pressing used for sale

automatic baler Manufacturer: PRESONA Type: LP 65 VH 2 Year of construction: 2012 specifications: Press force: 65 t Specific pressing force: 7.87 kg/cm² Drive power: 45 kW Throughput: 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 425-575 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 26 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2012 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 5,000 mm Climbing length: approx. 10,500 mm according to attached pictures

Capacity: 1000 t Distance between uprights: 5010 mm Stroke: 3000 mm Day light: 550 mm Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100  Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground   Capacity Kg:           1000 Ton Distance between column:5010mm Table Length:          3000mm Table Width:           2000mm Table Height:          550mm Ram stroke:            1450mm Approche speed:        50 ...

Outside diameter maximum: 580 mm Inside diameter maximum: 580 mm Pipe length maximum: 1170 mm Angle degrees maximum: 0 Wall Thickness: 1 mm Horizontal bending machineEUROMAC - Digibend 360  Table Length:      1170mm Table Width:       580mm Max. pressing force:36 Beam stroke:       250mm Working speed:     6 - 24mm/min. Return speed:      60mm/min. Power:             5,5kW Capacity flatt:    20 x 200mm x mm Length:            1200mm Width:             1200mm Height:            700mm Weight:            2000kg

automatic baler Manufacturer: PRESONA Type: LP 65 VH2 Year of construction: 2007 specifications: Press force: 65 t Specific pressing force: 7.27 kg/cm² max. oil pressure: 265 bar Press force pre-press: 25 t Drive power: 45 kW Throughput: approx. 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 420-570 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 21 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2007 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 6,000 mm Climbing length: approx. 10,500 mm according to attached pictures Subject to errors in the technical data.

Capacity: 320 t Folding length: 4050 mm CNC Brand: _Unknown / Other CNC Model: T8000Te 3D TOUCH 2019 new TRUMPF T8000Te TOUCH Large upper toolling set  Large lower tooling set Bending arm front side 45 Gr  Over floor machine NOT in ground   Max. bending length:        4050mm Distance between column:    3550mm Max. pressing force:        320T Dis. Beam - Table:          730mm Beam stroke:                350mm Troth beam:                 400mm Approch speed:              100mm/min. Working speed:              10mm/min. Return speed:               100mm/min. Adjustment X-Axis ba ...

Compressive force: 10 tons Piston stroke: 180 mm Table width: 140 mm Passage (E): 330 mm Passage (F): 95 mm Distance cylinder to table (F1): 200 mm Distance cylinder to table (F2): 365 mm Cylinder movable: 180 mm Width (A): 570 mm Depth (W): 500 mm Height 1 (C): 735 mm Height 2 (D): 1070 mm Weight, approx.: 55 kg Equipment: - Standard with automatic piston retraction - Easy reading of the pressing pressure via pressure gauge - Versatile in assembly and workshop applications - Ideal for bushing, straightening, bending, broaching,... - Robust construction due to welded steel frame - Support table height-adjustable, fixation by means of bolts - Prism pads included

CNC press brake Manufacturer EHT Type EHPS 20-35 Year of construction 1995 Control DNC800 Bending length 3550mm pressing pressure 200t Block matrices and segments are also available Documentation and operating instructions available Machine was overhauled 3 years ago and put aside. No longer energized.

pressure: 160 t distance between columns: 1500 mm stroke: 400 mm working feed: 2,4 mm/sec : 700 slide adjustment -horizontal: 2150 mm tank capacity: min 30 l feed speeds: 7,48 mm/sec pressing speed: 2,4 mm/sec return speed: 9,35 mm/sec Pressure power: 255 bar table-size: 1740 x 996 mm total power requirement: 3 kW weight of the machine ca.: 2,65 t dimensions of the machine ca.: 1,74 x 1,73 x 2,185 m This Profi Press portal press with a manually movable portal is made in the Netherlands and has a 160 tons capacity. The quality of these hydraulic portal presses is very high and the operation of the press is similar to the operation of our well-known motorised workshop presses (they are made in the same factory). Please find the technical specifications of this type of Profi Press below and do not hesitate to request a free quotation or to contact us for any further information. The data  ...

