pressure tank model used for sale

Equipment: Agitator, overpressure,Manufacturer: H&K Behälter- und Edelstahltechnik,Condition: used,Volume: 1.300,Max. overpressure: 0.1,Design: standing,Stand shape: feet height adjustable,Number of feet: 3,Diameter inside: 1,140,Cylindrical height: 1,000,Total height: 2,950,Wall thickness shelves: 4,Wall thickness cylinder: 2.9,Year of construction: 2005,Manhole / dome: in the upper floor,Type plate: Yes,Equipment: Spray head,Outlet : 50,Remarks: Diameter manhole approx. 420 mm, last purpose: Pharmaceuticals,Material in contact with the product: V4A 1.4401/04 (AISI316),Material feet: Stainless steel,Manufacturer agitator:

Equipment: Agitator,Condition: used,Volume: 5.000,Design: upright,Base: feet,Number of feet: 3,Diameter inside: 1.890,Cylindrical height: 1.690,Total height: 2.450,Wall thickness underbody: 2.5,Wall thickness cylinder: 1.9,Wall thickness upper floor: 2.0,Manhole / dome: in the cylinder, in the top floor,Type plate: Yes,Equipment: Crane eyelets,Outlet: DN50 DIN 11851 ,Remarks: Diameter manhole top bottom approx. 425 mm, Manhole cylinder approx. 310 x 425 mm small dents in the cylinder, Last use: Spirits,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Power:

Equipment: Heatable/coolable,Condition: used,Volume: 72,500,Design: horizontal,Stand shape: feet,Number of feet: 12,Heating/cooling (filter bar): available,Temperature control cylinder: rectangular half-tube coil,Diameter inside: 2,800,Cylindrical length: 12000,Total length: 13,100,Type plate: No,Equipment: Spray head,Remarks: 6 reinforcement rings Fe with 2 feet each (Attention: note tank diameter lower than tank feet when setting up) Manhole in the front floor,last Intended use: Brewery,Material in contact with the product: V2A 1.4301 (AISI304),Material temperature control system: V2A 1.4301

Condition: brand new,Volume: 105,000,Specific gravity of the medium: 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: standing,Stand shape: flat bottom,Number of feet: 4,Diameter inside: 3,342,Cylindrical height: 12,000,Total height: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, disc valve,Outlet: DN80 DIN 11851 ,Remarks: Pictures shown are of an identical tank with a slightly smaller volume, material in contact with the product: V2A 1.4301

Manufacturer: Schwarz Apparate- und Behälterbau,Condition: used,Volume: 4,000,Lower bottom: flat bottom,Top bottom: screwed lid with hinged segment,Design: upright,Diameter inside: 1,590,Cylindrical height: 2,000,Total height: 2,200,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 1.5,Type plate: Yes,Outlet: available,Outlet : 48,Note: slight adhesions,Remarks: Tanks slightly out of round Spout is deeper than tank bottom (note when setting up) Sheet metal cut-outs in the lid Type plate only available for 2 tanks 1 tank with ball valve (see

Condition: factory new,Volume: 105,000,Specific gravity of the medium: 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: upright,Diameter outside: 3,342,Cylindrical height: 12,000,Total height: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/vent, disc valve,Outlet: DN80 DIN 11851 ,Remarks: Pictures shown are of an identical tank with slightly smaller volume,material in contact with the product: V4A 1.4401/04 (AISI316),material feet:

Equipment: Insulation, agitator,Condition: used,Volume: 125,000,Bottom floor: flat bottom with slope,Design: upright,Stand shape: Standing frame,Insulation: available,Material insulating jacket: painted steel,Diameter outside: 3,900,Cylindrical height: 11,000,Total height: 12,800,Wall thickness underbody: 4,Wall thickness cylinder: 4,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet : 65,Note: Pressure points on the insulating jacket, last purpose: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),agitator:

Equipment: Heatable/coolable, Insulation, Agitator,Manufacturer: Ullmann (ULLCO),Condition: used,Volume: 25,000,Design: upright,Stand: feet height adjustable,Number of feet: 4,Heating/cooling (filter bar): available,Volume double jacket: 510.0,Max. permissible Operating overpressure double jacket / pipe chamber / bar: 3.0, temperature control cylinder: double jacket,temperature control underbody: double jacket,insulation: available,insulating jacket: hermetically welded,material insulating jacket: stainless steel,diameter inside: 2,800,total height: 6,300,manhole / dome: in the top floor ( 430),nameplate: Yes,equipment:

