press wood used for sale

PTC Torpedo Hot Water 140°C and Steam 140°C/32bar Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... - Skid on hot-dip galvanized frames with forklift tabs. The following hot water models are available: Torpedo 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW Torpedo 23/250 | 23l/min. at 250bar | Engine: Kohler KDW 1003 19kW Torpedo 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW Torpedo 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW Torpedo 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions with 680l water tank: 2,300 x 1,310 x 1,310 - Dimensions with 1000l water tank: 2,300 x 1,310 x 1,630 Bhgo2w7wfd - Empty weight: approx. 600 kg - High pressure pump: Comet RW/TW Premium - HD reel: manual or automatic with max. 1/2" or 50 m. 3/8" hose (included) - Water supply reel: manually with 50 m. 3/4" hose - Dies ...

Used pressure leave filter, made by Padovan, type G10. -filtration surface 10 m2 -filter surface for waste liquid 0,46 m2 -24 filter plates with 745 mm diameter for liquid -6 filter plates with 330 mm diameter for cake -maximal cake thickness 22 mm, volume 216 dm3 -total chamber volume 655 L -working pressure 6 bar -nominal capacity 20.000 L/h -installed power 7,5 kW -dozing pump -rotary motor 4 kW -overall diamesions: lenght 2350 mm, width 1700mm, height 2100 mm

PTC CTR-C cold water trailer similar but no dynajet, oertzen, falch, ROM, Rioned, plaid, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min. at 180bar | Petrol Engine: Honda GX690 17.7kW CTR-C 55/160 | 55l/min. at 160bar | Petrol Engine: Honda GX690 17.7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel Engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel Engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD reel: manually with max. 1/2" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Water tank: 400 l - Op ...

Force of pressure: 30 to piston stroke: 150 mm table width: 185 mm passage (S): 530 mm bore (F): distance of 140 mm cylinders - table (F1): distance 150 mm cylinder - table (F2): 1030 mm cylinder movable (M): 200 mm width (A): (B depth of 800 mm): 700 mm height 1 (C): 1775 mm height 2 (D): 1805 mm weight: 162 kg

Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building.

Force of pressure: 50T piston stroke: 200 mm table width: 260 mm passage (S): 730 mm bore (F): distance 205 mm cylinder - table (F1): distance 75 mm cylinder - table (F2): 1050 mm cylinder movable (M): 240 mm width (A): 1040 mm depth (B): 800 mm height 1 (C): 1835 mm height 2 (D): 1880 mm weight approx.: 287 kg

Plywood Press, manufactured by Siempelkamp, working sizes 2500 x 1300, 10 floors

PTC JTR-C Cold Water Trailer similar but no Dynajet, Oertzen, Falch, ROM, Rioned, Karo, ... Bhdwvn8yff - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: JTR-C 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW JTR-C 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW JTR-C 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW JTR-C 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW JTR-C 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 - Empty weight: approx. 600 kg - High pressure pump: HPP - HD reel: fixed and manual or hydraulic with max. 1/ ...

PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...

New hydraulic press brake. Pressing force: 125Tn. Working lenght: 3200mm. Distance between housings: 2650mm. Stroke of the ram: 120mm. Distance between table and ram: 415mm. Depth of throat: 320mm. Motor power: 7,5kw. Weight: 7850Kgs. Dimensions: 3300x1800x2690mm. CE.

; neu, sofort lieferbar

System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Mobile press system with belt or packing press - can be varied by hourly performance More detailed information on request!; New machine - best condition

PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only with version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW JTR-H 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW JTR-H 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions: 3,370 x 1,640 x 1,540 Cxombmv - Empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manually with max. 1/2" or 100 m. 3/8" hose (included) - Water supply ree ...

Cylinder go Hess frame press with pneumatic 3 vertical and 2 horizontal cylinder

High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...