RUIAN KODA MACHINERY punch press, built in China in 2020, was used in a production line to create film gloves rips. The machine has 3 tonnes of press force and the ability to change punches of different sizes. The total weight of the machine is 200 kg. Technical specifications of the RUIAN KODA MACHINERY pneumatic press - pressing force: 3 t - workspace (L x W): 260 x 260 mm - working stroke: 150 mm - pneumatic pressure: 0.5-0.8 MPa - power: 30 W - power supply: 220 V - total weight of the press: 200 kg

Used thermoforming roll line by Tepro, model LPP 420-30/3618. New: 2014. Machine serviced, very good condition. Technical data: Machine stroke mm 300 Forming chamber mm 282x356 Pressing depth mm max. 130 Filling field length mm 900 Distance between tools mm 1800 Efficiency cycle/min 4-12 Vacuum pump m3/h 100 Power supply V/Hz 3x230/50 Power kW ~ 13.5 Compressed air pressure bar min. 6 Cooling water consumption l/min 8-15 Compressed air consumption Nl/cycle 100-150 Width of the upper foil mm 420±1 Bottom foil width mm 420+2 Max. bottom foil thickness (soft / hard) mm 0.3 / 0.6 Max. bottom foil diameter mm 400, sleeve 76 Max. top foil diameter mm 400, sleeve 76 Weight kg ~1300

MAAD HSSM 1550/1.5 folding machine which was built in Poland in 2017, is designed for folding thin steel sheets with a maximum thickness of 1.5 mm along a straight line at a specific angle. This functional machine, based on an innovative design, guarantees comfortable operation and a wide range of applications, which makes it ideal for many different industries. The MAAD segment folding machine has a clamping bar and a bending bar equipped with interchangeable segment knives of different lengths. Mounted on inbus screws, the segments are made of the highest quality steel, which ensures long-lasting operation of the machine while maintaining excellent bending parameters. After pressing a button on the control panel, the HSSM 1500/1.5 electric segment bending machine operates in automatic mode. The bending bar moves to the set angle and then returns to its initial position. The total we ...

Pressing force 1000 kN Table size 750 x 560 mm, diarrhoea opening 100 mm Installation height 800 mm, stroke 500 mm Projection 360 mm Bear size 530x400 mm, 2 T-slots Ram speed: down 200 mm/sec, up 400 mm/sec Connection load approx. 21 kW Incl. Feeder WE16 for 160 mm bandwidth Coil tray and straightening unit Fabr. OFFICE; Type CA200/R40-7, YOC 1994 Reel, loop control Two-hand operation Manuals

Specification IMPERIA F + feeder + Special batch Delivery · Nr. 1 (one) S/H IMPERIA F 120x165cm with electronic feeder and special batch delivery system, delivered, controlled and checked with 6 months warranty · Year of manufacture 2000 · with electronic feeder (no high pile) · Speed Approx. 1350 strokes per hour · min board thickness 400gr/m² · Corrugated board thickness max 7mm · pneumatic clutch- variable speed, · Equipped according to CE regulations · special suction cups with 50mm telescopic – pneumatically adjustable arms · SPS System · PICARD die cutting plate · micrometric adjustment of the pressure in addition to the standard one · special universal chase-mobile delivery table for conveying blanks, pneumatically controlled with automatic lowering device allowing to the opera ...

Fully automatic production line for concrete pipes DN300 up to DN1200 based on RADIAL PRESS or PACKERHEAD Technology. BFS-Souveraen Type: 1230 Condition: Very good The SOUVERAEN is the BFS pipe machine for high-performance production with first-class product quality. The counter-rotating pressing tool takes over the concrete compaction and is controlled by a sophisticated control system. The feeding of the concrete will be torque controlled, instead of concrete weight in standard systems. So the compaction quality is always secured. Production of concrete pipes according to all international standards. Year of construction: 2003, but has few hours, since it has worked very little since 2018 Location: Italy Condition: is in very good shape and well maintained. The machine is based on the packerhead technology (radial press) from BFS. The automatic handling is an open flo ...

