127,270 used machines on RESALE, but how to find them? Machine Search
Used Used PET Preform ENGEL 21.900 pz/h: Year: 2004 Condition: Good Used PET Preform ENGEL: Model: MacPET 4550-320 maszyna nr 52892 Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 110 More details: https://bottlingscout.com
Beutler P96-C630 - Eccentric Press - Mobile control panel - Infinitely variable drive - Clutch/brake combination - Overload protection in the ram - Light barrier - Gooseneck Lamp - Year of construction 1998 Technical data - Pressure: 630 kN - Stroke: 12 - 120 mm - Stroke rate: 30 - 130 rpm - Max. delay time: 96 ms - Projection: 300 mm - Distance table/plunger: 495 mm - Passage between body walls: 270 mm - Plunger area: 450 x 360 mm - Plunger adjustment: 120 mm - Table surface: 800 x 560 mm - Opening in the table: Ø 100 mm - Working height: 880 mm - Min. safety distance: 192 mm - Drive power: 5.5 kW - Operating voltage: 3x 400 V / 50 Hz - Machine dimensions WxHxD: 1800 x 2600 x 1600 mm - Dimensions control cabinet WxHxD: 800 x 1700 x 450 mm - Weight: approx. 5500 kg
Key data: 200 t
Capacity: 2000kN Year: 2017 Serial: 17X00095 Max Daylight: 1700mm Stroke: 1200mm Max Tooling Base Size: 2500x1500mm Max Advance Speed: 200 mm/s Electrical Supply: 415 Volts Phase: 3 Motor Rating: 50kW Continuous Approx. Net Weight: 25,000kg Max. Top Tool Weight: 10,000kg
Dowel and slotted hole drilling machine GANNOMAT JUNIOR 320 LBM very good condition, as good as new, the machine comes from a very small carpenter's shop and was used there very little the machine is in its original condition, it has only been cleaned, the paint has not been touched up this allows slotted holes to be milled and dowel holes to be drilled on 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1993 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible t ...
Joos Veneer Press HP 65/2 Panel size 1100 x 2500 mm ges. Pressing pressure: 650 kN Press height: 400 mm Number of cylinders: 4 Basic dimensions: 2900 x 1300 x 2040 L-W-H Used machine Condition: super Prices: free loading plus VAT
- Brand:AMADEO FARELL - To make bullets - Loading mouth: 1200 x 500 - Tunnel size: 800 x 600 - Motor: 15hp (11kw) - With electrical panel
Briquette press Spänex SHB 250 Year of construction 2019 Briquette size: 72 x 127 mm - 8 square Pressing capacity: 250 kg/h (depending on material) Oil cooler System pressure: 280 bar Total connected load: 14 Kw Control: Siemens Simatic HMI Hours: 7900 Material silo Spänex type R III-F Dimensions: 2.20 m x 2.20 m x 1.80 m (without feet and blow-in housing) Total body height: 3.50 m Including rotary valve and agitator
- With lens membrane - With closed press basket - Machine overhauled Technical data : Press basket capacity: 6hl Whole bunch capacity: 420 kg Quantity of crushed grapes: 1200-1800 kg Fermented grape capacity: 1800-2400 kg Total installed power: 1.47 kW Dimensions: Length: 1870 mm Width: 1140 mm Height: 1470 mm
Wemhöhner VOF2-250/2 continuous press line complete from location 98693 Ilmenau OT Langewiesen for sale.
Key data: 3550 mm, 2250 mm
Frame press Hess Type SPEEDY Built in 1995 Crimping dimension 3550 mm x 2250 mm Insertion depth 100 mm Electric height adjustment of the press cylinders Hydraulic 160 bar pressure capacity Hydraulic power unit 2.2 kW 3 vertical cylinders: 1000 mm stroke, 20,000 N pressing force per cylinder 2 horizontal cylinders: 80 mm stroke, 12,500 N pressing force per cylinder Smallest dimensions without medium pressure beam horizontal 380 mm, vertical 320 mm Dimensions 4500 mm x 950 mm x H 2600 mm Weight 1,800 kg Loading dimensions Length 4500 mm x Height 2450 mm Width approx. 2400 mm
ORMA 3-deck press NPC 26/14-3V + Höllenholscher Kühlstern discharge from site for sale.
Hello, We hereby offer you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Hours 15606 Hours Press force main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm approx. 6.7 t/hour Machine weight press 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block replaced) and tested on the fly, in manual and automatic mode. The machine documentation is available in German. A tour of the press is possible by appointment in our workshop. We would be happy if ...
