press for frame used for sale

Knife for Kalmeijer KGM Pastry Forming Machine NewâœProduct Descriptionâœ" Manufacturer: Kalmeijerâœ" Condition: Newâœ" Length: 31.5 cmâœ" Width: 2 cmDetails see picture

Gear Figurine Roller for Kalmeijer Pastry Forming Machine KGM New â Product Description âœ" Manufacturer: Kalmeijer âœ" Condition: New âœ" Material: Plastic âœ" Diameter: 10.5 cm âœ"  ̃ Hole: 2 cm âœ" Width: 2 cm Details see picture

Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1263.920 C Order Number : 1600.905 C Order Number : 1600.900 C Order Number : 1120.920 C Order Number : 1120.919 C Order Number : 1100.935 C Order Number : 1100.940 C Order Number : 1383.919 C Order Number : 1270.900 C Order Number : Special Rollers  See picture for details

Model: VVM2 Condition: Used Serial Number: 2043114-1 Stock Number: 2765J Flow divider 2 lane Belt width: 270 mm Power: 3 x 400V, 50Hz, 16A Dimensions; 1750 x 1350 x 1900 mm

Load capacity: 5000kg, mast type: triplex, lift height: 5000mm, free lift: 1355mm, fork dimensions X/Y/Z: 1220mm/150mm/55mm, machine dimensions X/Y/Z: approx. 4300mm/1550mm/2500mm, weight: approx. 8100kg, operating hours: 176h. Documentation available. An on-site inspection is possible.

A vertical high-performance flow wrapping machine Robert Bosch is available. Format range: 360mm, packaging capacity: 80bags/min. An on-site inspection is possible.

120 x 80 x 190 cm

diameter range 6 mm number of dies 4 number of stations (incl. cut off) 5 max.width across flats 6 mm output - pieces/min 350 cutting length 4 mm thread diamter M2-M3

diameter range 64 mm max. width across flats 56 mm max. outside dia. of round pieces 64 mm bar dia. 18-40 mm cutting length 20-72 mm output - pieces/min 140 number of forming stations 3 press power 230 t

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 920 mm -Cross-section: 125 x 40 mm -Photography: see technical drawing in the photos -Dimensions: 1070/600/H125 mm -Weight: 136 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1000mm -Cross section: 120 x 40 mm -Recording: 500 mm (see sketch in the photos) -Transport dimensions: 1155/700/H120 mm -Weight: 132 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 700mm -Cross section: 140 x 50 mm -Recording: 400 mm (see sketch in the photos) -Transport dimensions: 845/945/H140 mm -Weight: 186 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1180 mm -Cross-section: 150 x 60 mm -Recording: see technical drawing in the photos -Transport dimensions: 1400/905/H185 mm -Weight: 264 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Hydraulic pump for pedestrian stacker make: Climax Handling -Gear pump for: electric forklifts -Bicycle pump type: -with: tank and control valve -Drive: 24 V -Dimensions: 320/105/H295 mm -Weight: 12 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gear, electric motor, DC motor, traction motor, drive motor -Voltage: 48 volts -Power: 5kW -Speed: 1900 rpm -Drive motor for: lifting work platforms from GSL (German Standard Lift) -Pump: Lamborghini MLPS/BCX/208/F -Number: 3x available -Price per piece -Dimensions: 210/H470 mm -Weight: 42kg

Control device for electric forklift, electric motor, DC motor, traction motor, drive motor, motor control, motor controller, control, drive control, voltage converter -Manufacturer: Linde, forklift control with voltage converter from forklift Linde R14 -Type: LDC-32/10-HE01 390 360 53 68 Inverter 79 174 01 236 -Dimensions: 265/170 / H55 mm -Weight: 1.5 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump: for electric forklifts -Gear pump type: 1 547 220 500 / 0 542 015 083 271 -with tank and control valve -Drive: 24V 2kW -Dimensions: 140/200/H370 mm -Weight: 10kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Rexroth, hydraulic pump from pedestrian stacker JungheinrichTyp ERC 205 -Gear pump: Type 0541 100 054 -Drive: 24V 3kW -Number: 2x unit available -Price per piece -Dimensions: 140/130/H330mm / 150/130/H330mm -Weight: 14.3 kg / 13.9 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from order picking forklift type ECE 20 -Hydraulic pump: Type 50125677 -Motor: Type AU3480 24V 1.5kW -Dimensions: 200/175/H360 mm -Weight: 9.7 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from order picking truck Jungheinrich type EJE-KmS -Hydraulic pump: type 0 542 015 145 -with: tank and control valve -Dimensions: 180/160/H370 mm -Weight: 11 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, charger type Timetronic E230 G 24/65 B-ET -Input voltage: 230V 50-60Hz -Power: 24V/65A -Number: 1x charger available -Dimensions: 500/490/H7355 mm -Weight: 53 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic unit from Jungheinrich order picking forklift type EJE-KmS 16G-24-140-56 -Hydraulic pump: Type 0 542 015 145 -Motor: Type 1 547 220 506 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 210/180/H370 mm -Weight: 11 kg/pc.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 118 -Hydraulic pump: type 50125677 -Motor: Type AU3480 AMJ5729 24 V 1.5 kW -with: tank and control valve -Number: 4x unit available -Price per piece -Dimensions: 200/180/H370 mm -Weight: 10 kg/pc.

