pressing used for sale

This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a pressing force of 1700 kN and bending length of 3110 mm.

Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface

Veneer press OTT JU 65 Pressing area 2500 x 1100 mm 4 cylinders Electric heating Machine is FUNCTIONAL From location Upper Austria fixed price NET € 4,500.0

This Bystronic Xpert 250/4100 Press Brake Machine was built in the year 2016 in Germany and has 17550 hours. The machine has a pressing force of 2500 kN.

This KOMAGE S 50 4E CNC Hydraulic Press was manufactured in the year 2017 in Germany by the Komage Gellner Maschinenfabrik KG. It has a pressing force of 500 kN. The machine is in a very condition as serviced on an annual basis directly by Komage. In total the press has worked for 23,379 production hours and 2,113,050 strokes.

Capacity: 100 t Folding length: 3200 mm CNC Brand: Delem CNC Model: Delem DA-65W Backgauge 1000 mm with  R and Z Axis SICK Laser safety guids Crowning in lower table construction    Max. bending length:        3200mm Distance between column:    2550mm Max. pressing force:        100T Dis. Beam - Table:          420mm Beam stroke:                220mm Troth beam:                 500mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               180mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  4 Crowning: ...

Capacity: 320 t Folding length: 4100 mm CNC Brand: Cybelec Max. bending length:        4100mm Distance between column:    3600mm Max. pressing force:        320T Beam stroke:                465mm Approch speed:              190mm/min. Working speed:              10mm/min. Return speed:               150mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  8 Power:                      37kW Length:                     5200mm Width:                      3200mm Height:        & ...

This Blecken PPE SE-3160 Bending machine was manufactured in the year 2007 in Spain. It is equipped with a Delem ER-70 control unit and has 4 axis. The machine has a pressing force of 1600 kN and a bending length of 3100 mm.

Capacity: 230 t Folding length: 3100 mm CNC Brand: Trumabend Max. bending length:        3100mm Distance between column:    2690mm Max. pressing force:        230T Dis. Beam - Table:          615mm Beam stroke:                445mm Table Width:                180mm Troth beam:                 420mm Approch speed:              220mm/min. Working speed:              10mm/min. Return speed:               220mm/min. Adjustment X-Axis back gauge:1000mm Crowning:                   Yes Hydraulic toolclamping:      ...

Capacity: 150 t Opening maximum: 4100 mm Workpiece height maximum: 215 mm CNC Brand: Cybelec Max. bending length:        4100mm Distance between column:    3600mm Max. pressing force:        150T Beam stroke:                215mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               110mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  6 Length:                     5100mm Width:                      2000mm Height:                     2900mm  ...

This ERMAKSAN AP 2100-35 Bending machine was manufactured in the year 2005 in Turkey. The machine has a pressing force of 350 kN.

This ERMAK CNCHAP 3600x200 Bending machine was manufactured in the year 2005 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit. The machine has a pressing force of 2000 kN and a bending length of 3600 mm.

Capacity: 175 t Folding length: 3050 mm CNC Brand: Delem CNC Model: DELEM DA-56 Max. bending length:        3050mm Distance between column:    2600mm Max. pressing force:        175T Dis. Beam - Table:          530mm Beam stroke:                265mm Table Width:                104mm Troth beam:                 450mm Approch speed:              160mm/min. Working speed:              10mm/min. Return speed:               100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  4 Crowning:                  ...

SEPARATOR BAADER, TYPE 694 Technical description: Power supply: 380-440 V/50-60 Hz Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1100 x 1000 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.

SEPARATOR BAADER, TYPE: 694 Technical description: Power supply: 230-400V /50Hz / 1,5Kw Bandwidth: 200 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 3mm; 5mm; 8mm). Dimensions: 1140 x 950 x 1300 mm This machine produces bone-free fish meat from pinbone cuttings but also from other fish cuttings with bones and skin which are yielded in fish processing. The material is submitted to a brief pressing operation between an elastic belt and a perforated drum, so that the fibre structure of the fish meat is maintained. This material may be processed into high-grade products.

This Ermaksan AP 3100-120 Bending machine was made in 2002 in Turkey. The machine has a pressing force of 1200 kN.

This Beyeler PR6 Bending machine was manufactured in the year 1997. It is equipped with a DNC 800 control unit. The machine has a pressing force of 1000 kN and a bending length of 3100 mm.

This TECHNOLOGY ITALIANA TP GAMMA SE 2510 Bending machine was made in 2022. The machine has a pressing force of 250 kN. It has still one year of warranty included.

Press also ideal for gluing 4200 x 450 x 60 mm Practical and space-saving 15 pieces press cylinder ( diaphragm cylinder ) with press stroke per cylinder 70 mm, pressing force per cylinder 6800 N 16 pieces of hold-down Loading dimensions L 4.5 x W 1.1 x H 0.5 m Net weight 600 kg OPTIONS the last 3 images Price on request 2 press frames for turning 3 press frames as gluing stars 4 press frames

This EHT EHPS 25-30 Bending machine was manufactured in the year 1991. The machine has a pressing force of 2500 kN.

