press hidraulic used for sale

Manufacturer: Huber Model: Strainpress SP 290 Type of Machine : Screw press separator Condition: Used, fully functional Included Spare Parts and Accessories - Control cabinet (included) - Digital documentation (included) - Used screw shaft screening zone, conical 288/204 SW1735, including sleeve - New screw shaft press zone 198 SW1678 - New screen basket Strainpress 290 200/2 L810 RV 2-3.42 press zone - 4 x new spherical roller bearings 22313EAE4 (d65 D140 W48) - 2 x new piston rings 100/120x12 - Small parts kit: shaft seals, spacer rings, grease cartridges, shaft keyways, bolts, brass nuts, bearing puller tool Find more here - / Contact us at -

Injection material blowing pressure: 0.5-6bar, Drive: variable gearbox Lenze, Elements: material hose, blow-out nozzle, directional valve, swivel lever, exhaust valve, valve, nozzle, pressure reducer, handwheel, slide gate, control cabinet, control switch, water hose, needle valve, nozzle mixing body. Overhauled by the manufacturer in 2014. With pressure vessel and documentation. An on-site inspection is possible.

An HD piston compressor Bauer is available. Capacity: 800l/min, max. operating overpressure: 160bar, max. operating pressure: 2320psig, power: 18.5kW, speed: 1180rpm. Machine dimensions X/Y/Z: approx. 2200mm/1100mm/1450mm, weight: approx. 750kg. An on-site inspection is possible.

Bread press Fortuna Automat A 4 E Dough dividing and rounding machine with stainless steel blade Dough insert 1200 to 3600 g, Dough divider with knitting plate Connection 400V, 16A-CEE plug Used machine from the bakery

Press height 140 mm Press force 70 kN (7 t) Hydropneumatic actuator Compressed air connection 7 bar Air consumption per work stroke 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm Weight 550 kg

Offset printing machine Type: R 202 ET Manufacturer: Man Roland Year: 2003 Impresion: 30.000.000 Machine in good condition Find more here - / Contact us at -

Bread Press Erika Record Automat Erika Record Automat 30pcs Part head NEW revised Stainless Steel Knife NEW only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled Warranty

Key data: 5 t, 350 mm, 310 mm

Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!

High-pressure injection system for your filler between filler outlet and infeed of the capping machine consisting essentially of: - High-pressure pump including frame - Heating system as well as valves - Nozzle unit - Electrical control cabinet - Pressure tank A technical description including pictures can be found in the attachment by an offer.

Roll Press Record Machine Dough part and knitting machine Erika Record Automat Roll press for dividing and rounding with knitting plate Connection 400V, 16A-CEE plug Used machine

Bread Press Fortuna Semi-Automatic Dough dividing and rounding machine Semi-automatic 30-piece Parting head NEWLY revised only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled

Bread Roll Press Eberhardt Optimat S Subrange 30 to 90 grams/piece Dough insert 900 to 2800g Dough divider with 3 knitting plates Connection 400 V, 16A-CEE plug Used machine

Dough dividing and rounding machine Bread Press Fortuna Automatic A 3 H + Partial head reworked with stainless steel knife NEW Dough insert up to 2400g Dough divider 30 pieces Connection 400V, 16A-CEE plug Used machine overhauled

Pressing force: 100 t Table length: 3000 mm Table width: 180 mm Passage between racks: electric motor: 10 kW Dimensions lxwxh: 3200x1450x2950 mm Weight: 8,000 kg In good condition, connected with the possibility of testing.

Item No. Z-HF63-WH - 30 cm rack with 30 plates - As good as new device, built in 2022 - Total Trubraum approx. 249ltr. - Total filter area approx. 19.5m² - With electric hydraulic pump - without feed pump - Connection thread DN50 DIN 11851 - with monofilament cloths and end cloth - 1 year functional warranty

Key data: 100 t

Durendus DCD-100 – Hydraulic single-column press 10–100 t – 800 × 600 mm For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force from 10 to 100 t. The machine is designed for demanding forming, deep-drawing and assembly processes and has an integrated thermoforming pad and a modern Siemens control system. Thanks to high travel speeds and precise control, it is suitable for both series production and flexible individual applications. Technical data + information: Hydraulic Single Column Press – DCD-100 General information - Manufacturer: Durendus - Model: DCD-100 - Type: C-frame / single-column press - Press force: 10–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm Workspace - Max. distance table ...

Used Fortuna Roll Press Automatic A3 Dough Divider Product Description Manufacturer: Fortuna Machine Type: Automatic Machine A3 / Size 3 With two red plastic warp knitting plates The working room height is adjustable Functions: Only cut or cut as well as act Details see pictures.

Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.

