presse brake 800 used for sale

Without clamping devices and supports, only the press Technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-20D Year of Make: 1994 Machine Type: Hydraulic trimming press Press force: 200 kN Retraction force: 35 kN Max. stroke: 500 mm Installation height: 800 mm Speeds: Fast forward: 620 mm/s Pressing cycle: 90 mm/s Return: 540 mm/s Hydraulic pressure: max. 175 bar Fuel tank capacity: 355 l Pneumatics: min. 6 bar, connection R1/2\" Motor power: 7.5 kW Connected load: 8 kVA Control voltage: 24 V Clamping surface: Table: 800 x 600 mm Plunger: 800 x 500 mm Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration Vertical construction Suitable for die casting deburring processes Documentation available Used machine Auction-ID: A7-46048-28

Without clamping devices and technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-30 PLC Year of Make: 1993 Machine Type: Hydraulic trimming press Nominal force: 300 kN Retraction force: 42 kN Max. stroke: 500 mm Installation height: 800 mm Clamping area: 800 x 600 mm T-slots: 18 mm Motor power: 7.5 kW Connected load: 8 kVA Voltage: 380 / 660 V Frequency: 50 Hz Hydraulic pressure: up to 200 bar Hydraulic pump: E-A10VSO45DRL/30R-PPA12 Hydraulic Medium: HFC Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration PLC control Vertical stud design Suitable for die casting deburring processes Documentation available Condition used d Pads, only the press Auction-ID: A7-46048-27

Key data: 180 t

DURENDUS 180 T Workshop Press – Single Column Press – 1,400 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply you with this machine from stock or manufacture it from scratch – gladly taking into account individual options. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 8.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral dis ...

Key data: 200 t

DURENDUS 200 T Workshop Press – Single Column Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 10.750 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of the ...

Key data: 30 t

DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...

Table dimensions ( x-y/mm) 5000 x 2500 Slide Dimensions X-Y (mm) 5000 x 2500 Stroke (mm) 1500 Light at T.D.C.(mm) 2000 Shut Height (mm) 500 Accessories shock absorber Cushion number 2 Cushion Area (x-y/mm) 4000 x 1800

It is a used WP bun press type Rotamat CN for sale. The machine is thoroughly cleaned and checked, it works perfectly. The Rotamat CN is suitable for dividing and rounding doughs with a wide variety of consistencies and recipes, e.g. classic roll doughs, mixed and special doughs, pretzel doughs, doughnuts, sweet doughs. The weight range is 30gr. - 70gr. If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates. Price: 1780,--€ ecxl.VAT from stock Straubenhardt (Germany)

Available hydraulic press brake with el. Stop adjustment Power: 380V, 4kW, 9A, 50Hz

Höfer Heating press for composite components Table size 1600 x 900 mm Press force 800 kN Temperature Heat max. 300 °C. Accessories 2 pieces of cooling units. Good condition available immediately.

Long fence model LZT-UK-20-So Lower piston press for pressing composite components. Max. press force 20 t Press table 1400 x 1000 mm Opening speed 65 mm/s Closing speed 65 mm/s Press speed 2 mm/s Shelf width 600 mm Max cylinder stroke 600 mm Hydraulics System pressure 300 bar Safety distance 404 mm Delay time 202 ms Max weight lower tool 500 kg. 2 pieces of refrigerators GWK teco cs 90.Very good condition immediately available.

Offer 26027 Technical data: - Max. pressing force 32 t - Max. ram stroke approx. 250 mm - Max. installation height 350 mm - Pitch per revolution of the handwheel approx. 48 mm - Stand width / passage approx. 575 mm - Table support surface with 4 diagonal T grooves 575 x 475 mm - Printing plate area 500 x 260 mm - Tool holder at the top 30 mm - Through-hole in the table 200 mm - Space requirement approx. W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx. 1000 kg

Presto HPK 50 HS baler, built in 2012, with perforator and riser belt (sliding belt conveyor belt) Manufacturer: Presto Type: HPK 50 HS Year of Make: 2012 Hours: 5812 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power 2 x 4 kW / 400 V Flow rate: approx. 220 m³/h Clear filling opening: 1380 x 1200 mm Climbing tape Length: 7931 mm Belt width: 1400 mm Overall width: 2026 mm Gradient: 29° Speed: 0.6 m/s Materials: paper, cardboard, foil, PET bottles Please note: All technical data refer to the manufacturer's spec ...

Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Wickert high-precision hydraulic press WKP 5000 S with sliding table. Total pressing force 5000 kN. Table size 1800 x 1200 mm, installation height min 800 mm, installation height max. 2300 mm. Opening stroke 1500 mm. Sliding table extendable 1500 mm. Year of construction 2011 very good condition. available from week 22/2026.

Used belt press for fruit by Klein type FP 2. New 1986. Modernised with the addition of inverter-controlled geared motors. Comes with water filters for cleaning the filter nets. Plus juice and circulating water pumps. Set with 3 pcs.

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

used bread press Record Erika Automat Classic Q2 30 pcs, checked, with knitted plates, for 30 pieces, weight range from 25 to 120 g, mesh no. A110311, 1.5 kW, 3.8 A, 380 V, 50 Hz