This Durma AD-R 30220 Bending machine was manufactured in the year 2012 in Turkiye. The machine has a pressing force of 2200 kN and a bending length of 3050 mm.

This HACO ERM 36150 bending machine was made in the year 2014 and has 1962 hours. It is equipped with a CONTROLLER M8519T control unit. The machine has a pressing force of 150 kN. Robot can be purchased additionally for price upon request.

This LVD DVDF 160T Stamping machine was manufactured in the year 2003. The machine has a pressing force of 1600 kN.

Format range: 915 mm min. 45 mm Equipment: Longitudinal seam, folding floor, double edge, new electronic Upper gluing unit HHS Xact, 4 channel with 2 application heads, high pressure, Windscreen under-glue unit left, feeder with vibrator Vorbrecher right and left, kicker, counter, digital position indicators, motorized transfer station, pneumatic, intermittent pressing belt. Overhaul 2023: cleaned, tested, painted, new pier and transport belts. Other: Machine can be visited by arrangement while running.

This WICKERT WKP 2560/5/5 was manufactured in 1996 in Germany. It is equipped with Siemens PLC control S5. This machine has a pressure capacity of 2560kN. Its pressing area is 500x500mm. It has a piston stroke of 500mm and a piston diameter of 290mm. Contact us anytime for further information.

automatic baler Manufacturer: HSM Type: VK 42/800 Year of construction: 2002 specifications: Pressing force: 42 t Channel format: 700 x 800 mm (W x H) Binding: 4-fold horizontal Filling opening: 800 x 650 mm Drive power: 30 kW Optionally with conveyor belts

Electric pneumatic edge press Haug HFK 2200 for pressing edge material on wood with heating. Incl. 3 table extensions Swivel worktable, Working size max. approx.: 1,400 x 2,500mm, heater: 1,7 kW

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...

Specifications Maximum pressure: 9 tons Pressing force: 2.76 kg/cm² Bale size: 650x500x580 mm Power supply: 400V/4kW Year of construction: 1996 Productivity: approx. 3 bales/hr Machine is fully functional, after technical supervision.

pressure: 20,0 t stroke: 185 mm table surface area: 170 mm Breite column travel between the guideways: 510 mm weight of the machine ca.: 112 kg dimensions of the machine ca.: 1630 x 560 x 730 mm Furnishing: - Standard with pressure cylinder that can be moved to the left and right - For aligning, pressing, bending, assembling gears, discs, etc. - Standard with foot pedal and hydraulic hand pump for piston delivery - Standard with support prism for aligning shafts - With automatic piston retraction by integrated return spring as standard - Height-adjustable press table with locking bolts - Large manometer for reading the compressive force - Including two-stage hydraulic pump - Robust construction with welded steel frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kolbus Perfect Binding Line, Equipped With: Gathering Machine: Kolbus ZU 804, AGE: 2006, Basic Frame with 21 Gathering Stations, 20 Standard Feeders, 1 Hand Feeding Station, Book Block Feeder, ZA 800 Stacker Delivery, AGE: 2006, Kolbus VA 422 End Sheet Unit, AGE: 2006, Air Center Becker CS ZU804/01 Vacuum Unit, AGE: 2006, Reject Unit AS 841 To The Right, Integrated Jogging Station, Transfer Channel As Connecting Unit To The Binder. Perfect Binder: Kolbus KM 473, AGE: 2006, 32 Clamps, Hand Feeding, Co-Pilot System Monitor, Main Milling Station, Equalized Milling Station, Notching Station, Micro-Notching Station, Brushing Station With Roller Brush, 2 x Pre-Melters LH 370, AGE: 2006, Nordson PUR Spine Gluing System, Hotmelt Spine Gluing Unit, Hotmelt Side Gluing Unit, Gauzing/Lining Station, IR Heating At Curve, Scoring Station For 4 Scores, 2 Pressing/Nipping Stations, Stream Cover Feeder  ...

(2007); Max. Roll Length 20 M; Min. Daylight between Roller 960 mm; Max. Ram stroke 1050 mm; Top Roll diam. 500 mm; Bottom Roll 420 mm; 8 sets of Back-up Rolls; Min/Max Bottom Roll Centers 500/800 mm; Pressing Speed 1 to 6 mm/sec. Ram Approach 60 mm/sec; Main Motor 125 HP. Including Spare for Bottom Roller, control panel, panel boxes and conveyors. Capacity: 2200 TON, Working size: 20,000mm x 25t, 5,000mm x 40t

automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of construction: 2002 Operating hours: approx. 30,000 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Duct cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank volume: 2,200 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other features: - Automatic cutting edge release - Large digit display for bale length and fault indication

Stock# UG6357 Used line for production compacted cosmetic powders by Co.Pack (IT). Line is working on pans with diameter 58.5 mm - output up to 1500 pcs/hour, and pans with diameter 36.5 mm - output up to 3200 pcs/hour. Line consist of: - automatic, vibrating feeder of pans. - pressing machine Co.Pack , Rotopack 100 PS/4 - automatic powder feeder, hydraulic press and automatic discharge. - station for cleaning bottoms and edges of pans - packaging station - where pans are packed into plastic trays. Line is new 2013.

