presses line used for sale

Dough part and actuator, Bread press Model: 4-30 NEW mature technology ... the original! Knife with simple cleaning position! Dough divider semi-automatic with 3 actuating plates Dough ring coated with easy click Sub range 40 to 120 grams/piece Division 30 in part Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH NEW Machine with 2 years warranty

Press force: 300 t Stroke length: 200 mm Stroke speed: 20-60 1/min Shut height: 680 mm Ram adjustment: 200 mm Overall size: 2600x2000x4200 mm

Overall Size: 1400x1300x2300 mm Work space: 200x200x150 mm

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Overall size: 900x900x1800 mm Stroke length: 80 mm Weight: 702 kg The machine used for electric motor coal/carbon brush pressin

Catalog No. 6853 TECHNICAL DATA - hydraulic clamping force - round briquette form - briquette diameter 65mm - dimensions of the tank height / width 770x940mm - sensor of the minimum level of trout in the hopper - automatic or manual operation of the machine - inspection window in the machine chute - pump motor 7.5 kW - agitator motor 0.35 kW - 2 types of screw speed 1100, 1700 rpm - screw motor 0.75 kW - dimensions length/width/height 2050x1650x1640mm - weight 895 kg ADVANTAGES – unpainted – German production – used briquetting machine - very good condition Net price: PLN 31900 Net price: 6860 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

spare parts - cook bolinders - Hydraulic cylinder PRESSING Hydraulic cylinder pressEN

Ortlinghaus coupling outer diameter 680 mm from stock as good as new

Crank press ZAMECH PKRR 400A built in 1974. Technical data : - pressure: 400 tons - clearance between stands: 1020 mm - ram stroke: 315 mm - number of strokes per minute: 20 - maximum distance of the slider from the table closed: 742.5 mm - slider adjustment: 250 mm - table dimensions: 1020 x 1050 mm - main engine power: 40 kW - main engine revolutions: 1500 1 / min. - weight of the press: 40 t

Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t

Catalog No. 6853 TECHNICAL DATA - hydraulic clamping force - round briquette form - briquette diameter 65mm - dimensions of the tank height / width 770x940mm - sensor of the minimum level of trout in the hopper - automatic or manual operation of the machine - inspection window in the machine chute - pump motor 7.5 kW - agitator motor 0.35 kW - 2 types of screw speed 1100, 1700 rpm - screw motor 0.75 kW - dimensions length/width/height 2050x1650x1640mm - weight 895 kg ADVANTAGES – unpainted – German production – used briquetting machine - very good condition Net price: PLN 31900 Net price: 6860 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

No. 4105: 1 gebr. Hydraulic riypress Fabr. G + K, type SI 40/50, Bauj. 2000 Accessories: Table 500 x 400 mm Other: Pressure force max. 600 kN Impact stroke 150 mm Weight approx. 4500 kg

automatic baler Manufacturer: UNOTECH Type: UPAMAT 100V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Rated current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32.000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large digit displ ...

CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...

Gluing stand VHS with motor hydraulics for gluing all frame constructions with dowel connection – tine connection – 45° miter connection. The motor-hydraulic gluing stands VHS are available in the following sizes: Maximum grouting range 2,500 x 1,800 mm 2,500 x 2,100 mm 3,000 x 1,800 mm 3,000 x 2,100 mm 3,500 x 2,100 mm Three vertical press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each. Two horizontal press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each (optionally, the gluing stands can of course be supplied with more press cylinders). Drive power 0.75 to 1.25 kW.

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 5000 kg

Bookpress / twin plates / Hydraulic Splek Model IIB Year 1975 Size 280 x 440 mm Stack height 600 mm Pressure 3 tons Available Direct

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine APC K 200-50 pharmapactor with Flake Crusher AFC 300. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Specially built for pha ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Pharmapaktor APC L200/50. The Hosokawa Alpine APC L200/50 Pharmapaktor is the perfect compactor to test the product behaviour with this technology, while it even allows to keep a continuous production at small scale if needed. The Pharmapaktor can be fitted with a flake crusher to granulate the resulting compacted material increasing the possibilities of end produc ...

2886: 1 gebr. Difiting press 200 kN Fabr. REIS, type TUS 60 OK 20, Bauj. 1991 with hydr. Control Arb.-Ber.: Stroke approx. 700 mm, drive power: 7.5 kW Accessories: extendable table 670 x 570 mm, swing-out top plate 670 x 570 mm, Mounting height 740 mm Other: Passage between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 tons. very good condition

No. 3421: 1 gebr. Tool press Fabr. SCHÖN, type SH-PZ 250, Bauj. 1979 Arb.-Ber.: Pressure power 250 to mm, drive power: .22 kW Accessories: Table 500 x 500 Other: Single stroke 2-hand Single stroke foot switch automatic continuous running set up and tap

Filter press plate filter ultrafiltration plate filter used Manufacturer: Rhone Poulenc Type: UFP 70 Max working pressure: 4.5 bar/64 psi Torque: 8 mxkg 6x24 plates approx. 2000 x 600 H 1700 mm Changes and errors in the technical data, Information and prices as well as intermediate sale reserved.

STANDARD-EQUIPPED

Plate press Filter press Chamber filter press Industrial wastewater technology -used- Manufacturer: FAZZINI Type: F500 Operating pressure 15 bar Plate size 500 x 500 mm 20 plates with hydraulic unit 1.5 kW and piston pump 0.75 kW Dimensions: approx. 2400 x 750 x 1600 mm All items are checked for function before delivery, if technically possible !

