presse brake 600 used for sale

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 11.500 kg dimensions: 4080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of ram: 274 mm control: Cybelec ModEva Pac weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: - mm stroke: 8 - 116 mm total power requirement: 8 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Stroke adjustment 8-116 mm, stroke rate 65/min, ram adjustment 80mm, Space requirement2.1x 1.7 x 3.1 m, Weight approx. 7500 kg Stand tiltable, 10°/20°/30° Working area: table 800 x 560 Drive: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 t distance between columns: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2 t distance between columns: - mm stroke: ? mm throat: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m hydraulic press 2t Drive: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t distance between columns: 600 mm stroke: - mm total power requirement: 22 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2 x 2 x 3,2 m No. 3421 Mould press 2500 / 700 kN Single stroke 2-hand Single stroke foot switch Automatic continuous run set-up and tipping Table 500 x 500 Working range: Pressure capacity 250 tonnes Drive: ^22 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t table length: 670 mm table width: 570 mm total power requirement: 8 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 2 x 2 x 3 m No. 2886 Spotting press 200 kN RICE TUS 60 OK 20 Stroke approx. 700 Drive: 7,5 kW Hydraulic control Extendable table 670 x 570 mm, Swivel-out top plate 670 x 570 mm, Installation height 740 mm Clearance between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 to. Asking price: 8.500,-- ex works / EXW Asking price: 12.900,-- EXW warehouse loaded free on suitable truck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t table length: 2200 mm table width: 1550 mm dayligth: 2200 mm ram return capacity: - kg table load capacity: - kp total power requirement: ? ca. 25-30 kW weight of the machine ca.: 30 t dimensions of the machine ca.: 4 7 7 m Packing: ca. 13,4 x 3 x 3 m Movie: https://www.youtube.com/watch?v=uKo7tPpdbYw The price listed is ex-warehouse in 64653 LORSCH. If you pick up the goods ex-factory, the price will be lower. Please feel free to contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t distance between columns: 550 mm stroke: 150 mm total power requirement: 11 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3 y 3 x 2,5 m No. 4105 Hydraulic press Compressive force max. 600 kN Ram stroke 150 mm Weight approx. 4500 kg Table 500 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t distance between columns: 680 mm stroke: 150 mm total power requirement: 15 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3 x 3 x 3 m No. 0214 ydraulic high-speed double-column press SMG DS 63 Clearance between the uprights 680 mm, max. distance between table top and ram 385 mm, Ejector force 15kN, largest ram stroke 150 mm. Working area: Table surface 660 x 460 Drive: 15 kW pressing force 630 kN, retraction force 51 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t table length: 1280 mm table width: 900 mm total power requirement: 7 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3 x 2 x 3,6 m m No. 5282 Spotting press 400 kN REIS TUS 90 OK 40 Working area: table 900 x 1280 Column passage 930 x 705 mm Table top 900 x 1280 mm ram plate 900 x 1200 mm Installation height 1035 mm Space requirement approx. 3 x 2 x 3.6 m Transport dimensions approx. 4 loading meters, width 2.20 / height 2.80 Weight approx. 8 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3600 mm Working height: 2600 mm Number of cylinders: 5 St. loading dimensions L x W x H: 4400 x 1150 x 2970 mm weight: 3000 kg Schafberger + Sproedhuber Bavaria Frame Press --------------------------------- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoidi ...