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump, hydraulic unit from Jungheinrich electric forklift type ECC 10 G 115-90 E -Hydraulic pump: Type 0 542 015 121 -Motor: Type 1 547 220 532 24 V 2 kW -with: tank and control valve -Number: 2 units available -Price: per piece -Dimensions: 220/150/H520 mm -Weight: 10 kg/pc.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Jungheinrich ESE 320 G 20-240-54 -Hydraulic pump: Type 0 542 015 191 -Motor: Type 1 547 220 535 24 V 2.2 kW -with: tank and control valve -Dimensions: 175/160/H365 mm -Weight: 9,6 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Jungheinrich type ECE 20 -Hydraulic pump: Type 0 542 015 191 -Engine: Type 1 547 220 524 24 V 2.2 kW -with: tank and control valve -Quantity: 2 pieces available -Price per piece -Dimensions: 220/120/H370mm -Weight: 9 kg/piece

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 20 -Hydraulic pump: type 5090979 -Motor: Type AU3480 24V 1.5 kW -with: tank and control valve -Dimensions: 200/180/H370 mm -Weight: 9.8 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: Schwabmüller, hydraulic pump from Kaiser Kraft UNI-GV 10/25 UNI 10/25 pallet stacker -Motor: Type UP 10.5/112.79.89 12 V 1.5 kW -Dimensions: 210/200/H465 mm -Weight: 13 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from Rapid RVT 2500 electric forklift -Hydraulic pump: Hidroirma type UP100K163-01 -Motor: Efel 36808 24 V -with: tank and control valve -Dimensions: 210/170/H360 mm -Weight: 10.5 kg

Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Type: DIN 6315 B 40 x 400 -Slot width: 40 mm -Dimensions: 405/100/H60 mm -Weight: 10.9 kg

Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1190 mm -Cross-section: 150 x 65 mm -Photo: 600 mm (see sketch in the photos) -Transport dimensions: 1430/910/H190 mm -Weight: 280 kg

Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow, snow pusher -Manufacturer: Schulte-Henke, Snowplow type RKS 200 DFG 4035 A -Sign length: 2000 mm -Plow height: 520 mm -with: Spring-loaded flap drive-over system -Recording: Dimensions see photo technical drawing -Plow: mechanically adjustable -Attachment: to forklifts or similar -Transport dimensions: 2000/800/H660 mm -Weight: 230 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Benning, charger Belatron type E 220 G24/40 B-FB -Input voltage: 220V 50Hz -Power: 25.2V/40A -Quantity: 2x charger available -Price per piece -Dimensions: 550/410/H780 mm -Weight: 53 kg/pc.

Electric forklifts, electric forklifts, electric forklifts -Manufacturer: Linde, electric forklift truck type E20 -Load capacity: 2000 kg -Lifting height: 3800 mm -Tine length: 1250 mm, cross section 125 x 45 mm -Operating hours: 10270 h -Battery: Type 4 PzS 620K 80V -Accessories: including charger Varta 80 V / 125 A see photos -Dimension: 555/520/H690 mm / 162 kg -Dimensions of the stacker: 2030/1150/H2300 mm / with mast height 2500 mm -Weight: 2890 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier -Manufacturer: Sonnenschein charger dryfit TL 24V 260-300 Ah -Input voltage: 220 V -Power: 24 V / Battery capacity 260-300 Ah -Quantity: 1x charger included -Dimensions: 600/410/H450 mm -Weight: 40 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1095mm -Cross section: 200 x 60 mm -Recording: see sketch in the photos -Transport dimensions: 1300/900/H200 mm -Total weight: 250 kg