High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Foerder quantity: 12 l/min. - Motor: Electric 4-pole 230V 2.2kW, 1400 1-min - Dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START equipment - Handle with brackets for the power cord and the high-pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm) for easy movement on steps and over uneven terrain - Manometer - Built-in professional relief valve - Delayed TotalStop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainles ...

High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Foerder quantity: 32 l/min. - Engine: Honda GX390 petrol 8.7kW - Dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Manometer - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HD hose 3/8" + 10 m HD hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles Oylbt - Pistol with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning device that is ideal for cleaning and removing pipe blockages for pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages of house ...

Pressure piece for Chamber filter press Passavant new! in the format 800 x 800, 1000 x 1000, 1200 x 1200, 1500 x 1500, 2000 x 2000 available ex stock. Special designs according to customer requirements Spare parts for filter presses / filter presses all manufacturers and models .

High pressure cleaner PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel 53hp/39.5kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 - Kerb weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as a trolly with industrial wheels - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues The following models are available: Easy Power XL D 47/400 | 47 l/min. 400 bar Easy Power XL D 38/500 | 38 l/min. 500 bar Easy Power XL D 30/600 | 30 l/min. 600 bar Ea ...

Cat.-No. 15 00059 new Measurements and Weight: Length: 1730 mm Width: 570 mm Height: 1340mm Weight: 300 kg Characteristics of the drive: Spur gear transmission: - Transmission 38 /min Screw rotational speed (output speed) 12-50 /min Electrical Data: - Power 5,5 kW - Rotational speed 1450 /min - Current consumption ~ 11A - Voltage 3/PE/400 V - Frequency 50 Hz Machine power: max. 80 kg/h of purifies rape seed Operating Instructions available All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale Visit our Web-Site: www.eurolux-ag.com

1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.

Barrel press RMH 200 Electric motor: 5.5 KW, 400 V, 50 Hz Pressure: 25 T Press cycle: 58 seconds W x D x H: 1200 x 1000 x 2800 mm

High pressure cleaner PTC Easypower XL E similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-38 l/min. - Motor: IE3 Electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 w-min or IE3 Electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Empty weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operat ...

Press Type: Twin Cavities Mold Type: Segmented Type of Tires: Passenger and Light Trucks Bead Diameter Range: 16â â 20â Closing force: 650,000 Lbs / 3680 KN Heating System: Steam Bladder System: Hydraulic Water Max. Pressure: 20 Bar Power Supply: 18.5 KW, 380 V / 50 Hz Loader: Available Controls: Simatic S7

High pressure cleaner PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Foerder quantity: 13-42 l/min. - Engine: Kohler Stage V Diesel 35hp/26kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/m ...

Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm min 350 mm Speed max 50-100 m/min ; working condition

High pressure cleaner PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Foerder quantity: 38 or 30 l/min. - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or electric 63A, 3Ph-440V-60Hz 40hp/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water suction by self-priming pump - Stainless steel relief v ...

FRICTION BELT FOR SCREW PRESS DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw presses, riveted, new! -Dimensions: 530 mm i. diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide! We confirm best service and short delivery times.

High pressure cleaner PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Foerder quantity: 21 or 15 l/min. - Engine: Vanguard 31 HP Stage V petrol 31hp/23kW, 3400 rpm - Dimensions: 1,000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - Stepless pressure valve made of stainless steel with EASY-START - Large water filter with maintenance-friendly filter cartridge - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet  ...

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

ochdruckcleaner PTC Easypower E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet , Kärcher, Dibo, ... - Operating pressure: 300-700 bar - Foerder quantity: 15-30 l/min. - Motor: Electric 32A/63A, 3Ph-400V-50Hz 20-30HP/15-22.5kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Kerb weight: approx. 180/210 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-triangle starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels 320 mm - Direct water suction by self-priming pump - Stainless steel relief v ...

Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.

Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016

The nominal gain kN 4000 Slide stroke, mm 400 Frequency Slider strokes min-1, 25 The frequency of single strokes, min-1 19 Slider travel to its lowest position, where the press develops the rated force, mm 8 The distance between table and slider in its lower position at the upper adjustment position, mm 470 Size of adjustment of distance between table and slider, mm 160 The size of the table, mm 1000x1000 The size of the slide from front to back, mm 800 Width of windows in racks mm 600 Main electric motor power, kW 37.0 Air flow, m3 / stroke 0,017 Press overall dimensions, mm left to right 3470 front to back 3140 Height above floor level, mm 5940 Weight without hydro pillow kg 32600

800 MT extrusion press 1. container size 127mm diam x 560mm lenght 2. capacity: extrusion: 800t/1000t extrusion (low tonnage) at 210kg/cm: 697M Ton Main ram forward at 210 kg/cm: 112 M Ton Main ram return at 210 kg/cm: 63 M Ton Contianer seal at 210 kg/cm: 69 M Ton Contianer open at 210 kg/cm: 94 M Ton Piercing at 210 kg/cm: 102 M Ton Mandrel return at 210 kg/cm: 63 M Ton Die slode at 210 kg/cm: 12 M Ton Stroke Main ram: 1320 mm Container: 250 mm Speed 38.0mm/sec 44.0mm/sec More information on request

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg

Upright stack delivery with pressing unit; working condition

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. weight: 2000 kg Dimensions (L/W/H): 5550x1300x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 Working height: 2500 mm : 300-800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand extrusion press Manufacturer: Loewy Type: 4 column floating - mandrel piercing press Aprox year of manufacture: 1939 Container size (dia.): 406 & 508 mm 16" and 20" Container size (length): 1350 mm Billet size (length): 1000 mm Nominal Extrusion Force: 5000 MT Nominal Piercing Force (Max): 740 MT Mandrel arresting Force floating mandrel Stroke Main ram: 2750 mm Piercer : 1200 mm

Working width: 3500 mm Working height: 2650 mm Number of cylinders: nach Wahl St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

Rotary vane compressor Manufacturer: Becker Type: VT4.25 Voltage: 400V/50Hz Performance: 12 months Status: Generalueberholt and repainted Printing capacity: 25m3/h End printing: max+ +1 bar (rel) Zubehoer: Ready to use

wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good

Multi-chamber press C400 | C600 | C800 C400 (with two pressing chambers) C600 (with three pressing chambers) C800 (with four pressing chambers) Specifications: Motor 1,5kW Electronic voltage 230V/50Hz/1-F. Maximum pressing force 6.5t Working pressure 150bar Cylinder stroke 700mm Time press cycle 50s Press chamber (LxWxH) 730x600x830mm Insertion height 1060mm Insertion opening (LxW) 730x600mm package size (LxWxH) 730x600x400mm Package weight 30-40kg Binding rolls 8x6x4x Strap type (polyester) 9mm/250m Number of containers 4x3x2x Length ges. 3455m; 2615mm; 1775mm; 17775mm Width ges. 1050mm Height ges. 1955mm Weight ges. 1955mm Weight ges. 1090kg; 880kg; 670kg; 510kg Transport dimensions C400 !x container Length 1680 mm 840 mm Width 845 mm 845 mm Height 1955 mm 1060 mm Weight ges. 210 kg Multi-chamber press C400 (with two pressing chambers) C600 ( ...

Baler, press for cardboard, film paper V5 | 5t Bale size: 700 mm H (variable) × 750 mm W × 500 mm D Bale weight: 50–100 kg Pressing time: 28 seconds Pressing force: up to 5 tons Dimensions: 2015 mm H × 870 mm W × 655 mm D Filling opening: 750 mm W × 385 mm H Integrated bale ejection mechanism Weight: 340 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification V5 SMALL BALER Versatile, efficient and simple operation: The V5 baler is ideal for small and medium-sized companies. Even with a small amount of material, it creates order, cleanliness and space. The setting of the pressing cycle on the V5 can be done either automatically or manually. With the help of the "Easy Tie" system, the finished bale can be tied quickly and conveniently when the door is ope ...