137,478 used machines on RESALE, but how to find them? Machine Search
: neu : ca. 10 Wochen ab Auftrags : Türkei : 112800 € : 2131.92 € : 220 to : 3050 mm : Y1 / Y2 / X und R Achse : 265 mm : 2600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 12 mm/s : 180 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 11 kW : 4250 mm : 1770 mm : 2900 mm : 12250 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces fo ...
: neu : ca. 4 Monate ab Auftragse : Italien : 92000 € : 1738.8 € : 200 to : 500 mm : 2.500 x 2.050 mm : 800 mm : 20 mm/s : 2 mm/s : 2950 mm : 2500 mm : 2600 mm : 6500 kg : horizontal verschiebbar : 2050 mm : 1450 mm : 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software sol ...
: neu : ca. 4 Monate ab Auftragse : Italien : 80000 € : 1512 € : 200 to : 500 mm : 2.000 x 1.550 mm : 800 mm : 20 mm/s : 2 mm/s : 2400 mm : 2000 mm : 2600 mm : 4800 kg : horizontal verschiebbar : 1550 mm : 1000 mm : 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solut ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 127400 € : 2407.86 € : 220 to : 4050 mm : Y1 / Y2 / X und R Achse : 265 mm : 3600 mm : 410 mm : 530 mm : hydraulisch : 200 mm/s : 12 mm/s : 180 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 5250 mm : 1770 mm : 2900 mm : 15000 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 104800 € : 1980.72 € : 150 to : 500 mm : 950 x 650 mm : 1200 x 750 mm : 750 mm : 100 mm/s : 5,5 mm/s : 165 mm/s : 11 kW : 2200 mm : 2200 mm : 3650 mm : 9500 kg : 254 bar : 32 to : 200 mm : 120 mm : 160 bar : 40 mm/sec. : 720x540 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 102300 € : 1933.47 € : 80 to : 2550 mm : 4 : 320 mm : 2840 mm : 500 mm : servomotorischer Riemenan : 105 mm/s : 10 mm/s : 105 mm/s : 650 mm : 250 mm : 3700 mm : 2200 mm : 2550 mm : 6400 kg Electromotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66S - 2D touchscreen display 17 - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guar ...
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 114100 € : 2156.49 € : 135 to : 3050 mm : 4 : 320 mm : 3340 mm : 500 mm : servomotorischer Riemenan : 100 mm/s : 10 mm/s : 100 mm/s : 650 mm : 250 mm : 4200 mm : 2200 mm : 2550 mm : 7300 kg servomotor drive with multiple switched flat belt system 4 axes (Y1, Y2,X, R) CNC control DELEM DA-66S - 2D touchscreen display 17 - 3D visualisation in simulation and production - intuitive touch-screen control (simple drawing of the bending outline with your finger) - simple and convenient data transfer - multi-simulation option - user friendly programming in dialogue form - graphic simulation of the bending sequence servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) safety device BLVT light guard ...
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 292300 € : 600 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 510 mm : 700 mm : hydraulisch : 80 mm/s : 6,5 mm/s : 80 mm/s : 750 mm : 280 l : 2 x 11 kW kW : 7600 mm : 2650 mm : 3950 mm : 52500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 123713 € : 2338.18 € : 320 to : 4050 mm : Y1 / Y2 / X Achse : 365 mm : 3600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 18.5 kW : 5250 mm : 1770 mm : 2850 mm : 20000 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 52400 € : 990.36 € : 60 to : 1250 mm : 3 (Y1, Y2, X) : 265 mm : 1050 mm : 450 mm : 530 mm : hydraulisch : 200 mm/s : 10 mm/s : 110 mm/s : 650 mm : 500 mm/s : 900 mm : 104 mm : 100 l : 7.5 kW : 2300 mm : 1550 mm : 2850 mm : 4700 kg Standard accessories: 3 axes (Y1, Y2,X ) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear gu ...