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 10 / 2004 Machine No.: 6114.134. S Serial No.: 250143017 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

Machine Type: Horizontal Bending Machine Manufacturer: Kunkel Type: URM 30 Year of construction: to follow Condition: used Offer will only be sent if a complete imprint is provided! Price Vb Location Warstein , Germany Reference MV-KÖL-0424-13 DESCRIPTION We offer you a used horizontal bending machine from the manufacturer Kunkel. Pressing force 30t Weight approx. 1.2t more data and pictures will follow. Availability: by appointment, machine still in production. Loading possible. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted

used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

Format Range: max. 1000 mm min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 point gluing, electronic gluing unit HHS, 4 channel with 2 application heads, Disc gluing unit left, feeder with vibrator, Primary crusher right and left, lower central transport in primary crushing station, new electronic overtaking fold (rummage) with touch screen and Order memory, folding floor extension module A2 with lower Central transport, kickers, counters, digital position displays, Bobst CUBE control, additional center feed top/bottom in folding, cutting alignment on the press belt, pneumatic, clocked press belt. Overhaul 2024: cleaned, tested, painted and with new feeder and transport belts, as well as equipped with new pressing belts. Other: The machine can be viewed while it is running by arrangement.

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 02 / 2003 Machine No.: 6114.734. R Serial No.: 240035357 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

This KOMAGE Mechanical Powder Press was manufactured in the year 1998 in Germany by the Komage Gellner Maschinenfabrik GmbH. It has a pressing force of 50 kN. The machine is in a good condition for its age as serviced on an annual basis directly by Komage.

Meiko EcoStar 545 D hood type dishwasher Excellent cleaning qualities CrNi washing and rinsing systems from above and below Digital temperature displays for wash and rinse water Eco-Filter Caustic Cleaning/Tank Regeneration Tank Cover Screens (CrNi) Temperature-dependent washing time extension Integrated rinse aid dosing device Simplest operation and optimal ergonomics Fully electronic program sequence with clear operating display Digital temperature display for washing and rinsing temperatures. Most convenient operation thanks to all-round brackets made of CrNi. Automatic hood start – only conscious pressing causes the program to start Self-cleaning program Lowest operating costs Effective rinse system with only 3 l per rinse cycle Double-walled insulated hood as standard Trailed wash tank with a tank capacity of only 22 l Above-average capacity Three prog ...

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141892 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

Type: HPDb 630-2500/1400 factory number H/7447, year of production 2000 Double-column press Pressing force 630-6300 KN Lifting force 750 KN Stroke 1000 mm Lifting speed from 450 mm/s Load 16-50 mm/s up to 450 mm/s Drive power 2x 55 kW Blanking shock dampers Damping force 6300 kN Damping stroke 15 mm Spindle adjustment path 400 mm Auxiliary unit 35 kW Bed area 2500 X 1400 mm Press data Press weight approx. 100,500 kg Tool weight max. 10,000 kg Hydraulic oil weight approx. 3420 kg Foundation load static approx. 1140 KN dynamic approx. 230 kN maximum load = Fstat. + Fdyn. Oil tank capacity approx. 4020 liters Installed power approx. 155 kW Current consumption approx. 275 A Control cabinet Length approx. 2400 mm Depth 500mm Height 2200 mm

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

Description HORIZOANTAL HYDRAOULI BALING PRESS WITH AUTOMATIC STRAPPING Pressing power 28 000 kg Main motor 20 HP Strapping motor 1 HP Automatic Strapping Bale dimension: Width 650 x Height 700 x Length Adjustable

Equipped with control box with electric motor, weber punch pressing, work platform (2000x700x1700mm); Viewing by appointment only

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 10 / 2004 Machine No.: 6114.734. S Serial No.: 250143017 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

The machine is in good technical condition, it is possible to test it by agreement. Machine weight: 8500 kg Nominal pressing force: 100 t (Mp) Working table length: 3100 mm Accessories: (straight and curved punch, die 10,12,16). Control system CYBELEC DNC 800.

Specifications Maximum pressure: 36 tons Pressing force: 46.75 tons/m² Duct cross-section: 700x1100 x reg mm Bale weight: 380 kg Power supply: 400 V/ 15 kW Year of construction: 2009-2010 Number of ties: 4 vertical Dimensions of the tailgate: 1030x1100 mm Weight: approx. 3.9 tonnes Bale tying: manual

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg