 2015 electro-polished Double-jacket, pressure-resistant Product room 3 bar Double jacket 4 bar Operating temperature 165° C Magnetic agitator on the underbody, Fabr. Merck Millipur Type GMP Drive 2000 Extensive documentation available, including qualification documents

Process Vessels Manufacturer : Küchenbauer Capacity: 194 litres Technical specifications : Cylindrical stainless steel container, hanging, claws, without frame Double-jacket, steam- or water-pickled, pressure-resistant up to 3 bar, operating temperature double-jacket: 140 °C Agitator Interior Operating temperature 100 C° Lid

Melting Vessel Capacity: 450 litres Technical specifications : cylindrical 450 litre melting tank, Material: stainless steel, Double jacket can be heated with water or steam, standing on feet was used to melt lard Food safe Metrics: ca. Diameter: 1,000 mm Outer diameter : 1,100 mm Cylindrical height: 550 mm Height: 1,500 mm

Process Vessels Manufacturer: Schwarte-Milfor Capacity 750 l Cylindrical process vessel standing on feet, hermetically welded insulation, Double jacket, WGR MR 125 magnetic agitator on the bottom, agitator flange on the underbody (drive missing) Product space: vacuum and pressure resistant -1/3 bar, operating temperature -10/150 °C Interior polished, double jacket: Pressure-resistant up to 3 bar, operating temperature 150 °C the measurements are: Total height approx. 2,300 cm Diameter approx. 1,050 cm cylindrical height approx. 1,300 cm Feet 300 cm high Double jacket inlet and outlet DN 25 Last Assignment Pharmacy very good condition

ID3558 Tanker year/Baujahr 1953 Tanker, manufacturer: Schiffswerft Hilgers, Rheinbrohl, Germany, length 81.89 m, width 8.20, max draft 2.54 m, max deadweight capacity 1172 t, max displacement 1548 cbm, 1 main engine Volvo Penta 880 KW (overhauled 150 hours ago), ship has a single hull and a single bottom. The ship can be brought into dry dock with new papers. Tanker, builder: Hilgers Shipyard, Rheinbrohl, Germany, length 81.89 m, width 8.20 m, maximum draft 2.54 m, maximum deadweight 1172 t, maximum displacement 1548 cbm, single main engine Volvo Penta 880 kW (overhauled 150 hours ago), single hull and single bottom. The vessel can be drydocked with new documents

1 tank for storing process water for e.g. supplementing a CIP system Capacity 300,000 l, insulated, with poured concrete floor Manhole and agitator at the bottom of the side with handrail at the top and ventilation hood at the top D = 4.14 m, length approx. 14 m Dismantled filed in the dairy farm

100 litre process tank Manufacturer : Hermann Waldner Content: 100 litres Technical specifications : cylindrical standing stainless steel tank with double jacket, insulation and agitator Material container 1.4435 Operating temperature 80 °C Material double jacket 1.4404 Pressure-resistant 2.5 bar Operating temperature 90 °C Capacity 22 litres Equipment: Propeller agitator Spout at the bottom center Agitator from above Documents: Nameplate

Process vessel upright Capacity 545 litres Manufacturer Concept Product space: Pressure-resistant/vacuum-resistant +3/-1 Operating temperature 143 °C Polished interior Double jacket for heating and cooling: Pressure-resistant + 2 bar Operating temperature 143 °C Mobile Agitator flange available, no agitator Pharmaceutical version

Electrically heated process vessel capacity 90 litres Filling device Manufacturer: Haas Type FMSX composed of: Electrically heated agitator tank with a capacity of approx. 90 litres Heated Mouvex piston pump, electric heater, control cabinet with Siemens PLC and FU for pump and agitator, in a mobile stainless steel frame.

Process Vessels Net capacity 250 litres, gross capacity 339 litres Pharmaceutical version Agitator Polished interior Product space: Pressure-resistant up to 2.5 bar, operating temperature 138 °C Double jacket: Pressure-resistant up to 4 bar, operating temperature 151 °C mobile

2000 litre process vessel Manufacturer: TSA Process Equipment WFI Containers NEW in original packaging Year of construction 2020 electro-polished Double-jacket, pressure-resistant Operating temperature product room 130 °C Operating temperature sheath 170 °C Accessories

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel tank, lower third with double jacket for heating and cooling, upper part single-walled, no agitator Product space: pressureless, operating temperature 30 °C Boiler room: 1 bar, operating temperature 50 C Diameter 2.40 m, total height approx. 4.10 m

