press offset used for sale

Table passage diameter [mm] 1060 Auction-ID: A1-40982-138

Auction-ID: A1-40982-50

Equipped with power current and hot water application. Operation unknown Auction-ID: A1-47446-107

Equipped with 10 crimp sets; unused Auction-ID: A1-47364-99

Auction-ID: A1-40982-40

Control Conventional Power [tonnes] 50 Max. working width [mm] 2000 Depth stop [mm] 0 Tools included Yes Auction-ID: A1-40982-100

Auction-ID: A1-40982-76

Min. stroke [mm] 13 Max. stroke [mm] 127 Table length [mm] 650 Table diameter [mm] 650 Ram width [mm] 250 Discharge [mm] 310 Max. locking height [mm] 330 Height adjustment [mm] 80 Press speed [mm/s] 235 Auction-ID: A1-40982-121

Equipped with height adjustment and various accessories Auction-ID: A1-50251-599

Capacity 135 tons Working length between uprights approx. 3600 mm Auction-ID: A1-50251-2

: neu : 2026 : 080248 : November 2026, Zwischenve : Türkei : 92932 € : 1756.41 € : 175 to : 3050 mm : Y1 / Y2 / X und R-Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 4250 mm : 1700 mm : 2850 mm : 10900 kg 4axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...

Auction-ID: A1-44050-31

Power : 1.5KW Electric motor 380V Cylinder 300mm Max press : 50 Ton Tank volume : 25L New machine Auction-ID: A1-49954-47

Key data: 50 t

Manufacturer: AMADA Model No.: HFT 50-20 Year: 2006 Condition: Used Stock number: 9544 Compressive force: 50 t Maximum bending length: 2085 mm Maximum distance between columns: 2665 mm Axis: 4 Throat depth: 420 mm Maximum ram stroke: 200 mm Machine weight: 4850 kg

Discharge m 420mm, distance between frame: 2700mm, equipped with Fiesslet AKAS Iii 150 S/HS protection. Includes 1 tool drawer cabinet and various segment bending knives; Auction-ID: A1-49889-17

Key data: 400 t

The following machines are involved: Müller-Weingarten ZE 400-16.19, 400 t double column press, approx. 1,600 × 1,300 × 1,400 mm, year of construction 1963, conversion 1991. Müller-Weingarten ZE 400-20.13.2, 400 t double column press, approx. 2,000 × 1,300 × 1,200 mm, year of construction 1977, conversion 1991.

Hydr broaching press including keyway pressure milling Auction-ID: A1-50090-5

Key data: 100 t, 2500 mm, 2050 mm

Hydraulic press brake HACO ERM 25100 Year of Make: 2005 100Tx2500 Light barrier: Fiessler AKAS Tool holder: AMADA Promecam Type A tool holder Back gauge: Controlled X-R-Z1-Z2 axles New control system 2026! Immediately available! To be viewed under power!

RETREAT POSSIBLE FROM SEPTEMBER 2026 Auction-ID: A7-50524-900

From the bankruptcy of a roofing company. With foot switch, on metal base, self-made. Auction-ID: A1-50529-273

\" General Description CNC turret punch press manufactured by AMADA , model Aries 222 . Designed for CNC-controlled punching and nibbling of sheet metal using interchangeable turret tooling. Supplied with a substantial additional assortment of punches, dies and tool holders. Technical Details Manufacturer: AMADA Model: Aries 222 Machine type: CNC turret punch press Year: 1990 (March) Serial number: 22250177 Punching force: 200 kN / approx. 20 t CNC control: AMADAN 03P Turret: 10 stations Working area: Approx. 600 × 600 mm Working area with repositioning: Up to approx. 600 × 1,200 mm Maximum mild-steel thickness: Approx. 4–4.5 mm Nominal power: 9 kVA Machine weight: 4,100 kg Included Equipment Large assortment of punch tooling Punches and dies Spring-loaded tool holders / assemblies Round, square, rectangular, slot and various profile tooling Tool storage rack ...

