press line used for sale

Case IH Puma 240 CVX 4WD tractor – 2019 – 9,475 hrs – Dutch registration Specifications: Brand/type: Case IH Puma 240 CVX Year of construction: 2019 Engine: 6-cylinder diesel engine Power: approx. 177 kW / 240 hp Hours: approx. 9,475 hours Transmission: CVX, stepless Top speed: 50 km/h PTO: 540/540E/1,000/1,000E rpm Front tyres: Trelleborg 600/60R30 Rear tires: Trelleborg 710/60R42 Weight: approx. 12,000 kg Technical total weight: approx. 14,000 kg Dimensions l x w x h: approx. 560 x 255 x 325 cm Features: 4WD Suspended front axle Cab suspension Air conditioning Leather cab upholstery Grammer Dual Motion Driver's Seat AFS touchscreen Front linkage management GPS Preparation Cruise control Radio Front linkage Front PTO K80 Clutch Drawbar Tipper knob in the carriage Double-acting hydraulic valve on the front 3-pin plug on the front 7-pin plug ...

1. Ford Gasoline Pressure Washer Gasoline-powered Ford pressure washer, model FPWG33400H, suitable for cleaning patios, driveways, vehicles and machinery. Equipped with a powerful motor, mobile frame and several interchangeable nozzles. Maximum working pressure approximately 234 bar (3,400 PSI) and water output approximately 10 liters per minute. 2. Hyundai Gasoline Pressure Washer Hyundai Power Products pressure washer, model 57535, with a maximum working pressure of 207 bar. Suitable for a variety of cleaning tasks around the house, workshop and company premises. Equipped with a mobile frame, high-pressure hose and spray gun. 3. Unbranded gasoline pressure washer Hyundai petrol pressure washer with a 170 cc engine, a power of approximately 6.5 hp and a maximum pressure of 2,500 PSI (approximately 172 bar). The machine has a water output of approximately 34 liters per minute according t ...

Different brands: sayer, Reigter, Leitenberg, Man and Gesa. Auction-ID: A1-47450-2056

Hydraulic die spotting press for assembly, adjustment, inspection, maintenance and testing of large moulds and dies. Year 1991. Serial no. 635/2036. Useful platen dimensions approx. 2,000 × 1,500 mm. Distance between columns 2,130 × 1,630 mm. Vertical stroke 1,200 mm. Maximum closing force 1,500 kN (approx. 150 t). Maximum opening force 350 kN (approx. 35 t). Adjustable hydraulic pressure 0–250 bar. Maximum load on lower platen 30,000 kg and upper platen 15,000 kg. Upper platen rotation 100° and lower platen rotation 70°. T-slots 22 mm, DIN 650. Lower platen height from floor 770 mm. Rapid approach speed 65–80 mm/s, working speed 8 mm/s and return speed 35–50 mm/s. Main motor power 11 kW, auxiliary motor 1.1 kW, total installed power 12.1 kW. Electrical supply 380 V / 50 Hz. Approx. overall dimensions 6,150 × 2,130 × 4,700 mm. Approx. machine weight 27,000 kg. Equipped with o ...

TECHNICAL DATA: Work surface: 2550 x 1350 mm Solid worktops Including mezzanine level 04 Hydraulic cylinder: Ø 90 mm Vertical stroke: 550 mm Water operation Installed power: 2 hp

Offer 26350 Technical data: - Punch height up to 120 mm - Punching head adjustment panel from 23.5 - 63.5 mm - max. profile thickness ( aluminium ) 3 mm - Max. working stroke 350 mm - Max. punching stroke 12 mm - Working pressure 7 bar - Air consumption per operation approx. 9 l - with: - footswitch - 2 vertical, pneumatic hold-down devices - Retractable abutments - Adjustable punching heads - 2 swivelling support arms - Space requirement approx. W 850 x H 1250 x D 800 mm - Weight approx. 350 kg

Datex-Ohmeda M-NIBP – Non-Invasive Blood Pressure Module Manufacturer: Datex-Ohmeda Model: M-NIBP Type: NIBP Monitoring Rack Module Condition: Pre-Owned Auction-ID: A1-51275-13

Novacor Diasys Integra II – ABPM Blood Pressure Holter (ECG / NIBP) Manufacturer: Novacor Model: Diasys Integra II Contents: Housing only, as shown in the photos Functions: Ambulatory measurement of systolic, diastolic, average pressure and heart rate; auscultatory, oscillometric and automatic modes Weight: Approx. 195 g Condition: Good, functionally tested Auction-ID: A1-51275-35

With buffer tank; with water meter; engine brand Elmot Schäfer 2.2kW; on pallet Auction-ID: A1-50864-55

Unused Working pressure 150 bar – 15 MPa Maximum pressure 150 bar – 15 MPa Capacity 900 l/h – 15 l/min Maximum temperature 90 °C Burner power 3.6 kW Engine power 3.2 kW Nutrition 230 V/50 Hz Detergent tank Diesel Weight 35 kg Auction-ID: A1-40407-40

Unused in the original packaging The HDR180 petrol pressure washer offers complete independence from external power sources. Thanks to the powerful 7 hp Swedish motor, it can handle even the most demanding cleaning jobs. The robust Swedish outdoor equipment is specially designed for use in harsh conditions. As a special highlight, the Swedic Outdoor line has shock-absorbing buffers at the front and rear, a parking brake, an exhaust guard and large, solid rubber wheels for maximum mobility. Technical data: 7.0 hp OHV petrol engine with low oil protection Commercial Grade Direct Driven Cylinder Axial Pump 20 m high-pressure hose for maximum reach Quick connect nozzles: 0°, 15°, 25°, 40° and chemical nozzle Adjustable pressure up to 180 bar Low-pressure detergent injector for efficient detergent application High-pressure spray gun for precise work 2 m water inlet hose with filter for ...

Unused , 58kw , speed 1450 max 15l/min , working pressure 20mpa , max pressure 21 mpa Auction-ID: A1-40407-32

Robust metal structure with several adjustable clamping stations. Parallel groove work table, equipped with 3 set screws with operating handles. Set on metal frame with mobile supports on wheels, ideal for pressing and assembly operations. Size: 2500 x 1250 Functional Auction-ID: A1-51273-24

Unused, Led display, 1000W, 2800RPM, 0.3-0.9MPA Auction-ID: A1-40407-118

Has N2 Nitrogen been in; Test pressure 16.5 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-196

Auction-ID: A1-51211-62

Galvanized metal; equipped with lifting eyes Auction-ID: A1-50864-92

On adjustable tripodLot is equipped with flange valves and wall-mounted pressure gauge Auction-ID: A1-50864-80

Unused, Led display, 1000W, 2800RPM, 0.3-0.9MPA Auction-ID: A1-40407-47

Test pressure 16 bar; blue lacquered metal; equipped with lifting eyes Auction-ID: A1-50864-91

Tank capacity is 2000 liters; Lot is sold up to 1st flange coupling; equipped with lifting eyes Auction-ID: A1-50864-79

Colin BP-508 – Blood Pressure Monitor Manufacturer: Colin Model: BP-508 Type: Vital Signs/Blood Pressure Monitor Condition: Used, Functional Tested Suitable for Recovery Room, Outpatient Surgery, Endoscopy and Emergency Department. Auction-ID: A1-51275-10

Metal construction with cylindrical hopper, filling valve, . Equipped with a set of taps, All connection fittings and lever valve control included. Functional Auction-ID: A1-51273-36

proof pressure 16.2 bar; equipped with lifting eyes Auction-ID: A1-50864-67

Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W Auction-ID: A1-40407-111

Tank capacity 5000 liters; proof pressure 15.73 bar; equipped with lifting eyes Auction-ID: A1-50864-82