Number of axes 5 Pressing force kN 1000 Working length mm 2600 stroke mm 200 Operation mm/s 10 Delivery speed mm/s 200 Return speed mm/s 200 Main engine power kW 11.4 Control BC 55 Graphics Safety Fiessler Light Barriers Accessories Various press brake tools Operational documentation

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

1 Clamp Perfect Binder For Hotmelt Adhesive, Glue Vapor Extraction, Flaps And Creasing Tools, Envelope Double Sheet Control, Touch Screen With Simple Setting Via Icons, Preheating Timer, For Spine And Side Gluing, Copy Counter, Error Analysis, etc., Pneumatic Opening And Closing Pliers, Automatic Adjustment Of Nipper Opening According To Block Thickness, Side Gluing Disc According To Block Thickness, Back Creasing According To Block Thickness, Creasing Depth, Positioning Of The Rear Envelope Guide Rail According To The Envelope Width, Adjustable Milling Depth 0-3mm, Backworking Station With A Combination Tool With Dust Cutters, Height Adjustable Notching Knife And Ring Brush, Hotmelt Adhesive Basin With Two Application Rollers And Glue Squeegee And Integrated Side Gluing Unit With Slanted Discs (Production Possible Without Side Glue), Cover feeder with integrated double creasing unit (de ...

pressure: 100 t table length: 2000 mm table width: 1580 mm stroke: mm pressing speed: mm/sec voltage: 400 V return capacity: t max. table loading capacity: 10.000 / 20.000 kg total power requirement: 18 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm max.load upper table no swiveling 10t / swiveling 6t max.load lower table 22t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Goodnature cold press, model X-1. Year of production 2014. Capacity up to 1,000 bottles per day. Power supply 220V 50Hz X-1 is a professional press capable of producing a thousand bottles of cold-pressed juice per day. X-1 is used by successful cold-pressed juice producers, nut milk producers and cider producers. The machine is almost unused. She worked several times. The bags have been the same since new - they show minimal wear. It's like brand new. Everything works fine without any problems. Perfect machine for small juice producers, large grocery stores or juice shops. It can also work in the production of nut milk or cider. The machine is very easy to clean and maintain. Comes with 3 different shredding discs and 2 bags. Original user manual. The juice is squeezed gently but firmly. The operator sets the pressure and controls the time. It can work fast with lower effi ...

pressing area: 3000mm x 1300mm; opening: 450mm; heating: electrically / thermo-oil; max. temperature: 120°; plate sourface: stainless steel; press opening: automatically - timer / manual; emergency stop switch: yes / ripcord; pressure: 120t; number of cylinder: 6; electriticy: 36A; motor power: 21 kW; machine length: 3600 mm; machine width: 1800mm; weight: 4500kg;

The machine is in good technical condition, it is possible to test it by agreement. Machine weight: 8500 kg Nominal pressing force: 100 t (Mp) Working table length: 3100 mm Accessories: (straight and curved punch, die 10,12,16). Control system CYBELEC DNC 800.

The machine is in perfect technical condition. Pressing force: 130t Max. sheet length: 3050mm. Upon prior arrangement, the possibility of inspection in progress.

Capacity: 135 t Folding length: 3050 mm CNC Brand: _Unknown / Other Max. bending length:        3050mm Distance between column:    2550mm Max. pressing force:        135T Dis. Beam - Table:          310mm Beam stroke:                130mm Table Width:                180mm Troth beam:                 200mm Approch speed:              100mm/min. Working speed:              9mm/min. Return speed:               65mm/min. Adjustment X-Axis back gauge:1000mm Power:                      7.5kW Length:      &nb ...

specifications: - Air output: 6,000 m³/h - Pressing PA max: 500 Pa - Diameter pressure connection: 350 mm - Filter area: approx. 3.25 m² - Working surface (W x H): 2,080 x 1,930 mm - Area baffle: 1,800 x 1,800 mm - Dimensions of adjustable baffle plates (li + re): each 1,800 x 440 mm Engine data: - Power: 1.8 kW - Voltage: 380 V (star-delta) - Current: 3.8 A - Frequency: 50 Hz - Speed: 1,415 rpm - Transport dimensions (H x W x D): 2,500 x 2,000 x 800 mm (with pallet and mounted baffle plate and nozzles) - Weight: approx. 300 kg - Number of packaging units: 1 piece (on disposable pallet) The extraction wall was completely refurbished in our house and the fan was checked for its correct function. The extraction wall was completely cleaned and provided with new filter mats. Hint: Pipe components required for on-site operation can be requested from us. (Cha ...