Key data: 20 t, 160 mm
Hello, We hereby offer you a used workshop press from Rodkraft, type WP 20F. Manufacturer: Rodcraft Pneumatic Tools GmbH & Co. KG Type WP 20 F Year of construction 2000 Machine No. P18096N Hydraulic stroke 160 mm Pressing force 20 t Machine dimensions 2150 x 960 x 660 mm Transport dimensions 2150 x 980 x 750 mm Machine weight 180 kg Note: The aforementioned technical data have been taken from brochures of the manufacturer or other sources, for which we cannot guarantee the accuracy and completeness. Scope of delivery: 1 piece used workshop press Rodkraft, type WP 20F Area of application and condition: The machine was used sporadically in a company locksmith's shop for squeezing / squeezing bearings, etc. The machine is fully functional and in good condition. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein Gm ...
Press brake manufactured in 1999. This AMADA HFB 5020 features a maximum pressing force of 500 kN and a maximum stroke of 200 mm. With a robust machine weight of 4700 kg, it is designed for durability and efficiency. If you are looking to get high-quality pressing capabilities, consider the AMADA HFB 5020 machine we have for sale. Contact us for further details.
For sale is a Styrofoam block press manufacturer Wemhöhner, the press is in good condition and can be viewed by appointment. I will be happy to answer any further questions you may have.
Slotted Hole Drilling Machine Panhans Type 116 Year of manufacture 1997 With dowel device Two-jaw drill chuck 1-20 mm Table fixed, drilling support movable 1 eccentric clamp on the table Table size 700 mm x 380 mm Maximum drilling depth 145 mm Maximum elongated hole length 240 mm Height travel 135 mm Motor power 1.5 kW Speed 3000 rpm. Weight approx. 200 kg
Key data: 100 t
For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force of up to 100 T. The machine has a table size of 800 × 600 mm, a maximum installation height of 700 mm and an adjustable stroke of up to 500 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. Here are the technical data of the offered machine: Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Title: Hydraulic Single Column Press - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15–100 T (adjustable) - Max. installation heigh ...
Key data: 100 t
For sale is a used spotting press from the manufacturer Reis with an adjustable press force of up to 100 t. The 4-column press has a table size of 1600 × 1300 mm, a maximum open height of 950 mm and an ejector in the table, making it particularly suitable for spotting, tuning and tool work in mould and tool making. Here are the technical data of the offered machine: Technical data + information: Spotting press – REIS TUS 80-100 Allgemeine Disclosures - Name: spotting press - Manufacturer: REIS - Type: TUS 80-100 - Type: 4-column press - Year of construction: 1998 - Press force: 26–100 T (adjustable) - Retraction force max.: 45 T - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Open height max.: 950 mm - Overall dimensions (WxDxH): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm Hydraulik - Hydraulic pum ...
Key data: 175 t, 4050 mm, 3600 mm
Capacity: 4050 mm x 175 Ton. Distance between frames: 3600 mm. Stroke: 265 mm. Control: DURMA DT15 (3D Touch Screen). Dimensions: 5200 x 1900 mm. Height: 2930 mm. Weight: 12,750 Kg.
CONTROLS PLC SCHNEIDER PRESS DESIGN drive system: eccentric / crank number of slide actions: 11 feedstock transport direction: left to right PRESS FORCES total force (nominal): 66 to SLIDE slide force: 6 to stroke: 114 mm SLIDE (MECHAN. PRESS) variable speed: yes stroke rate (min.): 40 /min stroke rate (max.): 130 /min main drive power: 7.5 kW STRIP-FEEDER feeder type: roll feeder TRANSFER SYSTEM distance between tools, stroke X fixed: 82 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 2875 mm space requirements -front/back-: 1500 mm total height: 2900 mm total weight approx.: 7500 kg ATTACHMENTS (PRESSES) safety guard / safety door: yes 2-hand engagement: yes noise protection cabin: yes acc. to actual accident protection regulation: yes Specifications: Number of stations: 12 (11+1) Capacity ...
Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine.
Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible.
Press brake manufactured in 2019. This FEYSAMA MCCH 6/3050 features a press force of 135 tons and a bending length of 3200 mm. It includes a programmable stroke of 160 mm and a backgauge with a stroke of 800 mm. If you are looking to get high-quality bending capabilities, consider the FEYSAMA MCCH 6/3050 press brake we have for sale. Contact us for further details.
Press force: 250kN, ram stroke: 8mm-80mm, stroke rate: 180/min, installation height: 310mm, table dimensions X/Y: 550mm/400mm, ram dimensions X/Y: 355mm/220mm, machine dimensions X/Y/Z: approx. 1100mm/1400mm/2300mm, weight: approx. 2500kg. An on-site inspection is possible.
An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible.
A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible.
Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.