Additional information Brand: Daewoo Type: DHPW-7300 Condition: unused, in the original packaging Working pressure: 200 bar Temperature: 30°C to 140°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Auction-ID: A1-40407-125

pressure: 60 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Handover: in its current state as seen -Control: not working -Manufacturer: GEV GEBR. EDELHOFF, Single-column eccentric press type EPR 35 -Pressure capacity: 35 tons -Coupling: pneumatic -Drive: 3 kW -Stroke: adjustable 5 - 75 mm - Stroke rate: 120 rpm -Table size: 500 x 380 mm -Table cutout: 220 x 175 mm -Protrusion: 195 mm -Punch holder: Ø 40 mm -Insertion height 310 mm -Dimensions: Press 1520/920/H1960 mm / Control 800/400/H1100 mm -Weight: 1729 kg / 132 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 62500 € : 1181.25 € : 40 to : 1250 mm : Y1 / Y2 / X und R Achse : 200 mm : 1050 mm : 250 mm : 440 mm : servomotorischer Spindela : 115 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 1950 mm : 1450 mm : 2650 mm : 3600 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tran ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 65200 € : 1232.28 € : 40 to : 2050 mm : Y1 / Y2 / X und R Achse : 200 mm : 1700 mm : 350 mm : 440 mm : servomotorischer Spindela : 180 mm/s : 10 mm/s : 115 mm/s : 650 mm : 250 mm : 1000 mm : 7.2 kW : 2600 mm : 1450 mm : 2650 mm : 4400 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm tran ...

Gebr. Slotted Hole Drilling Machine JAGO Type: B2 exact year not known 1-lever operation Dowel pitch: 16 / 22 / 25 / 32 mm Drilling depth: 150 mm Height adjustment by handwheel Height display via counter Table size 300 x 600 mm 2-jaw chuck (up to 20 mm) 2 pcs. eccentr. Workpiece clamp 90° stop Workpiece stop on the side Extraction connection: 80 mm Weight: 230 kg Manufacturer information Good condition! The machine from a 1-man workshop

CONTINUOUS STEAMING AND SHRINKING OF YARNS THROUGH WATER VAPOR AT 100°

Key data: 40 t, 1500 mm

1500 x 40 ton Cybelec Cybtouch 12" X & Z Axis

Rated force: 125t, stroke adjustment: 20-140mm, ram adjustment: 80mm, stroke rate: 50/min, motor power: 10HP, drive: mechanical eccentric drive, machine is fully functional, maintenance, repairs and safety inspections have been carried out regularly, inspection logbooks and inspection reports are available for the period 2010-2025, extensive maintenance and repair work has been carried out in recent years, including work on the connecting rod and connecting rod bearing, eccentric bushing, bearing points, gear coupling, brake and clutch shoes, bearings, bushings, lubrication system, lubrication pump, parallel keys and other components. On-site inspection is possible.

Pressing force: 100t, distance between uprights: 1030mm, stroke: 600mm, max. installation height: 900mm, table dimensions X/Y: 1000mm/1000mm, table height above floor level: 850mm, lateral opening between uprights: 540mm, ram dimensions X/Y: 900mm/1000mm, oil capacity: 500l, drive power: 30kW. Machine dimensions X/Y/Z: approx. 2000mm/1700mm/4200mm, weight: approx. 10t. The press was mainly used for die tryout and pressing small batches. Documentation available. An on-site inspection with the machine powered on is possible.

Offered is a sheet-fed offset printing press with automatic perfecting device. Min. sheet size: 100 × 148mm. Max. printing area X/Y: 650mm/460mm. Printing speed: 4000-15000 sheets/h. Impression count: 21 million. Substrate thickness: 0.04-0.4mm. Printing plate size X/Y: 650mm/550mm. Printing plate thickness: 0.20-0.30mm. Rubber blanket size X/Y: 579mm/648mm. Rubber blanket thickness: 1.95mm. Gripper margin: approx. 10mm. Control system: Sakurai Interactive System. Inspection possible by arrangement.

