presse brake used for sale

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

Pressing force: 2000kN, working length: 7200mm, connected load: 15kW, max. oil temperature: 45°C, max. operating pressure: 200bar, max. material thickness S235: 8mm, max. stroke: 215mm, max. closing speed: 200mm/s, pressing speed range: 1mm/s-10mm/s, stop time: 90ms, safety distance: 290mm, weight: approx. 38000kg. Including underfloor equipment and Fiessler AKAS 160 S safety system, year of manufacture: 2013. Documentation available. An on-site inspection is possible.

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

2 pieces of brake plates LA322482200, suitable for Fendt / Massey Ferguson / Laverda

LA322147950, brake disc suitable for Fendt / Laverda / Massey Ferguson, price per piece

A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible.

An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.

pressure: 160 t chamfer lenght: 3000 mm distance between columns: 2650 mm Control: Cybelec DNC 800 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible.

This 6-axis Warcom LOGICA 1250-60 press brake was manufactured in 2023. Consider the opportunity to buy this Warcom LOGICA 1250-60 press brake. Contact us for more information.

This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information.

This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine.

This Beyeler PR6 Bending machine was manufactured in the year 1997. It is equipped with a DNC 800 control unit. The machine has a pressing force of 1000 kN and a bending length of 3100 mm.

This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine.

This AMADA HFBO 50 20 press brake was manufactured in 1996. It features a maximum pressing force of 500kN and a stroke up to 200mm. Operating on 400V 50Hz with a power requirement of 6kW, it weighs 4500kg. Consider the opportunity to buy this AMADA HFBO 50 20 press brake. Contact us for more information.

This Metallkraft GBP 31175 press brake was manufactured in 2022. It features a CNC-controlled DELEM DA-58T controller for precise bending sequence calculations and programming. The machine boasts a pressing force of 175 tons and a bending speed of 10 mm/s, with a motor power of 18.5 kW. It includes Italian-made tooling and Fiessler safety lasers for enhanced operation safety. Contact us for more information about this machine.

This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information.

This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine.

This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4 color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine.

Manufacturer: Safan Model: CNCL 110-3100 Type of Machine : Press Brake Find more here - / Contact us at -

This IMAC FL 80-2500 press brake was manufactured in 2009. It features a maximum force of 800 kN and a table width of 2500 mm. The distance between uprights is 1990 mm, and it has a throat depth of 280 mm. With a motor power of 7.5 kW and a weight of 5200 kg, consider the opportunity to buy this IMAC FL 80-2500 press brake. Contact us for more information.

This Durma AD-S 30135 press brake was manufactured in 2006. It features a ModEva 10S control unit and has accumulated 39,801 working hours. With a bending length of 3050mm and a tonnage capacity of 135t, its designed for robust performance. Consider the opportunity to buy this Durma AD-S 30135 press brake. Contact us for more information.

This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a press force of 500 kN and a bending length of 1275 mm. Equipped with a stable machine frame, electro-hydraulic upper drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending operations. Contact us for more information about this machine.

This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. Worlds first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine.

This 4-axis Vimercati PHSI 100x3050 press brake was manufactured in 2005. It features a working width of 3050 mm, motor power of 9 kW, and a pressing force of 100 tons. The machine dimensions are 3500 x 2000 x 2700 mm, and it weighs 9700 kg. It includes a fully refurbished Cybelec control system. Consider the opportunity to buy this Vimercati PHSI 100x3050 press brake. Contact us for more information about this machine.

This BLEMAS EURO 160 press brake was manufactured in 1993. It features a press force of 160t and a bending length of 3m. The stand passage is approximately 2.5m, and it is equipped with a Cybelec control system. The machine is ready for immediate use, with cylinders that have been re-honed and sealed. Contact us for more information about this machine.

This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine.

This HILALSAN Advanced Cap 3320 was manufactured in 2019. It features a pressing force of 320 tons, a bending length of 3100 mm, and a stroke of 365 mm. With a throat depth of 510 mm and a main motor power of 30 kW, its ideal for heavy-duty press brake tasks. Only 351 operating hours. Contact us for more information.

This 3-axis ADIRA QHD-2512 PLC press brake was manufactured in 2009. It features a Cybelec DNC 60 control unit, a pressing force of 245 kN, and a bending length of 1330 mm. The distance between columns is 1250 mm, and it operates at a working speed of 8 mm/s. If you are looking to get high-quality bending capabilities, consider the ADIRA QHD-2512 PLC machine we have for sale. Contact us for more information about this machine.

