pressing used for sale

Pressing force 160kN,pull cushion force 63kN,stoesselstroke 300 mm, pull-cushion stroke 150 mm, recessed height 500 mm, table 630x400,Stoessel 300x250,pull cushion flap 350x270,

CrimpOne C1-25sE Servo electric hose press with spindle drive Technical data Main technology: AC-servo ball screw Maximum pressing force: 250kN Crimping range: 10-54 mm Max tube size: 1¼ inch Master matrix D / l: 84 / 78 mm Servo motor: 5 kW Repeat accuracy: 0.01 mm Maximum opening: + 100 mm Maximum feed channel: 45 mm Maximum speed: 80 mm / s Maximum opening speed: 80 mm / s Max Crimpgeschwindigkeit: 10 mm / s Length: 1250 mm Width: 850 mm Height: 2100 mm Weight: 700 kg Control: TC12 - Omron touchscreen

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 34925 Technical data Pressure: 60 to Stroke: (stepless) from: 70 s/min up to: 800 s/min Execution: 4 supports Table surface: Length: 770 mm Width: 620 mm Thickness: 120 mm Table relieving: Length: 580 mm Width: 100 mm With pressing power: downside up Slide adjustment: 80 mm Stroke adjustment: from: 20 mm up to: 76 mm Slide clamping surface: Length: 700 mm Width: 456 mm Passage between the supports: longitudinal: 650 mm Lateral: 260 mm Air connect: 6 - 10 bar Voltage 50 Hz 3x: 400 Volt Total power required: 41 kVA Machine´s weight about: 7600 kg Overall dimensions machine: Length: 2600 mm Width: 2100 mm Height: 2200 mm Various accessories: Belt feeding: SOPREM Workpiece conveyor Sound insulation cabin Chip conveyor

Rotative tablet press of 27 stations Max. diameter of the tablet 16 mm Filling depth 18 mm Pressing capacity 80 Kn Prepressing capacity 20 Kn Production from 48.000 to 100.000 h Dimensions : 1.000 x 950 x 1876 . Weigh 1850 Kg. Force feeder Type of tool : B

The press is suitable for pressing meat in rectangular shapes Dimensions: 300 x 100 x 230 cm Compressed air approx. 8 bar

Complete Printshop package: HP DesignJet T7100PS (42 ", 1067 mm) 3 roll feed plotter Printing capacity 9,490 m² see usage report HP DesignJet T7200 (42 ", 1067 mm) 3 roll-fed plotter Printing capacity 74,460 m² see usage report HP DesignJet Z6800 (60 ", 1520 mm) overhauled plotter Printing capacity 1,195 m² see usage report HP PageWide E77660 (50/70 ppm) with finisher (Punsh, Staples) Printer Printing capacity 258,424 (total) see consumption page HP LaserJet 4050 TN (3 trays paper feed) Printer DYMO LabelWriter 310 Printer Konica C754 (1 underfeed bin) Printer including toner (x8) € 25.00 each EFI Model: Color Profiler Spectrometer ES-1000 Spectrometer HP Sanner 4520 (42") scanner Avision AV 220 C2 A4 scanner Avision FB 2080E Scanner A3 Rowe 721-1 (folding width 96 cm) including cross folding Folding machine P ...

Transport and pressure unit for oval pipes 3000 mm long at 80-1100 mm diameter (without lifting and traversing unit) - The device has a hydraulic supply built into the head (visible also in the picture). - Electrical supply with attached control box direct connection to 380 V. - Hand-held buttons for the pressing functions. W8bik - The unit was constructed according to CAD drawing set with principle drawing. - Required lifting unit max. 1 to. Chain hoist.

DOMA-T Cheese Divider KT 2 BOX Knife for 20 parts Machine for loaves with a diameter of up to 40cm Loaves are pushed upwards through the knife and pieces can then be easily taken away from the machine surface Two-hand operation, change direction by letting go and pressing both buttons again Machine must be thoroughly cleaned before use Table-table with approx. 60x70x45H Messer has been reworked before, but does not affect the function. Video about test run and other pictures available

used baler Manufacturer: PAAL Type: LIKON 80 60 Year of construction: 2001 Operating hours: 37,056 h (on 12.10.2021) Specifications: Length: approx. 9405 mm Width: approx. 4050 mm Height: approx. 2500 mm Press weight up to: approx. 13 tons Pressing force at 300 bar: 60 t Filling opening: approx. 160 x 92 cm Channel cross-section: 100 x 80 cm Operating voltage: 400 V/3/N/PE/50 Hz Machine complete for continuous operation, including: Press box, complete with: - master press cylinders, - press hoppers, - closed sewer side walls, - 8 x 40 kg wire unwinding devices, - automatic channel adjustment, - bale length meters, - Synthetic resin coat in light blue according to RAL 5012 Hydraulic power pack, complete with: - low-maintenance and low-pipeline hydraulics, - a high-pressure internal gear pump 520 Ltr./h flow rate, drive 75 kW, -  ...

