pressing used for sale

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

Specifications Maximum pressure: 60 tons Power supply: 400V / 7.5 kW Pressing force: 4.54 kg/cm² Year of construction: 2002 Bale size: 1200x1100x1100-1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 600 kg Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Vertical baler HSM VL 500.2, year 2008 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2008 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Specifications Maximum pressure: 60 tons Power supply: 380V/ 11 kW Pressing force: 6.81 kg/cm² Year of construction: 2012 Bale size: 800x1100x1200 mm Productivity: approx. 3 bales/hour Bale weight: approx. 370-410 kg Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

pressure: 20 t stroke: 185 mm table-size: 480 x 1060 mm work speed: 10,0 mm/sec return speed: 10,0 mm/sec weight of the machine ca.: 0,53 t total power requirement: 2,2 kW dimensions of the machine ca.: 1150 x 500 x 1200 mm - hydraulic horizontal bending machine - Solid work surface made of stabilized steel - Machine made of hardened and ground forged steel - Digital display for stroke adjustment - 1x tool kit - stepless adjustment of speed / pressing force - Double foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

9 injection moulding tools for the production of rollers - along with a wide range of accessories As a result of a restructuring of our customer, we offer for sale 9 injection molds for the production of various types of castors for furniture and chair castors, including customer addresses. The pictures represent the basic nature of the different roles. These injection molds could be used to set up a complete production facility for the production of rolls. The basic body of the castors can then be supplemented with various inserts (depending on the customer's requirements) for final attachment to the end product, e.g. a chair. This offer also includes the following accessories - which are part of the production process: • 1 x punching tool (for the roller roller) • 1 x press (for pressing the pins and shafts) • 1 x automatic assembly machine for spring washers � ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

Equipments: with pressing unit Upright stack delivery

Format Range: max. 1650 mm min. 275 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS X-tend 8 channel with 4 nozzles, Disc gluing unit link with re-pumping device, electronic Overtaking fold with servos, feeder with vacuum, primary crusher left, Kickers, counters, digital position indicators, pressing device after folding, motorized threading station, Jagenberg DBS 01 control, Fully automatic format setting Jagset II, corrugated cardboard package , 3 x alignment with the press belt, pneumatic, clocked press belt. Press belt extension, video surveillance tray, cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running, by arrangement.

It has a cylinder for 10 to 135 T and a small additional cylinder for 1500 kg to 7 T. Empty run with 2-10mm second Pressing speed 2 mm second Table size 1100x650x120mm 800 mm maximum open height Table height max. 900 mm Travel of the cylinder is 400 mm Total height 2900 mm Weight 2.3 T 200 L tank Pump with 60 L output 5 KW main motor Control system PLC SIEMENS or PILZ RSS4000- S 7 1200 Safety control PILZ Communication Operator/Press Coloured Touch Screen 10" OMRON/SIEMENS

DEMO MACHINE We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Polar Cutting Machine D 56 ECO - Cutting width: 560mm - Insertion depth: 560mm - Insert height: max. 80mm - Pressing pressure: min. 200 daN; max. 1,200 daN - Saddle speed, return (0 - ...): 70mm / second - Residual cut, automatic, without cover plate: 15mm - Residual cut, automatic, with cover plate 50mm: 50mm - Voltage: 400V/50Hz/3~ - Dimensions (W × D × H): 1,150×1,670×1,500mm On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