: neu : ca. 4 Monate ab Auftragse : Italien : 117000 € : 2211.3 € : 125 to : 500 mm : 800 x 400 mm : 900 x 600 mm : 600 mm : 300 mm : 115 mm/s : 42 mm/s : 7 mm/s : 70 mm/s : 15 kW : 1400 mm : 1950 mm : 2600 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 79500 € : 1502.55 € : 60 to : 500 mm : 700x350 mm : 700x500 mm : 600 mm : 250 mm : 120 mm/s : 38 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1500 mm : 2350 mm 4 guides for the slide T-slots in the table Rexroth hydraulic unit Monitored electrovalves Air/oil heat exchanger Pressure switch Double pushbuttons control Stroke adjustment by limit switch microns Siemens CPU Lateral fixed protrection grates CE certification following ",IV enclosure", OPTIONS(prices on request): Blank holder Prismatic guides Frontal light curtain CNC control Siemens with touchscreen Hydraulic pump with variable flow Proportional valves Lateral sliding guides with security microns The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : Türkei : 70700 € : 1336.23 € : 100 to : 600 mm : 900 x 500 mm : 800 mm : 400 mm : 220 mm/s : 1 - 20 mm/s : 250 mm/s : 14,65 kW : 1900 mm : 1700 mm : 4400 mm : 6000 kg : 30 - 239 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Cooler Siemens electrical components 8 additional signal inputs and outputs 10-inch touchscreen PLC Siemens S7 1200 Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or SickTwo-hand control panel Reset and emergency stop buttons Equipped according to CE regulations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 62500 € : 1181.25 € : 150 to : 500 mm : 800x400 mm : 900x600 mm : 500 mm : 300 mm : 20 mm/s : 3 mm/s : 4 kW : 2200 mm : 1500 mm : 3000 mm : 5500 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual 4-fold round guidings € on Request Light barrier € on Request Siemens control for programming of stroke and press time € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Deompression valve € on Request Oil c ...
: neu : ca. 4 Monate ab Auftragse : Italien : 25000 € : 480 € : 70 to : 500 mm : 700x500 mm : 600 mm : 25 mm/s : 5 mm/s : 4 kW : 1400 mm : 900 mm : 2250 mm : 1900 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 31400 € : 599.74 € : 100 to : 500 mm : 800x600 mm : 615 mm : 26 mm/s : 4 mm/s : 4 kW : 1600 mm : 900 mm : 2300 mm : 3100 kg 2 speeds adjustable max. pressure manomete The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 103500 € : 1956.15 € : 150 to : 500 mm : 1250x1000 mm : 600 mm : 23 mm/s : 4 mm/s : 5.5 kW : 1520 mm : 1270 mm : 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - ...
pressure: 25 t throat: 220 mm stroke: 8 - 80 mm mm total power requirement: 2,2 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 0,9 x 1,5 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 16 t throat: 210 mm stroke: 8-68 mm table:: 480 x 380 mm strokes per minute: 150 ram adjustment: 50 mm total power requirement: 3 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 315 t stroke: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 400 mm stroke: 355 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180/360 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of Make: 1998 Operating voltage: 3 AC 400 V Control voltage: 230 V Temperature range: 5 – 40 K (ambient temperature) Current Type: 3 PEN ~ 50 Hz Rated current of the system: 12 A Connected load: 5.2 kW Degree of protection: IP 54Mass (weight): 0.85 t (850 kg)
Pressure and differential pressure switches, transmitters, monitors, sensors, differential pressure indicators, differential pressure switches -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 4 ADS-10 -Pressure: max. 25 bar -Quantity: 2x P/N 1089 0416-01 / 1x P/N 1089 0416-02 (see photos for connections) -Dimensions: 125/105/H85 mm -Weight: 0.9 kg/pc.
A deck press, also suitable for the production of armor plates Make: Becker&Van Hüllen Pressing force 5000 tons 10 floors heatable 3.0 meters x 1.30 meters Control New from Stadthagen
pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: DELEM feed down: 100 mm/sec feed bending: 10 mm/sec total power requirement: 15 kW weight of the machine ca.: 11.700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 4000 mm Working height: 2550 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H: 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for mortise and tenon corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550 mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure p ...
PRESSURE GAUGE DK-T-6x12-1/2PT DENKI BIMETAL THERMOMETER MODEL: DK-6x12-1/2PT(0-200C) RANGE: 0-200C/F DIAL SIZE:6", STEMLENGTH: 12" Location: F8A Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...
