129,010 used machines on RESALE, but how to find them? Machine Search
REIS TUS 115 OK 100 Die Spotting Press pressure 100 t table surface area 890 x 1280 mm ram surface 1000 x 1200 mm distance between columns 1250 mm stroke 1035 mm distance table/ram, max. stroke up, adjustment up 1035 mm side window 700 mm table height over floor 630 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11 t Dimensions (WxDxH): 2,1 x 3,8 x 3,9 m swiveling ram movable table table - tiltable ram interlocking hydraulic ejector in table
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
Hydropneumatic mode of operation Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg
Panel production plant, incl. mixing plant and finishing line Slab production line, including mixing and finisching line
Qty. 1 Second-hand 160 MN Horizontal Direct Single Action Extrusion Press Mfc.: SMS Force: 16 000 MT Built: 2015/2016 Billet dim.: Dia. 610/720 x 750 – 2500 mm Scope of supply: Induction Billet Furnace Extrusion Press Quenching System Puller Run-Out Table Stretcher Finishing Saw Profile Stacker Die Oven Billet Peeling Machine
Connected load 380V 3.5A Pneumatic connection 8 bar Total height 3600 mm Overall length 4400 mm 1x fixed stop 2x pressure beams - can be clamped over rack 2x pressure cylinder stroke 100 mm pneumatically clampable 1x manual control for transverse and longitudinal pressure and loosening presses 1x medium pressure beam 600 mm height (working area) 1x additional longitudinal pressure cylinder 1x slanted window pressing device
Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg
HYDRASAN 350 T hydraulic press was built in 2007. There are 2 such machines available for sale. A price included in the offer applies to one machine. Technical specifications of the HYDRASAN 350 T press - maximum press force: 350 t - lower work table surface area (L x W): 1300 x 420 mm - movable table stroke: 300 mm - distance between tables: 400 mm - approach speed: 4.8 mm/s - return speed: 5.1 mm/s - piston diameter (cylinder internal diameter): 230 mm - directional control valve: REXROTH 4WE 10 G33/CG24N9K4 - pump flow rate: 40 l/min - oil tank capacity: 120 l - hydraulic oil gauge: PAKKENS - working pressure: 230 bar - manostat: REXROTH HED 80A 20/350 - electric motor power: 5.5/11 kW - electric motor rotational speed: 1450 rpm - power supply: 380 V; 50 Hz - dimensions of the HYDRASAN machine (L x H): 1800 x 2200 mm
TIGER Single Bar Hydraulic Clamp AU Model: - Working dimensions 3000x1700mm - with pressure regulator pressure gauge - manual cycle, or automatic with timer - with safety photocells Machine not CE compliant, for export
Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg
Specifications Maximum pressure: 45 tons Year of Make: 2017 Pressing force: 6.9 kg/cm² Number of bindings: 3 Channel cross-section: 900 × 720 × 600 - 1200 mm Dimensions of the tailgate: 820 × 1250 mm Bale weight: 250 - 400 kg Weight: approx. 7 t Power connection: 400 V Bale tying: automatic Theoretical throughput 174 m3/hour Theoretical throughput to density 20 kg/m - 3.48 tons/hour Theoretical flow rate to density 50 kg/m - 8.7 tons/hour If you have any questions, please call us: +48 696 072 985
We sell our PPK baler. the main pump and auxiliary pump were replaced this year 2024. Invoices are available. The press only pressed cardboard boxes. It can be demonstrated and put into operation at any time.
Inv. Num. : 8131 Type: HPD-S 63 Producer: Hydrap Created: 1997 Parameters: Compressive force: 63 t Stroke: 1000 mm Maximum lifting speed: 410 mm/s Machine height: 2200 mm Machine length: 1200 mm Machine width: 500 mm Machine weight: 13000 kg
pressure: 200 t stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 2.000 x 1.200 x 2.800 mm Control: Producer: HIDROLIKSAN YOM: new Type: HD 160 Thrust: 160 ton. Stroke: 400 mm Throat depth: 480 mm Total power requirement: 5,5 kW Distance between frames: 1.200 mm Cylinder-Ø: 120 mm Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm Weight: 1.400 kg Additional information: • solid, welded construction • pressure cylinder lateral adjustable • operating electrical per switch lever / • pressure indication per Manometer • material support per cylinder, adjustable in height • CE-mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Manufacturer: HAULICK+ROOS - Model : MD 260 SL - Length (mm): 0 – 260 - Material Width (mm): 10 – 260 - Material Thickness (mm): 3 - Band Speed (m/min): 60 - Band Cross-Section (mm): 800 - Year of Manufacture: 1983 The 1983 HAULICK+ROOS MD 260 SL is a mechanical double-column press manufactured by Haulick + Roos, a German company specializing in precision stamping and forming machines. This model is designed for high-speed production and is commonly used in industries requiring precise metal forming, such as automotive and electronics manufacturing. Key Specifications: - Press Force: 260 tons - Stroke Length: Variable, accommodating different production needs - Table Size: Approximately 1,250 mm x 1,000 mm - Slide Adjustment: Motorized, allowing for precise control over the slide position - Drive System: Eccentric or crank mechanism, typical for mechanical presses of this type ...