DEMO MACHINE We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Polar Cutting Machine D 56 ECO - Cutting width: 560mm - Insertion depth: 560mm - Insert height: max. 80mm - Pressing pressure: min. 200 daN; max. 1,200 daN - Saddle speed, return (0 - ...): 70mm / second - Residual cut, automatic, without cover plate: 15mm - Residual cut, automatic, with cover plate 50mm: 50mm - Voltage: 400V/50Hz/3~ - Dimensions (W × D × H): 1,150×1,670×1,500mm On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

pressure: 60 t stroke: 380 mm tank capacity: 51 l pressing speed: 2,07 mm/sec column daylight: 750 mm feed speeds: 8,69 mm/sec return speed: 10,79 mm/sec Pressure power: 259 bar engine output: 1,5 kW speeds:: 2 : 170 mm weight of the machine ca.: 540 kg dimensions of the machine ca.: 2120 x 695 x 1315 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TEST MACHINE We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Polar High Speed Cutter N 176 PRO AT - Cutting width: 1,760mm - Insertion depth: 2,250mm - Insert height: max. 165mm - Safety pressurization: 50 daN - Pressing pressure: min. 150 daN; max. 7,000daN - Saddle speed, return (0 - ...): 1,600mm / second - Knife speed: 45 cycles/min - Residual cut, automatic, without cover plate: 35mm - Residual cut, automatic, with cover plate: 120mm - Voltage: 400V/50Hz/3~ On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

REF-371 FRATELLI INDELICATO ROTOFINISHER Fruit finisher (pulper and refining machine with adjustable pressing) Manufacturer: Fratelli Indelicato Model: Rotofinisher Applications: Designed to reduce the pulp content in citrus and tropical fruit juice Composed of two sieving bodies Power: 3kW Sieve dimensions: diameter-350mm, length-800mm Overall dimensions: l-1,600mm, w-1,300mm, h-1,700mm

pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 mm working width: 1040 mm pressing speed: 4,0 mm/sec feed speeds: 8,0 mm/sec return speed: 10,0 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,7 x 0,7 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Working length: 4080 mm Stand width: 3680 mm Pressing force: 320 to CNC control: DELEM DA controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke : 365 mm Projection: 410 mm Installation height: 535 mm Table width: 200 mm Working height: 1050 mm Hdr. Tool clamping at the top pneumatic die displacement CNC-controlled crowning 1 CNC-controlled bending aid CE marking Motor power: 37 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 24,5 tons The seller is not liable for typing or data transmission errors. The machine is age-appropriate in appearance, technology and wear; used machines are sold without any warranty.

pressure: 30 t stroke: 200 mm table surface area: 775 x 190 mm working width: 775 mm pressing speed: 5,0 mm/sec feed speeds: 7,5 mm/sec return speed: 10,0 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 0,7 x 1,8 m - hydraulic workshop press - table height adjustment - V-block tool insert - pressure display manometer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes

Machine is in very good condition Plate dimensions : 1150 mm x 2250 mm Total pressing force : 60 Ton Piston diameter : 70 mm

Manitowoc Multiplex MB-8-1PP Slush Machine Ice Cream Machine Manitowoc Multiplex MB-8-1 Beaker Mixing Workstation Properties: Mix and serve directly in the cup. Improve consistency, control product costs, reduce waste, labor, and serving time. Automated features to complete the entire beverage preparation process – right in the cup! Built-in Nugget Ice Cream Maker The built-in Nugget ice cream maker is the perfect ice cream for all kinds of specialty beverages, ensuring high beverage capacity during peak hours. The ice maker covers a large ice demand within 24 hours. Built-in cooling for storage and dispensing system Exclusive easyToUCH™ control Easy-to-use, icon-based touchscreen controls simplify beverage preparation and inventory management. The control panel provides visual training, cleaning, maintenance, and data collection information. With the icon-based easyToUC ...

offer 22499 Specifications: -.max. Working length 3100 mm - Stand passage 2600 mm -.max. Pressing force 100 t - Projection 400 mm - stroke 100 mm -.max. Installation height 370 mm - Table height approx. 960 mm - Delivery speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 11 kW - Space requirement approx. W 3500 x H 2300 x D 1950 mm - Weight approx. 8.0 t - with: - 3 axis CNC control CYBELEC - - CNC – Backgauge 0 - 600 mm - split sharpening tool - split V matrices - Support arms

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...

