presse brake 800 used for sale

General SKU300X420 LocationBarneveld MakeEmo TypeFPAC 800 No.EMO 1467 47-57-30-16 Year of construction2007 Dimensions Cake capacity630 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface46 m2 Specified Features - Filterpress Filter presscheck Filter surface46 m² Number of platens45 and 2 end plates Internal platen sizes730x730 mm External platen sizes800x800 mm Platen thickness60 mm Cake capacity630 l. Central inletcheck Hydraulic closingcheck With hydraulic unitcheck Automatic openingcheck MaterialPolypropylene Information Total height3,0 m Weight6000 kg CEcheck Floorspace6,0x1,75 m Extra Specificationsthis machine is equipped with plate cleaner. with :recessed plates. FilterpressesEMOFilters > FilterpressesBrand > EMO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

workpiece diameter: 1000 mm workpiece weight: - kg workpiece height: - mm Control: grinding wheel motor: 11 kW total power requirement: 25 kW weight of the machine ca.: 6500 kg dimensions of the machine ca.: 4100 x 3200 x 2600 mm Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stone (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. no.: 17507 Hersteller: DEMAG Year of construction: 1998 Clamping unit Clamping force: 80 ton Opening stroke: 450 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 149 g Injection pressure: 2020 bar Measurements and weight Dimensions: 4,1 x 1,4 x 2,0 m Machine weight: 3700 kg

new motherboard with Part Number 503-00286A or Visible Number 637-00173A-A

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A tray packaging machine Multivac including an auxiliary packaging machine MCS 260 is available. Tray dimensions X/Y 1: 187mm/137mm, film width 1: 335mm, tray dimensions X/Y 2: 340mm/128mm, film width 2: 315mm, max. cycle rate: 15cycles/min, throughput: approx. 45trays/min, max. tray depth: 130mm. Machine dimensions X/Y/Z: approx. 4500mm/1050mm/2100mm, weight: approx. 1700kg. Documentation available. An on-site inspection is possible.

Dimensions (L/W/H): 1700x900x1350 mm Weight: 300 kg Total power requirement: 1,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment.

turning diameter over bed: 840 mm turning diameter over slide rest: 640 mm turning length: 3300 mm spindle bore: 74 mm turning speeds: 7,1-1400 U/min 3-jaw chuck: 315 mm steady: rapid traverse: turning dia. in gap: 920 mm length of gap: 370 mm total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. W ...

Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...

A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.

Features: Volume 16800 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 5100 mm Height 4000 mm Diameter width 2200 mm Surface inside 2B=IIIC ground Surface on the outside marbled at the front Description: Topsoil: curved bottom Airlock DN50 central 2 retaining brackets Tank cylinder: Level indicator with bar and scale Manhole 450 x 360 mm Tasting tap Nozzle Flap Size 37 Underbody: curved bottom Forward-drawn residual drain pipe central with disc valve DN65 flush with the tank wall 4 trumpet feet - fixed

The Mazak VTC 800 series is a line of powerful, large-format 5-axis turning centers for large workpieces, known for their high precision and rigidity, ideal for aerospace, energy and heavy machinery, with functions such as integrated spindles, fast tool change, and for efficient complete processing. Accessories/Options:, Tool magazine for 30 tools, Tool length measurement, tool breakage detection, Factory-installed preparation for chip conveyor (left), Magazine (HSK) for 155 tools, Air blower at the workpiece, Signal light (end of machining: yellow), Additional: Work area lighting, Coolant gun, Air blower through the spindle, 70 bar preparation, including interface for high-pressure system, Automatic opening/closing of the operator door, Mazak Monitoring System B RMP 60 (only/H/V), Collision monitoring by Brankamp, 2 Renishaw TS27R tool presetting devices, NC rotary table, Holding device ...

Machine name: Filter press used Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year of Make: 2017 Design: Side-spar press Press capacity: 470 liters Procedure: Open Filter area: 41.7 m2 Plate format: 800 x 800 mm Number of plates: 41 Panel material: Polypropylene Plate Conveyor: Automatic Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Curb weight: 4830 kg Tech. Documentation: Yes Remark: It has been used in electroplating. Accessories: A control cabinet, a control cabinet, a hydraulic system, piston pump, drip plates. Condition: Used Price: On request

Fully automatic capping machine PMFS100. High-precision mechanical design for seamless bottle positioning. Sliding cylinder modules for cap tightening. Intelligent control system with touchscreen. Electrically and pneumatically driven. Surfaces made of stainless steel or food-grade plastics (GMP-compliant). Suitable for mass production. Production capacity: 120 bottles/min, compressed air: 0.6kg/cm², air consumption: 20m³/h. Inspection possible by prior arrangement.

