presse brake used for sale

Key data: 4 t

C-frame press for clinch technology Pressing force 4.8 tons. Air pressure 6 bar, 32 mm total stroke 3 mm power stroke, no tools available

pressure: 100 t stroke: 220 mm daylight between the columns: 1190 mm dayligth: 700 mm : 190 mm diameter of piston: 120 mm table surface area: 1600 x 800 mm weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,9 x 1,4 x 2,0 m Side-adjustable cylinder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread Press Fortuna Automatic A 3 H + Effective shutdown for product diversity! Head cleaning to the back Partial head reworked with stainless steel knife NEW Connection 400V, 16A-CEE plug Used machine overhauled Quality from a specialist company! Benefit from over 35 years of experience!

Roll Press Record Semi-Automatic Parting head NEWLY revised Stainless Steel Knife NEW with 3 knitting plates only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled & SAB tested with warranty + spare parts service

Roll Press Fortuna Semi-Automatic Size 4 Semi-automatic 30-piece Parting head NEWLY revised Connection 400V, 16A-CEE plug Used machine overhauled Quality from a specialist company! Benefit from over 35 years of experience!

Power (ton) 400 Type link drive Table dimensions ( x-y/mm) 2500 x 1200 Slide Dimensions X-Y (mm) 2645 x 1200 Stroke (mm) 300 Slide Adjustment (mm) 150 Light at T.D.C.(mm) 900 Shut Height (mm) 600 Strokes type adjustable Stroke per minute 17-50 Lateral window dimensions ( x-y/mm) 1020 Motor Power (kw) 30 Features 2 link drive Accessories feeding line tecnomatic

Key data: 1 t

Hydraulic Fine Press, MATRA, , up to 1000kg, Table: 260x200mm, Radius 110, Foot or manual release, fine adjustment without UVV, pressure and stroke! Fully functional, can be visited under power

Offer 26015 Technical data: - Max. pressing force approx. 160 t - Max. ram stroke approx. 300 mm - Double-acting cylinder with hydraulic return - Max. retraction force 110 T - Stand width approx. 1540 mm - Table width 1500 mm - Table depth 1000 mm - Table height 590 mm - Max. installation height approx. 850 mm - Drive 400 V / 11 kW - Space requirement with unit approx. W 2350 x H 2200 x D 1750 mm - Weight approx. 3500 kg

Offer 25272 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 0 - 2.4 m/min - Return 0 - 12 m/min - Installation height 800 mm - Projection to the middle of the ram 360 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 8.75 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2000 kg

Offer 25274 Hydraulic – single-column press with drawing cushion Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 450 mm/sec - Installation height 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - Drawing cushion 10 t - E. footswitch - 2 hand control panel - Drive 400 V / 12.5 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2400 kg

Offer 25275 Technical data: - Max. pressing force 25 t - Max. ram stroke 500 mm - Lifting speed 200 mm/sec - Return 450 mm/sec - Installation height 800 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 440 x 360 mm - Plunger clamping pin 40 mm - Table size 630 x 500 mm - Table bore / breakthrough 180 mm - E. footswitch - 2 hand control panel - Drive 400 V / 12.5 kW - Space requirement approx. W 800 x H 2750 x D 1150 mm - Weight approx. 2200 kg

Key data: 125 t

Single-column press – manufacturer Durendus – 125 t servo press – table 2200 × 750 mm For sale is a hydraulic C-frame servo press from the manufacturer Durendus with an adjustable press force of up to 125 t and an integrated 50 t ejector. Thanks to modern servo hydraulics, the machine offers significantly reduced energy consumption of up to 40% compared to conventional systems and is ideal for demanding assembly, forming and production processes. = Technical data + information: Hydraulic servo press – C-frame – 125 t General information - Manufacturer: Durendus - Model: Single column press / servo press - Type: C-frame press Laobqcjx Aqtqotxvoa - Press force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm Table &  ...

Inner diameter: 220 mm Inner belt width: 200 mm Year of construction 02/90 Load capacity per reel is 150 kg, whereby the reel must be screwed to the ground. Weight approx. 450 kg Incl. wiring diagram Auction-ID: A1-45977-9

Key data: 20 t

DURENDUS 20 T Workshop Press – Single Column Press – 600 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 3.120 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a basic functional design – in practice, in most cases it is expanded with additional equipment and configured accordingly on a project-specific basis. Table top with X-shaped T-slot (from 60 t) Pressure adjustment Lateral displacement of the press ...

TECHNICAL DATA: Electro-hydraulic frame press Working dimensions: 6300 x 1300 x 200 mm 18 vertical press beams Compressive force of vertical press beams: 7200 kg 06 Front press beam Installed power: 5.5 kW

Key data: 80 t

DURENDUS 80 T Workshop Press – Single Column Press – 900 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: € 4,990 net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. X-shaped T-slot table top 600 × 900 × 30 mm Pressure adjustment Lateral displacement of the press pisto ...

Key data: 30 t

DURENDUS 30 T Workshop Press – Single Column Press – 700 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 3.550 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a basic functional design – in practice, in most cases it is expanded with additional equipment and configured accordingly on a project-specific basis. Table top with X-shaped T-slot (from 60 t) Pressure adjustment Lateral displacement of the press pi ...

Key data: 60 t

DURENDUS 60 T Workshop Press – Single Column Press – 900 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 4.550 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a basic functional design – in practice, in most cases it is expanded with additional equipment and configured accordingly on a project-specific basis. X-shaped T-slot table top 600 × 900 × 30 mm Pressure adjustment Lateral displacement of the press ...

Key data: 100 t

DURENDUS 100 T Workshop Press – Single Column Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 5.990 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. X-shaped T-slot table top 650 × 900 × 90 mm Pressure adjustment Lateral displacement of the press pi ...

Key data: 150 t

DURENDUS 150 T Workshop Press – Single Column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply you with this machine from stock or manufacture it from scratch – gladly taking into account individual options. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 6.900 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral dis ...

R410A refrigerant Quantity 6.3 kg Power 14 kw DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-22

Without clamping devices and supports, only the press Technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-20D Year of Make: 1994 Machine Type: Hydraulic trimming press Press force: 200 kN Retraction force: 35 kN Max. stroke: 500 mm Installation height: 800 mm Speeds: Fast forward: 620 mm/s Pressing cycle: 90 mm/s Return: 540 mm/s Hydraulic pressure: max. 175 bar Fuel tank capacity: 355 l Pneumatics: min. 6 bar, connection R1/2\" Motor power: 7.5 kW Connected load: 8 kVA Control voltage: 24 V Clamping surface: Table: 800 x 600 mm Plunger: 800 x 500 mm Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration Vertical construction Suitable for die casting deburring processes Documentation available Used machine Auction-ID: A7-46048-28

Without clamping devices and technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-30 PLC Year of Make: 1993 Machine Type: Hydraulic trimming press Nominal force: 300 kN Retraction force: 42 kN Max. stroke: 500 mm Installation height: 800 mm Clamping area: 800 x 600 mm T-slots: 18 mm Motor power: 7.5 kW Connected load: 8 kVA Voltage: 380 / 660 V Frequency: 50 Hz Hydraulic pressure: up to 200 bar Hydraulic pump: E-A10VSO45DRL/30R-PPA12 Hydraulic Medium: HFC Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration PLC control Vertical stud design Suitable for die casting deburring processes Documentation available Condition used d Pads, only the press Auction-ID: A7-46048-27

Key data: 180 t

DURENDUS 180 T Workshop Press – Single Column Press – 1,400 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply you with this machine from stock or manufacture it from scratch – gladly taking into account individual options. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 8.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral dis ...

Key data: 200 t

DURENDUS 200 T Workshop Press – Single Column Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 10.750 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of the ...

Table dimensions ( x-y/mm) 5000 x 2500 Slide Dimensions X-Y (mm) 5000 x 2500 Stroke (mm) 1500 Light at T.D.C.(mm) 2000 Shut Height (mm) 500 Accessories shock absorber Cushion number 2 Cushion Area (x-y/mm) 4000 x 1800

Key data: 30 t

DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

Without clamping devices and technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-30 PLC Year of Make: 1993 Machine Type: Hydraulic trimming press Nominal force: 300 kN Retraction force: 42 kN Max. stroke: 500 mm Installation height: 800 mm Clamping area: 800 x 600 mm T-slots: 18 mm Motor power: 7.5 kW Connected load: 8 kVA Voltage: 380 / 660 V Frequency: 50 Hz Hydraulic pressure: up to 200 bar Hydraulic pump: E-A10VSO45DRL/30R-PPA12 Hydraulic Medium: HFC Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration PLC control Vertical stud design Suitable for die casting deburring processes Documentation available Condition used d Pads, only the press

Available hydraulic press brake with el. Stop adjustment Power: 380V, 4kW, 9A, 50Hz

It is a used WP bun press type Rotamat CN for sale. The machine is thoroughly cleaned and checked, it works perfectly. The Rotamat CN is suitable for dividing and rounding doughs with a wide variety of consistencies and recipes, e.g. classic roll doughs, mixed and special doughs, pretzel doughs, doughnuts, sweet doughs. The weight range is 30gr. - 70gr. If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates. Price: 1780,--€ ecxl.VAT from stock Straubenhardt (Germany)

Long fence model LZT-UK-20-So Lower piston press for pressing composite components. Max. press force 20 t Press table 1400 x 1000 mm Opening speed 65 mm/s Closing speed 65 mm/s Press speed 2 mm/s Shelf width 600 mm Max cylinder stroke 600 mm Hydraulics System pressure 300 bar Safety distance 404 mm Delay time 202 ms Max weight lower tool 500 kg. 2 pieces of refrigerators GWK teco cs 90.Very good condition immediately available.