press for frame used for sale

SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm Expandable bottom stop Equipped with manual workholding system 02 Pressing devices Hanging control panel Installed power: 1.8 kW

Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Weight of machine approx.: 1,9 ton

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 850 mm   table surface (front-back): 550 mm SLIDE   table surface (left-right): 560 mm   table surface (front-back): 376 mm   spigot hole diameter: 50 mm   stroke: 110 mm   stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 0 mm   stroke max.: 110 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 855 mm   space requirements -front/back-: 1635 mm   total height: 2640 mm   total weight approx.: 5400 kg ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: optional   European CE standards: yes

CONTROLS   conventional PRESS DESIGN   drive system: eccentric / crank   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 100 to SLIDE   slide force: 100 to   stroke rate (max.): 72 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke adjustment: yes   stroke min.: 8 mm   stroke max.: 112 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 407 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes for safe tools only

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 45 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 440 mm   opening in bed (diameter): 40 mm SLIDE   table surface (left-right): 410 mm   table surface (front-back): 280 mm   stroke rate (max.): 110 /min SLIDE (MECHAN. PRESS)   slide adjustment: 65 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 380 mm   distance between columns (H-frame): 360 mm ATTACHMENTS (PRESSES)   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 50 to PRESS TABLE   table surface (left-right): 700 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 440 mm   table surface (front-back): 360 mm   spigot hole diameter: 40 mm   stroke: 90 mm   stroke rate (max.): 70 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 0 mm   stroke max.: 90 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 300 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 700 mm   space requirements -front/back-: 1295 mm   total height: 2360 mm   total weight approx.: 3000 kg

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 80 to PRESS TABLE   table surface (left-right): 860 mm   table surface (front-back): 620 mm   thickness of bolster plate: 70 mm   opening in bed (diameter): 165 mm SLIDE   table surface (left-right): 570 mm   table surface (front-back): 390 mm   spigot hole diameter: 50 mm   stroke: 120 mm   stroke rate (max.): 67 /min SLIDE (MECHAN. PRESS)   slide adjustment: 90 mm   stroke min.: 9 mm   stroke max.: 120 mm   main drive power: 5.5 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 360 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 1420 mm   space requirements -front/back-: 1700 mm   total height: 2990 mm   total weight approx.: 5600 kg

355 x 185 cm, 3 stamps on top, 2 on the side Used machine

PRESS DESIGN   drive system: eccentric / crank   table cushion: yes PRESS FORCES   total force (nominal): 63 to   nominal work capacity: 630 kNm PRESS TABLE   table surface (left-right): 900 mm   table surface (front-back): 560 mm   opening in bed (diameter): 250 mm SLIDE   table surface (left-right): 450 mm   table surface (front-back): 310 mm   clamping surface diameter: 50 mm   stroke: 100 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 80 mm   stroke min.: 17.5 mm   stroke max.: 100 mm DIE CUSHION (TABLE CUSHION)   number of cushions: 1 TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 340 mm   distance table - slide max.: 440 mm ELECTRICAL SPECIFICATIONS   total power consumption: 5.5 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/righ ...

pressure: 2000 t distance between columns: - mm stroke: 140 mm strokes per minute: 15-50 H/min table surface area: 1000 x 1100 mm dimension of ram: - mm weight of tools max.: - kg Shut Height: 650 mm distance table - lower edge of ram: - mm ram adjustment: 25 mm main drive: 30 kW total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - mm Production of stamped and formed parts, mechanical drive with toggle lever drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 55 to PRESS TABLE   table surface (left-right): 750 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 400 mm   table surface (front-back): 300 mm   spigot hole diameter: 45 mm   stroke: 50 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 6 mm   stroke max.: 50 mm   stroke rate (min.): 50 /min   stroke rate (max.): 100 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 310 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1200 mm   space requirements -front/back-: 1500 mm   total height: 2500 mm   total weight approx.: 3850 kg ATTACHMENTS (PRESSES)   strip feeder: optional   fe ...

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 40 to PRESS TABLE   table surface (left-right): 650 mm   table surface (front-back): 380 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 120 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm   stroke: 78 mm   stroke rate (max.): 145 /min SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 8 mm   stroke max.: 78 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 297 mm ELECTRICAL SPECIFICATIONS   total power consumption: 3.05 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1300 mm   space requirements -front/back-: 1100 mm   total height: 2150 mm   total weig ...

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 130 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 700 mm   thickness of bolster plate: 80 mm SLIDE   table surface (left-right): 750 mm   table surface (front-back): 550 mm   stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm   stroke min.: 19 mm   stroke max.: 165 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 525 mm ELECTRICAL SPECIFICATIONS   total power consumption: 11 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1685 mm   space requirements -front/back-: 1910 mm   total height: 3340 mm   total weight approx.: 11000 kg

Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible.

