pressure air used for sale

Used Air Cooled Condensor Güntner AGVH 080.3A/2x4N(D).E, build in 2007. This used Condensor has 8 fans: - kW / - RPM / Ø = 800 / 153600 m³/h Specifications: Our internal inventory No. 7428 Brand Güntner Type AGVH 080.3A/2x4N(D).E Product type Air Cooled Condensor kW 677 (nh3) Number of Fans 8 Air Flow in m³/h 153600 Surface (m2) 2003 Sizes 8100x2300x1800 mm (LxWxH) Remarks | y.o.b. 2007 // Fan: - kW / - RPM / Ø = 800 Amount in stock 2

Electromechanical actuator for valves, valve drive, actuator, servo motor, air damper actuator, air damper actuator motor Manufacturer: Siemens, air damper actuator -Type: SQN70.464A23 -Quantity: 2 pieces available - Price: per piece -Cardboard dimensions: 150/100/70 mm -Weight: 0.4 kg/piece

Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.

Holtrop Jansma clean air extraction with swivel lock, flame suppression device & fabric protection damper Brand: Holtrop Jansma clean air extraction Type: MSO 350/300s Year of construction: 2015 M-Nr.: Woo560825S , 5960MS Clean air extraction: MSO 350/300 with star wheel swivel lock Intake supports: ø300-350 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 740 kg Capacity: 7,900 m3 /hour Pressure: 1,965 Pa Power supply: 7.5 kW, 380V, 9 Amp Filter surface: 40 m2 Filter tubes: 45 pcs. Length filter tubes: 1,450 mm Diameter filter tubes: 200 mm Cleaning: included Noise: 77 dB(A) Fire protection: sprinkler installation with fire brigade connection Flame protection flap: 70°C melt cartridge Condition: Fully functional tested Optional: Automatic fire extinguishing: € 1.750 Return air - with summer-winter slider: € 350

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Air conditioner, air conditioning -Transfer: in the current condition as seen -Housing back wall: slightly deformed at the top -Stulz: MINISpace EC room cooling CCD 61 A -Power: approx. 6.8 kW -Dimensions: 600/670/H2250 mm -Weight: 172 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper -Ventilation duct inlet with: filter -Outlet: Ø 390 mm -Dimensions: 1340/1100/H600 mm -Weight: 114 kg

Refrigerated compressed air dryer from 2004, complete (closed model) 1 available 1100 m3/h, 12 bar Manufacturer: Arctic Star Zander Model No.: AS1100 Type: Refrigerated compressed air dryer Serial Number: 2794660001 Volumetric flow rate [m3/h]: 1,800 Pressure inlet [bar]: 12 Power connection [KW]: 3 Year of construction: 2004 Weight [kg]: 208 Dimensions LxWxH [cm]: 92x97x112

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg

Compressed air breathing apparatus, respiratory protection -2 bottle device -Overpressure with: pressure reducer -High pressure manometer -Demand valve with: integrated warning device -Thread connection: M 45 x 3

Hugo Beck SL 412/25 Shrink Tunnel Hugo Beck Shrink tunnel SL 412/25 380 V 6/9 KW power Air circulating blower Cooling fans 2 x control heater 1 x basic heating 1 x auxiliary heater with chain transport Metrics Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm More items - new and used - can be found in our shop! International shipping costs on request!

T9STELA AIR HEATER indirect 2000 KW, SLI 2000; Weishauptbrenner L9T OIL Tel. 01715213204

• Nominal temperature 300 °C • Interior volume 52 l • Interior dimensions (W x D x H) 403 x 339 x 380 mm • 2 chrome-plated slide-in grates • Digital temperature control • Temperature selector limiter • Speed control circulating air fan • Fresh air filter, volume flow 10 m3/h • Without air flap adjustment • Temperature protection class 2 • Last check 11/2021 • Drive 220V/50Hz/1,5kW • Without under-table

Water flow rate 30-150l/h Flow meter with manual control valve Solenoid valve for water and compressed air. Pressure regulators for water and air Special nozzle for injecting water and air Mounted on a plate

Rotary drive for air flaps, rotary air flap drive -Manufacturer: Siemens -Type: GBB161.1E -unused from: warehouse liquidation -Number: 3x available -Price: per piece -Dimensions: 340/105/H105 mm -Weight: 2 kg

Immediately available completely overhauled shop air coolers, we also have used ones in stock.