Frame press, CE certified according to the latest guidelines. - can be moved sideways with manual hydraulics - 2 pcs. press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs. press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 press pads pressure 20 t stroke 180 mm clear width between stands 540 x 100 mm installation height max. 990 mm cylinder diameter 72 mm piston diameter 48 mm machine weight approx. 0.12 t space requirement approx. 0.8 x 0.7 x 1.8 m Condition: never used / new (5) Auction-ID: A7-50523-787

Equipped with T-slot clamping table (550x350 mm), including HP laptop. Auction-ID: A1-44050-53

maximum stroke: 350mm, extension: 450mm, between frame: 3240mm, equipped with Fiesslet AKAS Iii 150 S/HS protection; with 2 pallets of various chamfering tools. Auction-ID: A1-49889-12

This frame press is CE certified according to the latest guidelines - with manual hydraulics - Cylinder to be moved sideways - 2 pcs. press block 200x250x40mm / 200x70x40mm, max. 30t with M16 threaded holes and some M16 threaded bolts - 8 pcs. press bolts, 10 - 30mm, with quick-change adapter, max. 20t - 2 press pads pressure 10 t stroke 180 mm clear width between uprights 335 x 115 mm installation height max. 340 mm cylinder diameter 56 mm piston diameter 40 mm Machine weight approx. 0.05 t Dimensions approx. 0.75 x 0.53 x 1.6 m Auction-ID: A7-50523-737

From the bankruptcy of a roofing company. With foot switch, on metal base, self-made. Auction-ID: A1-50529-272

max 3500 PSI, 7 hp petrol engine, unused Auction-ID: A1-40421-411

Pressure washer petrol: Drive engine petrol 4-stroke 224cc Pressure capacity 8.75 l/ min.Pressure capacity 220 bar Weight 45 kg Dimensions L x W x H 550 x 600 x 1000 mm Auction-ID: A7-50523-828

General Description Mechanical stamping press manufactured by ILR , designed for heavy-duty metal forming and stamping operations. The machine has been fully modernized with a PLC control system and is suitable for manual or automatic operation with a sheet feeder. Technical Details Manufacturer: ILR Machine type: Mechanical press Year of manufacture: 1972 Year of refurbishment: 2024 Press force: 250 t Stroke rate (manual): 45 strokes/min Stroke rate (automatic): 20 strokes/min Table size: 1,120 × 740 mm Stroke: 400 mm PLC-controlled digital operating system Operating modes: • Automatic with sheet feeder support • Foot pedal control • Two-hand control Safety light curtains installed Condition Used industrial condition. The machine was refurbished in 2024 and upgraded with a modern PLC control system. Equipped with safety light curtains and multiple operatin ...

230 volts, 1800 watts, 140 bar max, 5.5L/min Auction-ID: A1-40421-141

Extension: 420mm, distance between frame: 3760mm, equipped with Fiesslet AKAS Iii 150 S/HS protection Auction-ID: A1-49889-15

230 volts, 1800 watts, 140 bar max, 5.5L/min Auction-ID: A1-40421-260

230 volts, 1800 watts, 140 bar max, 5.5L/min Auction-ID: A1-40421-88

Distance between the front columns 2100 mm and distance between the side columns 1100 mm. Additional table size 1820 × 1500 mm. Cylinder diameter 250 mm. Main table size 2600 x 1800 mm. Including REGLOPLAS 300LD temperature controller Auction-ID: A7-50524-927

General Description Fully automated robotic press brake bending cell manufactured by AMADA , model ASTRO II 100 NT / HDS 1030 . Designed for automated sheet-metal bending with robotic workpiece loading, positioning, manipulation and unloading. The system combines an AMADA HDS 1030 press brake with the ASTRO 100 NT robotic handling system. Technical Details Manufacturer: AMADA Model: ASTRO II 100 NT / HDS 1030 Machine type: Robotic press brake bending cell Year: 2007 Serial number: 20306066 Press capacity: 100 t / approx. 980 kN Bending length: Approx. 3,000–3,110 mm Distance between uprights: 2,700 mm Stroke: 200 mm Throat depth: 415 mm Control: AMADA AMNC PC / AMNC II generation Robot: Yaskawa Motoman YR-HP20-A63 / ASTRO 100 NT system Robot payload: 20 kg Robot manufacture: November 2007 Automatic workpiece loading and handling Automatic multi-stage bending Automa ...

Key data: 130 t, 3000 mm

Sell a well-preserved CNC Hydraulic Press Brake from Trumpf Model V130. The dimensions of the machine are LxWxH 1900mm x 3800mm x 2950mm. The weight is about 13000kg. The edge length is 3000mm. Incl. a set of tools. If you have any further questions, please contact us. The machine can be viewed under power by prior appointment. The sale is without guarantee and warranty. Returns are excluded. All information without guarantee.