Press Brake – Bystronic Xpert 40/1030 - Manufacturer: Bystronic - Model: Xpert 40/1030 - Year of manufacture: 2019 - Press force: 400 kN (40 t) - Working length: 1,030 mm - CNC control: ByVision Bending - Software version: ByVision Bending 3.14.0 / CNC 3.14.0.285 / Safety 4.1.3 - Operating hours: 7,724 h - Cycle counter: 310,212 Robot – KUKA KR10R 1100 sixx - Manufacturer: KUKA - Model: KR10R 1100 sixx - Year of manufacture: 2019 - Max. payload: 11 kg - Reach: 1,100 mm - Axes: 6-axis - Position repeatability: 0.02 mm - Safety: CE-certified safety modules Control Cabinet – KUKA KRC4 compact - Manufacturer: KUKA - Model: KRC4 compact - Year of manufacture: 2019 Machine Condition - Operating hours: 7,724 h - Cycle counter: 310,212 Find more here - / Contact us at -

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

A hydraulic transfer molding press Lauffer is available. Press force: 125t, power: 15kW, hydraulic oil volume: 300l, machine dimensions X/Y/Z: approx. 2200mm/1400mm/3000mm, weight: approx. 6500kg. An on-site inspection is possible.

A heated platen forming press Italpresse in bottom piston design is available. Press force: 660t, platen dimensions X/Y: 1900mm/1600mm, heating power: 31kW, connected load: 108kW, rapid stroke cylinder diameter: 70mm, weight: approx. 28000kg. Documentation available. An on-site inspection is possible.

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

Machine Group: Single Column Eccentric Press 25 to Make: Colombo Agostino Type CA.25.V Year of Make: 1988 Control: conventional

LASCO TSP 160 S forging press was built in Germany by Langenstein & Schemann A.G. (Lasco Umformtechnik GmbH). The machine has been continuously maintained and upgraded throughout its service life. In 2019, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO TSP 160 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex parts. It is ideal for forges and industrial plants that require high press forces and high repeatability of the manufactured parts. Its main purpose is die forging, metal stamping and metal forming, especially hot forming of steel or aluminium workpieces. It also enables punching, calibration of forgings, trimming and blanking of workpieces after the forgin ...

Key data: 300 t

300 T Gantry Straightening Press – Gantry Press – 3,000 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic gantry press with a pressing force of 300 t for straightening, assembly and machining processes on large-format components. Base price: 102.000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with T-slots according to DIN 650 75 mm table top Servo hydraulic ...

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

Key data: 300 t

300 T Gantry Straightening Press – Gantry Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic gantry press with a pressing force of 300 t for straightening, assembly and machining processes on large-format components. Base price: 142.000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with T-slots according to DIN 650 75 mm table top Servo hydraulic ...

Press has made 2 686 854 pieces so far, and large factories make well over 10 million pieces with these machines. The maximum theoretical diameter of the piece is 380 mm, production-wise max. 320 - 340 mm finished size. Depth 110mm finished measurement. Speed: small objects 300 - 350 pcs/h large ones 120 - 160 pcs/h. Between 2004 and 2010, less than 2 million pieces were driven on the Press, and after that the demand for the products has decreased and today it is driven only a few hours a week, sometimes the press stands unused for a couple of weeks

Crucifer processing made easy - with the KSB-2 you can debulk up to 600 cabbage heads per hour precisely and quickly, Semi-automatic de-strunking process (two-hand operation), Good condition, only a few operating hours, adjustable drilling depth, incl. standard drill head Ø 90 mm, Compressed air: 6 bar, Motor: 0.9 kW, The stalk stripper KSB-2 efficiently and professionally detaches whole cabbage heads (e.g., red and white cabbage, pointed cabbage) and is characterized by its user-friendly operation, stability, and hygienic design., Info at: .kronen.eu/de/loesungen/kohlstrunkbohrer-ksb-2, Note: The video shows the KSB-2 and the CAP 68, the predecessor of the CAP 350., power: about 2,000 kg/h, Dimensions / weight: L x W x H: 840 x 1,100 x 1,400 mm, Weight: 230 kg

CONTROLS   electronic controls SCHMIDT PRESS FORCES   total force (nominal): 0.25 to PRESS TABLE   table surface (left-right): 180 mm   table surface (front-back): 150 mm SLIDE   slide force: 0.25 to   stroke: 100 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 35 kg This is an assembly press with force-displacement monitoring. • Operating hours: approx. 150 • Condition: very good, almost like new • Features: Press force monitoring, two-hand operation • Stroke: 100 mm • Tool dimensions: 150 x 100 mm • Press force: 0.25 tons

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg

diameter range 1,8-3,4 mm nail length 13-80 mm output - pieces/min 550

diameter range 1,8-2,5 mm nail length 32-57 mm output - pieces/min 2000

diameter range 1,0-2,4 mm nail length 10-50 mm output - pieces/min 700

diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800

diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350

diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 950

diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370

wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370

wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420

diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550

diameter range 1-2,2 mm nail length 10-50 mm output - pieces/min 520

diameter range 2,1-3,1mm nail length 32-51mm output - pieces/min 1600

diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200

wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430

diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550

with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

diameter range 1,0-2,2 mm nail length 10-50 mm output - pieces/min 700

diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800