Milling machine Micron VCP 800 Heidenhain TNC 426 Year of manufacture 1999 Table size 1050 x 590 X 800 / Y 450 / Z 450 Maximum speed 20,000 RPM Maximum table load 400 kg Machine weight 6,500 kg Machine size 3,200 x 3,200 x 2,800 mm Spindle holder: HSK-63A Magazine slots: 30 Tool changers, all places have been renewed and adjusted. X-axis spindle replaced Without tools and vices

Vertical Cylindrical Conical Bottomed Fermenter 8000L - Brim Full Capacity Side entry manway doors Cooling Jackets, insulation and cladding Manufactured in 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

turning diameter: 820 mm turning length: 6000 mm turning diameter over slide: 520 mm Holder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: 8-1600 U/min bed width: 560 mm spindle bore: 128 mm faceplate: 600 mm 3 jaw chuck Forckrath: 400 mm steady: 250-500 mm chip conveyor: diameter of quill: 125 mm quill stroke: 280 mm total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: 9,5x2,5x2,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, p ...

Porter Lancastrian 5BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Single Skin Stainless Steel 1.5" RJTF Both Top and Bottom Ports Side Manway 2 x Sight Glasses 3 x Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Features Volume 20800 L Material V2A (AISI 304) 1.4301 Horizontal design Length 3550 mm Cylinder length 2180 mm Front diameter 2990 mm Rear diameter 2900 mm Surface inside 2B=IIIC ground Surface marbled on the outside Operating pressure 3 bar Operating temperature range 20° C Description Tank crest: Clapper bottom curved bottom Pressure relief valve Light connection 2x flange connection with cover at the back and front DN 200 Front: Manhole oval 410x310 mm Manhole round DN400 with disc valve DN 100 Tasting tap Dip shaft sleeve with temperature display analog Clarification drain with ball valve DN 50 Flange connection for sight glass DN 200

Key data: 2000 kN, 291 g/PS, 45 mm

1.0 St. gebr. Rotary Table Injection Molding Machine Manufacturer: ARBURG Type: 1500T2000-800 Year of Make: 2012 Clamping force: 200 tons Rotary table; 2 x 180° Screws DN: 45 mm Max. displacement: 313 cm³ Moulded part weight: 291 g/hp Control: SELGOCIA Equipment: 1 x Core Pulls

The Roversi butter churn 800 litres is a large-scale butter churn designed for industrial use, particularly in dairy processing facilities or large-scale butter production operations. Here are some general features and information about such a butter churn:, - Capacity: The churn is designed to handle up to 800 litres of cream at a time, making it suitable for large batches of butter production., - Construction: Typically made from high-quality stainless steel, which ensures hygiene, durability, and easy cleaning. This material is resistant to corrosion and is ideal for food processing equipment., - Design: Roversi churns often feature a modern design with user-friendly controls. They may include options for automatic or manual operation, depending on the model., - Performance: These churns are engineered for efficient butter production, enabling quick turnover of cream to butter, which  ...

CNC vertical machining center Type: MCV 800 Q Manufacturer: MAS Year: 2020 Control: Heidenhain TNC 620 4th axis Kitagawa Machine in very good condition, under power Find more here - / Contact us at -

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 800, Control panel: Stainless steel Control box, Controls, Thermomete ...

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

Overbeck Rising falling Incline belt conveyor with overdrive vorrun GF 800+5260-600-500 RA2461 Technical data: Conveyor length (NL): 6060 mm ( 800 mm vorrun + 5260 mm riser segment ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 120 mm, 360 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0.5 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides leading belt with overdrive Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6060 ( 800+5260 ) Nominal / outside wi ...

Injection moulding machine Krauss Maffei KM 800-5700 BJ 1999 Technical data on request

Mash Tun 5bbl working capacity, vertical cylindrical stainless steel vessel, with side entry door. Sparge Bridge with CIP spray ball. 2 section lift of lid. 2 section drilled plate floor. Year of Manufacture: 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU427W1353 MakeAviteq TypeR800/2 19EUVDX4 No.10301400001 Year of construction2010 LocationBarneveld Main Features MaterialStainless steel Length1000 mm Width200 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width400 mm Feeder diameter200 mm Feeder length1000 mm Feeder height750 mm Closedcheck InletDia. 215 mm OutletDia. 170 mm With vibro motor2 x 0,30 kW,(380-415 volt, 1500 rpm, (Ex)) MaterialStainless steel 1.4301 (304) Information Floorspace1,1 x 0,7 m Total height0,75 m Weight90 kg CEcheckVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

turning diameter over bed: 820 mm turning diameter over slide rest: 575 mm turning length: 3300 mm centre height: 410 mm : mm spindle bore: 125 mm spindle turning speed range: 7,1 - 1400 U/min total power requirement: 22,0 kW weight of the machine ca.: 6,0 t dimensions of the machine ca.: 6,3 x 1,6 x 2,0 mm Lathes with: - Digital readout - Rapid traverse - Röhm 3-jaw chuck 315mm - 4-position tool post - 2 steady rests - Coolant system - Emergency stop device - Machine light - Chuck guard - 2 chip trays - Spare jaws (internal and external) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This MELCHIORRE ELC 800 7S was manufactured in 2000. It is a surface grinding machine featuring a maximum wheel diameter of 800mm. Consider the opportunity to buy this MELCHIORRE ELC 800 7S surface grinding machine. Contact us for more information.

