presses line used for sale

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 S Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 t Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1991 Operating hours: 13.296 h Condition: Not tested, Disassembled from a working factory

Vertical baler HSM VL 500.2, year 2008 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2008 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.

Manufacturer: AP&T Lagan Type: FMC-2500 MC12 1010 Table size: lower: 1000 x 1000 mm; upper: 800 x 800 mm (sender table: 1000 x 800 mm) Clearance: 1000 x 700 mm Stroke: 500 mm Press force: 2500 kN - 250 ton Voltage: 400 V Electric power: 45 kW Hydraulic oil capacity: ~1.000 l Weight: ~11.000 Kg Manufacturing year: 1992 Operating hours: 19.470 h

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 30 to Total stroke: ca 300 mm Execution: 4 columns Table surface: Length: 530 mm Width: 380 mm Passage between supports: longitudinal: 550 mm Voltage 50 Hz 3x: 380 Volt Motor output: 7.5 HP Machine´s weight about: 2700 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 3200 mm

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Total stroke: 200 mm Execution: 1 support Table surface: Length: 290 mm Width: 230 mm Slide pressure: 4000 kg Distance from table to slide-nose: min.: 0 mm max: 250 mm Depth of throat: 118 mm Voltage 50 Hz 3x: 380 Volt Total power required: 3 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 900 mm Width: 700 mm Height: 1800 mm

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Shearing force: 20 / 300 kN Total stroke: 100 / 70 mm Power stroke: 22 / 6 mm Execution: 2 supports Slide diameter: 30 / 63 mm Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 bar Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2400 mm Various accessories: Déclanchement à deux mains

HL 450 ton 4 column press

HL 450 ton 4 column press

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Shearing force: 20 / 300 kN Total stroke: 100 / 70 mm Power stroke: 22 / 6 mm Execution: 2 supports Slide diameter: 30 / 63 mm Voltage 50 Hz 3x: 380 Volt Compressed air from: 6 bar Machine´s weight about: 1900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2400 mm Various accessories: Déclanchement à deux mains

HL 1000 ton 4 column press

HL 1000 ton 4 column press

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 4220 Technical data Pressure: 6.3 to Total stroke: 400 mm Mounting height max.: 500 mm Execution: 1 support Table surface: Length: 500 mm Width: 300 mm T-channel width: 14 mm Voltage 50 Hz 3x: 380 Volt Motor output: 7.5 HP Machine´s weight about: 900 kg Overall dimensions machine: Length: 1300 mm Width: 900 mm Height: 2200 mm Various accessories: Déclanchement à deux mains

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1400 mm Table width: 250 mm Shearing force: 400 kN Ram feed: 1.8 m/min Total stroke: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 7.5 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1345 mm Width: 720 mm Height: 2450 mm

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 400 to Stroke: (stepless) from: 12 s/min up to: 40 s/min Table surface: Length: 2500 mm Width: 1500 mm Slide adjustment: 100 mm Slide stroke: 300 mm Fixed stroke: 300 mm Slide surface: Length: 2500 mm Width: 1500 mm Distance table to slide nose: max: 800 mm Passage between the supports: longitudinal: 3240 mm Lateral: 1600 mm Air connect: 5.5 bar Total installed power: 40 kW Machine´s weight about: 70000 kg Overall dimensions machine: Length: 4300 mm Width: 2500 mm Height: 7000 mm

fully automatic baler Manufacturer: BAUER Type: 500 Year of construction: 1993 specifications: Press force: 50 t Specific pressing force: 6.68 kg/cm² Channel format: 680 x 1,100 mm Bale weight: 450 - 550 kg, depending on material and bale length Filling opening: 1,600 x 1,020 mm Filling volume: 1.66 m³ Drive power: 2 x 22 kW Throughput: - Idle approx. 450 m³/h - under operating conditions approx. 200 m³/h Press services at: - 20 to 30 kg/m³ bulk density approx. 4 to 6 t/h - 35 to 50 kg/m³ bulk density approx. 7 to 10 t/h - 60 kg/m³ bulk density approx. 12 t/h - 100 kg/m³ bulk density approx. 18 t/h Machine weight: approx. 21 t Optionally with chain conveyor belt according to pictures. Subject to accuracy of technical data.