Equipment: Insulation,Manufacturer: TUCHENHAGEN,Condition: used,Volume: 30,000,Max. permissible Operating temperature : 80,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Insulation: available,Insulating sheath: hermetically welded,Material insulating sheath: stainless steel,Diameter inside: 2,900,Cylindrical height: 4,500,Total height: 7,000,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation, crane eyelets,Outlet: available,Outlet : 65,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 ( AISI304),Power: 1.2 /

Equipment: Insulation,Condition: used,Volume: 102,000,Lower floor: Flat floor with slope,Design: upright,Standing form: Standing frame,Insulation: available,Insulating jacket: riveted,Material insulating jacket: Painted steel,Insulation thickness: 100,Diameter inside: 3,350,Diameter outside: 3,600,Total height: 13,500,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: Ventilation/venting,Outlet: available,Last use: Food / dairy,Material in contact with the product: V2A 1.4301 (AISI304),Bottom Bearing: No,Current Interferer: No,Agitator Arrangement: Lateral on the Cylinder,Agitator Arrangement:

Manufacturer: Jorns Behälterbau,Condition: used,Volume: 150,000,Lower bottom: flat bottom with slope,Top floor: conical bottom,Design: standing,Standing shape: flat bottom with slope,Diameter outside: 4,000,Total height: 11,600,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/venting,Crane eyelets,Outlet: present,Remarks: Slight bump in cylinder,Last use: Food,Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No, Bottom Bearing: No,Current Interferer: No

Equipment: Insulation, agitator,Condition: used,Volume: 60,000,Bottoms: Conical bottom,Design: standing,Stand shape: Stand frame,Insulation: available,Diameter inside: 3,700,Diameter outside: 3,880,Total height: 9,200,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Beam stirrer,Bottom bearing: Yes,Current interferer: No,Agitator arrangement: eccentric in the topsoil,Bottom bearing: No,Current interferer: No

Equipment: Heatable/coolable, Insulation,Condition: used,Volume: 160,000,Lower shelf: Cone floor,Design: upright,Stand shape: Standing frame,Heating/cooling (filter bar): available,Max. permissible Operating temperature : 15,Temperature control cylinder: Thermoplate,Insulation: available,Material insulating sheath: Aluminium,Insulation thickness: 50,Diameter inside: 3.900,Cylindrical height: 13.000,Total height: 16.000,Technical documentation: Drawing,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation, crane eyelets,Last use: Food / dairy,Material in contact with the product: V4A

Equipment: Insulation, agitator,Condition: used,Volume: 120,000,Bottom floor: Flat bottom with slope,Design: upright,Standing shape: Standing frame,Insulation: available,Insulating jacket: hermetically welded,Diameter inside: 3,650,Cylindrical height: 11,500,Total height: 12,860,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Insulating cladding and insulation in the area of the stand frame plus 30 cm above it removed (see pictures),last Intended use: Food,Material in contact with the product: V2A 1.4301 (AISI304),Power: 1.0 / 4.4,Speed: 470 /

Equipment: Insulation,Condition: used,Volume: 120,000,Lower floor: flat floor with slope,Design: upright,Standing form: Standing frame,Insulation: available,Material insulating jacket: Painted steel,Insulation thickness: 100,Diameter inside: 3,700,Diameter outside: 3,950,Cylindrical height: 13,000,Total height: 14,000,Manhole / dome: in cylinder,Nameplate: No,Outlet: present,Last use: Food / Dairy,Material in contact with the product: V2A 1.4301 (AISI304), Bottom Bearing: No,Current Interferer: No,Bottom Bearing: No,Current Interferer: No

Equipment: Insulation, agitator,Manufacturer: Ritter Behälterbau Hildesheim,Condition: used,Volume: 130,000,Bottom floor: flat bottom with slope,Top floor: conical bottom,Design: upright,Standing shape: Stand frame,Insulation: available,Insulating jacket: hermetically welded,Diameter inside: 3,400,Diameter outside: 3,500,Cylindrical height: 16,500,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, crane eyelets,Remarks: Stand frame made of V2A,last Intended use: Food,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Propeller,Bottom bearing: No,Current interferer:

Condition: factory new,Volume: 150,000,Lower floor: flat floor with slope,Design: upright,Standing shape: Stand frame,Diameter outside: 4,200,Total height: 12,000,Manhole / dome: in cylinder,Type plate: No,Equipment: Crane eyelets,Material in contact with the product: V4A 1.4401/04 (AISI316),Floor bearing: No,Current jammer: No,Floor bearing: No,Current interferer: No

Fermentation tank 525 l pressureless, with cooling jacket and all fittings and thermometer - Speidel - Year of construction 2019 - Project: GÄRTANK -25- GTKASAU

Equipment: Insulation,Condition: used,Volume: 250,000,Design: upright,Standing form: Frame,Insulation: available,Insulating jacket: riveted,Insulation material: PU foam,Material insulating jacket: Aluminium,Insulation thickness: 150,Diameter outside: 4,550,Total height: 22,950,Wall thickness underbody: 15,Wall thickness cylinder: 5,Technical documents: various documents,Type plate: Yes,Discontinued: existing,Last purpose: Brewery,Material in contact with the product: V2A 1.4541 ( AISI321),Ground Bearing: No,Current Interferer: No,Ground Bearing: No,Current Interferer: No

- Year of construction : 2000 - Membrane: 2024 - With 2 large filling doors - With central filling - With large juice tray - With foot extensions H 200 mm - Last ml in operation: 2025 harvest - Machine in very good condition Dimensions: - Length: approx. 4 700 mm - Width : approx. 1 900 mm - Height: approx. 2,000 mm

- Capacity : approx. 5 000 litres - Filling capacity : approx. 3 500 – 4 000 kg - With slow-running special agitator Equipment: - Remaining drain valve NW 65 - Clear drain : NW 40 - Oval manhole - Kosthahn - Dom NW 400 Dimensions: - Diameter: 1 900 mm - Height conical bottom: 800 mm - Sheath height: 1 500 mm - Total height: approx. 2,900 mm

- Capacity : approx. 4 500 litres - Filling capacity : approx. 3 000 -3 500 kg - With slow-running special agitator Equipment: - Remaining drain ball valve NW 65 - Clear drain : NW 40 - Oval manhole . Kosthahn - Stand display - Dom NW 300 - In good condition Dimensions: Diameter: 1700m Height of curved bottom: 200mm Sheath height: 2'000mm Total height: approx. 2,800mm

- In stainless steel - Standing on feet - Material: 1.4301 / AISI 304 - Content: approx. 5,000 litres Equipment: - Square manhole - Residual drain, ball valve NW 40 - Clear drain, ball valve NW 40 - Stand display - Kosthahn - Dom NW 500 - In good condition Dimensions: - Width: 1 400mm - Depth: 1 800 mm - Sheath height: 2 500 mm - Ground clearance: 150 mm - Total height: approx. 2900 mm

659 litre, Stock number: T4040, Litre: 659, Material: Stainless steel AISI 305, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 415 mm, Turbolence plate: Yes, Agitator: Yes, Agitator type: 3-blade propeller, Agitator placement: From the top, Motor: 0.55 kW - 220/380 Volt - 221 rpm, CIP: Yes, Working temperature: 120° C, Working pressure tank: 1 bar, Working pressure double jacket: 4 bar, Inner diameter: Ø 920 mm, Outer diameter: D 1090 mm, Total height: H 2135 mm

3,350 litre, Stock number: T4034, Litre: 3350, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Tank cover: In the top, Ø 460 mm, Agitator: Yes, Agitator type: 2 pcs. 4-blade propeller, D 550 mm, Agitator placement: From the top, Motor: 2.2 kW - 230/400 Volt - 225 rpm, CIP: Yes, Inner diameter: Ø 1400 mm, Total height: H 3500 mm, Other: With ladder

450 litre, Stock number: T4036, Litre: 450, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs , Top: Conical, Bottom: Conical, Tank cover: In the top, oval 420 x 310 mm, CIP: Yes, Inner diameter: Ø 800 mm, Total height: H 1450 mm

F20 JBA WATER STORAGE TANK Capacity: 5000L Material: Fiber Height: ~ 2.2 meter (Approx. 7 feet) Dealing Terms: Buyer to Arrange Transport: Due to its massive 5,000L size, the buyer will need to arrange a suitable lorry and manpower for dismantling (if necessary) and self-collection/loading. Location: F20 TGSB, Meru, Klang.