5UKBBL / 800Liter Brewery Stainless Steel, Insulated & Clad in Wood. Mash Tun with Wedge-wire Floor Plates & Front Manway. Copper with 18kW & 12kW Elements (both new) & Copper Dome Top. Hot Liquor Tank with 2 x 18kW Elements; One New. 3 x Fermenting Vessels with Temperature Probes, Tops & Lids; Raised On Stainless Steel Legs. Cold Liquor Tank, raised on Stainless Steel Legs. Underback / Hopback Vessel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine.

This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information.

This 4-axis DMG MORI NHX 8000 horizontal machining centre was manufactured in 2023. It features a Siemens S840D control with CELOS, XYZ travels of 1,400 / 1,200 / 1,350 mm, and a pallet size of 800 x 800 mm. The spindle operates at 16,000 rpm with a power of 85 kW and uses an HSK-A100 taper. Tool storage capacity is 60, and it includes a Renishaw OMP60 probe. For more information about this horizontal machining centre, please reach out to us.

This 5-axis POSmill H 800 U was manufactured in 2018. It features a 670x830x600 mm travel range, a swivel range of -120 to 120 degrees, and a continuous 360-degree rotary table. Equipped with an 18,000 rpm milling spindle, 96-position tool changer, and Heidenhain iTNC530 control, this universal machining centre is ideal for complex machining tasks. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information about this machine.

This 3-axis Matsuura V.PLUS-800 was manufactured in 2003. It features a spacious table of 1150mm x 550mm with a loading capacity of 500kg, and a robust spindle speed ranging from 40 to 12,000 RPM. Ideal for precise and heavy-duty machining. If you are looking to get high-quality milling capabilities, consider the Matsuura V.PLUS-800 machine we have for sale. Contact us for more information.

This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine.

This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine.

This 3-axis Feeler PVF 800 vertical machining center was manufactured in 2012. It features a spindle speed of up to 8,000 rpm, a tool changer with 22 tools, and rapid traverse rates of 24/20/15 m/min in X/Y/Z. The machine includes a Renishaw TS27R automatic tool setter and through-spindle cooling. If you are looking to get high-quality milling capabilities, consider the Feeler PVF 800 machine we have for sale. Contact us for more information about this machine.

This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, its ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information.

This 3-axis DMG ecoMill 800 V was manufactured in 2016. It features a robust SK40 spindle with a speed of 12,000 rpm and a 30-station tool magazine. The machine supports a maximum workpiece weight of 800 kg and includes a built-in coolant system with a high-pressure 20 bar filter. Additional features include a swarf conveyor and Renishaw touch probe. If you are looking to get high-quality milling capabilities, consider the DMG ecoMill 800 V machine we have for sale. Contact us for more information.

This 5-axis Mazak VTC 800/30SR was manufactured in 2014, featuring a robust 155-tool ATC, 15 bar through-spindle coolant, and a KUKA robot for enhanced automation. It includes a technology package for 5-axis milling and a robot interface, making it ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine.

This MORARA REU 800 cylindrical grinding machine was manufactured in 2018. It features a center height of 255 mm, a maximum grinding length of 600 mm, and a distance between centers of 700 mm. Equipped with a Siemens PLC CNC control and a Marposs measuring system, it is overhauled and CE compliant. Currently under power and visible. Contact us for further details regarding this machine.

This OMRON Quattro 800HS with Platform P30 robot arm was manufactured in 2021. It is designed for precise and rapid handling tasks in various industrial applications. Contact us for more information.

A manual clipping machine Tecno Brianza Brevetti Clippatrice H2 is available. Products: sausage products, casing types: natural casings/artificial casings/synthetic casings, clipping capacity: approx. 600pieces/h, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1750mm, weight: approx. 100kg. On-site inspection is possible.

This vertical machining centre FEELER FV-800A was manufactured in 1995 and is equipped with a Mitsubishi Meldas 520AMR control system. The machine features a 20-position tool magazine. Consider the opportunity to buy this machine. Contact us for further details.

pressure: t plate thickness: mm no. of strokes: Hub/min total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surgical Mask /foodpad /fruit pad / meat pad Production Line for Sale ype : Surgical Mask /foodpad /fruit pad / meat pad Production Line for Sale Year(s) : 2020 Quantity : 1 Location : Seller or machines location: MIDDLE EAST Last check : 06 Dec. 2025 Description meat pad, fruit pad, food pad , surgical mask production line The 3-ply mask production system offered here combines efficiency and safety features with a first-class mask of type II / IIR optimized for high wearing comfort. The integrated extra module "Single Pack" enables the mask production machine to pack each mask individually wrapped at full speed of up to 800 masks / min. The film rolls also have an autosplice function, so that the system weld the film together on the fly while unit operation. The mask is made up of 3 layers of non-woven material: - An outer layer of spunbond - A meltblown filtratio ...