press hidraulic used for sale

Key data: 250 t

Inv. Num. : 8652 Type: ZHS 250 Producer: ŽDB Hydraulika Generated: 2000 Parameters: Compressive force: 250 t Table length: 3500 mm Table width: 1200 mm Stroke: 700 mm Ram dimensions: 3500 x 1200 mm Working speed: 13-60 mm/s Machine height: 6000 mm Machine length: 3000 mm Machine width: 5000 mm Machine weight: 60000 kg

LOIR SAFE PHSL CNC PRESS BRAKES Year of construction 1999/2023 (cnc renovation) Control : Step Automation RK15 Max. bending force: 630 t Usable bending length: 6050 mm Projection: 500 mm Engine power: 47 kW Total weight : 58t approx.

Type: ASP600HDI Serial number: 21401214 Year of construction: 2003 Belt width: 600 mm Belt speed: 1.2 - 12 m/min Power: 3 x 400V, 50Hz, 2.2kW Dimensions: 2400 x 900 x 1600 mm Weight: 590 kg

Müro 5000/A4 TM block size press; cleaned and tested; insertion width 350mm; Insertion height 520mm; Stack increase for small stacks. Padding press Müro 5000/A4 TM; cleanded and checked; width 350mm; hight 520mm; pile elevation.

Key data: 100 t, 3000 mm

Multi axis - Servo electric

LVD PPEB 100 ton x 2500 mm + 1000 mm CNC Capacity: 100 ton x 2500 mm + 1000 mm Backgauge: CNC Control: 2D touch Passage between uprights: 2050 mm Max stroke: 120 mm Max distance between table -- ram: 400 mm! Depth of throat: 200 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 80 mm/sec Electric motor (power): 11 kW Length: 4100 mm Depth: 2320 mm Height: 2800 mm Weight: 8,5 ton

Key data: 80 t, 2550 mm, 2050 mm

Safan CNCS 80-2550 - Hydraulic press brake - Incl. various bending tools - Year of construction 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Projection: 250 mm - Passage: 2050 mm - Stroke: 140 mm - Stop time: 140 ms - Stop travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 850 mm   table surface (front-back): 550 mm SLIDE   table surface (left-right): 560 mm   table surface (front-back): 376 mm   spigot hole diameter: 50 mm   stroke: 110 mm   stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 0 mm   stroke max.: 110 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 855 mm   space requirements -front/back-: 1635 mm   total height: 2640 mm   total weight approx.: 5400 kg ATTACHMENTS (PRESSES)   2-hand engagement: yes   ...

Inv. Num. : 8707 Type: TrumaBend V170 Producer: Trumpf Created: 2003 Parameters: Compressive force: 170 t Maximum bending length: 4080 mm Distance between frame walls: 3680 mm Stroke: 365 mm Machine weight: 18000 kg

Pressing force: 4000kN, pressing pressure: 320bar, oil pressure: 250bar, blank holder force: 1600kN, blank holder stroke: 200mm, blank holder dimensions X/Y: 1000mm/800mm, blank holder ejector force: 160kN, ejector force: 63kN, ejector stroke: 100mm, overrun distance: 40mm, overrun time: 190ms. Documentation available. An on-site inspection is possible.

Manufacturer: Kaiserpresse Model: PA620/2 Type of Machine : Press Find more here - / Contact us at -

gebr. Post-bending press Fabr. Graebener, Type GRNM, YOC 2005 max. bending force 16 t. Tool length 1,600 mm Adjustment of the underswing, hydraulic 2 cylinders Dimensions 5080 x 3290 x 2540 mm Kj Uovvlllerhyxkenb Weight 65 t.

pressure: 63 t throat: 260 mm stroke: 8-100 mm ram - range of adjustment: 63 mm no. of strokes: 115 Hub/min : 316 mm table surface area: 630x490 mm ram surface: 315x260 mm hole in the table: Ø 140 mm total power requirement: 4 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 2000 mm   height above floor level: 540 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 460 mm/s   working velocity min.: 25 mm/s   working velocity max.: 44 mm/s   return velocity max.: 460 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 180 kW DIMENSIONS / WEIGHTS   total weight approx.: 95000 kg ATTACHMENTS (PRESSES)   press automation: yes   gripper transfer system: yes   acc. to actual accident protection ...

