pressure tank used for sale

Properties: Volume 6130 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3700 mm Height 2560 mm Diameter width 1600 mm Surface inside 2B=IIIC ground Surface marbled on the outside 1 cold plate Digital temperature measurement Description Topsoil: Clapper bottom 2 crane eyes with central thread welding nozzle DN 100 to DN 40 with threaded nozzle DN 50 with fermentation valve DN 50 with check valve DN 50 Vent pipe DN 50 with threaded nozzle DN 50 and airlock DN 50 and T-piece 4 saddle feet Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CI ...

Turbine Turbine mileage: 30,000 hours Counter-pressure turbine Manufacturer KKK Initial commissioning in 2002 Type: CFR5 G6a Power Max: 2500 kW Operating power: 2200 kW, Speed 23000 rpm, Fresh steam pressure: 65 bar, Fresh steam pressure temperature: 480 C, Evaporation pressure: 1-17 bar, Investments in 2002, Total steam forming station renewed from 63 bar to 2.5 bar in 2002, El. Generator Leroy Somer, el. Power 2 MW, 525 V, 2488 kVA renewed, Complete measuring, control, control technology of the turbine renewed, steam turbine renewed With Energy Installed boiler power Boiler I Coal Steam generation: 20 t/h, 63 bar, 495 C Boiler II Coal Steam generation: 13 t/h, 34 bar, 425 C Boiler III: Combined burner for oil and gas, steam generation: 20 t/h, 17 bar, 285 C General overhaul of the entire plant from 2002 to 2004, steam generator renewed, automatic charcoal and  ...

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...

Power of the engine: 6.5 HP. Sl ė gis: 160 bar. Water access: 170 l/h. arna: 10 m.

Hydrostatic pressure transmitter with metallic measuring cell Manufacturer: Vega Grißhaber KG Type: D36G 0.2 EXB Continuous level measurement by means of a hydrostatic Pressure transmitter with metallic measuring cell in compact design with Threaded connection, flexible cable extension as well as one in the sensor housing built-in two-wire electronics with analog signal transmission 4 ... 20 mA/HART suitable for a separate evaluation device e.g. type VEGAMET 381 Ex. Scope The pressure transducer is a pressure transmitter for pressure and level measurements of liquids and viscous fillers with higher temperatures in the chemical, food and pharmaceutical industries. The pressure transducer offers the possibility to detect even the smallest measuring ranges from 0.1 bar. Your benefits - Highest measurement reliability even at rapidly changing process temperatures - High ...

Hilge pressure boost pump Mint from spare parts inventory for example, for CIP systems Motor NMG 160 MB242FF300D1 380-415 V 50 Hz 15 KW Q = 22, 5 m m³ / h H = 110 m n = 2900 / min

Used pressure filter made by Sfoggiatech, model SEB 1/P3. Filtration area 1 m3. Engine power 1,7 kW.

Used pressure leave filter, made by Padovan, type G10. -filtration surface 10 m2 -filter surface for waste liquid 0,46 m2 -24 filter plates with 745 mm diameter for liquid -6 filter plates with 330 mm diameter for cake -maximal cake thickness 22 mm, volume 216 dm3 -total chamber volume 655 L -working pressure 6 bar -nominal capacity 20.000 L/h -installed power 7,5 kW -dozing pump -rotary motor 4 kW -overall diamesions: lenght 2350 mm, width 1700mm, height 2100 mm

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Pressure piece for Chamber filter press R & B Rittershaus and Blecher in the format 800 x 800, 1000 x 1000, 1200 x 1200, 1500 x 1500, 2000 x 2000 available ex stock. Special designs according to customer requirements

Pressure piece for Chamber filter press Passavant new! in the format 800 x 800, 1000 x 1000, 1200 x 1200, 1500 x 1500, 2000 x 2000 available ex stock. Special designs according to customer requirements Spare parts for filter presses / filter presses all manufacturers and models .

Used pressure leave filter of diatomaceous earth, type Ecofilter, made by TMCI Padovan, capacity 10 m3, model TV3884.85. Tank volume 900 L, pressure 8 Bar. Temperature -10 +50°C. New 1985.

Pressure reducing valve in Exchange

Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary

; ready for operation

Rotary vane compressor Manufacturer: Becker Type: VT4.25 Voltage: 400V/50Hz Performance: 12 months Status: Generalueberholt and repainted Printing capacity: 25m3/h End printing: max+ +1 bar (rel) Zubehoer: Ready to use

Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building.

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use

High-pressure pump - see pictures

Te Coop: Danfoss Druk druk transmitter MBS 3000 0-6 bar

Te Coop: Labom Druk transmitter CE 1110 Druk 0-25 bar

Te Koop: Samson for Type: 3804 Druk: 0.016 - 0.4 bar maximum druk 0.76 bar. Prijs is incl. BTW

High pressure cleaner, Cold water high pressure cleaner Manufacturer: Karcher Type: HD 700 Year of construction 1998 maximum pressure: 140 bar 9.5 L / min Drive: electric With hose package All information without guarantee

Rotary vane vacuum & compressor - dry running Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Engine: 400V DS Suction power: 100-140 m ³/h Discharge pressure / vacuum: Optional +-0.5 bar / +-1 bar / +-1.5 bar Status: Demo Warranty: 12 months; ready for operation

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

- 5.5 kW - 950 rpm

with 32 filling valves, 8head crowner and 8head aluminium screw capper with Siemens S7 control capacity: approx. 8,000 bottles/h in 500 ml bottles

Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG) Purpose: Test press for single-axial pressure tests from 0 to 10 KN (0 to 1,000 KG / 10 KN maximum load). Without distance measurement. Manual lifting spindle press - Static pressing force 5 KN (0.5 to) - Portable, stable press frame made of polyamide PA 6G - Manual spindle stroke gearbox with spindle 20 mm, incline 5 mm - With handwheel diameter 120 mm and handle - Gearbox reduction 1: 10, per handwheel revolution 0.5 mm spindle path - This requires only very low hand force. - Table size 235 195 mm - Light width 190 mm - Stamp size diameter 70 mm - With 4 holes 8 mm for fixing a larger stamp plate - Very easy to operate by spindle and worm gearbox - Total weight approx. 25 kg Force measuring device: Weighing module with shear rod load cell for nominal load 1,100 kg.  ...