For sale is a RUF 5.5/83700 with 60x40mm briquette size used for steel. Machine is in very good condition. Power requirement is 400V AC 11kW 32Amp. Control system is Siemen's S7-200

: neu : ca. 10 Wochen ab Auftrags : Türkei : 16100 € : 309.12 € : 100 to : fix : 300 mm : 680 mm : 1020 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2350 mm : 1985 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 HAND CONTROL AND FOOT PEDAL table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 € : 339.84 € : 100 to : fix : 300 mm : 680 mm : 1520 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2350 mm : 2500 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 7700 € : 148.61 € : 80 to : horizontal verschiebbar : 250 mm : 1040 mm : 865 mm : 200x120 mm : 5 mm/s : 10 mm/s : 1710 mm : 700 mm : 2100 mm : 835 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070240 : Oktober 2026, Zwiswchenve : Türkei : 8300 € : 160.19 € : 1 : 100 to : horizontal verschiebbar : 300 mm : 1070 mm : 5 mm/s : 10 mm/s : 2110 mm : 1000 mm : 2430 mm : 1500 kg demo machine / mint condition net price (price for new machine € 9.000,00) horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070168 : prompt, Zwischenverkauf v : Türkei : 10900 € : 209.28 € : 1 : 150 to : horizontal verschiebbar : 300 mm : 1070 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2110 mm : 1000 mm : 2480 mm : 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 7321 : prompt, Zwischenverkauf v : Türkei : 12500 € : 216.96 € : 1 : 11300 € : 150 to : horizontal verschiebbar : 300 mm : 1570 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2630 mm : 1000 mm : 2480 mm : 2100 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 5000 € : 117.73 € : 40 to : fix : 900 mm : 900 mm : 1600 mm : 700 mm : 2050 (PSS: 2250) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 40 TL: 1 speed 4 mm/s, single-hand control with lever € 5.000,00 PSS 40 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 5.800,00 PSS 40 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 6.100,00 PSS 40: same as PSS 40 NC but with stroke 500 mm € 7.000,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 61200 € : 1156.68 € : 80 to : 4 mm : 600 mm : 900 mm : 200 mm : 1 - 110 mm : 60 1/min : 6 : 80 mm : 50 mm : 300 mm : 400 mm : 7.5 kW : 1600 mm : 1500 mm : 2750 mm : 5700 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 74300 € : 1404.27 € : 100 to : 4.5 mm : 700 mm : 1000 mm : 210 mm : 1 - 132 mm : 58 1/min : 6 : 90 mm : 60 mm : 300 mm : 445 mm : 7.5 kW : 1650 mm : 1545 mm : 3011 mm : 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7", touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00 The data for this ad was cr ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 87700 € : 1657.53 € : 130 to : 4.5 mm : 650 mm : 950 mm : 220 mm : 1 - 132 mm : 50 1/min : 6 : 95 mm : 70 mm : 325 mm : 500 mm : 11 kW : 1800 mm : 1725 mm : 3020 mm : 8000 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting periph ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 97600 € : 1844.64 € : 160 to : 6 mm : 750 mm : 1100 mm : 230 mm : 1 - 172 mm : 45 1/min : 6 : 100 mm : 80 mm : 375 mm : 540 mm : 11 kW : 1890 mm : 1950 mm : 3650 mm : 15500 kg Welded steel frame construction 8-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Hydraulic overload protection Two-hand and foot pedal operation Manual stroke adjustment Motorized ram adjustment Variable stroke rate via frequency converter Operating modes: Adjustment mode Two-hand release Foot release 2-stroke operation via light barriers Continuous operation Touchscreen for Stroke counter with preselection for continuous operation Stroke rate adjustment Lubrication intervals and duration Alarm messages Motor direction of rotation Monitoring of inputs and outputs 2 free cams for connecting perip ...

: neu : ca. 4 Monate ab Auftragse : Italien : 31200 € : 595.92 € : 100 to : horizontal verschiebbar : 500 mm : 700 mm : 1550 mm : 25 mm/s : 2 mm/s : 2400 mm : 1200 mm : 2450 mm : 1960 kg HORIZONTAL MOVABLE CYLINDER 1.050 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 25200 € : 481.32 € : 100 to : fix : 500 mm : 700 mm : 1050 mm : 25 mm/s : 2 mm/s : 1900 mm : 1200 mm : 2450 mm : 1300 kg 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.