Special offer: 6 col 1200 mm Flexotecnica flexopress, special price for quick sale can be shown in operation unwinder rewinder print repeat 300 up to 1200 mm! unwinder diam. 1000 rewinder diam 900 BUT CAN BE EASILY ADAPTED to 1000 mm ( by moving / changing place of the current actuator of the pressing shaft or by changing the actuator for a different one.-information from the printer) electrical drying priinting rolls: 300-6pcs,320-6pcs,340-6pcs,360-pcs,380-6szt, 400-6pcs, 420 -2pcs,440-4pcs,460-6pcs,480-4pcs,500-6pcs,520-4pcs,540-4pcs,560-4pcs,5 80-4pcs,600-6pcs,620-4pcs,650-4pcs,680-pc,700-4pcs,720-4pcs,750-4pcs,8 00-4pcs,850-4pcs,900-2pcs,950-2pcs,1000-2pcs,1050-2,1150-2pcs,1200-2pc s Machine offered subject to unsold Machine offered subject to unsold wide offer of high quality used machines for attractive prices we also buy for stock / warehouses in EU over 20 years o ...

- German production - DTR, CE - year of manufacture 2010 - high efficiency up to 200 elements / min - 28 km / 8h TECHNICAL PARAMETERS: Wood parameters - width 60 - 225 mm - thickness 18 - 48 mm - length 300 - 2000 mm - pressing length 8100 - 16400 mm - power consumption 150 kW - air consumption 3100 Nl/min - suction capacity 14845 m3/h - two milling stations - undercutters - connecting to the line and zyzgka - loading with a conveyor with spacers - package width 600 mm - split ironing length Dimensions of the folding machine - length 42000 mm - width 6000 mm - height 2100 mm

Format range: 480 mm min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, electronic gluing unit HHS, 4 channel with 2 application heads, pane under-gluing unit left, Bobst CUBE control, vibrator, primary crusher right and left, Kicker, counter, minimal folding device, pneumatic, clocked Pressing tape. Overhaul 2023: cleaned, tested, new investor and Transport belts.

Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point gluing, electronic gluing unit HHS X-tend² 8 channel with 6 application heads, Quality Assurance System HHS X-tend², BJ. 2014 with code reader, Bottom Glue Control, Nozzle Glue Control & Linear Ejectors, Belt crusher on the right, disc gluing unit on the left, electronic overhaul with servos, feeders with vacuum, Primary crusher left, kickers, counters, digital position indicators, Pressing device after folding, motorized threading station, Jagenberg DBS 01 Control, Video Surveillance Storage, pneumatic, clocked press belt. Overhaul 2024: cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running by arrangement.

Specifications Maximum pressure: 82 tons Year of construction: 2012 Pressing force: 97 tons/m² Number of bindings: 5 - fold vertical Trunking cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Weight: approx. 25 tons Power supply: 400 V/ 55 kW Bale binding: automatic Press capacity at idle: max 576 m³ / hour Press capacity under operating conditions: max 267 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9 tons/hour Theoretical throughput to density 60 kg/m3: approx. 14 tons/hour Theoretical throughput to density 100 kg/m3: approx. 21 tons/hour

Pile cutting machine, stack cutter, face cutter SCHNEIDER type Senator 155 Rubber, paper and veneer shears Masch. No. 60178 Year of construction 1968 Cutting length 1550 mm Cutting thickness approx. 125 mm Application height 140 mm Backgauge max. 1550 mm Motor power Knife drive 5.5 kW Mains connection 380 volts, 50 Hz - 2-hand operation for stroke triggering - automatic pressing by hold-down presses the stack of paper onto the table - Kickback (backgauge) with digital dimension selection and sequence cut adjustment via control - Backgauge adjustment via servo motor (motor and control has been retrofitted) Space requirement L x W x H 300 x 270 x 165 cm Weight 5100 kg good condition Ideal for cutting paper, cardboard, leather, cork, rubber or fabric reinforced rubber; used