PRESSURE TRANSMITTER MODEL : MBS 3000-2011-A1AB08 OUTPUT 4-20 MA PRESSURE 0-10 BARG G 1/2" Location: F8A Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th
used
Key data: 200 t, 3100 mm
Bending capacity 200 ton Bending lenght 3100 mm Number of axes 4
Pressure sensor, pressure transmitter, pressure transducer -Condition: Original packaging very good -Manufacturer: WIKA, Pressure transmitter type Transmitter S-11 -Measuring range: 0-600 mbar -Input: 10-30 VDC -Output: 4-20 mA -Thread: 1 inch -Quantity: 1 sensor available -Price: per piece -Cardboard dimensions: 180/80/H60 mm -Weight: 0.4 kg
Description Item # 9369 - COCOA BUTTER PRESS FILTER HOLDING PLATE Manufactured by GSR (Italy) Vertical Press for the filter holding plate mounting Model PMT Year 2013 1.1kW, 400Volts, 50Hz The press for the filter holding plate mounting series PMT has been designed to ensure an easy, fast and correct assembly of the filter cloths on the filter-holding plates, essential condition to guarantee a longer life of the filter cloths. This specific equipment ensures the centering of the filter cloths with respect to the plate, a proper positioning of the cloth as well as the insertion of the Teflon cord to be pressed in the seat, through an hydraulic group, for a perfect fastening of the cloths on the plate with an even tension. The double push button station with simultaneous activation system ensures a safe use in compliance with the most restrictive safety rules
Baler Presona LP 85 VH2, built in 2018, including spare parts package Technical data: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Bonding 5-fold vertical, (3-fold horizontal) Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg Materials: paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operations. The following work was carried out by us: New wear plates in the press channel Gasket completely replaced on the master cyl ...
Offer 26222 Technical data: - Pressure capacity 200 t - Working width 4100 mm - Passage between the uprights 3050 mm - Table width 220 mm - Projection 500 mm - Installation height 550 mm - Feed speed 80 mm/sec. - Working speed 0 to 7 mm/sec. - Retraction speed 70 mm/sec. - Plunger stroke 300 mm - Pneumatic connection - Drive 400 V / 18 kW - Space requirement approx. W 4800 x H 3150 x D 2200 mm - Weight approx. 17000 kg - with: - Swivel arm – control panel with control DELEM DA 65 Bj.2009 - Safety light barrier - Mot. Backgauge - Sharpening tool + universal die - Two-hand control panel with foot switch,
Plate dimensions: 2.200 x 1.250 mm Daylight opening: 400 mm Number of daylights: 1 St. Heating: Elektrisch Specific pressure: 2,2 kg/cm² Total pressure: 60 to Motor output: 0,75 kW Dimensions (L/W/H): 2.750 x 1.380 x 1.785 mm weight of the machine ca.: 3.000 kg safety device: Notausseil The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke of upper beam: 300 mm dayligth: 570 mm working feed: 21.0 mm/sec return speed: 200.0 mm/sec work height max.: 970 mm Control: PPS-TS Touch total power requirement: 37.0 kW weight: 27500 kg range L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Special price upon request Equipment: - CNC electro-hydraulic press brakes Intuitive, touchscreen-based user interface Easy navigation Tool and program library Control system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26235 Technical data: - Working width 4100 mm - Pressure capacity 170 t - Passage between the uprights 3600 mm - Projection 400 mm - Max. installation height approx. 400 mm - Plunger stroke 225 mm - Working height approx. 920 mm - Motor power approx. 18 kW - Oil filling approx. 300 l - Space requirement approx. W 4800 x H 2750 x D 2300 mm - Weight approx. 12500 kg - with: - Swivel arm – control panel with ESA control - for 4 axes Y1 + Y 2 , X , Z - Mot. Backgauge with mot. controlled height adjustment - Cambering - Safety – light barrier - 4-fold Univ. matrix + divided. Deer foot tool 4000 mm - Sharpening tool 4000 mm - Deer foot tool 3000 mm - V – Die 3000 mm - E.- Footswitch, - Support arms can be moved sideways
Features: Volume 3150 L Material No. V2A Max. operating overpressure 0.99 bar Total height 3000 mm Diameter 1300 mm Outer diameter 1400 mm Surface inside 2B=IIIC ground Surface outside 2B=IIIC ground Working temperature 20 C Cylinder length 2000 mm Description: Topsoil: Clapper bottom Threaded nozzle DN40 central Threaded nozzle DN40 side Check valve Cylinder: Manhole 440 x 340 oval Sample tap DN15 Ladder hooks Downward-swept CIP line DN40 with disc valve and pressure gauge Threaded welding nozzle DN25 with disc valve Cooling coil with inlet and outlet 3/4" Blind Cover Flange Neck DN125 Underbody: Clapper bottom/ curved back forward-drawn residual drain pipe with disc valve DN50 flush with the tank wall 3 profile feet with calottes - height adjustable
Motor Power 200 kw Dics diameter 6 mm Used for wood pellet production Can be inspected under power
Hello, we offer you a Erfurt Crank Press, PKZZ 1V 500 Pressing force 500 tons Width between the uprights 2800 x 2800 mm Lifting of the ram 500 mm Adjustment of the ram 500 mm Distance between table and ram 1100 mm Table Sliding Table Table Surface 2800 x 2800 mm Technical information on request.