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor, wheel loader mount, adapter frame, universal carrier, fork carrier -Wheel loader mount: fork carrier, solid design -Mounting: Shaft Ø 38/ 51 mm, dimensions see photos -Forks: can be supplied for an additional charge, large selection available -Dimensions: 1000/170/H670 mm -Own weight: 134 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1080mm -Cross section: 150 x 55 mm -Hole: Ø 50 mm, see photos -Dimensions each: 1180/150/H875 mm -Total weight: 120 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Still EFG 1.5/5004 -Hydraulic pump: Type 0 510 415 314 -Engine: Type GP 116-14/5.5 24 V 5.0 kW -Dimensions: 320/200/H220mm -Weight: 36 kg

Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, various designs -Slot width: 15/18 mm (see photos) -Submission/Price: complete -Dimensions: 150/42/H26 mm 2 pcs / 200/50/30 mm 4 pcs / 200/49/30 mm 4 pcs -Transport dimensions: 200/190/H105 mm -Weight: 12.8 kg

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, forklift -Fork carriage: with forks -Load capacity: 12,000 kg -Make: Still -Forks: length 1600 mm / 200 x 100 mm -Installation dimensions: see photos -Dimensions total: 3000/2100/H1530 mm -Weight: 2480 kg

Electric forklift, electric stacker, e-stacker, 3-wheel forklift -Manufacturer: Toyota, Electric forklift 3-wheel forklift type FBESF 15 -Load capacity: 1350 kg -Lifting height: 3300 mm -Voltage: 24 volts -Tine length: 1090 mm, cross section 80 x 40 mm -Equipment and accessories: Sideshift, clear-view mast, charger, lighting system -Operating hours: 20293 h -Battery: ibv type 8 PzS 920 K 24 V built in 05/2009 -Forklift dimensions: 1780/1050/H1980 mm / with mast height 2120 mm -Weight: 2800 kg

Lifting mast, stacker mast, forklift mast, lifting frame, rear forklift -Manufacturer: Baumann, forklift mast from sideloader -Type: unfortunately no type designation -Load capacity: 2500 kg -Lifting height: mm -Recording/Dimensions: see photos -Dimensions: 3940/1680/H2060 mm -Transport dimensions: 3940/1680/H700 mm -Weight: 1800 kg

Lifting mast, stacker mast, forklift mast, lifting frame, rear stacker, triplex mast -Manufacturer: Clark EML, forklift mast triplex mast type 7000 T -Load capacity: 5000/800 kg -Lifting height: 7500 mm -Height: 3860 mm -technical data: see photo type plate -Recording/Dimensions: see photos / technical drawing -Dimensions: 3730/1300/510 mm -Weight: 2100 kg

Lifting mast, stacker mast, forklift mast, lifting frame, sideloader -Manufacturer: Baumann, forklift mast from sideloader type E4S 25/14-13.5 -Load capacity: approx. 2500 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Transport dimensions: 3900/1445/H700 mm -Weight: 1630 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from electric high lift truck Linde L 12 -Hydraulic pump: Type A5088869 -Motor: 24 V 2.2 kW -Hydraulic tank -Dimensions: 305/157/H540 mm -Weight: 11.6 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, forklift motor with gearbox, electric motor, DC motor, traction motor, drive motor -Manufacturer: Juli, drive motor with hydraulic pump from electric forklift -Type: GP 116-14/7.9 -Voltage: 48 volts -Power: 9.0 kW -Speed: 2900 rpm -Individual components: see photos -Dimensions: 460/400/270 mm -Weight: 41 kg

Light barrier, frame light barrier, inductive sensor, electronic sensor, proximity switch, fork light barrier -Manufacturer: Balluff, fork light barrier -Type: BGL001J BGL 50A-001-S49 -Voltage: 10...30 V DC -Number: 2 sensors available Price: per piece -Dimensions: 90/70/H10 mm -Weight: 0.1 kg/pc.

Lifting mast, forklift mast, forklift mast, lifting frame, rear forklift, clear view mast -Manufacturer: Linde, forklift mast, unobstructed view mast from front forklift type H30T -Load capacity: 3000 kg -Lifting height: approx. 3500 mm -Dimensions: see photos / technical drawing -Transport dimensions: 2500/1150/H330 mm -Weight: 725 kg