The press is for the re-pressing of bacon. This gives it a smooth surface Compressed air connection 8 bar

Max. pressing force 60 to Installation height 500 mm Stroke of the press ram 300 mm Passage between the columns 430 mm Pusher bore 40D H7 Clamping table 430 x 310 mm

Technical data Pressure: 32 to Stroke: (stepless) from: 80 s/min up to: 400 s/min Execution: 4 supports Table surface: Length: 420 mm Width: 380 mm Tool height: 300 mm With pressing power: upside down Slide adjustment: 50 mm Stroke adjustment: from: 6 mm up to: 50 mm slide bore diameter: 32 mm Slide clamping surface: Length: 420 mm Width: 380 mm Passage between the supports: longitudinal: 420 mm Lateral: 250 mm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3000 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 2700 mm Various accessories: Automatic feed: number: 1 Execution: collets Draw-in left Electro-pneumatic clutch Upper extractor Stock reels with electric motor

Key data: 200 Delem, 4100 DA 70

Capacity: 200 t Folding length: 4100 mm CNC Brand: Delem CNC Model: DA 70 Max. bending length:        4.100mm Distance between column:    3.600mm Max. pressing force:        200T Dis. Beam – Table:          435mm Beam stroke:                200mm Table Width:                225mm Troth beam:                 4.090mm Approch speed:              100mm/min. Working speed:              10mm/min. Return speed:               90mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  4 Power:                  & ...

Key data: 125 Cybelec, 2550 DNC 90 3D

Capacity: 125 t Folding length: 2550 mm CNC Brand: Cybelec CNC Model: DNC 90 3D Large tooling package Original paint 1e owner 2 hand opperator DNC 90 COLOR 3D Control Max. bending length:        2.550mm Distance between column:    2.050mm Max. pressing force:        125T Dis. Beam – Table:          480mm Beam stroke:                215mm Approch speed:              130mm/min. Working speed:              7mm/min. Return speed:               160mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  Y1 / Y2 / X  Control:                    Yes  Crowning:     ...

Waste Baler BTS-MF100 The BTS-MF100 Waste Baler is ideal for compacting loose cardboard, paper and film. By compacting these recyclable materials user receives a high volume reduction up to 90% and also waste disposal cost savings. The baler impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Solid bales with bale weight up to 100 kg - Suitable for baling of cardboard, film, clothes and many materials more - Powerful cylinder for optimal material compaction - Retaining Claws to reduce material spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 6 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2371 x 1388 x 1046 mm Transportation ...

Key data: 240 Safan, 4100 E-Control CNC

Capacity: 240 t Folding length: 4100 mm CNC Brand: Safan CNC Model: E-Control CNC Max. bending length:        4.100mm Distance between column:    3.600mm Max. pressing force:        240T Dis. Beam – Table:          725mm Beam stroke:                335mm Troth beam:                 400mm Approch speed:              140mm/min. Working speed:              8mm/min. Return speed:               100mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  6 = Y1/Y2/V/Z1/Z2/Delta  Control:                    E-Control Touchscreen  Crow ...

Waste Baler BTS-MF500LH The BTS-MF300LH and BTS-MF500LH Low Height Waste Balers are ideal for compacting loose cardboard, paper, film, plastic and metal containers and many materials more. The waste balers impressing with their low height, ease of use and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 500 kg - Compact and low design with only 2249 mm height - Suitable for baling of cardboard, film, clothes, cans, PET, Canister, Big Bags and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force:50 Ton Motor: 11 kW 32 Amp Power suppl: 380-400 V (3 Phase) Machine size (H x W x D): 2249 x 2041 x 1350 mm Tr ...

