presse brake 600 used for sale

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 600 to : 500 mm : 6.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 6000 mm : 3000 mm : 43000 kg : horizontal verschiebbar : 2550 mm : 2200 mm : 4600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 75740 € : 1431.49 € : 600 mm : 1500 mm : 300 mm : 80 mm : 400 mm : 400 mm : 8 : 90 MK : 3 : 20 - 100, 80 - 400, 400 - U/Min : max. 8 m/min : max. 8 m/min : 290 mm : 90 mm : 5 MK : 225 mm : 11 kW : 3,5 / 22 kW/Nm : 1,75 / 11 kW/Nm : 120 Nm : 1250 daN : 1050 daN Fast and simple communication between the operator and the lathe. Simple workpieces are machined in the same way as on the universal lathe, but more efficient. Complicated workpieces are machined in the same way as on the universal lathe, but faster. Complicated workpieces are machined in the same way as on the CNC lathe, but easier. Based on the controller Schneider Magelis the intelligent, self-developed ZMM Sliven software leads the operator also without programming skills simple and fast to the finished workpiece. The interface is simple and with large icons, which is convenie ...

Router 600 router Spindle to arm distance 600 mm Twin speed spindle drive motor with 2.2/1.5 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-90-45 degrees Vertical spindle stroke 80mm Height-adjustable table Pneumatic control of the spindle from the pedal

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

x-travel:6000 mm y-travel:2100 mm z-travel:1500 mm Controls:HEIDENHAIN iTNC 530 BASIC DESIGN:. - basic design : travelling column :. WORKING RANGE -MILLING-:. - x-axis travel:6000 mm - y-axis travel:2100 mm - z-axis travel:1500 mm FLOOR PLATE:. - clamping surface (left-right):7000 mm - clamping surface (front-back):2000 mm WORKING SPINDLE / HEAD:. - spindle type : orthogonal head :. - tilting range:360 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - tilting range (2nd axis):270 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - spindle revolutions (min):20 /min - spindle revolutions (max):4000 /min - spindle diameter:90 mm - taper fixture : ISO SK 50 :. - spindle power (continuous):32 kW - torque (max.):910 Nm AXIS DRIVES:. - feed velocity (min):2 mm/min - feed velocity (max):20000 mm/min - rapid traverse:25000 mm/min ELE ...

spindle speed::max. 12000 tool taper:HSK 80 . b-axis:360 x 0,001 ° worktool support (A-axis):+40 / -95 ° weight of the machine ca.:25 500 Kgs. x-travel:800 mm y-travel:700 mm z-travel:630 mm dimensions of the machine ca.:6200 x 3000 x 3200 mm pallet size::500 x 500 mm no. of tools in the magazine:61 Nos. Weight approx.:23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle

x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 CNC universal milling machine with toolchanger, Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device oroginal table included

x-travel:600 mm y-travel:410 mm z-travel:520 mm tool change unit:16 turning speeds:8000 1/min control:SIEMENS 810 shopmill table surface area:840 x 420 mm rapid traverse X- and Y-axis:36 m/min rapid traverse Z-axis:20 m/min taper ISO:SK 40 spindle drive:15 kW weight of the machine ca.:2,5 t space requirements approx. LxWxH:2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on"

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping...

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply,

x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 CNC universal milling machine (without toolchanger), Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device

turning diameter:1250 mm turning length:6000 mm spindle bore:130 mm Turning rate:5 - 710 U/min. turning diameter over bed slide:850 total power requirement:37/52 kW weight of the machine ca.:16 t dimensions of the machine ca.:12 x 4 x 2 m Teach In Controll HEIDENHAIN 1 fixed steady

length in total:1200 mm band width:500 mm conveying height:1200 weight of the machine ca.:1 t dimensions of the machine ca.:4,0 x 1,5 x 2,2 m swarf conveyor with coolant attachment Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.

faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D

material width coil line:600 mm coil weight in kg:2 x 3000 kg coil internal diameter:460 - 630 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm Number of Straightening rolls:9 roll diameter:30 mm material cross-cut:1200 mm² weight:9,5 t Dimensions (WxDxH):4,3 x 2,6 x 2,6 m straightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven

