137,951 used machines on RESALE, but how to find them? Machine Search
The machine is in good technical condition; testing is possible by prior arrangement. NC-controlled X and Y axes, manual crowning table, backgauge extension to 1000 mm, Fiessler Akas Laser safety system, sectional tooling (upper: 30°, R 0.8 and 3 mm). Not used since 2019.
Gas pressure and heat generator from 2018 with approx. 1,500 operating hours. 9.5 bar, 135 KWth, 1,200 – 1,800 rpm, Compressor: Compair EK 175 NG Manufacturer: Bosch Model: CA 570 NA Type: Gas CHP Pressure and Heat Engine: MAN E0834 E302 Compressor: Compair EK 175 NG Serial Number: 100866970 Output [bar]: 9.5 Power [KWth]: 135 Year of manufacture: 2018 Operating hours: approx. 1,500 Weight unit [kg]: 2,500 Dimensions LxWxH [m]: 3.3 x 1.0 x 1.85
Key data: 135 t, 3100 mm, 2600 mm
Control DELEM DA 69T the machine was distributed by Knuth and manufactured in Turkey. Pressure capacity 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Projection 410 mm Stroke 265 mm Opening width 485 mm Table width 108 mm X-axis travel 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power main drive 15 kW Hydraulic tank capacity 250 l Bwebpxv Izez Hmxujpeu Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some stamps and dies are included (see pictures) Viewing possible under power.
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Configuration: Sliding worktable, vacuum/pressure vessel, pneumatic control manifold, vacuum pump protection/control, pressure gauges, safety mesh guarding and separate operator control console Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Approximate weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-18
AS Metal Transform Vacuum Membrane Press Industrial membrane press for vacuum forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2017 Serial number: 1711-017 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic controls, pressure gauges, heating system and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 5,520 kg All descriptions are indicative only. Auction-ID: A1-50546-19
Vatan Otomasyon / VEEOS U.P.H.K.P. 010 Four-Column Hydraulic Press Four-column hydraulic press for controlled compression and forming operations. Manufacturer: Vatan Otomasyon / VEEOS Model: U.P.H.K.P. 010 Year: 2018 Serial number: U.P.H.K.P. 0985 Capacity: 10 t Power: 4 kW Electrical supply: 380 V Configuration: Four-column hydraulic press with hydraulic power unit, reservoir, motor, pressure gauges and control system Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,200 × 2,300 mm Weight: 1,640 kg All descriptions are indicative only. Auction-ID: A1-50546-11
Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Press Industrial four-column hydraulic press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2020 Rated capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 110 A Maximum main fuse: 125 A Configuration: Hydraulic upper ram, guided moving platen, T-slotted working table, separate hydraulic power pack with reservoir, valve block and pressure gauges, safety guarding and operator control/HMI Control system: Gani Otomasyon, project no. 14276177 Working table: Approx. 880 × 800 mm Hydraulic oil: Shell Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,500 × 1,300 × 2,400 mm Approximate weight: 3,000 kg All descriptions are indicative only. Auction-ID: A1-50546-13
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Serial number: 2207-010 Power: 39 kW Electrical supply: 380 V, three-phase, 50 Hz Configuration: Sliding worktable, membrane pressing chamber, vacuum system, pneumatic controls, safety guarding and separate operator console Control system: Schneider Electric Harmony HMI Worktable length: Approx. 2,530 mm Condition: Used Approximate dimensions: 4,500 × 3,000 × 2,800 mm Weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-16
Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Rubber Press Four-column hydraulic rubber press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2022 Serial number: U.P.H.K.P. 1750 Capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 125 A Maximum main fuse: 125 A Electrical control supplies: 380 V AC / 220 V AC / 24 V DC Configuration: Four-column construction with hydraulic power unit, guarded working area and control cabinet Control system: Gani Otomasyon, project no. 16465453 Condition: Used Operational status: Untested Approximate dimensions: 1,700 × 1,500 × 2,700 mm Approximate weight: 3,200 kg All descriptions are indicative only. Auction-ID: A1-50546-15
Uğursan U.P.H.K.P. 010 Four-Column Hydraulic Rubber Press Four-column hydraulic press for rubber processing and controlled compression operations. Manufacturer: Uğursan Model: U.P.H.K.P. 010 Year: 2018 Serial number: U.P.H.K.P. 0985 Rated capacity: 10 t Power: 4 kW Electrical supply: 380 V Configuration: Upper hydraulic ram, guided moving platen, T-slotted lower working table, hydraulic power pack with reservoir, valves and pressure gauges, safety guarding, HMI/operator controls and stack light Control system: Vatan Otomasyon / VEEOS Hydraulic oil: Shell Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,100 × 2,200 mm Weight: 1,640 kg All descriptions are indicative only. Auction-ID: A1-50546-12
Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Rubber Press Four-column hydraulic rubber press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2020 Serial number: U.P.H.K.P. 1010 Capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 110 A Maximum main fuse: 125 A Configuration: Hydraulic power unit, heated upper and lower platens, HMI operator control, safety guarding and hydraulic oil system Control system: Gani Otomasyon, project no. 14276033 Hydraulic oil: Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,700 × 1,500 × 2,700 mm Approximate weight: 3,000 kg All descriptions are indicative only. Auction-ID: A1-50546-14
Vatan Otomasyon U.P.H.K.P. 010 Four-Column Hydraulic Press Industrial four-column hydraulic press for controlled compression and forming operations. Manufacturer: Vatan Otomasyon / VEEOS Model: U.P.H.K.P. 010 Press capacity: 10 t Electrical supply: 380 V Configuration: Upper moving platen, lower tool table, hydraulic power unit, pressure gauges, safety guarding, HMI/operator control panel and stack signal light Approximate tool/table width: 600 mm Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,100 × 2,200 mm Approximate weight: 1,500 kg All descriptions are indicative only. Auction-ID: A1-50546-10
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2017 Serial number: 1711-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic distribution system, pressure/temperature monitoring, heating system, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 5,520 kg All descriptions are indicative only. Auction-ID: A1-50546-20
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Serial number: 2207-010 Power: 39 kW Electrical supply: 380 V, three-phase, 50 Hz Configuration: Sliding worktable, vacuum/pressure system, upper pressure vessel, safety guarding and separate operator control console Working table: Approx. 2,500 × 1,600 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-17
Hammelmann Hochdruckpumpenanlage HDP 202 / S 1100-20, Baujahr 2019, mit nur ca. 300 Betriebsstunden. Die Anlage befindet sich in einem sehr guten Zustand, ist voll funktionsfähig und sofort verfügbar. Technische Daten: - Hersteller: Hammelmann - Typ: HDP 202 / S 1100-20 - Baujahr: 2019 - Maschinen-Nr.: B9.02202.0267 - Betriebsstunden: ca. 300 h - Max. Betriebsdruck: 3.000 bar - Förderleistung bei 3.000 bar: 28 l/min - Alternativer Betriebspunkt: 1.000 bar / 110 l/min - Antrieb: Volvo TAD 873 VE Dieselmotor - Motorleistung: 235 kW - Abgasstufe: Stage IV / Tier 4 Final - Motordrehzahl: 2.200 U/min - Pumpendrehzahl: 2.150 U/min - Max. Flüssigkeitstemperatur: 40 °C - Sauganschluss: DN100 - Ausführung im 10-Fuß-Container Die Anlage kann mit zwei unterschiedlichen Betriebspunkten betrieben werden: 1.000 bar / 110 l/min oder 3.000 bar / 28 l/min. Original Hammelmann M ...
AS Metal Transform Vacuum Membrane Press Industrial membrane press for vacuum forming and laminating foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-019 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, pressure vessel, pneumatic/vacuum system, heated upper pressing section, operator control panel, emergency stops and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-29
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002M Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Hydraulic pressure: Up to 500 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic valve system, heated upper press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,920 kg All descriptions are indicative only. Auction-ID: A1-50546-23
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2104-014 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic control system, vacuum system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,385 kg All descriptions are indicative only. Auction-ID: A1-50546-26
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-016 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-24
ESER E 925 Veneer Cutting Press Heavy-duty swing-arm cutting press for die-cutting veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Year: 2017 Serial number: KKP 03 Power: 1.5 kW Electrical supply: 220–380 V Configuration: Manually adjustable upper cutting head, cutting table and separate electrical control cabinet Control cabinet: Marian Galád, type KKP 01, 2018, 400/230 V, 16 A, 50 Hz, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-32
- Capacity 6t. - A control panel screen is missing. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-4
pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 140 mm/sec work speed: 10,5 mm/sec return speed: 150 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 220 mm oil volume: 400 ltr. voltage: 380 Volt total power requirement: 30.0 kW weight: 21300 kg range L-W-H: 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Binks 83Z-211-CE Pressure Feed Paint Tank & Spray System Pneumatic pressure-fed coating system comprising a Binks pressure tank, regulators, pressure gauge, hoses, DeVilbiss spray gun and auxiliary spray cup. Manufacturer: Binks / Carlisle Fluid Technologies Model: 83Z-211-CE Power: Pneumatic Tank capacity: 9.5 L Maximum operating pressure: 5.5 bar Safety valve: 5.5 bar Fluid group: 1 Operating temperature: 0–50 °C Hazardous-area classification: Suitable for Zone 1; Ex II 2 G X Included equipment: Pressure tank, regulators, gauge, hoses, DeVilbiss spray gun and auxiliary spray cup Condition: Used Approximate dimensions: 450 × 450 × 700 mm Approximate weight: 25 kg All descriptions are indicative only. Auction-ID: A1-50546-66
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane and foil onto panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-017 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum pump/system, pressure vessel, pneumatic controls, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-25
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating decorative films and similar materials onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Industrial sliding worktable, hydraulic/vacuum system, pressure vessel, heated upper pressing section, operator control panel with HMI, emergency stops and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-30
Uğursan HKP 200 Hydraulic Heated Rubber Press Hydraulic rubber press for heated compression moulding and pressing of rubber products, with large heated upper and lower platens, hydraulic power unit, touchscreen operator control and safety light barriers. Manufacturer: Uğursan Model: HKP 200 Year: 2022 Serial number: UP.HKP.3028 Pressing force: 200 t Operating pressure: 210 bar Total power: 51 kW Motor power: 15 kW Resistance heating: 36 kW Electrical supply: 380 V Configuration: Four-column construction, heated upper and lower platens, hydraulic power unit, touchscreen control, automatic heating controls and safety light barriers Condition: Used Approximate dimensions: 2,300 × 1,800 × 3,900 mm Approximate weight: 13,600 kg All descriptions are indicative only. Auction-ID: A1-50546-50
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2101-01 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, hydraulic power unit, pneumatic/vacuum controls, pressure vessel, heated upper pressing section, operator control panel and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-28
Vacuum Membrane Press AS Metal Transform Manufacturer: AS Metal Ağaç Makinaları San. Tic. Ltd. Şti. Model: Transform Machine code: MBPR06 Year: 2018 Serial number: 1801-002 Industrial vacuum membrane press for forming and laminating workpieces. Heavy-duty machine with enclosed pressing chamber, pressure/vacuum vessel, sliding loading table, safety guarding and separate operator control panel. The sliding worktable/platen is approximately 2,500 mm long. Power: 45 kW Electrical supply: 380 V, 3-phase, 50 Hz Required compressed air pressure: 6–7 bar Hydraulic system: Oil-operated Hot-oil system: Transfer oil Approx. dimensions (L × W × H): 4,500 × 3,000 × 2,800 mm Weight: 6,370 kg Condition: Used. All descriptions, technical specifications, dimensions and other information are indicative only. Auction-ID: A1-50546-21
ESER E 925 Veneer Cutting Press Used swing-arm veneer cutting and punching press for processing veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Configuration: Swing-arm cutting head, cutting table and separate electrical control cabinet Electrical cabinet: Marian Galád, type KKP 02, production no. 2062018, 2018 Electrical specifications: 400/230 V, three-phase, 50 Hz, 16 A, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Approximate weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-33
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for thermoforming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2102-004 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic controls, vacuum system, heated pressing section, operator control panel and perimeter safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-27
Uğursan Heated Hydraulic Rubber Press Four-column hydraulic rubber press with electrically heated upper and lower platens, hydraulic power unit and Delta touchscreen control system. Manufacturer: Uğursan Hidrolik Pres İmalatı Model: Kauçuk Pres Year: 2020 Motor power: 15 kW Electrical supply: 3 × 380 V + N + PE, 50 Hz Control system: Delta touchscreen HMI Control functions: Upper and lower platen temperature, curing time, platen position and pressure/set-weight parameters Automation system: Gani Otomasyon, project no. 14313565, rated current 109 A, maximum main fuse 125 A Configuration: Four-column frame, heated upper and lower platens and hydraulic power unit Condition: Used Approximate dimensions: 1,800 × 1,500 × 3,500 mm Approximate weight: 6,000 kg All descriptions are indicative only. Auction-ID: A1-50546-49
AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated upper press section, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,370 kg All descriptions are indicative only. Auction-ID: A1-50546-22
Technical details Type: Die-cast industrial components Material: Pressure die-cast aluminium alloy (likely) Configuration: - Precision die-cast components - Reinforced ribbed construction - Machined mounting faces - Multiple fixing holes - Uniform production batches Casting markings: - 211.2 - PO 9007 Quantity: Approx. 700–1100 pieces Packaging: - Multiple cardboard cartons Application: - Industrial machinery - Mechanical assemblies - Automation equipment - Machine frame connections - Mounting brackets and housing components Construction: - High-pressure die casting - Precision-machined functional surfaces Dimensions (per component): - Length: Approx. 130 mm - Width: Approx. 45 mm - Height: Approx. 35 mm Weight: Approx. 0.45 kg per component Condition: New old stock (unused) Observed condition: - Uniform finish throughout - No corrosion or wear visible ...