Working width: 3500 mm Working height: 2500 mm # 6913 Hess Quickstep frame press --------------------------------- Sold on behalf of the customer in its current condition Technical data summary (please enquire about any additional accessories included) -------------------------------------- General --------------------------------------- Working width: 3500 mm Working height: 2500 mm Features: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long stroke cylinder) > Horizontal adjustment type: electric > 1 medium pressure bar According to the customer, the control system has been renewed and the hydraulic pump with connections has been renewed (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - t ...

MAWEG frame press with automatic adjustment of height and width Press size 4.50 m.x 2.60 m. Frame Press Size: 5.30 x 3.40 x 1.30 m. Immediately available as pick-up in the workshop Top condition ! Still in operation 2026

Working width: 3648 mm Working height: 2485 mm Number of cylinders: 6 St. Maweg Euronova Quickomat frame press ---------------------------- with automatic measurement adjustment. Cylinder max. opened (maximum working dimensions) W 3,648mm x H 2,485mm Total length: 4,720mm + 400mm control unit Total height: 3,550 mm (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 30 to PRESS TABLE   table surface (left-right): 580 mm   table surface (front-back): 360 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 110 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 9 mm   stroke max.: 76 mm   stroke rate (max.): 140 /min   main drive power: 2.2 kW TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 214 mm ELECTRICAL SPECIFICATIONS   total power consumption: 2.25 kW DIMENSIONS / WEIGHTS   space requirements -left/right-: 1.08 mm   space requirements -front/back-: 1.05 mm   total height: 2.1 mm   total weight approx.: 1800 kg ATTACHMENTS (PRESSES)   2-hand engagement: yes   European CE st ...

pressing area: 3000mm x 1900mm; pressing units vertical: 3; pressing units horizontal: 2; pressing system: elctro - hydraulic; machine length: 3500mm; machine width: 1000mm; machine height: 2600mm; waight: ca. 900kg;

CONTROLS    SIEMENS SIMATIC PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 160 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 970 mm SLIDE   stroke rate (max.): 90 /min SLIDE (MECHAN. PRESS)   slide adjustment: 120 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3200 mm   space requirements -front/back-: 1600 mm   total height: 4400 mm   total weight approx.: 32000 kg

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kW weight of the machine ca.: 280 t dimensions of the machine ca.: m The machine was overtaken 1999. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 t distance between columns: 4150 mm stroke: 1200 mm distance table/blankh.,max. stroke up,adjustm. up: 2100 mm table surface area: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 300 mm die-cushion pressure in pusher: 100 t stroke of drawing cushion in pusher: 150 mm ram surface: 4000 x 2200 mm column travel -side: 1300 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic Control: Siemens S7 height over floor: 7,7 m total power requirement: 300 kW weight of the machine ca.: 280 t dimensions of the machine ca.: 5,75 x 4,3 x 9,55 m Year of construction 1973 Modernization 2005 with oil-hydraulic drive, hydraulically controlled drawing cushion in the table and Ram, hydraulic cutting impact damping stored dismantled - short video available from the sell ...

Working width: 3600 mm Working height: 2600 mm Number of cylinders: 5 St. loading dimensions L x W x H: 4400 x 1150 x 2970 mm weight: 3000 kg Schafberger + Sproedhuber Bavaria Frame Press --------------------------------- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoidi ...

Working width: 3500 mm Working height: 2550 mm Number of cylinders: 6 St. loading dimensions L x W x H: 4500x950x2900 mm Hess Speedy frame press -------------------------------------- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and press ...

Working width: 4000 mm Working height: 2550 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5.000 x 1.200 x 2.900 mm loading dimensions L x W x H: 5.000 x 1.200 x 2.900 mm S+S Bavaria 2000 L window frame and sash press The press was partially reconditioned at our warehouse, immediately available! Technical specifications: - Working dimensions: 4000 mm x 2550 mm (length x height) - Abutment and pressure plate depth: 100 mm - Automatic press cycle for mortise and tenon corner joints - hand control for manual pressing mode - 1 central pressure beam (accommodates heights up to 2550 mm) - 1 transverse pressure unit - 1 shut-off valve for the 3rd vertical cylinder - 1 shut-off valve for the upper horizontal cylinder - 3 controls for angled window processing (vertical cylinders) - 3 attachable pivoting pressure plates for pressing angles up to 60 degrees - 2 extensions for pivoting pressure p ...