Workpiece diameter: 2750 mm Distance between centers: 1375 mm Number of rolls: 1   CNC Spinning machine with LEICO Play-Back control Large package pressing moulds tailstock Floorplate construction carriage Large package with moulds in diameter: Ø  950 Ø1250 Ø1270 Ø1375 Ø1300 Ø1400 Ø1500 Ø1600 Ø1900 Max. product  over bed:2400 Max. product  in de zak:2750Ø Centerhoogte over bed: 1200mm Afstand tussen centers:1375mm Max. plaatdikte:       6mm Hub X-Achse:           1400mm Toerental:             850Rpm Slag pinole quil:      750mm Lengte:                6500mm Breedte:               5200mm Hoogte:                2600m ...

Width 80 cm Year of construction 2010 Vertical delivery Pressing station mobile Delivery date: short term Price on request. We deliver and install worldwide!

Machine weight: 8000 kg Nominal pressing force: 100 t (Mp) Clamping surface of the table: 3300 mm Machine dimensions lxwxh: 3800 x 2000 x 2500 mm

The punching center is in good technical condition. Pressing force: 30t Fabriwin toolkit and software included By prior arrangement, the possibility of a tour in progress.

Capacity: 150 t Folding length: 360 mm CNC Brand: Robosoft Max. bending length:        3600mm Distance between column:    3100mm Max. pressing force:        150T Dis. Beam - Table:          450mm Beam stroke:                200mm Troth beam:                 250mm Approch speed:              100mm/min. Working speed:              10mm/min. Return speed:               1000mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  5 Crowning:                   Yes Power:                       ...

pressure: 80 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the ...

The die cutting machine is in good technical condition. Pressing force: 30t Max. sheet size: 1000 x 2000mm By prior arrangement, the possibility of a tour in progress.

Capacity: 320 t Folding length: 4420 mm CNC Brand: Trumabend CNC Model: TASC 6000 4 Hydraulic cilinders 2 + 2 Left and Right Lazer safe safety system Hydraulic clamping Electro hydraulic down stroking  Backgauge 4-axes system Rack and pinion drive for X and R Axes Bending help T1 and T2 on front machine Availebel after summer 2023 Max. bending length:        4420mm Distance between column:    3680mm Max. pressing force:        320T Dis. Beam - Table:          735mm Beam stroke:                445mm Table Width:                200mm Troth beam:                 420mm Approch speed:              220mm/min. Working speed:  &nb ...

pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 4,0 mm/sec return speed: 10,0 mm/sec engine output: 4,0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounte ...

Vertical baler HSM VL 500.2, built in 2007 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2007 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Capacity: 130 t Folding length: 3230 mm CNC Brand: Trumabend CNC Model: TASC 6000 4 Hydraulic cilinders 2 + 2 Left and Right Lazer safe safety system Hydraulic clamping Electro hydraulic down stroking  Backgauge 4-axes system Rack and pinion drive for X and R Axes Bending help T1 and T2 on front machine Availebel after summer 2023 Max. bending length:        3230mm Distance between column:    2690mm Max. pressing force:        130T Dis. Beam - Table:          505mm Beam stroke:                215mm Table Width:                120mm Troth beam:                 420mm Approch speed:              220mm/min. Working speed:  &nb ...

Capacity: 25 t Opening maximum: 1250 mm Workpiece height maximum: 150 mm CNC Brand: Delem CNC Model: Delem DA-66W PressbrakeGASPARINI - X-Press 25 MACH-ID 7555  Max. bending length:        1250mm Distance between column:    1200mm Max. pressing force:        25T Dis. Beam - Table:          150mm Troth beam:                 340mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               200mm/min. Adjustment X-Axis back gauge:500mm Number of controlled axis:  5 Power:                      3kW Length:          &nb ...