Manufacturer: Joos Model: HP-S 360 Condition: used Machine Hours : 15.321 h Type of Machine: Press Find more here - / Contact us at -
Gluing star with heating plates. Connection 30 KW. Four pressing surfaces. Hydraulic, pneumatic. Further dates will follow.
Manesty B3A tablet press. Condition - used machine. Technical parameters: 16 stations, pressure 6 tons. 1500 W motor. User manual available.
Plate length 4000 mm, plate width 2700 mm, 480 T printing, Plate opening 100 mm, one tier, heating plates with thermal oil, 15 KW
Used tablet press Manesty, model B3A. 16 stations, capacity up to 700 tablets/min., pressure 6 tons, 1.5 kW motor.
Used screw press made by Italian company Bertuzzi. New 2002. Press application: Citrus juice from the extractors can be pulped to meet customers' pulp content requirements. Helicoidal depulpers model ESM and Super have been designed specifically for refining citrus juice. They take the high-pulp juice from the extractors and gradually squeeze the pulp, producing a low-pulp juice.
Used Manesty tablet press model D4. Pressimng force -100 kN (10 tton). Capacity 60000 tablets per hour. Max filling depth -20,5 mm. Max tablet diameter – 25.4 mm.
Specifications Maximum pressure: 100 tons Year of Make: 1995 Pressing force: 82 tons/m² Number of ties: 5 in vertical Channel cross-section: 1100 x 1100 mm Dimensions of the tailgate: 2050 x 1100 mm Power connection: 400 V/ 2 x 55 kW Weight: approx. 36 tons Bale tying: automatic Press capacity under operating conditions: max 1170 m³ / hour Press capacity at idle: max 720 m³ / hour Theoretical throughput: to density 30kg/m³) 22 tons/hour Theoretical throughput: to density 50kg/m³) 28 tons/hour Theoretical throughput: to density 100kg/m³) 42 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably guided on large rollers ...
Specifications: - Max. working length 4060 mm - Column passage 3680 mm - Max. pressing force 1700 kN - Max. distance table / plunger 385 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported
Key data: 25 t, 500 mm
almost unused NEHER screw press with clamping table
Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace
Continuous veneer press panel size 3200/1400mm External and inner hydraulic cylinders Press pressure can be adjusted separately Panel heating steam and electricity
used
HL 60 ton Capacity: 60 ton Passage between uprights: 410 mm Distance between table -- ram: 670 mm
used
HL 60 ton Capacity: 60 ton Passage between uprights: 410 mm Distance between table -- ram: 670 mm
Weingarten AR 63 ton Capacity: 63 ton Max adjustable stroke: 8 > 100 mm Drawning speed: 56/84 str/min Dimension of the table: 620 x 500 mm Dia table hole: 250 mm Punchholder dia: 40 mm Course adjustment: 63 mm Weight: 4 ton
Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg
High-pressure pump for baler HSM 500.1 VL with 7.5 kW motor
baler hydraulic power pump HSM V-press 1160 Plus
1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm
Max pressure: 150 ton Table size: 620 x 600 mm Between columns: 620 mm Lower and upper table are heated Max temperature: 200° C Weight: 8 ton
Max pressure: 120 ton Table size: 450 x 500 mm Between columns: 450 mm Lower and upper table are heated Max temperature: 200° C
2 presses Max pressure: 50 ton Table size: 400 x 500 mm Between columns: 400 mm Lower and upper table are heated Max temperature: 200° C
2 presses Max pressure: 60 ton Table size: 350 x 350 mm Lower and upper table are heated Max temperature: 200° C
Max pressure: 250 ton Table size: 620 x 600 mm Between columns: 620 mm Max opening: 500 mm Lower and upper table are heated Max temperature: 200° C Height: 2600 mm Weight: 6 ton
2 presses Max pressure: 120 ton Table size press left: 450 x 450 mm Between columns: 450 mm Max open: 285 mm Table size press right: 480 x 500 mm Between columns: 480 mm Lower and upper table are heated Max temperature: 200° C Weight: 5 ton
Max pressure: 120 ton Table size: 500 x 500 mm Between columns: 500 mm Lower and upper table are heated Max temperature: 200° C Weight: 3 ton
Max pressure: 150 ton Table size: 500 x 500 mm Between columns: 500 mm Lower and upper table are heated Max temperature: 200° C Weight: 4,5 ton
Max pressure: 400 ton Table size: 1000 x 650 mm Between columns: 1000 mm Lower and upper table are heated Max temperature: 200° C Height: 2600 mm Weight: 9 ton Capacity: 400 ton
SPECIFICATIONS: Briquettes: Ø 60 mm Production: 70 kg/h Installed power: 7.5 kW EQUIPMENT: 1 mini silo
SPECIFICATIONS: Installed power: 9.2 kW Briquette size: Ø 70 mm Complete with 13 filter bags (Ø 160 x 550 mm)
Key data: 100 t, 3000 mm
Hydr. CNC Press Brake AMADA 3m, 100 ton without tools !
Pressing and joint-setting machine Book height : 100 - 520 mm Book width : 120 - 450 mm Book thickness : 6.5 - 100 mm Output : approx. 150 books/hour (depending on the material used)
FETTE Data Control 2 Installed in a mobile cabinet including an EPSON printer
maximum number of results exceeded
please refine your search