General Description Heavy-duty industrial hydraulic press with a nominal pressing capacity of 1,200 tonnes . The machine features a massive straight-side / H-frame construction with guided moving slide and is designed for heavy metal forming, pressing, punching and similar industrial fabrication operations. Technical Details Machine type: Heavy-duty hydraulic press Nominal pressing force: 1,200 t Straight-side / H-frame construction Large hydraulic ram / cylinder assembly Guided moving platen / slide Heavy-duty T-slotted working table Substantial die / tooling assembly installed Hydraulic power equipment Push-button operator controls Heavy bolted steel frame construction Condition Used industrial condition. The press appears substantially complete and remains installed with hydraulic equipment, moving slide, working table and tooling present. The main frame and guides  ...

100 t (100 Mp per Aufstellplan)ca. 22 t (22 Mp per Aufstellplan)40 t (40 Mp per Aufstellplan)560 mm200 mm720 x 720 mmca 3370ca. 2760 mm240 mm120 ms

Power (ton) 60 Table dimensions ( x-y/mm) 890 x 458 Slide Dimensions X-Y (mm) 890 x 458 Stroke (mm) 20 - 76 Slide Adjustment (mm) 80 Strokes type adjustable Stroke per minute 70 - 750 Overhauled in 2021

Hydr broaching press including keyway pressure milling Auction-ID: A1-50090-5

pressure:200 t throat:360 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:780 mm table surface area:740 x 720 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:200 mm die cushion area:530 x 530 mm table height over floor:920 mm ram surface:560 x 560 mm slide drill hole x depth:70 mm power requirement:35,0 kW weight:10,0 t dimensions:1,3 x 2,0 x 3,4 m

pressure:100 t throat:380 mm stroke:650 mm distance table/ram, max. stroke up, adjustment up:950 mm table surface area:800 x 700 mm hole in the table:200 mm table height over floor:920 mm ram surface:630 x 600 mm speed down:65 mm/s speed up:375 mm/s working speed:17 mm/s oil volume:350 l power requirement:18,5 kW weight:9,0 t Dimensions (WxDxH):1,5 x 2,5 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 §20

pressure:6,3 t throat:300 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:450 x 400 mm hole in the table:80 mm table height over floor:700 mm ram surface:50 mm oil volume:90 l power requirement:5,5 kW weight:1,35 t dimensions (WxDxH):1,8 x 2,0 x 2,7 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical

pressure:160 t throat:370 mm stroke:150 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1000 x 700 mm hole in the table:100 mm table height over floor:820 mm ram surface:600 x 520 mm speed down:350 mm/s speed up:350 mm/s working speed:12 - 36 mm/s oil volume:1100 l power requirement:27,0 kW weight:16,5 t dimensions (WxDxH):1,8 x 2,7 x 3,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:motoric adjustable

pressure:100 t throat:450 mm stroke:170 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:3220 x 800 mm table height over floor:850 mm ram surface:3220 x 800 mm speed down:50 mm/s speed up:150 mm/s working speed:7 mm/s oil volume:600 l power requirement:20,0 kW weight:16,0 t dimensions (WxDxH):3,7 x 2,5 x 2,6 m

pressure:160 t throat:360 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:920 x 700 mm Hole in the table:150 mm table height over floor:960 mm passage to the back:590 mm ram surface:620 x 560 mm speed down:390 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:16,0 t dimensions (WxDxH):1,6 x 2,5 x 3,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanisch

pressure:100 t throat:540 mm stroke:560 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1000 x 1000 mm pressure of drawing cushion in table:50 t stroke of drawing cushion in table:200 mm die cushion area:710 x 650 mm table height over floor:910 mm ram surface:1000 x 1000 mm capacity of ejector in ram:2 t ejector stroke in ram:200 mm return capacity:19,5 t speed down:400 mm/s speed up:300 mm/s working speed:57,7 mm/s oil volume:650 l power requirement:37,5 kW weight:15,0 t dimensions (WxDxH):1,5 x 2,5 x 4,45 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion / ejector in table:hydraulisch ejector in ram:hydraulisch depth stop:mechanisch

pressure:40 t throat:360 mm stroke:500 mm distance table/ram, max. stroke up, adjustment up:660 / 1000 mm table surface area:630 x 500 mm hole in the table:200 mm table height over floor:1060 / 720 mm ram surface:450 x 360 mm speed down:60 mm/s speed up:300 mm/s power requirement:7,5 kW weight:2,75 t dimensions (WxDxH):1,0 x 1,8 x 3,05 m additional plate in table:height approx. 340 mm

pressure:40 t throat:360 mm stroke:400 mm distance table/ram, max. stroke up, adjustment up:600 mm table surface area:620 x 500 mm pressure of drawing cushion in table:16 t stroke of drawing cushion in table:150 mm table height over floor:850 mm ram surface:300 x 250 mm speed down:200 mm/s speed up:200 mm/s working speed:40 mm/s power requirement:11,0 kW weight:2,8 t dimensions (WxDxH):1,1 x 1,7 x 3,0 m drawing cushion in table:hydraulisch