Key data: 66 _Unknown / Other, 2080

Capacity: 66 t Folding length: 2080 mm CNC Brand: _Unknown / Other Max. bending length:        2.080mm Distance between column:    1.750mm Max. pressing force:        66T Dis. Beam – Table:          347mm Beam stroke:                200mm Table Width:                120mm Troth beam:                 400mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               130mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis:  5 Control:                    Del ...

BTS-MF40 Cans_PET Special Waste Baler The BTS-MF40 Cans_PET Special Waste Baler with perforator is ideal for compacting difficult and hard materials such as beverage cans and PET bottles. The perforator compaction head pierces empty but also full bottles and cans so air and liquid can escape and in the same process material will be compacted. The Special Waste Baler impresses with its easy operation throughput and large filling volume. - Solid bales with bale weight up to 40 kg - Suitable for empty and full cans and PET bottles - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Perforator compaction head for piercing closed cans or PET bottles so air and liquids can escape - Roller guided head for ease of movement - CE-certified - Quality product Made in Europe Pressing force: 8 Ton Motor: 2.2 kW 16 Amp Power suppl ...

Key data: 85 _Unknown / Other, 2550

Capacity: 85 t Folding length: 2550 mm CNC Brand: _Unknown / Other Max. bending length:        2.550mm Distance between column:    2.260mm Max. pressing force:        85T Dis. Beam – Table:          385mm Beam stroke:                215mm Table Width:                120mm Troth beam:                 410mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               135mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  6 Control:                    De ...

Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may vary

Key data: 130 Delem, 3060

Capacity: 130 t Folding length: 3060 mm CNC Brand: Delem Max. bending length:        3.060mm Distance between column:    2.690mm Max. pressing force:        130T Dis. Beam – Table:          385mm Beam stroke:                215mm Table Width:                120mm Troth beam:                 410mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               135mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  7 Control:                    Delem  ...

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE

CNC - controlled press brake with 700 mm installation height + 400 mm press bar stroke - a press brake of excellent quality - used machine built in 2006 - very good condition, pressing force 3,500 kN, largest bending length 4,200 mm, passage between the side stands 3,550 mm, extension in the side stands 500 mm, maximum installation height 700 mm, press beam stroke up to 400 mm, press beam rapid speed 200/180 mm/second, drive power 15 kW, dimensions approx. 5 m x 2.3 m x H 3.45 m, weight 25,000 kg. Equipment: 8 CNC axes Y1/Y2 (press bars up and down) - X1 + X2 (the stop blocks back and forward 750 mm) - R1 + R2 (back stop blocks up and down to 200 mm) - Z1 + Z2 (stop blocks width adjustment 3,500 mm), DELEM® CNC - control with color graphics and 15" screen, Laser beam bending line monitoring, CNC – controlled hydraulic dynamic bombardment, compensation of stand suspension, WILA® hy ...

Rotary tablet press SPT- TP500D with double-sided press; Brvyulnw 2 layered production; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 500D Number of stations (Max.) D=41 B=49 BB=59 1 Max tablet ejection (two-sided) T/h 270 000 360 000 420 000 Max tablet ejection 2 layer T/h 90 000 115 000 140 000 2 Max.Tab.Diameter Round mm 13 16 25 Form 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 6 Dimensions mm 1150 x 1550 x 1950

Capacity: 220 t Folding length: 4000 mm CNC Brand: _Unknown / Other CNC Model: MNC 95 Max. bending length:        4.000mm Distance between column:    3.150mm Max. pressing force:        220T Dis. Beam – Table:          500mm Beam stroke:                250mm Table Width:                180mm Troth beam:                 350mm Approch speed:              100mm Working speed:              9mm Return speed:               90mm Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  4 Control:                    ...

Capacity: 100 t Folding length: 3100 mm CNC Brand: Amada CNC Model: Operateur Max. bending length:        3.100mm Distance between column:    2.700mm Max. pressing force:        100T Dis. Beam – Table:          450mm Beam stroke:                180mm Approch speed:              8mm Working speed:              100mm Return speed:               80mm Adjustment X-Axis back gauge:750mm Number of controlled axis:  4 Control:                    Opperateur  Length:                     3.700 mm  Width:            ...

