pressing used for sale

Plate dimensions: 250 x 120 cm Daylight opening: 400 mm total connected load: 20 kW Electro-hydraulic veneer press with Automatic switching and automatic opening. Pressing area: 250 x 125 cm Pressing pressure: 100 tons Cylinders: 6 pieces max. opening: 40 cm Weight: approx. 3,000 kg - ELKOM combination heating plates with gold anodized coating (Temperature settings can be controlled separately at the top and bottom) - EMERGENCY STOP contact strip under the press table - Cable emergency stop device The machine has been technically tested and is in a ready-to-use condition. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1200 t, 4000 mm, 700 mm

Manufacturer | Manufacturer: ONA - Pres Description | Name: PYZT 1200 Year of construction | Year of manufacture: 1990 Adjustable pressing force | Adjustable pressing force: 1200 - 12000 kN (1200 t) max. lifting height | max. Lifting height: 700 mm Table / Plunger Size | Table / ram size: 1600 x 4000 mm

Description: - hand lift cylinder with different inserts - one hydraulic cylinder pressing force: 10 to - one hydraulic cylinder pressing force: 0.5 to - with extensions Approx. Onsite Dimension. (l x w x h): 660 x 350 x 160 mm, weight approx.: 20 kg

Description: Frame press, CE certified according to the latest guidelines. - with manual hydraulics - Move the cylinder sideways - 2 pcs. Pressing block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs. Pressing bolt, 10 - 30mm, with quick-change adapter, max. 20t - 2 press documents Pressure 10 t Stroke 180 mm Clear width between stands 335 x 115mm Installation height max. 340 mm Cylinder diameter 56mm Piston diameter 40mm Machine weight approx. 0.05 t Space required approx. 0.75 x 0.53 x 1.6 m Approx. Onsite Dimension. (l x w x h): 800 x 550 x 200 mm, weight approx.: 50 kg

Description: Frame press, CE certified according to the latest guidelines. - with manual hydraulics - Move the cylinder sideways - 2 pcs. Pressing block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs. Pressing bolt, 10 - 30mm, with quick-change adapter, max. 20t - 2 press documents Pressure 20 t Stroke 180 mm Clear width between stands 540 x 100 mm Height max. 990 mm Cylinder diameter 72 mm Piston diameter 48 mm Machine weight approx. 0.12 t Space required approx. 0.8 x 0.7 x 1.8 m Approx. Onsite Dimension. (l x w x h): 1,600 x 350 x 200 mm, weight approx.: 120 kg

automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t

Maintenance toolset for an Alfa Laval 518 HGV separator / skimmer. Including pressing tool with adapter., Type of Machine: Toolset , Pressing tool: Yes

Description: Electric connection: 380V/50Hz Pressing force approx.: 63t Max. pressing force: 63 to, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,100 x 2,200 mm, weight approx.: 2,000 kg

Description: maximum panel length: 3000 mm working height : 1000 mm panel thickness 25 - 90 mm number of working units 6 pcs maximum weight allowed / work unit 150 kg number of clamps / working unit 8 pcs clamping mode of the clamps pneumatic number of pneumatic motors 1 pc (Ingersoll 3840 P) top panel pressing mode pneumatic number of vertical pressing pistons 1 piece compressed air pressure 1/2 - 6 bar electric motor 400V, 50 Hz, 1,5 kW rotating mode of working units: electric Approx. Onsite Dimension. (l x w x h): 4,000 x 3,400 x 3,000 mm, weight approx.: 1,500 kg

Description: Top-maintained VENJAKOB Venspray coating systems with steel belt transport, 2 spray systems, IR dryer, airless pumps, smoothing roller, HILMER & KOCH hydraulic press and transport rollers. The system has a working width of approx. 1,600 mm and a Siemens Simatic HMI Touch Panel control. Only samples, tests and product developments were processed on the system. , Pos. 1 VENJAKOB roller conveyor angle transfer, manual removal station Pos. 2 VENJAKOB accumulation roller transport and control station Pos. 3 VENJAKOB IR preheating zone VEN DRY IR top/bottom Pos. 4 VENJAKOB spraying machine VENSPRAY with airless pump station Pos. 5 VENJAKOB IR dry zone VEN DRY IR above Pos. 6 VENJAKOB spraying machine VENSPRAY with airless pump station Pos. 7 VENJAKOB IR drying zone VEN DRY IR at the top and steel strip cleaning station Pos. 8 VENJAKOB angle transfer Pos. 9 VENJAKOB l ...