Pressure reducing valve, XLC 410, DN50, PN25, CSA, new We have set the lowest price for the new part on the market. If you have a UID number, we will be happy to issue you an invoice without VAT. New! The part was bought from a spare parts warehouse of a company and has never been in operation and is completely new. The CSA model XLC 410 is a hydraulically operated automatic control valve that reduces and stabilizes the pressure behind the valve to a constant value, regardless of fluctuations in requirements and pressure conditions in front of the valve. Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. Since we know that the device works, we give you a functional guarantee when you purchase it. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Uraca PÜV 8/200 Safety valve, bypass valve, overflow valve (pneumatic and silicone-free) similar but no Hammelmann, Woma, Kamat Ab. Operating overpressure: 50-200 bar Mpf. Flow rate: 10-125 l/min. Dimensions HxWxD: 260x113x113 mm Weight: 10.9 kg with MADER PEU-063-0010-I-P-M Built: 2012 (unused) VE water: Suitable for operation with demineralized water. Electro-pneumatic control: Takes over the switching command and the pressure adjustment of the valve. Slit seal: Serves the exact reproducibility of the response pressure. For more technical data, see data sheet. Keeps the operating pressure constant regardless of the nozzle assembly. Suitable for long-term overflow operation. Excellent dynamic behavior with rapid flow changes. Special features: Very high responsiveness, high response dynamics, cone can be used on two sides.

The blower is installed in a soundproofing hood with basic frame, safety valve, recop flap and attachments. The drive engine can be designed according to customer specifications. The compressor stage is completely outdated. You can also only purchase the GM 10 S level. If you have any questions, please call.

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx.  ...

With 48 filling valves 12head crown corker 12head screw capper

Mosca STF stowage clock conveyor; good condition; 1000mm length; 2 sensors; Speed adjustable. Mosca conveyor STF; good condition; lenght 1000mm; two sensors; I'm not.

- High pressure cleaner PTC Torpedo Eco Compact 16/200 and 21/160 similar but no Dynajet, Oertzen, Falch, DIBO, - Cold water / hot water approx. 95°C, steam 32 bar to 140°C and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Eco Compact 16/200 | 16l/min. at 200bar | Diesel engine: Yanmar L100N 8.5kW - Torpedo Eco Compact 21/160 | 21l/min. at 160bar | Diesel engine: Yanmar L100N 8.5kW - Dimensions and weight without water tank: 1200x930x1080mm, approx. 230kg - Dimensions and weight with 300 l water tank: 2000x1050x1100mm, approx. 300kg - Dimensions and weight with 500 l water tank: 2000x1050x1100mm, approx. 350kg Bhdw89emgf - 80/100 kW diesel burner with electronic temperature control - High pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hours - Manometer - Pressure regulator - Safe ...

- High pressure cleaner PTC Torpedo Compact 21/250, 21/350 and 15/500 similar but no Dynajet, Oertzen, Falch, - Cold water / hot water approx. 95°C and steam 32 bar to 140°C + high pressure steam up to 150°C at 200 bar (only for versions with 250 and 350 bar) and chemical-free weed-killing function with approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23l/min. at 350bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16l/min. at 500bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 hp (high-pressure steam) | 16l/min. at 250bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 hp (high pressure steam) | 16l/min. at 350bar | Di ...

PTC Torpedo Hot Water 140°C and Steam 140°C/32bar Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... - Skid on hot-dip galvanized frames with forklift tabs. The following hot water models are available: Torpedo 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW Torpedo 23/250 | 23l/min. at 250bar | Engine: Kohler KDW 1003 19kW Torpedo 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW Torpedo 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW Torpedo 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions with 680l water tank: 2,300 x 1,310 x 1,310 - Dimensions with 1000l water tank: 2,300 x 1,310 x 1,630 Bhgo2w7wfd - Empty weight: approx. 600 kg - High pressure pump: Comet RW/TW Premium - HD reel: manual or automatic with max. 1/2" or 50 m. 3/8" hose (included) - Water supply reel: manually with 50 m. 3/4" hose - Dies ...

PTC CTR-C cold water trailer similar but no dynajet, oertzen, falch, ROM, Rioned, plaid, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min. at 180bar | Petrol Engine: Honda GX690 17.7kW CTR-C 55/160 | 55l/min. at 160bar | Petrol Engine: Honda GX690 17.7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel Engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel Engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD reel: manually with max. 1/2" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Water tank: 400 l - Op ...

PTC JTR-C Cold Water Trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... Bhdwvn8yff - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: JTR-C 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW JTR-C 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW JTR-C 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW JTR-C 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW JTR-C 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 - Empty weight: approx. 600 kg - High pressure pump: HPP - HD reel: fixed and manual or hydraulic with max. 1/ ...

Zum Verkauf steht ein Fräskopf bei der Firma Pfauter ca.2012 komplett überholt.

Conductive transmitter; Conductivity meter for bottle cleaning machines. Used from warehouse dissolution. Very good condition see photos

PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...

PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only with version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW JTR-H 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW JTR-H 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions: 3,370 x 1,640 x 1,540 Cxombmv - Empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manually with max. 1/2" or 100 m. 3/8" hose (included) - Water supply ree ...