presse brake 600 used for sale

Diameter approx. 1650mm, total height approx. 4800mm. Auction-ID: A1-50393-74

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and state video: https://youtu.be/fsXyB1LdByQ - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Battery: 35/2019 24V 375Ah, voltage measured at rest at 24.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale - with charger Auction-ID: A1-50765-381

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/r6jCU0nOET0 - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 26/2023 48V 625Ah, voltage measured at 50.0V at rest - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - Semi-cab with windshield wipers - Side fall-out protection (can be easily dismantled) - white non-marking tires - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-50765-110

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/85AeG72VUI0 - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Battery: 2019 24V 375Ah, idle voltage measured at 25.2V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale - with charger Auction-ID: A1-50765-356

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and state video: https://youtu.be/DSFStWZnJXI - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Battery: 2013 24V 240Ah, idle voltage measured at 24.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - with charger Auction-ID: A1-50765-339

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/5f49DYz_uCM - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Battery: 24V 375Ah, voltage measured at rest at 25.0V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale - with charger Auction-ID: A1-50765-326

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Dq_fQ7pp-zM - Former Linde full-service device - Service valid until 09/2027 - UVV valid until 09/2027 - Battery: 21/2021 48V 6PzS 750Ah, voltage measured at rest with 52V - Facelift model - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Semi-cab with windscreen with windscreen wiper - Roof pane - LED front work light - LED work light at the rear - Comfort seat with lumbar support and seat heating - With high-quality charger from 2026 Auction-ID: A1-50765-130

Engine: 224 cc 4-stroke petrol engine Cutting width: 53 cm Maximum range: Controllable up to 600 meters away Fuel tank: 1 litre Consumption: Approximately 0.7 liters per hour Maximum Inclination: Up to 45 degrees Maximum speed: 3 km/h Cutting height: Adjustable between 3 and 12 cm Control system: Remote control via wireless transmitter, with a range of up to 600 meters Design: Robust and suitable for slopes up to 45 degrees Ease of use: Easy operation and adjustability for optimal mowing results Safety: Incl. emergency braking and obstacle detection for safe use on steep slopes Remote lawn care, without physical presence Auction-ID: A1-40324-112

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/AgRs-qQ27z0 - Former Linde full-service device - Next service due in 1000 operating hours - Battery: 02/2018 80V 775Ah, voltage measured at rest with 83.7V - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; fork adjuster with side shift - Semi-cab with windshield wipers - Semi-cab with windshield wipers - white non-marking tires - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-50765-85

For sale is an 800 to step press. Technical data see photos. Press we sell from location.

We can offer you all types of Wafios nail machines from S25 - N90

We can offer you all types of Wafios nail machines from S25 - N90

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

; in order

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg

Pneumatic press 2643 Assembly through pivot table outside the working area With protective cage and release only with a retracted swing table Table size: 10 cm x 10 cm

Force of pressure: 30 to piston stroke: 150 mm table width: 185 mm passage (S): 530 mm bore (F): distance of 140 mm cylinders - table (F1): distance 150 mm cylinder - table (F2): 1030 mm cylinder movable (M): 200 mm width (A): (B depth of 800 mm): 700 mm height 1 (C): 1775 mm height 2 (D): 1805 mm weight: 162 kg

Pneumatic press with foot-tripping

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

Force of pressure: 50T piston stroke: 200 mm table width: 260 mm passage (S): 730 mm bore (F): distance 205 mm cylinder - table (F1): distance 75 mm cylinder - table (F2): 1050 mm cylinder movable (M): 240 mm width (A): 1040 mm depth (B): 800 mm height 1 (C): 1835 mm height 2 (D): 1880 mm weight approx.: 287 kg

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

Press Type: Twin Cavities Mold Type: Segmented Type of Tires: Passenger and Light Trucks Bead Diameter Range: 16â â 20â Closing force: 650,000 Lbs / 3680 KN Heating System: Steam Bladder System: Hydraulic Water Max. Pressure: 20 Bar Power Supply: 18.5 KW, 380 V / 50 Hz Loader: Available Controls: Simatic S7

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

FRICTION BELT FOR SCREW PRESS DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw presses, riveted, new! -Dimensions: 530 mm i. diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide! We confirm best service and short delivery times.

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg

A roll punching press for stamping is available up to A3. The die is pulled under the roll.

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

Properties: + Semi-automatic + very good value for money + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + coated knife head + even division of the dough + excellent round inges, the dough pieces + ergonomic knife cleaning position (head swivelable 90 degrees forward) + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES equipment: + 3 impact plates included SPECIAL accessories, available at an extra cost: - additional impact plates for DivObun Size 4-30: EUR 93,-- net / Pcs

automatic baling press Manufacturer: Avermann Type: AVOS 1810-5-74/100 Built: 2011 Engine hours: approx. 13,685 h technical data: Pressing force: 100 t Operating pressure 320 bar Filling opening: 1,800 x 1,000 mm Channel format: 1,100 x 700 (W x H) Drive power: 1 x 45 kW + 1 x 30 kW, Total connection power: 105 kW, Hedging: 200 A fully automatic binding 5-fold vertically, Throughput: at 30 kg/m3: approx. 9.0 t/hour at 50 kg/m3: approx. 13.0 t/hour at 100 kg/m3: approx. 20.0 t/hour Bale weights up to approx. 800 kg Oil tank volume: approx. 2,000 Ltr. Transport dimensions: approx. 11,200 x 2,355 x 2,700 mm Machine weight: approx. 23.0 t Machine will be dismantled in January 2021. Subject to errors in the technical data!

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

Plywood Press, manufactured by Siempelkamp, working sizes 2500 x 1300, 10 floors

Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.

Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

capacity 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ \" inside connection for washing bath 2 \" outside mash discharge height 1 480 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen ; new machine - top condition

Wash waw LC40 with raetzmuehle RM40 for belt presses EBP500, EBP650 and EBP820 nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A 000 mm width 700 mm Hehe 2400 mm He he Assumption 800 mm Weight 285 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inner Connection for washingHeight mash release 1500 mm Height fruit delivery 800 mm 9mm and 12mm Cutting sieve ; New machine - best condition

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

Pneumatic multi function press Operating pressure 6-8 bar Weight 106 kg dimensions 0.70 x 0.38 x 1.05 m Comments: Multi function punch air consumption 18 l per stroke, pneumatic punching operation via foot switch tripping

Pelessierpresse Hanau, for pressing wagon wheels on axle, gemaess pictures

Table 1750 x 920 mm, fixed stroke 101 mm, see pictures and description,; All right