pressure tank used for sale

Note: The IBCs were filled with an acid for feed (main ingredient formic acid). Is not dangerous goods according to ADR, but subject to identification according to Hazardous Substances VO. The containers are empty, but not cleaned. The scope of delivery includes: 01x Water tank, used Total width: approx. 1,000 mm Total depth: approx. 1,200 mm Total height: approx. 1,160 mm Capacity: 1,000 litres incl. tap on metal, wooden or plastic pallet Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

50,000 litre underground tank - brand new - according to DIN-EN 12285-1, single-walled, raw inside, professional insulation on the outside. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank has a DN 600 manhole with dome cover, screws and seal. Containers from the factory, freely charged. On request, the tank can be completely equipped with a fire water suction connection, the tank then meets the requirements of DIN 14230 - underground fire water tanks: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction pipe DN125 made of stainless steel - V2A, with Storz A fixed coupling and Storz A blind coupling, - 1 pcs DN100 vent pipe with stainless steel hood - V2A, - 1 piece anti-vortex plate mounted on suction line, - 1 sign "Extinguishing water extraction point", - 1 pc. soun ...

1,000 litre water tank/ storage tank made of V2A Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 2000 mm Cylinder height 1100 mm Diameter 1000 mm Weight 170 kg Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Number of feet 3 Total height 3350 mm Height 2500 mm Diameter 2200 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Isolated design Description Topsoil: Cone bottom with 3% slope Threaded Socket DN50 Manhole 500 round Tank cylinder: Insulation 10 cm Ladder hooks Dip shaft sleeve with thermometer analogue Sewage DN100 Vapour trigger DN100 top Subsoil: Inclined cone base 3%Bevel Forward-drawn residual drain pipe DN120 3 feet with domes, height adjustable

Properties Volume 10000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1200 kg Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 9400 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 10000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 1200 kg Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Properties Volume 9400 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 4000 mm Height 3000 mm Diameter 2000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: 3 % inclined cone base Manhole round DN400 2 crane eyes with DN50 filling line pulled downwards Tank cylinder: Vapour trigger top DN100 left Ladder hooks Sample tap 5/8" Dip shaft sleeve with temperature display digital Clear drain with flange DN100 Subsoil: 3 % inclined cone base Forward-pulled residual drain pipe with flange DN100 4 profiled feet with domes, height-adjustable with washers

Features: Volume 11200 L Material V2A (AISI 304) 1.4301 Manufacturer: Rieger Cubic design Number of feet 4 Total height 2500 mm Length 5250 mm Width 1450 mm Surface marbled on the outside Surface inside IIID Last Use Food Description Topsoil: Flat bottom 1 reinforcement profile in the middle 4 crane eyes Airlock DN50 Cylinder: 4 cool pockets on the side Level indicator with bar and scale Manhole oval Tasting tap Nozzle Flap Size 37 Ladder hooks Sewage drain DN50 with angled seat valve Underbody: Flat bottom with 3% slope forward-drawn outlet surround with disc valve DN50 4 profile feet with domes – height-adjustable 4 reinforcement profiles

Properties Volume 8100 L Material V2A (AISI 304) 1.4301 Vertical design Number of feet 3 Total height 3350 mm Height 2500 mm Diameter 2200 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Weight 2000 kg Manufacturer: Gross Built in 1993 Working temperature 20 C Isolated design

Hydraulic pump, traction motor, drive motor, servo tank, hydraulic tank, servo oil tank -Manufacturer: Jungheinrich, servo tank hydraulic tank from pedestrian stacker type ERC 205 -Add-on parts: see photos -Number: 2x container available -Price per piece -Dimensions: 270/220/H370mm / 270/215/H360mm -Weight: 2.2 kg / 2.9 kg

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, vacuum container standing, galvanized -Contents: 455 L -Operating pressure: -0.6 bar / max. 16 bar -Accessories: including attachments see photos -Number: 2x containers available -Price: per piece -Dimensions: 860/650/H1610 mm -Weight: 374 kg/piece

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, pressure vessel vacuum vessel standing -Contents: 455 L -Operating pressure: max. 13 bar -Accessories: including attachments see photos -Quantity: 1x container available -Dimensions: 1020/755/H1900 mm -Weight: 518 kg/piece

The liquid storage tank is customized da wheels can rotate separately. Was intended as a project. 13000L +- Auction-ID: A3-43507-34084

• Stainless steel storage tank made of AISI 304 (V2A) • Volume: approx. 600 litres • Insulated design for temperature maintenance • Suitable for food applications • Horizontal design on feet • Robust industrial design • With manhole / openings at the top • 2 x hand hole Ø 180 mm • Inner dimensions approx. 1035 x 1400 mm • Spout approx. 40 mm • Used, good condition • Ideal for food, pharmaceutical or industrial use Note for non-EU buyers: Buyers outside the European Union are responsible for all costs of customs clearance as well as applicable import duties, taxes and fees. Auction-ID: 04H-RG5-1

Joskin Euroliner 24000TRS Manure/Water Tank 24,000 litres tank capacity Year of construction: 2014 3 axles 750/60 R30.5 tyres Battioni Pagani MEC 5000 D60 pump Ball head connection Steering axle Air brakes Swivelling arm with filling hose / suction hose Rotatable nozzle on top of tank Joskin control box Rear lifting device PTO drive including PTO LED Lighting Ball head connection Steering axle Air brakes Used as a water tank in recent years Auction-ID: A1-40134-32

Turbine Turbine mileage: 30,000 hours Counter-pressure turbine Manufacturer KKK Initial commissioning in 2002 Type: CFR5 G6a Power Max: 2500 kW Operating power: 2200 kW, Speed 23000 rpm, Fresh steam pressure: 65 bar, Fresh steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002, Total steam forming station renewed from 63 bar to 2.5 bar in 2002, El. Generator Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA renewed, Complete measuring, control, control technology of the turbine renewed, steam turbine renewed With Energy Installed boiler power Boiler I Coal Steam generation: 20 t/h, 63 bar, 495 C Boiler II Coal Steam generation: 13 t/h, 34 bar, 425 C Boiler III: Combined burner for oil and gas, steam generation: 20 t/h, 17 bar, 285 C General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic charcoal and  ...

