press for frame used for sale

Charger 24V 80A with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45450-3550

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk A mast that is too high can be dismantled and loaded for transport on request. Youtube function and status video: https://youtu.be/bSXCpdbzEe4 - Former Linde full-service device - Next service due in 633 operating hours - UVV valid until 04/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Full cabin with radio, heater and windshield wipers - StVZO lighting with turn signals for road approval - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45450-18

3 PIECES 24V 375Ah batteries from former Linde Service Very good performance measured at 24.99, 25.05 and 25.46V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1132

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3685

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/wUiF5B2PZCY - Former Linde full-service device - Next service due in 739 operating hours - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Semi-cab with windshield wipers - LED front work light - LED work light at the rear - Warning light orange - Comfort seat Auction-ID: A1-45450-249

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/UWfZH8czO80 - Former Jungheinrich full-service machine - Battery: 01/2021, 48V 4PzS 500Ah, very good performance measured with 50.0V - Roof pane - Side fall-out protection (can be easily dismantled) - LED front work light - Warning light orange - Comfort seat - Attention: Motor makes a scratching noise (carbon brushes may be due?!) Auction-ID: A1-45450-283

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3441

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/LXsMjmBIZSE - Former Still full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 41/2025 48V 625Ah, very good performance measured at 50.7V - Triplex mast with full free lift - 3rd valve, sideshift - White non-marking tires - LED front work light - Comfort seat with lumbar support and seat heating Auction-ID: A1-45450-100

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3534

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/TCmMUzOKe20 - Former Linde full-service device - Battery: 2021 regenerated by Linde 49/2025 capacity 95%, 48V 775Ah, very good performance measured with 50.3V - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - LED front work light - Blue Safety Light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45450-106

Battery for Linde E70 and E80 from former Linde service, measured with very good performance 88.89V 80V 1.376Ah 80V/8PzS/1376Ah Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1156

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3642

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3657

Battery from former Still Service Comes from Linde E30 with only 6,800 operating hours. With REMA plug and Aquamatic water filling 1020x850x630mm Voltage at rest uncharged measured with very good power of 85.63 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1171

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/jkFSkRyY75c - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 80V 5PzS 775Ah, very good performance measured with 82.7V - Clear-view mast without central hydraulic cylinder - 3rd valve; with sideshift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45450-60

Youtube function and status video: https://youtu.be/HX8_KF9h8M0 Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: Linde 03/2018 48V 625 Ah, with good performance; measured at 49.4V - Duplex mast with full free lift - 3rd valve; Sideshift - 4. Additional valve free for fork adjuster - Linde safety Pilot with scale, lift height and stroke angle indicator Auction-ID: A1-45450-44

3 PIECES 24V 375Ah batteries from former Linde Service Very good performance measured with 24.66, 25.50 and 25.78V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45450-1175

new and unused charger in orig. for batteries with 500-700Ah possible without 16A and Rema plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-8010

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45450-3639

used frame filter press / filter press REWA 1200x1200 chamber number: 50 pieces the arrangement is in an as good as new state.

used, kpl. 1 year warranty, plate size 400 x 400 mm, 13 plates + 12 frames, closed outlet, 30 mm cake thickness, pressure max. 6 bar, capacity approx. 35 liters, filter area 4m2, dimensions 1500 x 800 x 1000 mm, weight 700 kg, hand hydraulics, drip plate, filtrate gutter, with or without Filter cloths, also available as a longer frame with more plates and frames

used, kpl. 1 year warranty, plate size 630 x 630 mm, 40 plates + 40 frame, closed outlet, 40 mm cake thickness, pressure max. 6 bar, capacity approx. 500 liters, filter area 27m2, dimensions 4800 x 1200 x 1600 mm, weight 2.5 tons, hand hydraulics, drip plate, filtrate channel, with or without Filter cloths

To the fully automatic assembling of parts of the frame. Frame dimensions: min. 120 x 120 mm 700 x 2,200 mm 4 heating Rails for preheating the Miters (procedure with the machine automatically) We have several press in our warehouse (various years).