Book press Tränklein ZP 39 Combi; cleaned and tested; Format per press plate 322x440mm; Insertion height 400mm; Pressing force 5t. Book press Tränklein ZP 39 Combi; cleaned and checked; size per pressing plate 320x440mm; hight 400mm; press capacity 5t.

Manufacturing year : 1992/93 BAR: 1500 KW: 450 RPM: 305 l/min: 150

Key data: 100 t

Sale due to switch to eccentric press Pressing force 100 tons Loading depth 360 mm Stroke 500 mm Daylight 800 mm Plunger area 530 x 400 mm Table height above floor 710 mm Working speed 10mm/sec Approach speed 150 mm/sec Return speed 150 mm/sec Required power 17 kW Dimensions L x W x H 1,400 x 2,000 x 3,200 mm Weight of the machine approx. 5.1 t Year of manufacture 2001 Price is net, VAT can be claimed. Loading facilities available All information without guarantee

Manufacturer: Ebu Model: STA 200/2000 Year of Manufacture: 2005 Overhaul: 2016 ( is currently equipped with a longitudinal transfer and has run very little since the overhaul) Punching force: 200 tons Installation space: 2000+800 Ram stroke: 16–160 Plunger adjustment: 0–120 mm Advance max.: 9999.9 Max. bandwidth: 300 Speed range: 30–150 Find more here - / Contact us at -

BAR: 1500 l/min: 71 KW: 230

Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Machine operating hours: 62,212.3 h Machine type: differential travel press Press force: 1300 kN Additional equipment : The strip feed system can also be purchased separately - Strip feed system from ALBA (Includes coiler, straightener, and roller feed) Find more here - / Contact us at -

7 assen: Y1 /Y2 / X / Z1 / Z2 / R1 / R2 Amada-bombardement Capacity: 125 ton x 3100 mm Backgauge: CNC Control: Delem DA65R Passage between uprights: 2600 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Locking speed: 85 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Length: 3245 mm Depth: 1940 mm Height: 2415 mm Weight: 7,7 ton

BAR : 1500 l/min : 52 KW: 160

3 assen: Y1 / Y2 / X Capacity: 220 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 3500 mm Depth: 1900 mm Height: 2700 mm Weight: 10,5 ton

BAR : 1500-2150 l/min: 19 kw: 102

Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Connection 400V, 16A-CEE connector Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning

Key data: 630 t, 275 mm

For sale is a used lowering press, manufacturer Sack + Kiesselbach, type EP 630. The machine is in very good condition. The press worked in an engraving company as a test press. Technical data: Pressing force: max. 630 tons. Installation height: max. 325 mm Stroke: max. 275 mm Weight: 4,000 kg

ROBOTS FOR HIGH PRESURE DEMOLITION PUMPS IN GREAT CONDITION. ROBOT CONJET 363, 322 , AND JETFRAME SYSTEMS 102

Qty. 1 Second-hand extrusion press line Mfc.: Breda Sutton, Cometal, OMS Type: oil hydraulic, Dia.: 7 inch, 178 mm Force: 1600 MT Built: 1977 Fully reconditioned in 1995 Scope of supply: Log feeder Billet Furnace Hot Shear Extrusion Press Run-out Table Puller Cooling Bed Stretcher Finishing saw Aging Furnace Die Furnace

Single Column Press Dunkes TYPE: HZS 160 Specifications: Manufacturer: Dunkes Model: HZS 160 Operating hours: approx. 2250 The machine is in good condition and fully functional.