Working width: 3500 mm Working height: 2550 mm Number of cylinders: 6 St. loading dimensions L x W x H: 4500x950x2900 mm Hess Speedy frame press -------------------------------------- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and press ...

pressure: 120 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 155 mm throat: 350 mm ajustment speed: 100 mm/sec working feed: 9.0 mm/sec return speed: 77.0 mm/sec Control: P 40 work height max.: 878 mm table width: 104 mm oil volume: 150 l total power requirement: 11.0 kW weight: 7550 kg range L-W-H: 3550 x 2150 x 2600 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=bUaEa_nHZ6E Equipment: - NC electro-hydraulic press brakes - with NEW ELGO NC control unit P40 New price approx. 4.000 Euro Control / movement of the backgauge - X axis (target/actual input) Control / movement of the depth setting - Y axes (target/actual input) Inching mode for X axis Y axes also possible - Swivel operation, front left - NC controlled axes : Y1 Y2 X - NC electro-motorized backgauge (X axis) with 2x manually adjustable stop fingers including l ...

pressure: 100 t stroke: 380 mm table surface area: Arbeitsbreite 1100 mm pressure: 258 bar oil volume: 46 dm³ ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec total power requirement: 2,2 kW weight of the machine ca.: 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t stroke: 380 mm table surface area: Arbeitsbreite 750 mm pressure: 259 bar oil volume: 38 dm³ ajustment speed: 2,87 mm/sec work speed: 9,5 mm/sec return speed: 12 mm/sec total power requirement: 2,2 kW weight of the machine ca.: 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable. The data for this ad was created with ModulMWS - the software s ...

pressure: 160 t chamfer lenght: 4100 mm distance between columns: 3100 mm dayligth: 370 mm stroke of upper beam: 200 mm throat: 500 mm ajustment speed: 100 mm/sec working feed: 9.0 mm/sec return speed: 86.0 mm/sec work height max.: ca. 900 mm back stop - adjustable: max. 500 mm Control: CYBELEC oil volume: 150 l total power requirement: 15.0 kW weight: 12000 kg range L-W-H: 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition () Includes optional equipment - in checked conditions - machinevideo - https://www.youtube.com/watch?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit Swiveling control panel (front right) Tool & program library Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) With 4x manually adjustable stop fingers (Z- ...

pressure: 60.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm back stop - adjustable: 500 mm control: DA 66T oil volume: 150 ltr. voltage: 380 V engine output: 7.5 kW Weight: 4320 kg range L-W-H: 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=KRifrqTgkVU ------------------------------------------------ SPEED BEND PRO CNC press brake: increased installation height increased cylinder stroke and increased bending beam speeds ------------------------------------------------ Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T graphics/touchscreen ...

pressure: 6,2 t chamfer lenght: 285 mm mm distance between columns: 230 mm dayligth: 215 mm throat: 70 mm stroke: 100 mm working feed: 9,8 mm/sec return speed: 50 mm/sec quantity of oil: 10 l Control: DELEM DA 41T total power requirement: 0,7 kW weight of the machine ca.: 250 kg dimensions: 900 x 1300 x 550 mm Demonstration Machine â?¢ Basic C-frame design â?¢ Compact benchtop model â?¢ Ideal for prototypes and small production runs â?¢ Very short setup time â?¢ Functionally simple â?¢ Wide range of applications â?¢ Low noise level â?¢ Low power consumption â?¢ Easy to operate Includes optional equipment: - DELEM DA 41T CNC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATS 585 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=l9CdurfDGb0 Features: - NC-controlled hydraulic press brake - with ATLANTIC NC control ATS 585 Rear stop positioning (X-axis) Depth adjustment positioning (Y1, Y2 axes) Ability to program various programs Swiveling control panel, front left Tool and program library - NC electric-motor-driven material/backgauge (X-axis) With 2 stop fingers, manually adjustable (R and Z axes) - Tool holder system A - with upper wedge camber - Split insert/bending tools - DSP LASER RX safety d ...

pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10.0 mm Number of working hours: ca. 31.800 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 23.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front - CNC axis adjustment: Y1 - Y2 - X - R ax ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59800 € : 1130.22 € : 100 to : 400 mm : 800 x 500 mm : 500 mm : 110 mm/s : 10 mm/s : 160 mm/s : 11 kW : 1900 mm : 1700 mm : 2930 mm : 5500 kg : 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created wi ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 101500 € : 1918.35 € : 100 to : 5 mm : 1000 mm : 630 mm : 180 mm : 15 - 140 mm : 45 - 70 1/min : 8 : 90 mm : 320 mm : 570 mm : 11 kW : 1320 mm : 2200 mm : 3080 mm : 10000 kg 8-fold ram guide fixed table semi-automatic stroke adjustment motorized ram adjustment Variable speed motor hydraulic overload protection dynamic braking platen automatic circulation lubrication safety light guard Keyence user manual in GERMAN or ENGLISH Automation and control of press parameters by PLC, alarms and informations displayed on human machine interface touch screen. Standard monitoring: - Press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector The data for this ad was created wit ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10000 € : 193 € : 100 to : horizontal verschiebbar : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2630 mm : 1000 mm : 2430 mm : 1600 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11500 € : 220.8 € : 150 to : fix : 300 mm : 1570 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2500 mm : 1000 mm : 2270 mm : 2100 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 6200 € : 119.66 € : 30 to : horizontal verschiebbar : 200 mm : 775 mm : 125x80 mm : 5 mm/s : 10 mm/s : 1500 mm : 700 mm : 1800 mm : 400 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 8900 € : 171.77 € : 100 to : fix : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2500 mm : 1000 mm : 2200 mm : 1600 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7300 € : 140.89 € : 60 to : horizontal verschiebbar : 250 mm : 1040 mm : 180x120 mm : 4 mm/s : 10 mm/s : 1710 mm : 700 mm : 2100 mm : 800 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10200 € : 195.84 € : 150 to : fix : 300 mm : 1070 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2050 mm : 1000 mm : 2270 mm : 1870 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 € : 436.8 € : 150 to : 1520 mm : 300 mm : hydraulisch : 11 kW : 2630 mm : 1000 mm : 2450 mm : 3270 kg : 610 mm : 1520 mm : 5 mm/s : 9 mm/s : 10 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 171300 € : 3237.57 € : 400 to : 4050 mm : Y1 / Y2 / X Achse : 365 mm : 3400 mm : 510 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 1050 mm : 154 mm : 250 l : 37 kW : 5750 mm : 2110 mm : 3640 mm : 27760 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides ...