We offer you a Two-column crank press ERFURT Type. PKZZ1V 500 Pressing force. 500 tons Working area 2810 x 2850 mm Sliding table 2800 x 1500 mm
We offer for sale . Two-column crank press ERFURT PKZZ 1V 500/2800 TS Pressing force 500 tons Working area 2800 x 2850 mm max. tool installation height 1100 mm
Offer is a Weingarten crank press Type. ZS 1600.32 ex location for sale. The technical data can be found in the photos.
Qty. 1 Second-hand extrusion press Mfc.: UBE Force: 8000 MT Built: 2001 Stopped: 2015 Billet dia.: 450 -560 mm Length: 500 – 1600 mm Max. extrusion pressure: 28.7 MPa, 80.39 MN (26.8 MPa, 70 MN)
Manufacturer: Wemhoener Model: DEK 06 Type of Machine: Single-Level Short-Cycle Press Year of Manufacture: 2001 Condition: Good condition, still produces occasionally Press Counter: currently 13.65 million pressings Technical Specifications: - Heating plate format: 5,700 x 2,300 mm - Plate format capacity: 5,600 x 2,220 mm - Total press pressure: 49,728 kN - Specific press pressure: 400 N per square centimetre - Working pressure: 320 bar - Maximum operating temperature: 220 degrees Celsius - Required drive power: 63 kW - Operating voltage: 400 V, 50 Hz - Tank filling: 2,000 / 4,000 litres - Pump type: 2xA2F032/61L-P6H4-2x/050R - Secondary heating medium: thermal oil - Electrical control: Siemens S7/400 PLC Output and Capacity: - Minimum cycle time: 20 seconds, equal to 180 cycles per hour in single-format setup - Minimum cycle time: 25 seconds, equal to 144 cycles per hour in do ...
Type EURO SPECIAL Max. working width: 3250 mm Max. working height: 1850 mm 4 vertical + 2 horizontal hydraulic cylinders. Motor power of hydraulic unit: 1.5 kW 380 V Made in Germany 1978 Transport dimensions 4100x1100x2700 mm Weight 980 kg Price 2350 Eur (EXW Jonava, Lithuania)
Hydraulic press manufactured in 1980. This FRITZ MULLER ZAE 400-25.1.1 features a substantial press force of 400 t and a table size of 4,500 × 2,500 mm. The ram and additional clamping plate size is 4,500 × 2,500 mm, with a ram stroke of 1,490 mm, providing robust performance for various applications. The travelling table supports a maximum load of 60 t. If you are looking to get high-quality pressing capabilities, consider the FRITZ MULLER ZAE 400-25.1.1 machine we have for sale. Contact us for further details.
The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible.
used
Offer 26697 Technical data: - Pressure capacity 320 t - Working width 3050 mm - Passage between the uprights 2550 mm - Projection 460 mm - Installation height approx. 630 mm - Plunger stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - with: - swivel arm – control panel with control - CYBELEC EVA-10S ; Y 1 + Y 2 ; X , R , Z - Mot. Backgauge - Mot. Crowning - Safety – light barrier - E. footswitch - 4-fold universal die split - V – Matrices - Split sharpening tool set, various other tools
maximum number of results exceeded
please refine your search