Specifications Maximum pressure: 85 tons Pressing force: 103 tons/m² Trunking cross-section: 750 x 1100 mm Power supply: 400 V/ 45 + 30 kW Year of construction: 1992 Number of bindings: 4 - fold vertical Dimensions of the tailgate: 1020 x 1750 mm Weight: 26 tonen Bale binding: automatic

Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars

Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Sell a press on behalf of the factory, which was fully functional until the plant was shut down. Pressing force 250 tons Length 3050mm Sheet thickness max 15mm A lot of accessories Dimensions transport approx. 3,2m 2m 3,5m high 20to Removal must be organized by the buyer. Crane rental nearby, it can be helped supportively.

Cool Compact Magnos 650 Refrigerator with Glass Door  Versatile convection refrigerator  excellent for commercial kitchens, restaurants, butchers, bakeries Cool Compact Refrigerator Magnos 650 with Glass Door suitable for use with GN 2/1 containers (grid size 530 x 650) with convection cooling and electronic control inside/outside CNS 18/10 ( also back wall, bottom and cover plate ) Warning by visual and acoustic signal Compressor Protection Function suitable for the tropics - suitable for ambient temperatures up to 43ºC Automatic evaporation of condensation by hot gas Cooling body made of one piece high-pressure foamed self-closing and lockable door, door hinge on the right Evaporator-free interior Drawers with telescopic full-extension extensions made of stainless steel 1.4509 Very stable drawer guide: loadable up to 60 kg Electronic control with 4 top performanc ...

Vertical baler HSM VL 500.2, built in 2005 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2005 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Catalog No. : 6536 Type: TRUMATIC 500 R Producer: Trumpf Made in: 2000 Characteristic: Hours on: 36200 h Pressing force: 220 kN Travel length X-axis: 2500 mm Travel length Y-axis: 1250 mm Machine weight: 11050 kg Equipment: Tool Cartridges (2x) USB Interface

Veneer press OTT JU 65 Pressing area 2500 x 1100 mm 4 cylinders Electric heating Machine is FUNCTIONAL From location Upper Austria fixed price NET € 4,500.0

This HACO PPV 30220 Bending machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO ATL 550 control unit. The machine has a pressing force of 2200 kN and a bending length of 3000 mm.

This Trumpf TrumaBend V85S Bending machine was manufactured in the year 2003 in Austria. It is equipped with a Trumpf control unit and has 4 axis. The machine has a pressing force of 850 kN and a bending length of 2550 mm.

Capacity: 100 t Folding length: 3200 mm CNC Brand: Delem CNC Model: Delem DA-65W Backgauge 1000 mm with  R and Z Axis SICK Laser safety guids Crowning in lower table construction    Max. bending length:        3200mm Distance between column:    2550mm Max. pressing force:        100T Dis. Beam - Table:          420mm Beam stroke:                220mm Troth beam:                 500mm Approch speed:              200mm/min. Working speed:              10mm/min. Return speed:               180mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  4 Crowning: ...

Capacity: 320 t Folding length: 4100 mm CNC Brand: Cybelec Max. bending length:        4100mm Distance between column:    3600mm Max. pressing force:        320T Beam stroke:                465mm Approch speed:              190mm/min. Working speed:              10mm/min. Return speed:               150mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  8 Power:                      37kW Length:                     5200mm Width:                      3200mm Height:        & ...

This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a pressing force of 1700 kN and bending length of 3110 mm.

Capacity: 230 t Folding length: 3100 mm CNC Brand: Trumabend Max. bending length:        3100mm Distance between column:    2690mm Max. pressing force:        230T Dis. Beam - Table:          615mm Beam stroke:                445mm Table Width:                180mm Troth beam:                 420mm Approch speed:              220mm/min. Working speed:              10mm/min. Return speed:               220mm/min. Adjustment X-Axis back gauge:1000mm Crowning:                   Yes Hydraulic toolclamping:      ...