7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835 Capacity: 130 ton x 4100 mm Backgauge: CNC Control: AMNC-PC Touch Passage between uprights: 3760 mm Max ...
A repair-required CNC press brake Amada is available. Press force: 1000kN, max. stroke: 200mm, working width: 3100mm, passage: 2690mm, throat depth: 400mm. Machine dimensions X/Y/Z: approx. 3600mm/2100mm/2600mm, weight: approx. 6500kg, operating hours: approx. 37661h. The cylinder control has a defect. Documentation available. An on-site inspection is possible.
Table dimensions: 1000,400 mm pneumatic clamping: 4 St. moveable: ja For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton
12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm
A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible.
We sell a WP roll press type Rotamat EN . Bakery condition
For sale is a hydraulic single-column press (C-frame) with a press force of 100 t. The machine has a table size of 700 × 750 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Type: Single column press / C-frame - Press force: 100 T - Table size: 700 x 750 mm - Max. distance plunger – table: 550 mm - Working height: 1000 mm - Overall dimensions (WxDxH): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / holes: DIN 650 / 22 mm Hydraulikzylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Replaceable crimping head: Ø 100 mm Hydraulikaggregat ...
Manufacturer: Heidelberg Model: Linoprint CV Year of Manufacture: 2015 Type of Machine : Digital Colour Press Total Colour Impressions: 1,345,950 Total Black and White Impressions: 445,200 INCLUDED ACCESSORIES - 3x Large Capacity Paper Cassette (triple configuration) - Finisher SR 5050 - EFI Fiery Controller E-43A Find more here - / Contact us at -
(1992) 125t Müller Eccentric Press Versatile Mechanical Forming Solution This eccentric press offers a nominal pressing capacity of 125 tons, designed for reliable and efficient mechanical forming operations. With an adjustable ram stroke range of 20–120 mm and an additional 80 mm ram adjustment, the machine provides flexible setup options for various tooling and production requirements. Technical Details Machine Type: Eccentric Press Manufacturer: Müller Machine Number: 3010 Year of Manufacture: 1992 Model: EPR/RH125ST Nominal Capacity: 125t Ram Stroke (Adjustable): 20 – 120 mm Ram Adjustment: 80 mm Total Weight: 9,000 kg Motor Power: 11 kW Operating Voltage: 380 V Safety Distance: 185 mm
CARDBOARD PRESS SPECIFICATIONS Manufacturer: Presona Model: LP50VH2 Year of Manufacture: 2014 Maximum Pressing Force: 500 kN Maximum Oil Pressure: 25 MPa Type: Cardboard Press Condition: Used CONVEYOR BELT SPECIFICATIONS Manufacturer: Topeko Year of Manufacture: 2008 Length: 18 metres Width: 1.25 metres Motor: 40 kW Voltage: 400V / 50Hz Refurbishment: Completely rebuilt September 2024(chains, belts, all components replaced, outer frame only retained) Find more here - / Contact us at -
9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm
(1983) 125t Müller Eccentric Press Heavy-Duty Mechanical Press Robust Eccentric Press from 1983 with a 125 t nominal force and adjustable ram stroke, ideal for precision forming and heavy-duty production. Technical Details Machine Type: Eccentric Press Manufacturer: Müller Machine Number: 1204 Year of Manufacture: 1983 Model: EPR/R125 Normal Nominal Force: 125t Maximum Nominal Force: 135t Ram Stroke (Adjustable): 20 – 120 mm Ram Adjustability: 80 mm Weight: 8,250 kg Motor Power: 11 kW Operating Voltage: 380 V Safety Distance: 205 mm Brake System: Equipped with an Ortlinghaus auxiliary brake system
(1975) 100t IWK Eccentric Press Industrial Eccentric Press for High-Capacity Stamping This 100-ton eccentric press from 1975 features a robust electrical configuration designed for versatile industrial manufacturing. Technical Details Machine Type: Eccentric Press Manufacturer: IWK Model: PEDRS 100 Year of Manufacture: 1975 Machine Number: 22/20076/3 Circuit Diagram Number: 911 871 Nominal Force: 100t Mains Connection 1: 380 V, 3-Phase, 50 Hz, 36 A Mains Connection 2: 220 V Max. Back-up Fuse: 80 A Control Voltage: 220 V (AC) / 24 V (AC) / 24 V (DC) Lighting Voltage: 220 V