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg

Pressing force: 2000kN, working length: 7200mm, connected load: 15kW, max. oil temperature: 45°C, max. operating pressure: 200bar, max. material thickness S235: 8mm, max. stroke: 215mm, max. closing speed: 200mm/s, pressing speed range: 1mm/s-10mm/s, stop time: 90ms, safety distance: 290mm, weight: approx. 38000kg. Including underfloor equipment and Fiessler AKAS 160 S safety system, year of manufacture: 2013. Documentation available. An on-site inspection is possible.

CONTROLS   conventional PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 100 to SLIDE   slide force: 100 to   stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes for safe tools only

bale press, which had been used for cardboards. serial numbers: PES354653, PES354654 pressing force 50 tons Bale Size: 1200 x 800 x 1100 mm Bale Weight Paper: 350 - 450 kg

Reference Num.: 4274 Brand: BOBST Type: SP 142 CER Construction year: 1995 Available: directly Status: In production Location: Deutschland

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

We would have all these machines as a package for sale. 1x Press brake 160to 3m 1x Press brake 60to 2m 1x KRC 150 robot 1x welding robot cell with Kuka robot and Fronius TPS4000 1x Micron

Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

SLIDE   total force (nominal): 880 to   stroke: 305 mm   cutting velocity min.: 5 mm/s   cutting velocity max.: 70 mm/s   closing velocity: 200 mm/s   returning velocity: 200 mm/s V-RING   nominal force: 400 to   stroke: 40 mm COUNTER RAM   nominal force: 200 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 1010 mm   lower table (front-back): 1600 mm   upper table (left-right): 1000 mm   upper table (front-back): 1000 mm   shut height max.: 460 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 450 mm   sheet thickness max.: 16 mm   feeding step min.: 1 mm   feeding step max.: 999.9 mm   sheet length min: 3950 mm   speed max.: 48 m/min  &nbs ...

Manufacturer: EBERHARDT Schinkenpresse (round) Dimensions of the press: L 820 x W 1000 x H 1960 mm Number of molds: 32 Dimensions of the moulds: L 760 x W 130 x H 65 mm Surface of the moulds electrolytically polished Design: Closed, round sheet metal construction for filling with smoking foil or special paper for drying, smoking and cooking in a single operation. Weight: 340 kg The press is easy to use. The machine is made of stainless steel and acid-resistant components. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Slotted Hole Drilling Machine Scholz Type L4 Machine No. 4905 Motor power 2.2 kW With 1 hold-down device on the table Table can be moved to the left and right Drill motor can be moved forward and backward Table size 560 mm x 250 mm Height-adjustable table Flat belt drive Weight with pallet 305 kg Shipping dimensions 1320 mm x 800 mm x H 1500 mm

Folding Sheet Press Heidelberg PS 86; cleaned; Format width max.86cm, min.12cm; Inlet length max.25cm, min.10cm; including coupling box 1. Pressing unit Heidelberg PS 86; Cleaned; Size max.86cm, min.12cm; Length max,25cm,min.10cm; included link box.

Inv. Num. : 8688 Type: Beyeler PR 150 IPC Producer: Bystronic Created: 2004 Parameters: Compressive force: 150 t Maximum bending length: 3100 mm Stroke: 215 mm Machine weight: 10000 kg Machine condition: out of order

Membranpresse modell FISMA 210 (ITALIEN) Arbeitsgröße: mm 2100 x 1200 Öffnung mm 500 Arbeitshöhe mm 250 Öffnen und Schließen des Deckels mit vertikalen Pneumatikkolben Diese Presse eignet sich zum Furnieren von Formteilen wie Fensterflügelrahmen und gebogenen Teilen Oberheizung mit Heißluft Beheizung der Unterseite mit Heißluft Verbrauch approx. 9 kWt Arbeitszyklus: approx. 10 Min. Kompletter Kompressor zum Anheben der Abdeckung und unter der Abdeckung Verarbeitungsvorvakuum einstellbar bis 6,5 atm

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

The machine is in good technical condition, testing is possible by prior arrangement.