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Execution: number of columns: 2 Machine frame: fixed Circulary table diameter: 220 mm diameter: 80 mm Number of strokes: from: 50 s/min up to: 150 s/min Adjustment of the slide: 40 mm Fixed stroke: 27 mm Tool height: 148 mm Distance between columns: front: 230 mm Voltage 50 Hz 3x: 400 Volt Power: 0.75 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Security/savety device Lamp Sound insulation cabin

Capacity: 0 t Operating hours: 32165 Technical data Pressure: 25 to Max. Bending length: 1250 mm Passage between press bars: 320 mm Distance between the: 1020 Max. stroke: 100 mm Depth of throat: 200 mm Feed rate: 75 mm/s Working speed: 10 mm/s Return stroke speed: 80 m/min Table length: 1200 mm Table width: 60 mm Table height: 865 mm Number of spacers: 6 pce Height of the spacers: 120 mm Number of cylinder: 1 pce Oil capacity: 30 l Voltage 50 Hz 3x: 400 Volt Motor power: 4 kW Machine´s weight about: 1600 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 2000 mm

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Control: Allen Bradley Technical data Pressure: 315 to Fixed table: length: 1780 mm Width: 1300 mm Hole in table: length: 1780 mm Width: 290 mm Number of strokes: stepless from: 8 s/min up to: 40 s/min Fixed stroke: 280 mm Power: 58 kW Machine´s weight about: 65000 kg Overall dimensions machine: Length: 3300 mm Width: 2500 mm Height: 5390 mm Table height: 1000 mm

Key data: 100 t

Technical data PDM100R-5393 Power [tm] 100 DIMENSIONS OF THE BOTTOM PLATE [mm] 900x600 DIMENSIONS OF THE UPPER PLATE [mm] 850x550 GUIDE COLUMNS (x4) [Ø mm] 50 WORKING HEIGHT [mm] 950 MAX. APERTURE [mm] 600 STROKE [mm] 420 FREEWHEEL SPEED [mm/s] 50-230 WORKING SPEED [mm/s] 2-15 WEIGHT [kg] 3000 SERVO POWER – PDM100R The new SERVO hydraulic units from Bosch Rexroth are designed to increase productivity and reduce energy consumption by up to 80% at a standstill, tool change and between the cycles. Increased efficiency in operation! EQUIPMENT - Proportional p/Q control with SvP5020 from Bosch Rexroth - Adjustable speed values on PLC. - AOPD photoelectric sensor technology - LCD display 12" - Configurable working parameters on PLC. - 50 pre-saved programs available on PLC. - Pre-filled valves for fast speeds - Maintenance-free bronze graphite bushings. - Simpl ...

Capacity: 0 t Stroke: 0 mm Distance column/center (Throat): 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1000 (12 Atü) kg Execution: 1 support Table surface: Length: 120 mm Width: 110 mm Max. distance from table to slide: 110 mm Depth of throat: 65 mm Machine´s weight about: 20 kg Overall dimensions machine: Length: 400 mm Width: 150 mm Height: 600 mm Various accessories: Micrometer stop

Capacity: 0 t Stroke: 0 mm Distance column/center (Throat): 0 mm Technical data Length of stroke: 205 mm Depth of throat: 120 mm Spindle diameter: 32 mm Die pressure:: 700 kg Table: Diameter: 105 mm Surface on floor: Length: 245 mm Width: 100 mm Machine´s weight about: 13 kg

automatic baler Manufacturer: PRESONA Type: LP 65 VH 2 Year of construction: 2012 specifications: Press force: 65 t Specific pressing force: 7.87 kg/cm² Drive power: 45 kW Throughput: 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 425-575 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 26 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2012 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 5,000 mm Climbing length: approx. 10,500 mm according to attached pictures