Rotary indexing machine Special machine with several assembly stations Hydraulic press + spot welding machine + much more Production and assembly system in rotary transfer process for front panel AC-DC connection plates rotary indexing machine manufacturer: AKE-technologies GmbH Serial number: 01-45-064 Number of mandate: 11111 Year of construction: 2012 - large rotary indexing table - pressing station with TOX power pack - 2 welding stations for resistance welding - several vibation conveyors - conveyor belts - testing station space requirement L x W x H approx. 3500 x 2750 x 2300 mm net weight approx. 4000 kg; used

Pneumatic press, air press BOSCH Type 0840 002 002 Fabr. No. 041 Year of construction 1980 Compressive force 18 KN = 1.8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 bar outreach 100 mm ram stroke 70 mm Table surface 245 x 200 Ram surface 45 mm Installation height max. 235 mm Clamping pin bore 20 mm with clamping screw Compressed air requirement 5 bar - Pressing force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger height adjustable by 90 mm- pneumatic 2-hand operation - mounted on metal base with wooden plates Space requirement L x W x H 1050 x 700 x 1600 mm Weight pneumatic press 82 kg Weight with table base 140 kg good condition; used

-Hobbing press -Make: Sack & Kiesselbach -Type: 500 Mp -Mach.No: 30407 -Capacity: 500 tons -Width between uprights : 420 -Daylight: 370 -Stroke: 340 -Clamping surface : Ø 500 -Closing speed: 100 mm/s -Pressing speed : 1.8 mm/s -Opening speed: 200 mm/s -Power -Dimension: -Weight 3.25 + .330 -L x W x H: 2.245 x 1.8 x 1.17

Pressing force: 8 t Table surface: 450x260 mm Stroke: 250 mm Projection: 175 mm Lifting speed: 3.9 m/min Retraction force: 4,000 kg Engine: 4 hp Weight approx. 1 t

THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...

Stock number: 3754 HYDRAULIC PRESS Manufacturer: STENHOJ, Type: 25T TE Machine NO.: 54718, Year of construction: 1988 Specifications: Table size 620 x 380 mm Stroke length 300 mm pressing force 25 ton Weight: 1600 kg

BRIQUETTING WOOD CHIPS AND GENERATING ADDITIONAL REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way – without the use of binders. Through the process of briquetting, you achieve higher revenues and at the same time reduce transport and storage costs. Our robust wood briquetting presses of the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquett ...

Baler Paal Pacomat II with hopper, year of construction 1979 Specifications: Manufacturer: Paal Type: Pacomat II Year of construction: 1979 Drive power: 11 kW Pressing force: 27 t Trunking cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: ca. 5200 kg

automatic baler Manufacturer: PAAL Type: PACOMAT III 50 C Operating hours: approx. 1,750 hours Year of construction: 2014 Specifications: Press force: 485 kN (50 t) Specific pressing force: 6.4 kg/cm² System pressure: 315 bar only free kicks Drive power: 22 kW Total connected load: 92 kW, 175 A Throughput at idle: approx. 285 m³/h Throughput under operating conditions: approx. 125 m³/h Output at 35 kg/m³: approx. 4.4 t/h Capacity at 50 kg/m³: approx. 6.0 t/h Filling opening: 1,200 x 920 mm Duct format: 750 x 1,000 mm (H x W) Oil tank volume: 1,250 ltr. Control: Siemens S7-300 Machine dimensions: approx. 8,000 x 2,000 (4,100) x 2,460 mm (L x W x H) Machine weight: up to approx. 12 t

immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T control - WILA upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion matrices - 2 front support arms movable on linear guide - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 months warranty - Commissioning, training

Vertical baler HSM VL 500.2, year 2008 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2008 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Standard Configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 19 tool stations,2 clamps ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning with preselectable pressing force ? Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 good parts containers ? Laser unit: CO2 laser TLF2700, radio-frequency excited, insulated against vibrations, integrated in machine frame, incl. chiller, and laser control DIAS 3 ? High speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Punch stroke / thread counter ? Laser cutting head: 5? lens, quick-change device, height regulation APC ? Additional laser cutting head with 7.5? lens ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools,  ...

