presses line used for sale

TABLET PRESS MANESTY BETAPRESS N° of stations: 16 Operating pressure: Max. 6.1/2 Diameter of punches: 19 mm Length of upper punch: 133.6 mm Length of lower punch: 133.6 mm Max. mechanical speed: 90.000 Height of machine: 160 mm Floor space occupied: 584 mm x 851 mm Approx. weight of machine: 695 Kilos

Capacity: 200 t Stroke: 900 mm Distance column/center (Throat): 680 mm Table length: 1450 mm Table width: 850 mm Eccentric press SANGIACOMO - T 200 FPR 7055 = Mach4metal Capacity Kg:  200000 Table Length: 1450mm Table Width:  850mm Hole in table:240mm Working height:960mm Ram size:     900 x 680mm Throat:       435mm Stroke:       19 - 230mm Ram adjustment:110mm Strokes:      45Min. Length:       2360mm Width:        1780mm Height:       3865mm Weight:       19000kg

Wehmoner Membrane Press

Working Sizes: 1300 x 3500 mm

Working Sizes: 1300 x 3500 mm

Pellet mill for ring DIE and two roll shell system. Inside diameter: 900 mm Active operating width: 138mm Active forming area: 3902 cm² Press roll Ø440/142 optionally dimpled or notched Front door Stainless steel front door with large opening angle. pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Drive via 355 kW-1200 rpm engine , timing belt Ø200/1900 - Beltdrive Motor and Motor cables not included. Equipment Central lubrication for roll assembly and main shaft Manual roll adjustment Overload protection provided by a safety pin Die of chrome steel X46 Cr13 with conical seat for an easy change of the die - Die is not included Adjustable defle ...

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000

Press which can be used for manufacturing seals / (resin) composite parts / compression molding / circular sawblades / abrasive products / pressing from (metal)powder to parts / ... with heated table max 220 - 240° Cnbsp; Press has been developed to be able to remain under pressure for 24 hours! Capacity: 100 ton Passage between uprights: 530 mm Max ram adjustment: 200 mm Distance between table -- ram: 250 mm Table area: 502 x 502 mm Ram area: 530 x 500 mm Length: 1600 mm Depth: 1200 mm Height: 2300 mm Weight: 2 ton Compression press / Grinding wheel press / Vulcanizing press / Elastomer press Kompressionspresse / Schleifscheiben Presse / Vulkanisierpresse / Elastomer Presse

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

Bread rolls Stüpfler stainless steel 380 volts -30 in part

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Refurbished Hosokawa Alpine compactor CS 25. The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industr ...

TECHNICAL DATA: Working width mm: 3000 Working height mm: 1800 Downholders: 5

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Electro.-Pneum. Hot stamping press Gierlich PE600 with round table, 6 stations manufacturer: Gierlich type: PE600 mach.-nr.: 05437 year of construction: ? comm.-nr.: 0101/100/230/0431 stock-nr.: 1864 + Regular Price: 4.850,- € > Reduced Price: 2.425,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) pressure: 600 kg, adjustable height adjustment: 210 mm stamping table size: 300 x 110 mm temperature up to: 400° C, adjustable air pressure up to: 10 bar, adjustable time setting for lifting/lowering: 0 – 6 Sec./Min. voltage: 220 V / 50 Hz weight: ca. 350 kg standing area: W 950 x D 1005 x H 1600 mm  ...

Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may vary

Freshly revised Koller to CPM Press 3022 or 7022 Punched, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available

Freshly Revised Koller to CPM Press 3022 or 7022 , Fshbone, 2 new bearings, new sleeve, new intermediate ring, filled with grease. rest used. Koller are no longer needed due to machine changes. 3 pieces Available

Table size 2700x1600 mm Number of Table 2

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

Pressure force 30 t, with feeder, see pictures

Ricy press with foot release

Foot pendulum press

Heating bed length 3m Wood types FI, AI, LÄ, DG, ZI L-lamella width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target power/shift: 1500 average. Up to 2000 m2 / SCHICHT 1273 - 2073 mm 1500 average. Up to 2000 m2 / S

various dosing pumps, see pictures

C-frame Stand-up Press WMW Power: 3 tone Mounting height: 355 mm Stroke: 280 mm Stumbling speed: 0.1 m/sec. Machine Weight: 400 kg Country of origin Germany

TECHNICAL DATA: Working width mm: 3000 Working height mm: 1700 Downholders: 4

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

Hercules metal press Machine Package size: 20 x 35 x material quantity Drive: 7.5 KW Weight: 2100 kg

Glue stand hydraulic, double-sided Format L x W: 3000 x 2000 mm L x W x H: 3200 x 2200 x 1100 mm Weight approx. 600 kg Built in 2003 Pressure per cylinder 2500 kg 8 clamping elements 2 Holders The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

very fast Eccentric press, make SCHULER , tested , electrically connected Type PDv 25/200 Masch.-No. 70/32.0610/9 Technical data: Power 25 to Number of strokes approx. 180 /min Extension 200 mm Impact stroke 8 - 80 mm Shock sift creation approx. 60 mm Table size approx. 570 x 410 mm Installation height approx. 310 mm (measured with mounted clamping plate) Width x Depth approx. 1.1 x 1.35 m plus control cabinet Height approx. 2.15 m Engine power 3 kW Weight estimated approx. 1.5 to

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

SINO NCP 160 eccentric press built in China in 2018 by Sino Machinery & Tools (Dongguan) Co., LTD. performs machining of metal workpieces with a press force of 160 tonnes. The machine is equipped with high-quality components, including e.g. a 100 mm adjustable slider making up to 25 to 55 strokes per minute, and a YU JAIV PDH-120 indicator displaying the distance of the die between the table and the slider. The large working area, ease of operation and outstanding precision, guarantee excellent machining results. The press offers the possibility of combining it with an automatic feeding system in order to increase the number of parts produced and significantly reduce costs. The total weight of the machine is 13 tonnes. Technical data of the SINO NCP 160 press - maximum press force: 160 t - work area dimensions (L x W x H): 910 x 600 x 410 mm - bolster dimensions (L x W x H): 125 ...

1 MONTI ANTONIO continuous belt press for knitted fabric ironing/finishing, with steaming upper plate type 205

Manesty Drycota 900 23 Station Double Headed Tablet Press with Type D Tooling • This Double Headed Tablet Press is Mounted on a Common Chassis Plate and Driven via Line Shaft by a Common Drive • Twin Single Compression • Turrets Are Each Fitted With 23 Type D Stations • Upper Keyed Tooling • Removed Side Attached Operation Control Panel N°. of Stations: 23 Voltage: 400 VOLTS Frequency: 50 HERTZ Phase: 3

Rotary tablet press SPT- TP500D with double-sided press; Brvyulnw 2 layered production; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 500D Number of stations (Max.) D=41 B=49 BB=59 1 Max tablet ejection (two-sided) T/h 270 000 360 000 420 000 Max tablet ejection 2 layer T/h 90 000 115 000 140 000 2 Max.Tab.Diameter Round mm 13 16 25 Form 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 6 Dimensions mm 1150 x 1550 x 1950

Rotation tablet press SPT-TP 400 with high production capacity; Touch screen, PLC Control Panel; HMI (Human Macshine Interface); SPT-TP 400 Number of stations (Max.) D=30 B=36 BB=45 1 Max tablet ejection/hour T/h 125000 170 000 215 000 2 Max.Tab.Diameter Round mm 13 16 25 Mould mm 14 19 25 3 Max tablet thickness mm 8.5 4 Max main pressing force t 10 5 Max pre-press force t 2 Hqgonxsno 6 Dimensions mm 1000 x 1230 x 2000