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. weight: 2000 kg Dimensions (L/W/H): 5550x1300x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mm Working height: 2650 mm Number of cylinders: nach Wahl St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Glue press Etienne Format L x B: 3800 x 2700 mm Window frame press pneumatic Weight approx. 890 kg Year of construction 1980 The press is in good condition, ready to use. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Cylinder go Hess frame press with pneumatic 3 vertical and 2 horizontal cylinder

Frame press Hess economic hydraulic 3600 x 2250 mm L x W x H: 400 x 100 x 270 cm Weight approx. 1100 kg year 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm 1050 x 2,500 mm 2 heating Rails

EinspannmaÃ?e: 1600 mm x b: 2900 mm frame: 1600 mm x b: 2600 mm â?¢ Pression-Druck by 1T, self-locking, 140 mm â?¢ Versatility - many applications (frame, body, surface gluing) â?¢ Workload - ergonomic posture â?¢ Save time with user-friendly operation â?¢ Frame are bolted and therefore can be disassembled â?¢ Pressing units galvanized G & FE-RPW-3000PL

Pressing length: 3200 mm Pressing height: 2000 mm Functional principle: Hydraulic (horizontal/vertical) Space requirement mm: 3500 x 1200 x H 2750

TECHNICAL DATA: Working width mm: 3000 Working height mm: 1700 Downholders: 4

Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emerge ...

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic wit ...

Hydraulic frame press Hungerbühler Press-Measurement: 4100 x 3050mm 3 vertical cylinders 3 horizontal cylinders Height adjustment via control box Width adjustment via control box Supports at the bottom for gluing wings at working height. The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

SPECIFICATIONS: Vertical frame press for windows and doors Hydraulic operation machining length mm: 3,000 machining height mm: 2,000 Installed capacity KW: 1.6 Beam 2 horizontal bars 3 Vertical bars with pusher

Frame press Hess hydraulic Type: HYDRO-LUX Crimping dimension approx. L 3550 m x W 2250 mm Connected load 380 V / 50 Hz 2.6kw Hydraulic Pump Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm 0 - 8 bar pneumatic Optoelectronic measurement query. The window scantlings are placed in the feed channel so that the photoelectric sensor can measure whether the pressure beams and press corners need to be opened or closed. If the light beam of the probe hits the window scantlings, the machine receives the command to drive up in width and height until the working dimension is reached. Workflow: Automatic dimensional adjustment loose insertion Automatic pressing process loose presentation remove Automatic dimensional adjustment Program selection options in the control system: 1. Automatic measurement adjustment via optoelectronic measurement query with a ...

Frame press Hess Technical description: - 2 pneumatic pressure cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece holders - Feed bandwidth: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg

Frame Press - Edge Press Standing / Vertical workpiece dimensions - Solder: 2500mm - Width: 1250mm Press pressure motorized, 3-stage

Standard Equipment's Chrome Coated Cylinder Boiled Steel Body Pressure indicator Pressure Adjustment User guide 2 Years Warranty CE

Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

SPECIFICATIONS: Installed power (hydraulic pump): 4 Kw Double pump GR2+GR2 14 cm³+14 cm³ Dimensions: 3500 x 1300 x 2200 mm Output per hour: 100 chairs/h Safety precautions

Machine for the production of backrests of chairs.

SPECIFICATIONS: Double frame press for chair production Hydraulic operation Dimensions: 3500 x 1300 x 2200 mm Protective devices Production: 100 chairs/h

Furniture Door Frame Press V. Grum-Schwensen Type MTP Specifications: • Assembly of frame parts: fully automatic • External frame dimensions min. (mm): 120 x 120 • External frame dimensions max. (mm): 700 x 2500 • Custom size

Height adjustable table Auction-ID: A1-45188-169