Pressure:600 t distance between columns:2600 mm stroke:900 mm Distance table/ram, max. stroke up, adjustment up:1600 mm Table surface area:2500 x 1730 mm pressure of drawing cushion in table:250 t Die cushion stroke in table:400 mm Die cushion area in table:2300 x 1300 mm Die cushion pressure in ram:63 t Die cushion stroke in ram:160 mm Die cushion area in ram:1900 x 1300 mm Ram surface:2500 x 1730 mm Side window:1100 mm Oil volume:3500 l Power capacity:200,0 kW Dimensions (WxDxH):4,1 x 2,8 x 9,6 m Height above floor:6,4 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable cutting impact absorption:hydraulic

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

Overview  This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Technical data  Total tanks: 8 units Isobaric tanks: 5 units Atmospheric tanks: 3 units Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery  Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L  

Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz Filling product: beer, carbonated beverages, kombucha, functio ...

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

Soraluce SLP-6000Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpmMovement X/Y/Z : 4500/1800/1300 mm____________Description:In General:Year of manufacture:2017Control system:Heidenhain TNC 640Travel range X/Y/Z:4,500/1,800/1,300 mmSpindle speed:5,000 rpmTool holder:SK 50Milling head (spindle):Technology:Diagonal head with gear spindleIndex:0.001°Speed:5,000 rpmTool holder:SK 50Max. power:43 kWMax. torque:1,045 NmCoolant supply:Coolant + blast airWorking table:Clamping surface:6,000 x 1,100 mmT-slots:6 x 22H12, spacing 140 mmTool magazin:Technology:Chain magazineNumber of stations:40Tool changer:Double gripper (horizontal/vertical)Max. tool diameter:125 (250) mmMax. tool length:400 mmEquipment:Position measurement systems:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system with filter, 20 barWorkpiece measurement:Funk M&H probeSet-up op ...

Exeron HSC 600Year of manuf. : 2020 Control : Heidenhain TNC640 Speed : 42000 rpmMovement X/Y/Z : 650/550/400 mmTool holder : HSK-E40 ____________Description:Spindle:Technology:MotorspindleSpeed:42.000 rpmPower (max.):13,5 kWTaper:HSK-E40Workingtable:Clampingsurface:530 x 900 mmTableloading (max.):600 kgIn general:Toolmagazine:60 StationsRapid travers in X/Y/Z:50 m/minEquipment/Accessory:Positionsensor:Direct scales in X/Y/ZChipmanagement:ChiptrayCoolingmanagement:MinimumlubricationWorkpi ecemeasurement:Touch probe, Renishaw OMP 400Toolmeasurement:Laser, BLUMSetup operations:Electronic handwheelFurther Equipment:Spindlechiller

working width: 600 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units seperatly adjustable; 1. brush: methal brush, diameter 220mm; 2. brush: tynex brush granulation 80, diameter 220mm; height adjustment: handwheel; read out workpiece thickness: mechankal counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 4 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1200mm; weight: 650kg;

article nr. : 67347-0101 Control card brake of PT 8 Tetra Pak Pull Tab applicator

Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: 628 626 44 RIW -Dimensions: see photos -Dimensions: Ø 310 x 40 mm -Weight: 0.9 kg

Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: 089 746 84 KB 160 RIW -Dimensions: see photos -Dimensions: Ø 275 x 40 mm -Weight: 1.0 kg

Rotor brake, disc brake, electro-hydraulic disc brake, crane brake, disc, drum and storm brakes, overhead crane brake -Manufacturer: Pintsch Bubenzer, rotor brake disc brake unused -Type: SB 23-450x30-80/6 -Braking torque: 1850 Nm -Accessories: incl. 3 sets of replacement burners -Quantity: 2 pieces brake available -Price: per piece -Dimensions: 370/330/H650 mm -Total weight: 105.7 kg/pc.