LVD PPNMZ 1200 ton x 12 meter CNC Capacity: 1200 ton x 12 meter Backgauge: CNC Passage between uprights: 5050 mm Max stroke: 300 mm Max distance between table -- ram: 600 mm Depth of throat: 350 mm Table width: 300 mm Locking speed: 80 mm/sec Working speed: 7 mm/sec Returning speed: 46 mm/sec Electric motor (power): 44 kW

8 assen: Y1 / Y2 / X1 / X2 / R1 / R2 / Z1 / Z2 4 plaatsteunen aan de voorkant laserveilige beveiliging Willa gereedschap Capacity: 220 ton x 6100 mm Backgauge: CNC Control: Cadman-B Touch Passage between uprights: 5050 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 21 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Weight: 24 ton

12 assen: Y1 / Y2 / X1 / X2 / X3 / R1 / R2 / R3 / Z1 / Z2 / Z3 / V 5 plaatsteunen aan de voorkant Willa hydraulische gereedschapsadapter 3 achteraanslageenheden Achteraanslagbereik: 1250 mm Capacity: 400 ton x 7100 mm Backgauge: CNC Control: Cadman Passage between uprights: 6050 mm Max stroke: 300 mm Max distance between table -- ram: 550 mm Depth of throat: 300 mm Table width: 250 mm Locking speed: 90 mm/sec Working speed: 9,5 mm/sec Returning speed: 65 mm/sec Electric motor (power): 37kW Weight: 38 ton

Trumpf TrumaBend V230 8 assen: Y1 / Y2 / X / R / Z1 / Z2 / V / W bovenste en onderste Willa hydraulische gereedschappen met Trumpf ACB-optie; hoekmeetsysteem 3 beweegbare plaatsteunen aan de voorzijde veel gereedschappen inbegrepen Capacity: 230 ton x 3100 mm Backgauge: CNC Control: Delem Passage between uprights: 2690 mm Max stroke: 365 mm Max distance between table -- ram: 535 mm Depth of throat: 410 mm Table width: 200 mm Locking speed: 200 mm/sec Working speed: 1 > 10 mm/sec Returning speed: 135 mm/sec Electric motor (power): 30 kW Length: 3660 mm Depth: 2120 mm Height: 3095 mm Weight: 17,7 ton

met handmatige kroon Capacity: 135 ton x 3100 mm Backgauge: electric Passage between uprights: 2600 mm Max stroke: 120 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 70 mm/sec Working speed: 7 mm/sec Returning speed: 60 mm/sec Electric motor (power): 10 hp Length: 3270 mm Depth: 1550 mm Height: 2240 mm Weight: 2,4 ton

This 5s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details.

This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine.

This Hesse AD-S 30175 press brake was manufactured in 2017. It features a robust 3050 x 175 TON capacity, a stroke of 265 mm, and operates on a supply voltage of 3 x 400 Volt. Weighing 10830 kg, it ensures stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the Hesse AD-S 30175 machine we have for sale. Contact us for more information.

Press brake manufactured in 1999. This AMADA HFB 5020 features a maximum pressing force of 500 kN and a maximum stroke of 200 mm. With a robust machine weight of 4700 kg, it is designed for durability and efficiency. If you are looking to get high-quality pressing capabilities, consider the AMADA HFB 5020 machine we have for sale. Contact us for further details.

Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine.

7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835 Capacity: 130 ton x 4100 mm Backgauge: CNC Control: AMNC-PC Touch Passage between uprights: 3760 mm Max ...

Press brake manufactured in 2019. This FEYSAMA MCCH 6/3050 features a press force of 135 tons and a bending length of 3200 mm. It includes a programmable stroke of 160 mm and a backgauge with a stroke of 800 mm. If you are looking to get high-quality bending capabilities, consider the FEYSAMA MCCH 6/3050 press brake we have for sale. Contact us for further details.

A repair-required CNC press brake Amada is available. Press force: 1000kN, max. stroke: 200mm, working width: 3100mm, passage: 2690mm, throat depth: 400mm. Machine dimensions X/Y/Z: approx. 3600mm/2100mm/2600mm, weight: approx. 6500kg, operating hours: approx. 37661h. The cylinder control has a defect. Documentation available. An on-site inspection is possible.

Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

Hydraulic press brake 120x3100

This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details.

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

3 assen: Y1 / Y2 / X Handmatige bombeertafel De achterkant van de machine is gesloten. Capacity: 175 ton x 3600 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.