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 600 to Total stroke: 0 - 305 mm Table surface: Length: 3070 mm Width: 1530 mm Distance from table to max: 950 mm Passage between supports: Lateral: 1220 mm Slide clamping surface: Width: 3070 mm depth: 1530 mm Close traverse speeds: Rapid traverse: 296 mm/s Press stroke: 10 mm/s Return traverse speeds: 380 mm/s Motor power: 150 kW Overall dimensions machine: Length: 4250 mm Width: 2100 mm Height: (5700+900) mm

Capacity: 0 t Control: Cybelec S-DNC-8879-PS Technical data Pressure: 800 kN Total working length: 2050 mm Distance between the standards: 2050 mm Standard depth of throat: 255 mm Slide stroke, working stroke: from: 215 mm Mounting height max.: 390 mm Working speed: Press stroke: 8 mm/s up: 60 mm/s Voltage 50 Hz 3x: 380 Volt Motor power: 5.5 kW Machine´s weight about: 6700 kg Overall dimensions machine: Length: 3700 mm Width: 2000 mm Height: 3400 mm Various accessories: Set of bending tools Set of retaining clamps Motorized stop: 500 mm

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Execution: number of columns: 2 Machine frame: fixed Fixed table: length: 210 mm Width: 210 mm diameter: 80 mm Number of strokes: from: 50 s/min up to: 150 s/min Adjustment of the slide: 40 mm Fixed stroke: 27 mm Tool height: 148 mm Distance between columns: front: 230 mm Voltage 50 Hz 3x: 380 Volt Power: 0.75 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 700 mm Width: 600 mm Height: 1400 mm

automatic baler Manufacturer: PRESONA Type: LP 65 VH2 Year of construction: 2007 specifications: Press force: 65 t Specific pressing force: 7.27 kg/cm² max. oil pressure: 265 bar Press force pre-press: 25 t Drive power: 45 kW Throughput: approx. 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 420-570 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 21 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2007 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 6,000 mm Climbing length: approx. 10,500 mm according to attached pictures Subject to errors in the technical data.

Maximum pressure: 130 tons Pressing force: 107.5 tons/m² Channel cross-section: 1100 x 1100 mm Bale weight: approx. 700-1000 kg Power supply: 400 V/ 2 x 55 kW Year of construction: 1992 Number of bindings: 5 - fold vertical Dimensions of the tailgate: 1020 x 2000 mm Weight: approx. 40 tons Bale binding: automatic Press capacity at idle: max 720 m³ / hour Press capacity under operating conditions: max 450 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 15.5 tons/hour Theoretical throughput to density 60 kg/m3: approx. 26 tons/hour Theoretical throughput to density 100 kg/m3: approx. 40 tons/hour We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Maximum pressure: 9 tons Pressing force: 1.94 kg/cm² Bale size: 770x600x500 mm Bale weight: - Power supply: 400 V/4 kW Year of construction: 1997 Productivity: - Price: on request

Maximum pressure: 14 tons Pressing force: 2.92 kg/cm² Bale size: 800x600(600-1000) mm Bale weight: approx. 100 - 200 kg Power supply: 380V/7.5kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Maximum pressure: 16 tons Pressing force: 2.54 kg/cm² Bale size: 1100x700x900 mm Power supply: 400 V/ 4 kW Year of construction: - Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Maximum pressure: 50 tons Pressing force: 5.2 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 7.5 kW Year of construction: 2000-2001 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1999, 2000 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Fully European, professional workshop electric press with a pressure of 100t. Made of the highest quality steel, it ensures maximum precision of work during manual or automatic operation. The press has two speeds of operation - the piston at idle (without load) descends very quickly to the workpiece - while when a load is detected, the pump automatically switches to the working mode - slower and precise. Equipped with an adjustable work table and an electric pump. Precision is ensured by a robust hydraulic system and perfectly balanced, robust components. Viber-System workshop electric presses are a must-have in every professional workshop that appreciates precise and fast work. Model Specification WP100HPRK: Model: WP100HPRK Press force: 100 tons Max. pressure 320 bar Piston stroke: 400mm Oil tank capacity: 27l No-load speed (idle): 16mm/sec Piston return speed: ...

Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1998 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

Maximum pressure: 16 tons Pressing force: 2.08 kg/cm² Bale size: 1100x700x950 mm Bale weight: approx. 150-250 kg Power supply: 400V / 4kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Compressive force: 170 t Spindle Ø: 160 mm Table support surface: 700 x 900 mm Plunger area: 500 x 800 mm Gr. Distance between table and plunger: 450 mm Drive motor: 380 V, 11 kW Weight: 8200 kg

Maximum pressure: 5 tons Pressing force: 2.17 kg/cm² Bale size: 590 x 390 x 485 mm Bale weight: approx. 25 - 35 kg Power supply: 400V / 2.2 kW Year of construction: 2003 Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Used screw compressor / screw press Manufacturer: H&G Type: DWF V11 Year of construction: 04.00 Specifications: Weight: approx. 1,800 kg Speed: 10 1/min. Operating voltage: 3/N/PE AC 400 V Frequency: 50 Hz Rated current: 22.5 A

Replacement Screw for H&G Screw Compressors

Year: 2021 (brand new machine, immediately available) - stable cast iron construction - hydro-pneumatic controls - adjustable position of the heads - lowered thrust unit (30 mm hoof) - profile supports - scissors stroke: 10.5 mm - working stroke of the clamp: 80 mm - crimping height: 120 mm - crimping point: 30-60 mm

automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 584 specifications: Pressing force: 7 t Drive power: 11 kW Fuse: 35 A Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t Machine dimensions: approx. 4,600 x 2,000 x 2,015 mm (L x W x H)

Briquette press with extraction system Make Mütek Type MPP60 Year of construction 2011 Briquette mould cylindrical Diameter 50 mm Depending on the material, capacity up to 60 kg/h Drive motor 5.5 kW Volume of chip hopper approx. 0.7 m³ Weight of the press 680 kg Dimensions briquette press 1680 mm x 1100 mm x 1500 mm Height with container 2050 mm Including extraction system 33 filters, filter length 1300 mm, diameter 200 mm Extraction system filter area 27 m² Capacity 2,970 m³/h Fan motor power 5.5 kW Intake diameter 300 mm Overall dimensions with extraction system and fan 4300 mm x 1150 mm x height 3700 mm Almost all shredded materials can be briquetted with a residual moisture content between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, mal ...

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2013 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side

Veneer Press Gluing Press Plate Press Heat Press OTT Type: JU 65 YOC 1977 Press dimensions : 120 x 225 cm incl. heating plates The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these may differ. Please inquire in advance for more detailed cond ...

Killian NRD 39 Tablet press 39 punching stations, 96,000 - 260,000 tablets/h, currently set for 17mm diameter tablets, with box of other toolings and manual

Press type: PME 315 T Drive system: Eccentric Type of used tools Progressive Nominal force: 3150 kN Rating above BDC mm Material flow L->R - Maximum SPM: 75 1/min Minimum SPM: 20 1/min Maximum shut height: 525 mm Minimal shut heigh:t 325 mm Slide adjustment: 130 mm Maximum slide stroke: 210 mm Minimum slide stroke: 40 mm Bolster specification Bolster dimension: 2220 x 1225 mm T-slots in bolster: T28 H8 DIN650 - Draw cushion N/A - Draw cushion stroke: N/A mm Draw cushion force: N/A kN Draw cushon dimension: N/A mm Maximum weight: kg Ram specification Ram dimension: 2220 x 1225 mm T-slots in ram: T28 H8 DIN650 - Max. upper die weight: 3600 kg Tool manipulation Tool is manipulated by forklift - Max. tool weight: 5500 kg Forks size/pitch: 150x60/940 mm Lower die clamp height: 50 mm Upper die clamp height: 50 mm Tool locating (centering) stůl/bolster  ...

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

Press force: 130T Stroke: 350 mm 4 axis Weight:8860 kg