Description: Loader belt dimensions 1920 X 3200 mm , Integral loader dimensions: 2200 x 4400 x 1000 mm  , Unloading roller conveyor dimensions:  ,1900x 2500 x 1000 mm  , Pressing table dimensions: 1900 x 3500 mm  , Equipped with No. 6 pressing plungers DIAM: 150 mm approx  , Approx. Onsite Dimension. (l x w x h): 9,500 x 3,000 x 2,100 mm, weight approx.: 6,000 kg

Description: • Semi-automatic pneumatic carcase press • Entrance table length 1650 mm with belt width 600 mm • Maximum workpiece dimensions to press approx. 2200 x 600 x 1200 mm • Minimum pressing workpiece length approx. 300 mm • Minimum pressing workpiece height approx. 300 mm • 4 pneumatic horizontal cylinders and 4 vertical ones • Vertical pressure from 0 up to 1900 kg • Horizontal pressure from 0 up to 600 kg • Feed speed from 12 m/min • Adjustable clamping time Approx. Onsite Dimension. (l x w x h): 5,600 x 1,200 x 2,610 mm, weight approx.: 1,800 kg

Description: • Carcase press • Pneumatically driven • 3 x 2 vertical pressing cylinders • 2 x 2 horizontal pressing cylinders • Maximum workpiece dimensions approx. 2600 x 600 x 1400 mm Approx. Onsite Dimension. (l x w x h): 3,500 x 1,050 x 2,350 mm, weight approx.: 800 kg

Description: Bending length: 1250 mm Pressing force: 800 kN ram stroke 160 mm Hydraulic pressure: 255 bar Stop time: 110 ms Safety distance: 176 mm Input device (screen): Cybelec DNC 74 PS b Documentation available Max. pressing force: 82 to, bending length: 1,250 mm, stroke: 160 mm, weight approx.: 7,300 kg, Approx. Onsite Dimension. (l x w x h): 1,820 x 1,950 x 2,900 mm

Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ra ...

Description: Cabinet dimensions: Cabinet length- 300 - 2600 mm Cabinet height- 300 - 1350 mm Carcase width- 220 - 700 mm Pressing force: Horizontal- 1800 kg Vertical- 2300 kg Pressing elements: Vertical 7 pieces 150 x 50 mm Horizontal 6 pieces 150 x 50 mm Connection: 400 V 3 KW Approx. Onsite Dimension. (l x w x h): 3,800 x 1,000 x 2,400 mm, weight approx.: 2,200 kg

Cnc through feed drilling machine Brand: Cosmec Type: Star new mashine 1 x infeed air cushion table of 1500mm 1 x outfeed air cushion table of 1500mm Maximum workable piece in width 950mm Minimum workable piece in width 60mm Maximum workable piece in lenght, infinite Minimum workable piece in lenght 250mm 1 x Moving gripper 1 x Stop for reference in entrance 1 x Laser to detect the pieces lenght 1 x Drilling unit with 10 vertical + 6 horizontal spindles + saw in X 1 x Router of 8hp with ISO30 connection 1 x 13 points semiautomatic lubrification 2 x Vertical clamps with double row of pression each one with a pressing bar + a line of pressing wheels 1 x PC with 21 screen 1 x Cosmec interface Seaworthy packing Optional: 1 x 6 positions tool changer

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t

Pressing force: approx. 8 tons Connection value: 230 V 1.5 kW Filling shaft: 630x460x750 mm Bale size: 630x460x700 mm Bale weight: approx. 30 - 80 kg Machine size 830x970x1870 mm WxDxH Machine weight: 360 kg Warranty: 12 months Condition: technically and optically revised Completely overhauled with new paint!

Pressing force: 3.5 tons Connection: 400 V Engine: 1.1 kW Container: 660-1100 litres Height open: 1930 mm Width: 1210mm Depth: 1200mm

Cat.-Nr. 09-2900-2 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 09-2900-1 in a very good condition for Ketchup, Mayonnaise, Dressing, Mustard In the industrial production of salad dressings, and mayonnaise, you will achieve optimum quality and maximum performance. The entire process plant is built compact and on a central base frame, and this allows easy transportation, quick installation and commissioning. Low Commissioning Cost Plant design ensures smooth production of your products The plant is quickly ready for operation Standardised Machines for best performance and value Our vacuum-process systems are designed to produce products such as Mayo, Ketchup, dressing, sauces, etc. The products can be produced in hot and cold method, also according to customer requirements. The product heating, and cooling is via a double jacket with insulation. The optional direct steam injection is used for rapid product heating, for ...