1.Industrial filter housing tank Material S/S304 Capacity (bag) 7 dia x 32'' L Total Higher of Machine:905 mm Inlet pipe position for service Side of tank Conection In/Out 2'' Flange Max.operating pressure (bar) 10 Max. operating tempature (๐C) 100 Flowrate :45 m3/hr Vent 1/4'' Clean Drain 2'' Shell O - Ring EPDM Pressure gauge 2.5", 1 unit 2. Filter bag Nylon NY-250 Micron/ Collar:SS ring Size 7" x 32" (2 units/tank) For latex online filtration project SF13 Location: F8A Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

Stainless steel tank, capacity 1200 litres Manufacturer: REIMELT Beam agitator, power 2.2 kW Head single-walled, hinged lid Outer diameter: 1,260 mm cyl. Height 1,000 mm Total height without agitator 1,750 mm Total height with agitator 2,300 mm

10,500 litre RIEGER mash tank with cooling coils Features: Volume 10500 L Material No. V2A Total height 3400 mm Overall length 4350 mm Cylinder length 2300 mm Diameter 2200 mm permissible. Operating overpressure 2 bar Operating temperature 30 °C Description: Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 feet Special features:  ...

8,000 litre, Stock number: T4015, Litre: 8000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 4 pcs., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top and in the side, Ø 450 mm, Inner diameter: Ø 1500 mm, Total height: H 5300 mm

12,500 litre RIEGER mash tank with cooling coils Volume 12500 L Material No. V2A Total height 3700 mm Total length 3500 mm Cylinder length 2400 mm Diameter 2250 mm permissible. Operating overpressure 2 bar permissible. Operating temperature 30 bar Description Material: Material: V2A - AISI 304 Surface: outside and inside 2B =IIIC Marbled front Top: - Threaded nozzle DN 50 – position center - 2 crane eyes - Manhole 410 mm round Tank cylinder: - With paddle with scraper, with cooling integrated in the paddle - with manhole 420 x 320 on the side - With tasting tap DN 20 - With dipping shaft sleeve with sensor - with airlock DN 50 - with large outlet slide with gear rod with outlet chute with ball valve DN 80 - With clear drain ball valve DN 65 Underbody: - with 4 feet Special features:  ...

750 litre, Stock number: T4038, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Melt tank, Standing: 3 pcs. legs , Top: With hinged lid, Bottom: Conical, Double jacket: Yes, Insulated: Yes , Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: 3-blade propeller, Agitator placement: From the top, Motor: 0.75 kW - 220/380 Volt - 104 rpm, Working temperature: 98° C, Working pressure double jacket: Steam 4 bar, Inner diameter: Ø 1300 mm, Outer diameter: D 1510 mm, Total height: H 1800 mm, Other: Melt grid in top for ice blocks

Diaphragm Tank Press Features Length 7300 mm Width 2400 mm Total height 3000 mm Power / Energy / Capacity 15 Tons Description Dimensions press: approx. LxWxH: 7300x2400x3000 mm Dimensions auger: approx. LxWxH: 4050x1500x 730 mm

15,000 litre DEFRANCESCHI MO 150 tank press Features: Volume 15000 L Length 6500 mm Width 2200 mm Total height 3000 mm Operating overpressure 2 bar Weight 4400 kg Horizontal design

Mixing tanks Manufacturer: Becomix Type M 15 Technical specifications Mixing tank, very good mint condition (was only used for the test run) Total boiler capacity 26 l Net capacity 15 l Mobile table version Product Area Material 1.4404 Boiler room material 1.4541 Usable space: Operating temperature 99 °C Boiler room: Operating temperature 144 °C Pressure 4 bar Can be heated with steam or water Coolable with water Turbo dissolver agitator power 0.75 kW, nominal speed 1,390 rpm, mechanical seal Operating manual available

50 litre stainless steel container Manufacturer: Waldner Content: 50 litres Technical specifications : cylindrical standing single-walled stainless steel tank Material 1.4301 Operating temperature 40 °C Propeller agitator kW 0.37, 1,405 rpm the interior of the container is plastic-coated Spout at the bottom center Documents: Nameplate