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...

Power of the engine: 6.5 HP. Sl ė gis: 160 bar. Water access: 170 l/h. arna: 10 m.

Hydrostatic pressure transmitter with metallic measuring cell Manufacturer: Vega Grißhaber KG Type: D36G 0.2 EXB Continuous level measurement by means of a hydrostatic Pressure transmitter with metallic measuring cell in compact design with Threaded connection, flexible cable extension as well as one in the sensor housing built-in two-wire electronics with analog signal transmission 4 ... 20 mA/HART suitable for a separate evaluation device e.g. type VEGAMET 381 Ex. Scope The pressure transducer is a pressure transmitter for pressure and level measurements of liquids and viscous fillers with higher temperatures in the chemical, food and pharmaceutical industries. The pressure transducer offers the possibility to detect even the smallest measuring ranges from 0.1 bar. Your benefits - Highest measurement reliability even at rapidly changing process temperatures - High ...

Hilge pressure boost pump Mint from spare parts inventory for example, for CIP systems Motor NMG 160 MB242FF300D1 380-415 V 50 Hz 15 KW Q = 22, 5 m m³ / h H = 110 m n = 2900 / min

Used pressure filter made by Sfoggiatech, model SEB 1/P3. Filtration area 1 m3. Engine power 1,7 kW.

Used pressure leave filter, made by Padovan, type G10. -filtration surface 10 m2 -filter surface for waste liquid 0,46 m2 -24 filter plates with 745 mm diameter for liquid -6 filter plates with 330 mm diameter for cake -maximal cake thickness 22 mm, volume 216 dm3 -total chamber volume 655 L -working pressure 6 bar -nominal capacity 20.000 L/h -installed power 7,5 kW -dozing pump -rotary motor 4 kW -overall diamesions: lenght 2350 mm, width 1700mm, height 2100 mm

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Pressure piece for Chamber filter press R & B Rittershaus and Blecher in the format 800 x 800, 1000 x 1000, 1200 x 1200, 1500 x 1500, 2000 x 2000 available ex stock. Special designs according to customer requirements

Pressure piece for Chamber filter press Passavant new! in the format 800 x 800, 1000 x 1000, 1200 x 1200, 1500 x 1500, 2000 x 2000 available ex stock. Special designs according to customer requirements Spare parts for filter presses / filter presses all manufacturers and models .

Used pressure leave filter of diatomaceous earth, type Ecofilter, made by TMCI Padovan, capacity 10 m3, model TV3884.85. Tank volume 900 L, pressure 8 Bar. Temperature -10 +50°C. New 1985.

Pressure reducing valve in Exchange

Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary

; ready for operation

Rotary vane compressor Manufacturer: Becker Type: VT4.25 Voltage: 400V/50Hz Performance: 12 months Status: Generalueberholt and repainted Printing capacity: 25m3/h End printing: max+ +1 bar (rel) Zubehoer: Ready to use

Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building.

High pressure pump with a 12 bar President Graco. Model 210-007 To the funding of almost all media. Beam of 3cm to 20m possible, very powerful. Have 2 pieces.

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use

High-pressure pump - see pictures

Te Coop: Danfoss Druk druk transmitter MBS 3000 0-6 bar

Te Coop: Labom Druk transmitter CE 1110 Druk 0-25 bar

Te Koop: Samson for Type: 3804 Druk: 0.016 - 0.4 bar maximum druk 0.76 bar. Prijs is incl. BTW

High pressure cleaner, Cold water high pressure cleaner Manufacturer: Karcher Type: HD 700 Year of construction 1998 maximum pressure: 140 bar 9.5 L / min Drive: electric With hose package All information without guarantee

Rotary vane vacuum & compressor - dry running Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Engine: 400V DS Suction power: 100-140 m ³/h Discharge pressure / vacuum: Optional +-0.5 bar / +-1 bar / +-1.5 bar Status: Demo Warranty: 12 months; ready for operation

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

- 5.5 kW - 950 rpm

with 32 filling valves, 8head crowner and 8head aluminium screw capper with Siemens S7 control capacity: approx. 8,000 bottles/h in 500 ml bottles

Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG) Purpose: Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG / 10 KN maximum load). Without distance measurement. Manual lifting spindle press - Static pressing force 5 KN (0.5 to) - Portable, stable press frame made of polyamide PA 6G - Manual spindle stroke gearbox with spindle 20 mm, incline 5 mm - With handwheel diameter 120 mm and handle - Gearbox reduction 1: 10, per handwheel revolution 0.5 mm spindle path - This requires only very low hand force. - Table size 235 195 mm - Light width 190 mm - Stamp size diameter 70 mm - With 4 holes 8 mm for fixing a larger stamp plate - Very easy to operate by spindle and worm gearbox - Total weight approx. 25 kg Force measuring device: Weighing module with shear rod load cell for nominal load 1,100 kg.  ...

Stirrer/pressure boiler with agitator GOAVEC 77BX02 in good used condition, as returned by the customer. Completely made of stainless steel, double-walled, heatable (steam), 6000 litres capacity, working pressure up to 3.5 bar, test pressure 2.5 bar, pneumatically operated filling lid. Dimensions W/D/H 250/320/325 cm. Operating voltage 380 volts. More on request.