General SKU200T008 LocationBarneveld Makeullmann & Co Gmbh No.5225-A1 Year of construction2001 Pressure Working pressure0 Bar Main Features MaterialStainless steel Volume3000 Ltr. Motor7.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4571 (316Ti) Closed stirring vesselcheck Capacity3000Ltr. Vessel sizesDia 1800x1800mm Conical bottomcheck Flat top sidecheck ManholeDia:500mm Top connectionsDN100(3x), DN 50(2x) OutletDN80 Max. temperature90°C With propellor stirrercheck Motor1,5kW, 230/400Volt, 1410rpm Speed mixing shaft334rpm Information Mounted on legscheck Floorspace2,10x1,8m Total height2,9m Weight600kgStirring vesselsUllmann & Co.Stirring vessels > Stirring vesselsBrand > Ullmann & Co. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worl ...

Cylinder vessel with double jacket (heatable), stainless steel 1.4571, length 4.9ß0 mm, diameter approx. 1200 mm, weight 2000 kg, vacuum resistant, longitudinally installed agitator shaft with brushes, agitator 2.2 kW approx. 20 rpm, inlet and outlet each front, condition: used, from plant dismantling (vacuum evaporator)

General SKU309X465 MakeHaagen & Rinau LocationBarneveld TypeUnimix Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) Information No.300975/2290 Year of construction1996 Mounted on legscheck With switchgearcheck ( as is) Floorspace7x2,5 m Total height± 3.8m ...

General SKU419T1316 Make3C France LocationBarneveld CEcheck TypeSKID Fondoir Mobile 150 Liters Girard Pressure Working pressure0.5 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume230 Ltr. Motor3 KW Specified Features - Stirring vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselcheck Capacity230 Ltr. (150 Ltr. net) Vessel sizesdia. 675x746 mm Dished bottomcheck Dished top sidecheck With covercheck Top connectionsDN76 OutletDN25 With jacketcheck 30 Ltr. Max. temperature140 °C With turbo stirrercheck (dia. 150 mm) Motor3 kW Speed mixing shaft1500 rpm Information No.6158 Year of construction2000 Mounted on legscheck With switchas is Floorspace2,3x1,3 m Total height2,3 m Weight955 kg Extra Specificationswith: stirring vessel: 3C France, Tremie 15 Liters: Ø300x364 mm, 22 Ltr. (15 Ltr. net), vessel insulated, w ...

Unused Briggs of Burton process vessel, approximately 1,200 liters, in 316/316L stainless steel. The unit measures approximately 1,200 mm in diameter x 870 mm on the straight side. The unit features a bolt-on domed lid and welded hemispherical bottom. Internal design pressure rated for 10 bar/full vacuum in a range of -20 to 210 °C. 304/304L stainless steel outer jacket, rated for 10 bar design pressure/full vacuum in the range of -20 to 210 °C. The unit has a 316/316L stainless steel top-entry gate type agitator equipped with 11 kW motor/gearbox driven PTFE wall scrapers. The unit includes Silverson Model BE600 Bottom Inlet Emulsifier in 316/316L Stainless Steel, Driven by 22 kW Motor. The unit is mounted on 304/304L stainless steel legs. Volume Total capacity 1200 L Material Stainless Steel 316/316L Shirt or mid-calf material Stainless Steel 304/304L Technical characteristics ...

Vertical stainless steel tank with a total capacity of 750 litres About 3 legs. Kollper Funds. DN50 bottom outlet DN25 DN40 Top Connections Side connections DN25 DN50 DN80 Volume Total capacity 750 L Material Stainless steel Equipment dimensions Inside diameter 900 mm Body Height 1000 mm Transportation Information Width 1000 mm Height 2050 mm Documentation No documentation Status In your state Manufactured by Unbranded

Stainless steel vacuum vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C , down two outlets DN50, mounted on stainless steel frame 1220x1020mm total height 2800mm

Diessel stainless steel vessel 170 Ltr. with propeller stirrer and heating for oil phase, works on atmospheric pressure, on wheels, down outlet diameter 26mm

Two identical cooking kettles Steiner are available. Years of manufacture: 2009/2010, Volume: 300l, Heating type: steam, Max. steam pressure: 10bar, Kettle diameter: approx. 1000mm, Kettle depth: approx. 500mm, Machine dimensions X/Y/Z: approx. 1950mm/1200mm/1200mm, Weight: approx. 200kg. Documentation available. An on-site inspection is possible.

VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"

ATEC 1220 Ltr stainless steel vessel with anchor stirrer with scrapers (5,5kw), jacket 250 Ltr, two heaters (2x7,5kw), inlet/outlet DN50, for atmospheric pressure, control cabinet, speed controlled stirrer, on wheels