2 horizontal stainless steel pressure tanks, each equipped with cooling coil and sight glasses. The tanks come with a frame for installation., Additional title: horizontal, coolable stainless steel pressure tanks, Volume vessel: 1200 l, Volume cooling coil: 4 l, Max. overpressure: 3 bar, Max. working temperature: 30 °C, Length: 2700 mm, Width: 900 mm, Height: 900 mm, Material: stainless steel 1.4301 (AISI 304), Position: horizontal, Base construction: each on saddle frame, Features: cooling coil, sight glasses

Horizontal stainless steel pressure tanks with cooling jackets, sight glasses, outlet pipes and pressure gauges., Additional title: horizontal, coolable stainless steel pressure tanks, Volume: 1050 l, Max. working overpressure: 3 bar, Length: 2300 mm, Width: 860 mm, Height: 860 mm, Material: stainless steel, Position: horizontal, Features: cooling jacket, outlet pipe DN50, sight glasses, pressure gauge

Two vertical stainless steel pressure tanks with insulation and sheet metal cladding., Additional title: Vertical, insulated pressure tanks from stainless steel, Volume: 18000 l, Allowed pressure: 4 bar, Allowed temperature: 25 °C, Test pressure: 4 bar, Weight: 2220 kg, Material: stainless steel, Base construction: with vertical tank with dished bottoms and pipe feet, insulation and sheet metal cladding, Features: shell-manhole, nozzle for sampling

Vertical cylindrical-conical tank with insulation and aluminium trapezoidal sheet metal cladding., Additional title: vertical insulated tank, Total content: 13600 l, Position: standing on 4 feet, Base construction: cylindrical tank with conical bottom, Features: Insulation

6 vertical stainless steel tanks with jacket cooling and various fittings., Additional title: vertical, coolable stainless steel tanks, Content: 2200 l, Max. pressure: 0,99 bar, Length: 1000 mm, Width: 1000 mm, Height: 1965 mm, Operation / Control: manual, Material: stainless steel 1.4301 (AISI 304), Position: free-standing, Base construction: cylindrical tank with curved bottoms and square tube feet on domes, Features: sprayball, bunging apparatus, pressure gauge, 1 shell cooling zone, standhose for content display, manhole, thermometer and sampler in the shell, manual valve for cooling control, central bottom outlet

2 horizontal stainless steel pressure tanks, each equipped with outlet pipe, pressure gauge and sight glasses. The tanks come with a saddle frame for installation., Additional title: horizontal stainless steel tanks mounted on scaffolding, Volume: 1050 l, Max. overpressure: 3 bar, Length: 2200 mm, Width: 800 mm, Height: 800 mm, Material: stainless steel, Position: horizontal, Base construction: with scaffolding for installing the tanks one above the other, Features: outlet pipe DN65, pressure gauge, sight glasses

Insulated cream ripener tank made of stainless steel. With agitator and heating/cooling surfaces Capacity: 125 hl, Additional title: Heatable stainless steel tank with agitator, Content: 12500 l, Width: 2,9 m, Height: 4,2 m, Material: stainless steel, Position: free standing, Base construction: Cylindrical tank on tubular feet, Features: Insulation with welded stainless steel panelling, manhole and anchor agitator on top, sampler

5 vertical stainless steel tanks with jacket cooling and various fittings., Additional title: vertical, coolable stainless steel tanks; year of manufacture 1999-2001, Content: 4400 l, Max. pressure: 0,99 bar, Length: 1600 mm, Width: 1600 mm, Height: 2920 mm, Operation / Control: manual, Material: stainless steel 1.4301, Position: free-standing, Base construction: cylindrical tank with curved bottoms and square tube feet on domes, Features: sprayball, bunging apparatus, pressure gauge, 1 shell cooling zone, standhose for content display, manhole, thermometer and sampler in the shell, manual valve for cooling control, central bottom outlet

Vertical sedimentation tank made of stainless steel. Capacity: 80 hl, Additional title: Vertical stainless steel tank, Content: 8000 l, Width: 2100 mm, Height: 6000 mm, Material: Stainless steel, Position: free standing, Base construction: Cylindrical tank with dished bases, on square tube feet, Features: Manhole in the frame, central bottom outlet