automatic baler Manufacturer: UNOTECH Type: UPAMAT 60 V 5 Year of construction: 2016 Operating hours: approx. 11,500 specifications: Cutting force: 60 t Filling opening 1,400 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Drive power: 37 kW Rated power 70 kW Rated current consumption: 123 A Pump: Axial piston pump Machine weight: 23.500 kg Output: approx. 260 m²/hour under operating conditions Throughput: at 20 - 30 kg/m³ bulk density approx. 7.8 t/h at 30 - 50 kg/m³ bulk density approx. 12.0 t/h at 60 kg/m³ bulk density approx. 15 t Equipped with: Wirbulator 11 kW Press box planked with HARDOX central lubrication point Large digit display Conveyor belt control Free kick 1,300 litre oil tank including chain conveyor Manufacturer: PAAL Type: KEM 1400 Feed length: 6,810 mm Climbing length: 9,000 m ...

The small rotary tablet press SPT-TPL 200 (small scale production); Touch screen, PLC control platform; HMI system; Bczkcapdbh The machines comply with the requirements of the GMP guidelines and are CE certified; Number of stations (Max.) D=13 B=16 BB=19 1 Max tablet ejection/hour T/h 46 000 57 000 68 000 2 Max.Tab.Diameter Round mm 25 16 13 Shape mm 25 19 14 3 Max tablet thickness mm 8.5 4 Max main pressing force t 5 5 Max pre-press force t 1 6 Dimensions mm 600 x 1106 x 1705

Stainless steel pedestal for bread presses / dough-sharing machines suitable for all common bread presses massive construction resilient with 1 to easy lifting with the lift truck Stainless steel for optimal cleaning Dimensions: 735 x 640 x 170 mm, WxDxH Visit our large bakery machinery warehouse!

Baler Presto CC 20 M, year of construction 2016, pressing force 20 t Specifications: Manufacturer: Presto Type: CC 20 M Year of construction: 2016 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Binding: 3-fold Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2,3 t 100 kg/m³ - 2,8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: ca. 2500 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment takes place ex works, without guarantee and guarantee.

Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden  ...

(analogue of KB8344) Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

Order No. 6761 TECHNICAL DATA 6 hydraulic cylinders: - 4 upper - 2 side - max. length of glued elements 3100mm - max height of glued elements 1600mm - pump motor power 1.5kW - dimensions length / width / height 4320x1500x1120mm - weight kg ADVANTAGES - unpainted - possibility of gluing in vertical and horizontal position - used press - very good condition PRODUCT FEATURES The press is designed for assembly of all rectangular frame structures, e.g. doors, windows of various dimensions. An additional hydraulic cylinder is responsible for the possibility of gluing in the vertical and horizontal position. Net price: PLN 18 900 Net price: EUR 4021 Net price, calculated at the rate of 4.70 PLN / EUR (with greater fluctuations in the rate, the price may change)

Veneer press Leopida Format: 2300 x 1000 mm Plates with hot water heating L x W x H: 2300 x 1100 x 2000 mm Weight approx. 2000 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

Dear customers, currently we offer a polystyrene press incl. shredder for sale. It is a new machine that has 0 operating hours! Here are a few more technical details: Material to be processed: EPS moulded parts and chips Maximum material density that can be processed: 18 kg/m³ Loading opening: 700 x 360 mm Filling height 1,402 mm Achievable compaction: up to 250 Kg/m³ System throughput: up to 15 kg/h Block dimensions: 130 x 130 mm Power supply: 3x400 VAC+N+PE 50 Hz Connected load: 1.5 KW, 400V 50Hz incl. automatic press pressure regulation with pellet holder Finish: RAL 7035 (light grey) combined with RAL 2011 (deep orange) Incl. water dosing system for direct screw cooling up to 10 litres/h with water shut-off valve. Price plus VAT, which will be shown separately on the invoice. Transport possible worldwide for an extra charge! If you have any questions, please d ...