press offset used for sale

pressure: 4000 t stroke: 380 mm dayligth: 1050 mm distance between columns: 1580 mm table-size: 1520 x 1600 mm dimension of ram: 1470 x 1500 mm ram adjustment: 15 mm strokes of ram per min.: 50 ejector path: 31 / 70 mm main drive: 200 kW height over floor: 7520 mm total power requirement: ca. 250 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 4,4 x 4,6 x 7,5 m complete forging line includes an - Smeral Hot Forging Press - induction heater - Manyo 460-millimeter forging roll - manipulator with forging roll link - SMERAL 500-ton trimming press The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 50 mm bending angle max. +/-: 180 ° bending radius max.: 350 mm bending speed: 3 U/min motor speeds:: 2815 U/min bending radius max.: 350 mm bending angle max. +/-: 180 ° tool taper: Sechskant 40 mm total power requirement: 2,2 kW weight of the machine ca.: 0,1 t Machine Type Electric Bending Machine Model 6000-S Power Connection 3-phase 400 V Control System JUTEC electronic, programmable bending control with display and membrane keypad Operation Foot switch for clockwise/counterclockwise rotation and bending operation Design Mobile machine on swivel casters The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: ca. 60 mm tool taper: Sechskant 40 mm bending device: horizontal bending speed: 3 U/min weight of the machine ca.: 120 kg total power requirement: 2,2 kW Electronic bend angle control Digital display and keypad Operated via dual foot switches Mandrel-less bending Mobile machine base Pipe diameter range likely up to Ø 60 mm Tool mounting via hexagonal shank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PLATEN size mm. 3100 x 1300 Pressure cylinders with deep-chromed stems Cylinder stroke mm. 510 6 Cylinders Max opening between the platens mm. 510 Hydraulic unit installed power Kw. 2,2 Upstroke movement of bottom platen Pressure gauge to adjust pressure setting Automatic pressure recovery Press opening controlled by pushbutton Self-lubricating corner sliding-guides for platen movement

225x127x155 No keys available for shutters No coc present Trailer 750kg Auction-ID: A3-46124-11445

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-46126-1169

Manufacturer: KAISER Model: V200 WR Year: 1983 Condition: Used Stock Number: 9535 Compressive force: 200 t Table length: 1450 mm Table width: 900 mm Maximum stroke rate upper table: 150 1/min Adjustment of the ram: 100 mm Ram stroke: 20-120 mm Equipment: Sheet metal straightening roller Unwinder Workpiece feeding

Brand: Metaleen Tools & Equipment (visible on the frame of the machine). Type: WE67K-160T/3200. Year of manufacture: 2025, deduced from the serial number/order date. Serial number: 2025040195. Capacity t: 160 tons. Working length mm: 3200 mm. Control, brand, type: Delem DA-53T-[N], serial number 244400017, Delem PN D8087-007, software version V1.8.23, produced by Delem, Eindhoven (NL). Auction-ID: A3-46126-11241

Auction-ID: A1-50275-100

Hydraulic punching machine suitable for punching and processing aluminum profiles and parts. Professional industrial execution. Machine originating from an aluminum processing company and used for the production/processing of aluminum windows, doors and structures. Auction-ID: A3-46126-22082

garage press Type: Hydraulic Workshop Press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 98 kg Condition: Unused Auction-ID: A3-46126-1149

Self-made high-pressure cleaner powered by gasoline engine. 1000L Water Tank Incl. hose reel and washing lance. Transport rack can either be placed permanently on a trailer, or wheels can be attached to the bottom, sides can be covered by yourself. Fully functional and ready for use. (Gasoline & water must be filled ;-) ) Auction-ID: A1-50398-11

51x R900595739 Bosch-Rexroth Auction-ID: A1-50275-61

Raskin mechanical press manufactured in Angleur (Belgium). Estimated capacity of 35 tons. Heavy cast iron machine equipped with flywheel, grooved table and mechanical clutch. Sold in the condition visible in photos. Ideal for punching, light cutting, stamping or workshop work. Auction-ID: A3-46126-35825

Auction-ID: A1-50275-111

Slaan: - 29 x 15 mm - 34 x 12 mm - 20 x 20 mm - 57 x 8 mm Scheren: - 230 x 20 mm - 375 x 10 mm Hoeksnijden: - 90°: 130 x 13 mm - 45°: 75 x 10 mm Doorsnede snijden: - rond: 45 mm - vierkant: 45 mm - C amp; I profiel: 127 mm Inkepingen: - rechthoekig: 45 x 100 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: dia 29 x 15 / dia 57 x 8 mm Max punching dia: dia 160 mm Power needed: 5,5 kW Length: 1640 mm Depth: 710 mm Height: 1780 mm Weight: 1570 kg