(1961) 100t Müller-Weingarten Eccentric Press High-Precision Mechanical Press This Müller-Weingarten model is a versatile industrial workhorse featuring a variable stroke and a high-performance 11 kW motor. Designed for heavy-duty applications, it can process material thicknesses up to 12 mm with a consistent operating speed of 55 strokes per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ER 100 Year of Manufacture: 1961 Nominal Force: 100t Maximum Material Thickness: 12 mm Stroke Rate: 55 strokes/min Ram Stroke (Adjustable): 8 mm – 112 mm Ram Adjustment: 80 mm Shut Height (Die Space): 355 mm – 407 mm Overrun Time (Stopping Time): 0.174 Seconds Safety Distance: 278 mm Motor Power: 11 kW
(1963) 100t Müller-Weingarten Eccentric Press High-Precision Mechanical Press This Müller-Weingarten model is a versatile industrial workhorse featuring a variable stroke and a high-performance 11 kW motor. Designed for heavy-duty applications, it can process material thicknesses up to 12 mm with a consistent operating speed of 55 strokes per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ER 100 Year of Manufacture: 1963 Nominal Force: 100t Maximum Material Thickness: 12 mm Stroke Rate: 55 strokes/min Ram Stroke (Adjustable): 8 mm – 112 mm Ram Adjustment: 80 mm Shut Height Range (Die Space): 355 mm – 407 mm Overrun Time (Stopping Time): 0.154 Seconds Safety Distance: 246 mm Motor Power: 11 kW
(1970) 200t Müller-Weingarten Eccentric Press Heavy-Duty Eccentric Press for High-Capacity Industrial Forming This powerful 1970 mechanical press is engineered for heavy-gauge metalworking, offering a significant 200-ton pressing capacity and a maximum sheet thickness of 28 mm. Technical Details Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: AR 200 Year of Manufacture: 1970 Nominal Force: 200t Max. Thickness: 28 mm Stroke Rate: 32 strokes/min Ram Stroke: 40 – 180 mm Ram Adjustment: 110 mm
(1985) 630t Gräbener Knuckle-Joint Press High-Performance Knuckle-Joint Press This 1985 Gräbener knuckle-joint press is a high-capacity machine engineered for applications requiring extreme force at the bottom of the stroke, such as coining and cold forming. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKN 630 Year of Manufacture: 1985 Nominal Force: 630t Stroke: 112 mm Stroke Rate: 55 strokes/min Shut Height: 800 mm Tool Holder Adjustment: 80 mm Motor Output: 25 kW Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, 50Hz
(1973) 180t Gräbener Knuckle-Joint Press Precision Knuckle-Joint Press for Detailed Cold Forming This 1973 Gräbener model utilizes a knuckle-joint mechanism to deliver high pressing force with controlled ram speed, making it ideal for precision coining and embossing tasks. It features a compact design with a 180-ton capacity and is equipped with a 5.5 kW motor for reliable industrial operation. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 180 Year of Manufacture: 1973 Nominal Force: 180t Stroke: 50 mm Stroke Rate: 40 strokes/min Shut Height: 305 mm Tool Holder Adjustment: 40 mm Clearance Between Uprights: 390 mm Table Area (Width x Depth): 370 mm x 450 mm Tool Holder Mounting Surface (Width x Depth): 360 mm x 200 mm Tool Holder Shank Hole (Ø x Depth): 40 mm x 75 mm Motor Output: 5.5 kW Motor Speed: 1,450 ...
(1974) 160t Edelhoff Eccentric Press Eccentric Press for Heavy Stamping and Forming This 1974 Edelhoff mechanical press offers a robust 160-ton capacity and a highly adaptable stroke range, making it suitable for a wide variety of industrial metalworking applications. Technical Details Machine Type: Eccentric Press Manufacturer: Edelhoff Model: AZR 160 Machine Number: 8069 Year of Manufacture: 1974 Nominal Force: 160t Stroke Adjustment: 30 – 160 mm Ram Adjustment: 75 mm Stroke Rate: 45 strokes/min Electrical System: 380 V
(2000) 1000t Müller Knuckle-Joint Press High-Capacity Precision Knuckle-Joint Press This modern model represents a significant leap in pressing power, offering a massive 10,000 kN capacity and it is designed for large-scale precision operations. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Müller Model: KNP 1000 Machine Number: 2912 Year of Manufacture: 2000 Nominal Force: 1000t Work Capacity: 33 kJ Ram Stroke: 100 mm Ram Adjustment: 65 mm Stroke Rate: 40 strokes/min Shut Height (Table to Ram): 400 mm Ram Surface Area (W x D): 700 mm x 500 mm Table Surface Area (W x D): 700 mm x 750 mm Motor Output: 30 kW Operating Voltage: 400 V Safety Distance: 225 mm Limit Value (Stopping Time): 97 ms Total Weight: 42,000 kg Machine Dimensions (W x D x H): 2.3 m x 3.4 m x 4.1 m
maximum number of results exceeded
please refine your search