For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx.  ...

For sale we offer a strapping machine model TW01 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Transport Rollers Specifications: Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm max. (with side straps) 460 mm min. 160 mm Height: max. (without press) 500 mm max. (with press) 400 mm min. 30 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. 450 mm Width: 165-210 mm Electrics 230 V, 1 phase, 50 Hz Power consumption 1,1 kW at 230V Pneumatics Operating  ...

Specification type S120/S260 Working width 20-120mm/20-260mm Working thickness 12-50mm/12-80mm Max. cutting size 80x50mm/180x80mm/150x100mm Width of work table 330mm/330mm Min. ingoing length 400mm/400mm Feeding table width 80m/min/80m/min Number of main feeding wheels 5/5 Saw blade 405mm/455mm/455mm/510mm Saw spindle speed 3500r/min/3500r/min Saw blade motor power 5.5kw/5.5kw Saw blade speed (up-down) 2-4 times/1sec./2-4 times/1sec. Lifting motor power 3kw/3kw Feeding motor power 3kw/3kw Pressing wheel motor power 0.18kw/0.18kw Total power 12.43KW/12.43KW Air Tolerance 1000NL/min/1000NL/min Air Pressure 0.6mpa/0.6mpa Diameter of dust extraction Ф140mm/x2/К140mm/x2 Extraction speed 30m/s/30m/s Weight 1000/1000 KG Dimensions 6500x1400x1800mm/6500x1400x1800mm Price: 31000/32500 € (EXW Jonava, Lithuania)

Capacity: 100 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: BC 55 Graphical Max. bending length:        3100mm Distance between column:    2550mm Max. pressing force:        100T Dis. Beam - Table:          400mm Beam stroke:                200mm Troth beam:                 250mm Approch speed:              100mm/min. Working speed:              10mm/min. Return speed:               100mm/min. Adjustment X-Axis back gauge:1000mm Control:                    BC 55 Graphics Crowning:                  & ...

Capacity: 40 t Folding length: 1000 mm CNC Brand: Delem Max. bending length:        1000mm Distance between column:    800mm Max. pressing force:        40T Beam stroke:                100mm Table Width:                90mm Troth beam:                 250mm Approch speed:              110mm/min. Working speed:              11mm/min. Return speed:               105mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  4 Power:                      4,8kW Length:                  ...

fully automatic baler Manufacturer: BAUER Type: 500 Year of construction: 1993 specifications: Press force: 50 t Specific pressing force: 6.68 kg/cm² Channel format: 680 x 1,100 mm Bale weight: 450 - 550 kg, depending on material and bale length Filling opening: 1,600 x 1,020 mm Filling volume: 1.66 m³ Drive power: 2 x 22 kW Throughput: - Idle approx. 450 m³/h - under operating conditions approx. 200 m³/h Press services at: - 20 to 30 kg/m³ bulk density approx. 4 to 6 t/h - 35 to 50 kg/m³ bulk density approx. 7 to 10 t/h - 60 kg/m³ bulk density approx. 12 t/h - 100 kg/m³ bulk density approx. 18 t/h Machine weight: approx. 21 t Optionally with chain conveyor belt according to pictures. Subject to accuracy of technical data.

Capacity: 300 t Folding length: 4300 mm CNC Brand: Delem CNC Model: Delem DA65 Max. bending length:        4300mm Distance between column:    3700mm Max. pressing force:        300T Dis. Beam - Table:          485mm Beam stroke:                300mm Table Width:                250mm Troth beam:                 400mm Approch speed:              80mm/min. Working speed:              10mm/min. Return speed:               80mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  5 Crowning:                  &n ...

Hydraulic press brake Manufacturer: MENGELE Type: A 100-2 Pressing pressure: 100t Stroke: 160mm electr. Connection: 400V 3Ph Year of construction: 1964 Condition: used and functional