: neu : 2026 : 070224 : September 2026, Zwischenv : Türkei : 25700 € : 490.87 € : 15 to : 1.4 mm : 320 mm : 490 mm : 130 mm : 1 - 40 mm : 200 1/min : 4 : 40 mm : 30 mm : 210 mm : 215 mm : 1.5 kW : 1160 mm : 1180 mm : 1730 mm : 922 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic cen ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 197600 € : 3734.64 € : 400 to : 6050 mm : 3 : 365 mm : 5100 mm : 510 mm : 630 mm : hydraulisch : 120 mm/s : 8 mm/s : 100 mm/s : 750 mm : 350 mm/s : 300 mm/s : 250 mm : 1220 mm : 154 mm : 500 l : 37 kW : 7500 mm : 2110 mm : 3810 mm : 34660 kg 3 axes (Y1, Y2, X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC cr ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 144300 € : 2727.27 € : 320 to : 3050 mm : Y1 / Y2 / X und R Achse : 365 mm : 2600 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 2 x 11 kW : 4300 mm : 1820 mm : 3330 mm : 16500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup a ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 98300 € : 1857.87 € : 135 to : 3050 mm : Y1 / Y2 / X und R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 200 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 4200 mm : 1680 mm : 2750 mm : 9500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tr ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 173600 € : 3281.04 € : 200 to : 7 mm : 1350 mm : 800 mm : 250 mm : 18 - 180 mm : 35 - 50 1/min : 900x570 mm : 8 : 110 mm : 410 mm : 820 mm : 22 kW : 1500 mm : 2633 mm : 3950 mm : 20000 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector automatic cams reset double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector PRICE FCA I ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : fix : 1000 mm : 300 mm : 1020 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 8 mm : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2450 mm : 2400 kg 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2500 t table length: 5200 mm table width: 2300 mm PRESS FORCES: • CAPACITY : 2500ton • Point pressure capacity: • - Upper 1600t • - Down 900ton • Slide stroke: 650mm • Slide adjustment: 225mm • Slide stroke number: continue 9~25spm • Die-height: 1250mm • Slid size(LxR ,FxB): 5400x2400mm • Bolster size(LxR, FxB, T): 5200x2300x200mm • Balance capacity: 30ton • Main motor: DC 355kw • Feed back(bolster upper side): 700,780mm • Feed back stroke : 550,700,1000mm • Cramp stroke : 0-250mm • Lift stroke: 0~150mm • Transfer inner size(cramp): 650~2200mm • Die cushion capacity • No.1 station 120ton • No.2 station 80ton • No.3 station 60ton • No.5,6,7 station: 5ton • Stroke: 200mm • Bed size: 480x1780mm • Stop time: 430ms The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 94120 € : 1778.87 € : 175 to : 4050 mm : Y1 / Y2 / X Achse : 265 mm : 3600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 5250 mm : 1700 mm : 2850 mm : 12780 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 112813 € : 2132.17 € : 320 to : 3050 mm : Y1 / Y2 / X Achse : 365 mm : 2600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 37 kW : 4300 mm : 1820 mm : 3330 mm : 17100 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55600 € : 1050.84 € : 30 to : 200 mm : 500?800 mm : 600x1000 mm : 450 mm : 100 mm/s : 18 mm/s : 165 mm/s : 11 kW : 1950 mm : 1750 mm : 2650 mm : 4700 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 106178 € : 2006.76 € : 175 to : 3050 mm : Y1 / Y2 / X / R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 200 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 2 x 4 kW : 4250 mm : 1700 mm : 2750 mm : 10900 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on ...

: neu : 2026 : 070179 : prompt, Zwischenverkauf v : Türkei : 19900 € : 382.08 € : 1 : 150 to : fix : 300 mm : 610 mm : 1020 mm : 9 mm/s : 5 mm/s : 10 mm/s : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2470 mm : 2450 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 137900 € : 2606.31 € : 220 to : 6050 mm : Y1 / Y2 / X Achse : 265 mm : 5100 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 1050 mm : 154 mm : 250 l : 22 kW : 7500 mm : 1770 mm : 3350 mm : 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides ...

: neu : ca. 4 Wochen ab Auftragse : Türkei : 66900 € : 1264.41 € : 60 to : 250 mm : 550 x 850 mm : 600x1000 mm : 500 mm : 100 mm/s : 10 mm/s : 165 mm/s : 11 kW : 1950 mm : 1900 mm : 2750 mm : 5300 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13200 € : 253.44 € : 100 to : horizontal verschiebbar : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2560 mm : 1000 mm : 2480 mm : 1755 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 28000 € : 534.8 € : 70 to : fix : 1050 mm : 500 mm : 700 mm : 900 mm : 29 mm/s : 10 mm/s : 5 mm/s : 800x600 mm : 700x350 mm : 1700 mm : 1000 mm : 2300 mm : 1400 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the rear  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 187100 € : 3536.19 € : 400 to : 4050 mm : Y1 / Y2 / X und R Achse : 365 mm : 3400 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 154 mm : 2 x 11 kW : 5750 mm : 2110 mm : 3450 mm : 27780 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup a ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 48500 € : 926.35 € : 60 to : 3.5 mm : 500 mm : 700 mm : 190 mm : 1 - 100 mm : 65 1/min : 4 : 70 mm : 45 mm : 260 mm : 340 mm : 5.5 kW : 1250 mm : 1350 mm : 2400 mm : 3500 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Automatic central lubrication Equipment in accordance with CE regulations OPTIONS: vibrations pads bolster plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.