Table top height: 910 mm Table top size: 700 x 380 mm Max drilling depth: 145 mm Max long hole length: 240 mm Height adjustment distance 135 mm Engine power: 1.5 kW Voltage: 400 V / 50 Hz Speed: 3,000 rpm Net weight: approx. 200 kg Suction nozzle: 100 mm Dm Dowel drilling device: Pitch 16, 22, 25, 32 mm with precision grid roller Driving equipment: Yes Frame stop 90°: pluggable Two-jaw chuck: up to 20 mm clamping range Hand eccentric tensioner: 1 piece 1 Lever control: Yes Measuring clock in handwheel: Yes Miter stop: Yes, double angle adjustment stop from 22.5° to 75° infinitely adjustable

2 column hydraulic press #5232 Press force: 200 t upper stroke: 500 mm lower stroke: 200 mm overall dimension: 1800x2200x3700 mm Power: 10 PS Weight: 8.4 t

ZTS KOSICE LEK 160 eccentric press was built in 1985 in Czechoslovakia. The press, operating with a force of 160 tonnes and a slider making up to 50 strokes per minute, is designed for, e.g. punching, cutting and pressing of workpieces. Machining is performed on a large work table with a length of 1000 mm and a width of 740 mm, with full illumination in the form of a lamp mounted on the body of the KOSICE LEK 160 machine. The total weight of the machine is 12180 kg. Technical data of the ZTS KOSICE LEK 160 press - maximum press force: 160 t (1600 kN) - work space dimensions (L x W): 1000 x 740 mm - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 32/min - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider adjustment range: 100 mm - reach: 355 mm - workspace illumination - weight of the KOSICE LEK-160 machine: 12180 kg

N° 0214: 1 gebr. Hydraulic quick-stroke two-stand press Fabr. SMG, Type DS 63, Bauj. 1984 with pressing force 630 kN, retraction force 51 kN Arb.-Ber.: Table area 660 x 460 mm, drive power: 15 kW Accessories: The press was upgraded to UVV 11.064 VBG 7n5.2 in 1991. Other: Light width between the stands 680 mm, max. distance between table top and pestle 385 mm, ejector force 15 kN largest pestle stroke 150 mm.

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width with additi ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width wit ...

Machine cleaned by a specialist & functionally tested Properties: + Partial knife made of stainless steel + even division of the dough + excellent rounding of the dough pieces + ergonomic knife cleaning position (head can be swiveled to the side) + easy and quick adjustment of the effective chamber height STANDARD equipment: + 3 knitting plates included Technical data, according to manufacturer's specifications: Quantity: 30 pieces of dough Unit weight: 30 - 93 grams (depending on dough / product) Dough insert: 900 - 2,800 grams (depending on dough / product) Power: 0.55 kW Powers: 400V - 3Ph - 50Hz Fuse: 16A-CEE plug Dimensions: 63 x 59 x 134 cm (WxDxH) Working height: 81 cm Height with lever: 202 cm Net weight: 250 kg

No. 4877: 1 gebr. Single-stand hydraulic press Fabr. EITEL, Type T 6.3, Bauj. 1973

No. 4929: 1 gebr. Eccentric press 22 - 26 to Fabr. EBU, type 25, with stroke number 130 min-1 Arb.-Ber.: Stroke adjustment 80 mm,

Machine Mechanics & electrics completely overhauled & repainted by an expert 6 months warranty Properties: + Stationary machine, very robust & stable construction + Machine is set in motion by switch-on lever, one-hand operation + with effective cut-off + Cleaning position to the rear with hand crank + even division of the dough, excellent rounding of the dough pieces + Partial knife / cutter head has been overhauled / recoated + Machine was completely disassembled, mechanically & electrically overhauled, repainted + Transmission parts run constantly in an oil bath + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested with dough by master baker Standard equipment: + incl. 3x knitting plate, new Special equipment, available at extra cost: + Chassis for Fortuna Automat ...

Roll press / dough dividing and warp knitting machine / Klievmaschine Machine Mechanics completely overhauled & repainted by the expert New installation of the entire electrical system, according to the latest standards 6 months warranty Properties: + Stationary machine, very robust & stable construction + Machine is set in motion by switch-on lever, one-hand operation + Cleaning position electric, to the rear, with switch + even division of the dough, excellent rounding of the dough pieces + equipped with active cut-off, for square dough pieces + Partial knife / cutter head has been overhauled / recoated + completely disassembled, mechanically overhauled, repainted + New installation of the entire electrical system, according to the latest standards + Transmission parts run constantly in an oil bath + complete overhaul in Babenhausen, according to German quality stand ...

Completely overhauled HSB 15 incl. certified oil pan and protective fence for a quick and Trouble-free commissioning. Overhauled in 2021 Optional new 8m3 bunker and conveyor screw available. Including. Used machine warranty

High Speed Precision Press Maker Obata (Japan) Year of manufacturing - 1981 Capacity 10 t Stroke length 22 mm Speed 100-400 stroke/min price 6000 EUR

Corpus press (used) Press for assembly of hulls (b/u) Good quality In good condition Pressurized area of the 800x570 mm Pneumatic cylinders: Number of pneumatic cylinders: 4 Step between stating hole: Distance between fixing holes: 50 mm Compressed air pressure Compressed Air 8 bar Transport dimensions Transport Sizes 1950x600x1150mm Weigh Weight 350Kg

Collier sleeves Fishbone CPM 16-2.5

Graf Kollerhülsen Geriffelt to CPM Pelletpress

Graf Koller sleeves punched for CPM 16-2.5 Pelletier press

Collier sleeve Fishbone CPM 22-2.5 for pellet press

Koller sleeves Geriffelt for CPM 22-2.5

Koller sleeves punched for CPM 22-2.5

Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland

ZM press Max ram adjustment: 400 mm Passage between uprights: 800 mm Max distance between table - ram: 500 mm