Working width: 3000 mm working depth: 1200 mm Number of pressing surfaces: 3 Stk. range L-W-H: 4500 x 2200 x 2100 mm Weight: 1500 kg TRIMWEX hydraulische 3 - Etagenpresse Typ SLV - HPR3 - 100 Technische Daten - Arbeitslänge 3000 mm - Arbeitsbreite 1200 mm - Verleimdicke 20 - 100 mm - Anzahl der Ebene: 3 - Verpressung erfolgt mit einseitigem hydraulischen Zylinder - Anzahl der Zylinder pro Ebene 6 - die Druckzylinder sind fest - Zylindertyp Ø 50 x 150 mm - Spezifische Druck 4,5 kg/cm2 - Anzahl der Niederhaltern pro Ebene 4 - jeder Niederhalter hat einen pneumatischen Zylinder - Typ der pneumatische Zylinder Ø 50 x 75 mm - jeder Niederhalter hat eigenes Ventil für Ein/Aus der Luft - Druckregulation mit Regulator - Hydraulisches Aggregat - Pumpendurchfluss 5,5 l - Leistung der Hydromotor 2,20 kW - max. Druck für der Hydromotor 30 - 130 bar - Parkplatz für die Niederhal ...

Pneumatic press-fit machine CIP-8P Technical data: Press force 80 kN, approx. 8 tons Force adjustment via display, accuracy 1 kg Compressed air 8 bar, min. 150 l/min Tool and shank diameter Total length 37 or 76 mm, of which 15 mm in the holder, Ø 12.7 mm Compatibility: Tools from other manufacturers can also be used External dimensions (L × W × H) and weight: 650 × 2,300 × 1,100 mm, 400 kg Warranty: 36 months after delivery

Channel baler Paal Konti 275 D, built in 2001 with vorbulator and chain belt conveyor Paal KEM-1500, built in 2005 Technical data: Manufacturer: Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20900 as of 10/2026 Pressing force 75 t Total connection 106 kW Filling opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveying speed: 0.29 m/s Nominal width 1500 mm Wheelbase 17500 mm Length of feed belt: approx. 10000 mm Length of climbing section: approx. 9000 mm Gooseneck: approx. 1000 mm Slope angle: 28° Materials: pa ...

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

Offer 26180 Technical data: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Installation height approx. 1000 mm - Projection to the middle of the ram 520 mm - Pusher clamping surface 350 x 350 mm - Plunger clamping pin 40 mm - Table size 1000 x 1150 mm - Table opening 150 x 780 mm - Table height above floor 720 mm - Drive 400 V / 8 kW - Space requirement approx. W 1150 x H 2900 x D 2150 mm - Weight approx. 4800 kg

garage press Type: Hydraulic Workshop Press Press force: 12 tons Cylinder stroke: 175 mm Working range: 0 – 920 mm Working width: approx. 510 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 75 kg Condition: Unused Auction-ID: A1-51368-16

garage press Type: Hydraulic Workshop Press Press force: 12 tons Cylinder stroke: 175 mm Working range: 0 – 920 mm Working width: approx. 510 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 75 kg Condition: Unused Auction-ID: A1-51368-125

Equipped with foot control. Auction-ID: A1-41281-322

Auction-ID: A1-51025-2

Equipped with Honda GX160 petrol engine; Auction-ID: A1-50892-46

equipped with extraction Auction-ID: A1-50707-126

garage press Type: Hydraulic Workshop Press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 98 kg Condition: Unused Auction-ID: A1-51368-15

garage press Type: Pneumatic-hydraulic workshop press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Pneumatically assisted hydraulic pump (air + hand pump) Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge for precise force control Safety: pressure relief valve against overload Connection: 1/4\" compressed air connection (4–8 bar) Weight: approx. 100 kg Condition: Unused Auction-ID: A1-51368-124