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3670 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 4330 mm Depth: 1950 mm Height: 2980 mm Weight: 17 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 150 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3750 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4700 mm Depth: 1700 mm Height: 2850 mm Weight: 11 ton

Haco ERMS 230 ton x 4300 mm CNC Capacity: 230 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 180 mm Locking speed: 200 mm/sec Working speed: 8 mm/sec Returning speed: 125 mm/sec Electric motor (power): 19 kW Length: 4320 mm Depth: 2000 mm Height: 2800 mm Weight: 15 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 3500 mm Depth: 1700 mm Height: 2500 mm Weight: 8 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 12 kW Length: 3270 mm Depth: 1500 mm Height: 2460 mm Weight: 8 ton

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 15 kW Length: 4270 mm Depth: 1500 mm Height: 2530 mm Weight: 11,5 ton

3 assen: Y1 / Y2 / X bovenste en onderste Amada-systeemtooling Gerenoveerd door Haco in 2024 Capacity: 135 ton x 3600 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4200 mm Depth: 1700 mm Height: 2500 mm Weight: 9 ton Capacity: 135 ton Bending length: 3100 mm

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3700 mm Electric motor (power): 15 kW Weight: 18 ton Capacity: 200 ton Bending length: 4300 mm

pressure: - t distance between columns: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Digital pressure transmitter with oil-free ceramic membrane for measurement in gases and liquids for measuring pressure, level, volume or mass. Signal output 4-20mA, voltage 11.5-45V DC, measuring range up to -1/0 ... 40 bar. Connection DN50 flange.

Digital pressure transmitter with oil-free ceramic membrane for measurement in gases and liquids for measuring pressure, level, volume or mass. Signal output 4-20mA, voltage 11.5-45V DC, measuring range up to -1/0 ... 40 bar. Connection DN50 flange.

Digital pressure transmitter with oil-free ceramic membrane for measurement in gases and liquids for measuring pressure, level, volume or mass. Signal output 4-20mA, voltage 11.5-45V DC, measuring range up to -1/0 ... 40 bar. Connection DN50 flange.

MODEL SL-150 Power t 150 Motor power kw 4 Piston stroke mm 250 Working speed mm/s 3.1 Return speed mm/s 4 Head displacement mm 1,000 Front light mm 1,500 Side light mm 340 Max. vertical span mm 955 Bed light mm 405 Total front mm 2,150 Total side mm 1.180 Total height mm 2.805 Weight kg 2.350 STANDARD DESCRIPTION: The S-series hydraulic presses are specially designed for extraction, casing and straightening work. They work with a hydraulic pressure of less than 320 bar, which guarantees greater durability of the entire hydraulic system. STRUCTURE: They consist of an electro-welded structure with four uprights with open sides. They are equipped with a movable bed that allows it to be positioned at different heights. The fixing is done by means of two pins located at the bottom of the bed. The raising and lowering system is carried out by means of cha ...

The machine is in good technical condition; it can be tested by prior arrangement.

The machine is in good technical condition; it can be tested by prior arrangement.

STANDARD FEATURES: Power 50 t Motor power 1.5 kw Working speed 2.25 mm/s Return speed 4.50 mm/s Maximum pressure 500 bar Piston stroke 150 mm Spindle stroke 120 mm Front light 800 mm Side light 160 mm Max. vertical span 1,020 mm Bed light 205 mm Total front 1,090mm Total side 900 mm Total height 2,000 mm Weight 295 Kg. Specially designed for extraction, bushing, straightening, etc. The hydraulic presses of the S series consist of a four-pillar electro-welded structure with open sides. They have a movable base that allows it to be positioned at different heights. The fixing is by means of two pins located at the bottom of the bed. The raising and lowering system is by means of chains driven by the cylinder of the press. SD Models: are fixed head. Double-acting cylinder with chrome-plated plunger and anti-wear guides. It is equipped with a removab ...