Membrane Press Loading Tables – 3 pcs. Lot 119 comprising three used loading and transfer tables designed for use with membrane presses. Each table has a heavy welded steel frame, longitudinal guide rails, cross supports, adjustable levelling feet and electrical cabling/connectors. Suitable for supporting and guiding press trays or workpiece carriers during loading and unloading. Quantity: 3 tables Manufacturer: AS Metal Condition: Used Approximate dimensions per table: 3,200 × 1,800 × 1,000 mm Approximate weight: 300 kg per table All descriptions are indicative only. Auction-ID: A1-50546-119
Baler Macpresse MAC 105, press force 70 t, year 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of Make: 2011 Hours: 23130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Filling opening: 1500 x 750 mm Bale chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Binding: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Funnel Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. ...
Technical data Maximum pressure: 60 tons Year of manufacture: 2011 Pressing force: 78 tons/m² Number of bindings: 5 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1500 x 1100 mm Bale weight: 425-575 kg Weight: approx. 21 tons Power connection: 400 V Bale tying: automatic Press capacity under operating conditions: max 370 m³ / hour Press capacity at idle: max 940 m³ / hour Theoretical throughput: to density 30kg/m³) 11 tons/hour Theoretical throughput: to density 50kg/m³) 15 tons/hour Theoretical throughput: to density 100kg/m³) 22 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably g ...
For Pellet Productions ( 3 sets available ) The sets brand new and not used Pellet mill 65-1500 Number of rollers 6 Flat-die 1500X100X 8,0 Flat-die 1500X100X10,0 With Automatic press control system, EAPR Without Drive motors
Key data: 63 t
Press force: 63 t, with drawing cushion and separate hydraulic power unit
Used TR-5 rotary tablet press. Technical Specifications - Manufacturer – Metalchem Annopol - Type – TR-5 - Number of punches – 35 - Pressing pressure – max. 10 tons - Year of manufacture – 1988 - Weight – approx. 2000 kg The machine is operational but requires repair.
Used HOESCH chamber filter press. Technical specifications: Manufacturer – Hoesch Germany Type – 40/400806/4 Capacity – approximately 0.5 m3 Filtration area – approximately 40 m2 Operating pressure – up to 0.4 MPa Frame material – polypropylene Number of frames – 41 Year of manufacture – 1988 Plate size – 800 x 800 mm Operating pressure – approximately 6 bar Electrical box with press control.
Press capacity 320 ton, with belt sander Auction-ID: A7-50851-7
Capacity 400 ton, table size 2740 x 1520 mm Auction-ID: A7-50851-10
Pressing line consisting of: Mechanical press with 800 ton capacity, table size 2600 x 1600 mm, with ABB loading/unloading robot, TECNOFIRMA WH00 piece washing system of 2020 Auction-ID: A7-50851-1
The machine is in good technical condition; testing is possible by prior arrangement. WORK TABLE (MM) 900 x 700 mm UPPER PLATEN (MM) STROKE (MM) 550 x 400 mm 600 mm DAYLIGHT (MM) RAM CYLINDER DIAMETER 900 mm 135 mm / 1 pc AUXILIARY CYLINDER DIAMETER 3550 mm / 2 pcs RAM CYLINDER DOWNWARD SPEED (MM/S) 250 mm/s RAM CYLINDER RETURN SPEED (MM/S) 250 mm/s RAM CYLINDER WORKING SPEED (MM/S) 10 - 40 mm/s MOTOR PUMP 18.5 kW 45 cc OIL TANK (LITERS) OIL (LITERS) 345 l 67 l
General Description High-pressure sewer jetting unit manufactured by ROM BV , model ECO-FIT . Designed for professional cleaning and maintenance of sewer pipelines and drainage systems using high-pressure water jetting. The unit is equipped with an integrated polyethylene water tank, Siemens PLC control system and wired remote control for efficient field operation. Technical Details Manufacturer: ROM BV Model: ECO-FIT Year: 2007 Serial number: 072203 Working pressure: 200 bar Water flow: 60 L/min Engine power: 32 HP (23.5 kW) Integrated polyethylene water tank PLC: Siemens 12/24RC Controls: Wired remote control and machine control panel Operating hours: 2,470 h Condition Used industrial condition. Equipped with complete control system and integrated water tank. Operating hours indicate normal professional use. Operational status has not been tested. Auction-ID: A7-50 ...
maximum number of results exceeded
please refine your search
2.500 € 