New brake bench never installed on pallet Auction-ID: A1-42014-290

Servo motor with brake, permanent magnet motor REXROTH MAC063B-0-JS-3-C/095-A-1/S001 228369 shaft: Ø 14 mm flange: 100 x 100 mm New ! Dimensions: 250 x 100 x 145 mm

Servo motor with brake, permanent magnet motor SIEMENS 1FK7032-5AK71-1HH0 6000 rpm IP64 270 V shaft: Ø 14 mm Flange: 75 x 75 mm used, tested ! Dimensions: 250 x 120 x 75 mm

Servo motor with brake, permanent magnet motor REXROTH MSK050C-0600-NN-M1-UG1-NNNN R911298355 6000 rpm 600 V AC IP65 shaft: Ø 19 mm flange: 98 x 98 mm used, tested Dimensions: 275 x 140 x 100 mm

Server cabinet, control cabinet PAGUS Centrotherm 600 x 600 x 2100 mm 2 doors and wheels Dimensions: 600 x 810 x 2250 mm

Strip cylinder with position sensors FESTO DBP-32-600-PPV-AB stroke 600 mm Piston diameter Ø 32 mm Dimensions: 880 x 72 x 55 mm

Item No. Z-HF63-WH - 30 cm rack with 30 plates - As good as new device, built in 2022 - Total Trubraum approx. 249ltr. - Total filter area approx. 19.5m² - With electric hydraulic pump - without feed pump - Connection thread DN50 DIN 11851 - with monofilament cloths and end cloth - 1 year functional warranty

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0-600 bar, unused, original packaging -Type: 1/BM 20/2 160 0-600 kg/cm² -Number: 20x pressure gauges available -Price: per piece -Cardboard dimensions: 200/200/H70 mm -Weight: 0.9 kg/pc.

various accessories

New hydraulic press brake. Pressing force: 125Tn. Working lenght: 3200mm. Distance between housings: 2650mm. Stroke of the ram: 120mm. Distance between table and ram: 415mm. Depth of throat: 320mm. Motor power: 7,5kw. Weight: 7850Kgs. Dimensions: 3300x1800x2690mm. CE.

Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.

Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t

Brake drum turning and grinding machine - see pictures More: Brake jaw grinding machine SCLEDUM SC 600 see picture below

Hydraulic press brake. Working length: 3.000mm. Pressing force: 200Tn. Back gauge.

Braking resistor, original packaging, ERBG012R01K9 Lenze, new Attention: Original Lenze product - No replica from… - incl. manual Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Function warranty! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Rated force 2200 Kn Max bending length 3340 mm Table length 3220 mm Table width 180 mm Table height 960 mm Passage between press bar 450 mm Stroke 180 mm Extension 410 mm Distance between stands 2700 mm Max Print 292 Bar Number of cylinders 2 pieces Oil capacity 190 litres Engine power 15 kW Max delivery speed 100 mm/s Working speed 1 - 7.5 mm/s Stroke speed 1 - 75 mm/s Total height with NC 2990 mm Total length with NC 3750 mm Total width with NC 2200 mm and light curtain 250 mm Total weight with NC 12500 kg Amada bending system Length 3750 mm Depth 2200 mm Height 2940 mm

<b>Features:</b> Manufacturer: Bito Roll length: 830mm Diameter: 80mm Material: steel/galvanized Tailor-made logistics for your intralogistics We are your competent contact for roller conveyors, belt conveyors, schraegfoerderers or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our long-running experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and material flow cost-appropriately and sustainably. We can offer you even fully automatic sortin ...

Properties: Manufacturer: Interroll Condition: good (used) Clamping length: 630mm Roll length: 610mm Roll diameter: 60mm Rollers with spring axle Material: Steel Stock: 39 pieces Price per piece Tailor-made logistics for your intralogistics We are your competent contact for roller conveyors, belt conveyors, schraegfoerderers or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our long-running experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and ...

SIMOTICS S synchronous servo motor + brake, 1FT6086-8AF71-4AH1, Siemens, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - N=3.000/min, Nmax=4.400/min, - Mo=22,4/27 Nm, Mn=18,5Nm, - Brake 24V - Shaft diameter D32mm + key Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Al ...

The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.