Capacity: 120 t Folding length: 3100 mm CNC Brand: Delem TRUMPF - TruBend 3120 CNC Pressbrake 3100 x 120 Ton Y1/Y2/X/R Axis MACH - ID 6370 Make: TRUMPF Type: TruBend 3120 Control: Delem YOP: 2010 Hours: 9000 Max. bending length    3.100 mm Distance between column     2.550 mm Max. pressing force    120 T Dis. Beam – Table       470 mm Beam stroke         340 mm Approch speed     200 mm Working speed      180 mm Return speed         180 mm Number of controlled axis        4 Power       11 kW Length      3.600 mm Width       1.750 mm Height      2.330 mm Weight     8.300 kg

Rotation tablet press SPT-TP 400 with high production capacity; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 400 Number of stations (Max.) D=30 B=36 BB=45 1 Max tablet ejection/hour T/h 125000 170 000 215 000 2 Max.Tab.Diameter Round mm 13 16 25 Mould mm 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 5 Max pre-press force t 2 Hqgonxsno 6 Dimensions mm 1000 x 1230 x 2000

Capacity: 100 t Folding length: 3100 mm CNC Brand: Safan CNC Model: EC 20 Touch Screen SAFAN DARLEY - E Brake 100 - 3100 CNC Servo Mechanical Pressbrake 3100 x 100 T MACH - ID 6347 Make: SAFAN DARLEY Type: E Brake 100 - 3100 Control: EC 20 TOUCH SCREEN YOP: 2017 Max. bending length    3.100 mm Distance between column     3.100 mm Max. pressing force    100 T Dis. Beam – Table       590 mm Beam stroke         300 mm Adjustment X-Axis back gauge     1.000 mm Number of controlled axis          X-Y1-Y2-Z1-Z2 Control        EC10 - 2D Power          11 kW Dimensions Length         4.000 mm Width           2.300 mm Heigh ...

The small rotary tablet press SPT-TPL 200 (small scale production); Touch screen, PLC control platform; HMI system; Bczkcapdbh The machines comply with the requirements of the GMP guidelines and are CE certified; Number of stations (Max.) D=13 B=16 BB=19 1 Max tablet ejection/hour T/h 46 000 57 000 68 000 2 Max.Tab.Diameter Round mm 25 16 13 Shape mm 25 19 14 3 Max tablet thickness mm 8.5 4 Max main pressing force t 5 5 Max pre-press force t 1 6 Dimensions mm 600 x 1106 x 1705

Capacity: 220 t Folding length: 4200 mm CNC Brand: _Unknown / Other CNC Model: Operator AMADA - HFBO 220-4 CNC Pressbrake 4200 x 220 Ton MACH - ID 6330 Make: AMADA Type: HFBO 220-4 Control: Operateur YOP: 1994 Max. bending length    4.200 mm Distance between column     3.760 mm Max. pressing force     220 T Dis. Beam – Table       450 mm Beam stroke        180 mm Troth beam          410 mm Approch speed       100 mm Working speed        7,5 mm Return speed           75 mm Adjustment X-Axis back gauge       1.000 mm Number of controlled axis       4 Control      Operateur 8 Axis Crowning&nb ...

Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is bet ...

Capacity: 35 t Folding length: 1200 mm CNC Brand: Delem TRUMPF - TrumaBend E35 Servo Mechanical Pressbrake 1250 x 35 Ton MACH - ID 6327 Make: TRUMPF Type: TrumaBend E35 Control: Delem YOP: 2000 Max. bending length    1.200 mm Distance between column    900 mm Max. pressing force      35 T Beam stroke      100 mm Adjustment X-Axis back gauge     500 mm Number of controlled axis      3 Control      DELEM Power        2 x 7.5 kW Dimensions Length       1.500 mm Width         1.500 mm Height        2.100 mm Weight       3.100 kg

Capacity: 200 t Folding length: 4100 mm (1) Down stroke / (2) Up stroke: 1   CNC Brand: Safan CNC Model: ARA Touchscreen MACH-id    6042 MAKE        Safan Darley Holland TYPE          E-BRAKE 200 - 4100 YOP            2010 SPECIFICATIONS Max. bending length    4100 mm Distance between column        4100 mm Max. pressing force          200 T Dis. Beam - Table         690 mm Beam stroke                  300 mm Approch speed         200 mm/min. Working speed         10 mm/min. Return feed               100 mm/min. Adjustment X-Axis back gauge        ...

automatic baling press Manufacturer: WELGER Type: SB 2000L Machine number: 1307 51 321 technical data: Pressing force: 7 t Drive power: 11 kW Bale size 500 x 400 x length in mm Machine weight: approx. 1.9 t

spare parts - cook bolinders - Hydraulic cylinder PRESSING Hydraulic cylinder pressEN

Capacity: 110 t Folding length: 4100 mm CNC Brand: _Unknown / Other MACH-id     6041 MAKE         Deratech TYPE           ULTIMA 130 - 4100 YOP             2015 SPECIFICATIONS Max. bending length          4100 mm Distance between column          3600 mm Max. pressing force         110 T Dis. Beam - Table         440 mm Beam stroke          250 mm Troth beam            400 mm Approch speed         200 mm/min. Working speed          10 mm/min. Return feed               165 mm/min. Adjustment X-Axis back  gauge&n ...