Manufacturer: ERFURT Model: PKnT 160 Year: 1978 Condition: Used Stock number: 9542 Compressive force: 160 t Maximum stroke rate upper table: 15 1/min Ram stroke: 200 mm Adjusting the ram: 130 mm

TJF-GARNET SPECIAL HYDRAULIC PRESS: Hydraulic press with double upright equipped with two side cylinders joined by a plate for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and stalling of the rotor shaft, as well as the extraction of shafts in case of repair. It has a removable table for the stacking and handling of rotors and stators. MAIN CYLINDERS 150 TN.  2 hydraulic cylinders of 75 Tn. of power each, with a stroke of 1200 mm joined by a grooved plate, with a central bore of 250 mm in diameter.  Maximum useful height cylinder plate of 1550 mm.  Minimum useful height cylinder plate of 350 mm. ABSTRACTION CYLINDER  1 central cylinder of 80 Tn of power with 1200 mm stroke.  Prepared to adapt abstraction clamp, end of threaded stem to M 35,150 x 40 in length.  Maximum useful height ...

USED GAMEI OBR-40 ECCENTRIC PRESS FEATURES: - Clutch-brake is electro-pneumatic actuated, equipped with a double safety solenoid valve and cross-flow flows. - Centralized automatic lubrication with progressive programmable lubrication system. - Two-handed push button operation and low-voltage electric pedal. MODEL OBR-40 Rated capacity kn/tn 40tn Adjustable stroke 10-85 mm Hits x Min. 125 Lower table 800 x 430 mm Top table 420 x 200 mm Turtleneck "Neckline" 240 mm Vertical span between tables 335 mm Working height 850 mm Sliding spindle regulation 50 mm Main motor 3 kW

USED GAMEI OBR-140 ECCENTRIC PRESS FEATURES: MODEL OBR-140 Nominal capacity 140tn Strokes per minute 90 approx. Adjustable stroke 17-142 mm Lower table 1,140 x 770 mm Top table 480 x 800 mm Vertical span between tables 650 mm Working height 945 mm Sliding spindle regulation 140 mm Main motor 11 kW It can be supplied with or without CE adaptation.

Key data: 1250 t

Manufacturer: Dieffenbacher Model: PO-F 1250 A Year: 1979 Condition: Used Stock number: 9543 Control system: Siemens Simatic HMI Compressive force: 1250 t Table length: 1250 mm Table width: 1250 mm Stroke: 630 mm The general overhaul was carried out in 2015.

pneumatic; mounted on profile steel base; including pallet; Auction-ID: A1-44050-81

Control CNC Power [tonnes] 70 Min. stroke [mm] 10 Max. stroke [mm] 90 Auction-ID: A1-40982-125

ROVETTA FO-200 ECCENTRIC PRESS FEATURES: FO-200 MODEL Nominal capacity kn/tn 200Tn Fixed stroke 200 mm Tables 730 x 810 mm Span between uprights 760 mm Hits minute 65 Vertical span between tables 450 mm Working height 800 mm Sliding "Spindle" regulation 100 mm Main motor 11 kW Stroke pneumatic cushion 100 mm Pneumatic cushion force 25tn WE ALSO HAVE THE FO-300, PLEASE SEE.

USED GAMEI FRICTION PRESS Rated capacity kn/tn 300tn Pitch between uprights 700 mm Lower table 550 x 610 mm Top table 475 x 410 mm Vertical light between tables 670 mm Working height 640 mm Main motor 22 kW

Serial Number 4414 Control Conventional Power [tonnes] 63 Min. stroke [mm] 8 Max. stroke [mm] 100 Table length [mm] 800 Table width [mm] 560 Ram width [mm] 300 Auction-ID: A1-40982-29

High Pressure Piston Pump Flow Water Pump Manufacturer: UDOR Type: GAMMA 162 TS 1C More information can be found on the manufacturer's website, see pictures. Condition : Used, fully functional Scope of delivery : see the pictures.

Auction-ID: A1-40982-141

Can't refer to press brake. Since X and R axis are stuck. Auction-ID: A1-40982-135

Edge press STEGHERR defective, as a spare parts carrier! Electricity: 230V + compressed air required Usable length: 250 cm incl. 2 heating rails The connection of the heating rail is defective! Function of the electrical system not known. Press proceeds pneumatically. The machine is therefore offered as defective or as a spare parts carrier. Fixed price.

steel; shut-off valve; lifting eye; pressure reading; Auction-ID: A1-44050-32

Auction-ID: A1-47364-43

With SCHARDES storage rack Pump pressure 150 Bars Max water flow rate 750 l/h Electric boiler Ceramic piston Steel Chassis Auction-ID: A1-50490-8

GSR Cocoa machinery Vertical press for filter mounting GSR Cocoa Butter Press Attachment Auction-ID: A1-50490-33