Evaporator Küba SGB 073C, YOC 2006 Capacity 16.3 liters Three fans sucking 630 watts Velvet Injected Valve Built-in Suitable for TK or plus cooling In very good condition

Compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Drying capacity 1200 L / min -Max. Pressure: 13 bar -Operating voltage: 240 V -Dimensions: 485/350 / H450 mm -Weight: 23.5 kg

Immediately available used starting air distributors

Immediately available used starting air distributors

Immediately available used air coolers

Immediately available completely overhauled in-store air coolers, we also have used ones in stock

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Air filter housing -for: filter donaldson XLP 18 2046 -Inlet/outlet: Ø 150/149 mm -Price: per piece -Number: 1 piece -Dimension: Ø 355/595 mm -Weight: 12.35 kg

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Air filter housing -Inlet/Outlet: Ø 60/61 mm -Dimensions: Ø 166/450 mm -Bracket dimensions: see photo -Weight: 4.45 kg

Immediately available Completely overhauled in-store air coolers

Immediately available used shop air duct for SBA 6/8/12/16 M816

Kaeser SK26 Air compressor Serial: 2610494 Air compressor, 15Kw, 7.5Bar, rate motor speed 3000/min, 3Ph

Kaeser SK26 Air compressor Serial: 264957 Air compressor, 15Kw, 7.5Bar, 2.4M3/min, 3Ph

Air spring bellows, roller bellows, air cushion, air filter housing -Knecht combination air filter -Inlet/Outlet: Ø 57/60 mm -Type: LVPO 045 S/9 -Price: per piece -Quantity: 1 piece -Dimensions: Ø 165/365 mm -Weight: 3.2 kg

Air bellows, roller bellows, air cushions -Goodyear Air: Spring -Part Number: 1R11-703 -Item no.: 56622270360000 -Dimensions: Ø 258/263 mm -Weight: 12.15 kg

4690 KW Tubetech Air Cooled Condenser ZBW-R-1F-4/1 Condenser from 2018, condenses up to 8 t/h steam, like new, was used as a steam condenser of a 1,500 KW turbine. complete (closed unit with control), 1 available, 4,690 kW, 1 fan. Manufacturer: Tubetech Model No.: ZBW-R-1F-4/1- 6550×2738-DCC63B8-4-1 Serial Number: 1381-1384 Type: Air Cooled Condenser/Steam Condenser Fans: 1 Power [kW]: 4,690 Year of construction: 2018

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Kaeser SK26 Air compressor Serial: 2610493 Air compressor, 15Kw, 7.5Bar, rated motor speed 3000min, 3Ph

Ingersoll Rand D480IN-A Refrigerated air dryer 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Ingersoll Rand D480IN-A Refrigerated air dryer 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph

Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Fluidair RPK47 Air compressor Serial: 41449 Rotary air compressor, working pressure 100PSI, Discharge pressure 8Bar, with fluidair rotastar control, 3Ph

Air conditioner, air conditioning unit, condensate pump for air conditioner -Air conditioning - Manufacturer: Siccon - Type: Flowatch Design -Dimensions: 935/135/H75 mm -Weight: 1.3 kg

Air conditioner, air conditioning, condensate pump for air conditioning, defrost water pump -Air conditioners -Manufacturer: Eckerle -Type: EE2000 -Number: 1x pumps available -Price per piece -Dimensions: 150/190/H80 mm -Weight: 0.5kg

Rotary actuator for air dampers, air damper rotary actuator -Manufacturer: Siemens -Type: GDB331.1E -Number: 24x rotary drives available -Price: per piece -Dimensions: 140/70/H60 mm -Weight: 0.8 kg

Pre- and post-heating coil, air heating element, DN125, 371550, LHE 125 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Dimplex - 371550 - LHE 125 IS Air heating element Electric pre- and post-heating. 0.75 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +30°C, air flow monitor for detecting the smallest air flows at minimum operation and two safety temp ...

air conditioner, air conditioning unit -Power: 6.5 kW -Type: AOY24FNBK -Dimensions: 900/365/H645 mm -Weight: 80 kg

Pre- and post-heating coil, air heating element, DN160, 366260, LHE 160 IS, Dimplex, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Unfortunately the type plate has come off - special price Dimplex - 366260 - LHE 160 IS Air heating element Electric pre- and post-heating. 1.5 kW electric heating coil (power-controlled) for pre-heating the outside air or post-heating the supply air, thermally insulated, with temperature switch adjustable from -30°C to +60°C, air flow monitor for detecting the sma ...

Specifications: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm - Weight approx. 280 kg

Key data: 3000 KW, 400 V

Thermofin TDD.2-091 V-cooler, dry-cooler, dry cooler, glycol cooler., as good as new only one year in operation, super quiet, high efficient, 22fans, 13.7 x 2.4x 2.7 h, 7150kg, from 500KW to 3500KW,