Capacity: 80 t Folding length: 2550 mm CNC Brand: Safan CNC Model: TS1 MACH-id     5585 MAKE         Safan Darley Holland TYPE           SMK - K 80 - 2550 TS1 YOP             2003 SPECIFICATIONS Max. bending length        2550 mm Distance between column           2550 mm Max. pressing force           80 T Beam stroke         115 mm Approch speed          115 mm/min. Working speed        90 mm/min. Return feed             100 mm/min. Adjustment  X-Axis bac gauge        700 mm Number of controlled axis          X, R, Z1, Z2 Co ...

Capacity: 320 t Folding length: 4100 mm CNC Brand: _Unknown / Other CNC Model: Robosoft ATS 900 MACH-id     5560 MAKE         HACO belgium TYPE           ERM 40320 YOP             2005 SPECIFICATIONS Max. bending length         4100 mm Distance between column        3150 mm Max. pressing force           320 T Dis. Beam - Table         500 mm Beam stroke                  250 mm Troth beam                     330 mm Approch speed               80 mm/min. Working speed                8 m ...

N° 0214: 1 gebr. Hydraulic quick-stroke two-stand press Fabr. SMG, Type DS 63, Bauj. 1984 with pressing force 630 kN, retraction force 51 kN Arb.-Ber.: Table area 660 x 460 mm, drive power: 15 kW Accessories: The press was upgraded to UVV 11.064 VBG 7n5.2 in 1991. Other: Light width between the stands 680 mm, max. distance between table top and pestle 385 mm, ejector force 15 kN largest pestle stroke 150 mm.

Capacity: 80 t Folding length: 2550 mm CNC Brand: Delem CNC Model: DA 23 MACH-id     5558 MAKE          Darley Holland          TYPE            EHP 80 25/20 YOP              1991 SPECIFICATIONS Max. bending length         2550 mm Distance between column       2050 mm Max. pressing force        80 T Dis. Beam - Table           410 mm Beam stroke                     225 mm Table Width                      160 mm Troth beam                       400 mm Approch speed    ...

Capacity: 200 t Folding length: 3000 mm MACH-id      5485 MAKE           Promecam France TYPE              RG 203 YOP                1980 SPECIFICATIONS Max. bending length          3100 mm Distance between column        2700 mm Max. pressing force          200 T Beam stroke         150 mm Troth beam           300 mm Approch speed      37 mm/min. Working speed      7,5 mm/min. Return feed            60 mm/min. Number of controlled axis       2 DIMENSIONS Length         3115 mm Width        &n ...

Capacity: 50 t Folding length: 2050 mm MACH-id      5319 MAKE          Safan Darley Holland TYPE            UCK 50 - 2050 YOP              1987 SPECIFICATIONS Max. bending length        2050 mm Distance between column       1600 mm Max. pressing force        50 T Dis. Beam - Table        350 mm Beam stroke      115 mm Table Width       100 mm Troth beam         400 mm Approch speed      60 mm/min. Working speed     10 mm/min. Return feed           53 mm/min. Adjustment X-Axis bac gauge        500 mm Number of controlled axis  &nbs ...

Rubbed machine Sumbel Regent 650; good condition; Working width 650mm; Material thickness 0-30mm. Down pressing machine Sumbel Regent 650; good condition; working width 650mm; thikness from 0-30mm.

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg

pressure:650 t passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

specifications: - Load capacity Positioning table approx. 750 kg - Sheet plate diameter 500 mm - max workpiece diameter 1600 mm - Height turntable at horizontal position approx. 750 mm - Turntable with right, + left-hand run - Rotary axis turntable endless 360° - Turning time per revolution 12.5 sec. - Pan left + right - Pivot axis rotation angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot button for turntable + swivel arm - hydr. Clamping bolts for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force pressing / pulling 80 / 48.9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manually or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - sepa ...