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

STOCK NUMBER U2064 Description: Used line for compacting powders by ALEXANDERWERK (Germany). Line consist of: - feeding system - includes: 50 l powder container, rotary valves, vacuum pump, piping and bag filter. - horizontal, twin screw, feeder with adjustable working speed in range 0-77 rpm. - granulating system - includes - preparation granulator and two precise granulators, type RFG 150N. All granulators works with adjustable speed in range 0-112 rpm. - intermediate tank with screw type agitator, working with adjustable speed in range 0-20 rpm. - roll compactor ALEXANDERWERK model WP170/120V, designed in stainless steel. Machine has two rolls, each with width 120 mm x diameter 170 mm, mounted vertically. Rolls are working with adjustable speed in range 0-20 rpm. Driven by gearbox and electric motor 7.5 kW. Rolls are pressured via hydraulic device. Maximal pressing power up ...

Cat.-Nr. 11-1050 new COMPLETE For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Juice from Fruits and Vegetables Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper For emptying fruits or vegetables from wood or PVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2339 – Eurolux Automatic Continuous Belt Press EL-1000 for producing fruit juice and fruit wine, cider from apples, pears Capacity: up to 3000 kg/fresh fruits Cat-Nr 06-1101 – Eurolux Floating Lid Tanks in AISI 304 4 x 1000 Litres,4 x 500 Litres, 4 x 300 Litres Cat-Nr 10-2351 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 1500 Litres Juice/h Cat-Nr 10-2344 – Eurolux Bag-in-Box Filler EL-1800 For filling liquids (frui ...

Downpour record Grey iron GGG50 1500 x 1500 chamber filter records Downpour records for chamber filter pressing 1500x1500 we can offer to you for almost all arrangements chamber filter records also in PP, filter cloths and spare parts almost all manufacturer.

Chamber filter pressing rack Filox uses 1200 x 1200 with approx. 100 records

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

Technical data: Fruit wash, grind, pressing then the juice pasteurization and bag-in-box packaging pour performance up to 750 L/h incl. mounted hydraulic large box emptying wash grinding plant Kreuzmayr KWEM 1000 cover press Kreuzmayr KEB 500 Pasteur Kreuzmayr PA 750 oil bag-in-box fillers Kreuzmayr CBF 900, incl. 6-digit series bottling juice pump, strainer, 2 PCs. juice buffer tank 220 litre stainless steel base frame, Tandem chassis with tyres 195/50-10 plan building with gas spring lift for the two side walls, roll-over tarp back 4 PCs. crank rotating supports for the horizontal alignment of the System cleaner, air compressor and complete piping fix established

Producer: Nowicki Type: Hercules SNV-180 Power: 11 kW Weight: 2170 kg Capacity: up to 400 kg / h Power supply: 400 V / 50 Hz - Separator for bones NOWICKI type Hercules SNV-180 - Designed for all kinds of beef and pig bones - Chamber Volume 7.7 litres - Average cycle time of 30 seconds - Press time (adjustable) from 1 to 10 seconds - Maximum pressing force 105 t - Cylinder inside 0.7 mm / cylinder outside 5 mm - High performance and efficiency (25-80% profit) Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

The filter is designed in modular design consisting of the feeding and discharge part and also of one central part. On these modules vacuum trays are mounted, which are divided into individual filtrate zones, the length of which corresponds to the belt forward stroke. The individual modules are bolted to each other. It will be possible to change the filter area later on by addition or removal of one or several modules. Each module consists of the frame, the vacuum tray and various devices for belt transport, feeding, and discharge of the media, cake discharge and filter belt cleaning. Total width with filtrate pipe and valves: approx. 2.3 m Total length: approx. 8.9 m Total height: approx. 1.9 m Weight: approx. 5.5 t Effective belt width: 1.0 m Effective belt length: 6.5 m Belt fo ...

Filter area: 6.5 m2 Material: polypropylene Total width with filtrate pipe and valves: approx. 2.3 m Total length: approx. 8.9 m Total height: approx. 1.9 m Weight: approx. 5.5 t Effective belt width: 1.0 m Effective belt length: 6.5 m Belt forward stroke: 0.5 m Filtrate zones: 13 zones a 0.5 m Zone arrangement selected (variable): zone 1-2 filtration zone 3-4 1st wash (overflow weir) zone 5-6 2nd wash (overflow weir) zone 7-9 3rd wash (nozzle system) zone 10-11 steaming zone 12 pressing & blowing zone 13 dewatering

A latch is manually placed on the filled bottle. By pressing the Capper on the lid of the screwing process starts automatically. An additional operating of a lever or button is not necessary. Technical data: -pneumatic type -Adjustable torque -automatic pressure start -40 mm standard screw head (suitable for z.B: Ø 28 mm cover) -50 mm screw head available (can be used up to approx. Ø 40 mm cover) -Capacity: approximately 500-700 / HR -Working pressure: 5 bar Max -Torque: 4 16 kg / cm -Weight: approx. 700 g

PicoPac VM405 shell seal device for Assietten menu trays incl. heat tunnel NHG801 Sealers with two-hand control Operating the device without guard sewn-on prevents safety device on the protective cover of the press Allows remove fast and tool-less quick change facility of the pressing frame of all parts to clean the device E.g. Heating tunnel is equipped with propane gas burner (supplied with pressure reducer, but without gas cylinder) Burner has a pilot flame burner with brief interruptions to, turn back completely, and then again turn on without again having to light Adjustable chain belt speed Heating tunnel is height-adjustable and suitable for the connection to other devices Both devices must be cleaned thoroughly before operating, because dirty

Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg

1 piece Sideros suction system type ECO 6 HC, 9000m3/h for plasma and firing cutting systems for suction firing table from 2.5 m - 3.0 m width (at 500 mm module width) suction and filter system with integrated fan, automatic, dust-duty filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,500 m3/h and a static pressing of max. 2,500 Pa. Filter class M with a separation degree of > 99.9% (BIA use category U,S,G,C). Technical data: volume flow fan 9,000 m3/h Volume flow Filter: 4,000 m3/h Press: 2. 500 PA filter area 60 m2 filter type: PTFE membrane separation degree: > 99.9% cleaning: rotary duesen connection power: 5.5 kW, 10.7 A voltage: 3 x 400 V, 50 Hz compressed air connection: 6.0 bar sound level: < 68 dB (A) dimensions: height: 2,100 mm Depth: 1,413 mm Width: 1,413 mm Weight: 62 ...

New hydraulic press brake. Pressing force: 125Tn. Working lenght: 3200mm. Distance between housings: 2650mm. Stroke of the ram: 120mm. Distance between table and ram: 415mm. Depth of throat: 320mm. Motor power: 7,5kw. Weight: 7850Kgs. Dimensions: 3300x1800x2690mm. CE.

EWD ESTERER HD_30 SV high in TOP ZUSTAND ! Repairs 2009, with power Pos.1 frame width 750 mm through shoehe max. 750 mm stroke 600 mm speed max. (also when idle) 300 rpm Number of rollers 4 pcs. feed 0 - 12 m/min operating side, seen in cutting direction: right pressure register. machine and base plate in torsional casting construction. gate rollers are divided for easy exchange, hydraulic lifting and lowering of the upper gate rollers, adjustable roll pressure. Electric feed, for stepless regulation the feed speed. central lubrication for all frame guides. Upper guide with water cooling, with water-covering. swing shaft with grease-lubricated roller bearings, flywheel hubs made of high-quality sphaero casting, swing shaft and flywheel hubs in the press bandage. fixed and empty disc for single-space operation. electric slide (0.55 kW). with gate hanging (saegenspanner, saegeblaet ...

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 550 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

BTS-Bag Press With the BTS-Bag Press for waste bags large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the waste volume up to 90%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 90% - Reduces frequency of waste collection - Useable for wet and dry waste - Optimum utilization of waste container - Reduces the number of waste containers - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x ): 1861 x 1200 x 630 mm Transportation height: 1861 mm Machine weight: 325 kg Cycle time: 20 seconds Noise level: 68 dB Compaction up to: 90%

Stations: Round table with 8 forming cells Paper forwarding and folding device Date stamp station Volumetric dosing with trough End folding station Pressing station Evacuation to off-conveyor Off-conveyor 1200 mm long Dosing station in food safe design Electric control in its own cabinet CE conform Package format: 75 x 50 x 35 mm or 100 x 75 x 53 mm or 120 x 80 x 60 mm Dosing range: from 250 to 500 g. Option up 1000 g. Output: 80 packages / min.

Weber ASB 400 skinner, cutting width 400mm, can be used (open) as combination machine with carriage table or (closed) with pressing unit and conveyor. You are very welcome to inspect the machine in 56070 Koblenz, Germany.

- Pressing area 2 x 1240 x 1250 mm - total pressure 2 x 25 to - max. opening width 1000 mm - total connection 4.0 kW - dimensions L=3000, W=1250,H=3050 mm - weight 2850 kg

PET-/ Can Compactor, Special Waste Baler BTS-MF60hd The BTS-MF60hd Cans_PET Special Waste Baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and many more. The special waste baler impresses with its ease of use and large filling volume, finished bales can be easily removed with the automatic bale ejector. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Solid bales with bale weight up to 70 kg - Compacts a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross strapping tying system to hold difficult material in a bale - Fully automated bale ejector, simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing  ...

Pelessierpresse Hanau, for pressing wagon wheels on axle, gemaess pictures