128,261 used machines on RESALE, but how to find them? Machine Search
Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg
diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Those dough dividers and rounders allow you to make 30 identical products in 1 work cycle. The products can be cut into pieces or rounded - depending on your needs! Weight ranges: Fortuna 3: 32-80 g Fortuna 4: 40-110 g Both machines are available both in semi- and in full automat. If you have any questions, don't hesitate to contact me via phone, mail or whatsapp!
Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg
Faceplate, faceplate chuck, four-jaw chuck -without: screw-on jaws Manufacturer: Forkardt -Mouth size: Ø 610 mm -Cone holder short cone: 8 (139 mm) -Weight: 121 kg
Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Quantity: 1 piece available -Price: per piece -Weight: 60 kg
CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 5 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.28 kg
Asphalt paver Fortress Allat 450P. maximum width 3m. Two conveyors.
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Beeks: hard -Chuck size: Ø 250 mm -Short taper mount for: bayonet disc -Short taper mount: Ø 139.719 mm -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 44 kg
Used truss for a forklift truck from Bauer - Südlon
CNC drawbar, tool holder, tool holder, milling tool holder - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg
Bread roll system Fortuna Premium S + Fortuna KM 4 - Bread roll system Fortuna Premium S 4 rows - Manufacturer: Fortuna Maschinenbau Holding AG - with pretzel spout - 400 volts 50Hz - 6.13 kW - Built in 2008 Head machine Fortuna KM4 - 400 volts 0 Hz - 1.2 kW - Built in 2002
Diesel generator / new and unused Make: Ford Model FDT10200SE Voltage: 230 V and 400 V Continuous power: 7.5 KvA Short-term maximum power: 7.9 KVA corresponds to 9.75 kW Pure Sine Wave: Yes Frequency: 50Hz Starting Method: Electric Volume: 72 dB ATS: No Fuel tank capacity: 14 litres Fuel: Diesel Weight in kg: 168 kg Runtime: 7 hours at 75% load Dimensions (LxWxH): 920 x 520 x 720
High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg
Fortuna bread roll system Type: KM5 5-row Fortuna Head Machine Fortuna proofing cabinet Peeling tape sheet metal deposition 58x78cm Mehler digital control Technical data: 380V – 50Hz
Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 100 x 5 mm -Dimensions: 280/100/H980 mm -Weight: 10 kg
table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inert gas welding machine, inert gas device, welding rectifier -without wire feed -Max. welding power: 350 A -Dimensions: 700/600/H1400 mm -Weight: 62 kg
CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 8 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.6 kg
Polin Forno Wind4060 Oven Serial: 1104034 2011, stainless, electric oven, 10 trays with cooling rack underneath, adjustable temp and timer controls, 3Ph
Conveyor blower, Fabr. Siemens, Type 2 CH 6 042
Semi-automatic, Fabr. Fortuna 3, 32 - 70 g
Semi-automatic, Fabr. Fortuna 3, 32 - 70 g
Semi-automatic, Fabr. Fortuna 3; 30 pcs, size 3 / 32 - 70 g
Fully automatic machine, Fabr. Fortuna Automat Gr.3
Semi-automatic, Fabr. Fortuna 3, 30 pcs, size 3 / 32 - 70 g
machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice drilling machine vice -Clamping jaws: 100 x 45 mm -Clamping depth: 75 mm -Dimensions: 230/140/H60 mm -Weight: 2.7 kg
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 300 bar -Flow rate: 20 l/min -Individual components: see photos -Dimensions: 1500/1030/H1210 mm -Weight: 555 kg
Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Type: FWB 315/425 -Width: 36mm -Bore: Ø 13 mm -Total dimensions: 145/110/H62 mm -Total weight: 6.3 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece soft jaw set -Width: 20mm -Total dimensions: 84/60/H40 mm -Total weight: 1.1 kg
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Smugglers/smugglers conveyor technology Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 1790 mm Total width inside: approx. 2300 mm Conveying width incl. motor: approx. 800 mm Conveying width without motor: approx. 710 mm Roller spacing/ axle spacing: 120/65 mm Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (037 KW) Includes side guide Feet to be ordered separately. In stock: 1 Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made soluti ...
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ rollers Manufacturer: AMI Fördertechnik Year of construction: 2013 Condition: Used Drive type: Flat belt Total length: approx. 3800 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Wheels/axle distance: approx. 65 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 40 mm Including 2 SEW motors (0.37 KW) In stock: 2 pieces Price per meter The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics F ...
Dial indicator, dial gauge, measuring probe, measuring probe, precision dial gauge -Manufacturer: Format, precision dial gauge 10mm -Measuring range: 0-10 mm -Reading accuracy: 0.01 mm -Outer diameter: 58mm -Case dimensions: 130/75/H30 mm -Weight: 0.2 kg
Key data: 510 mm, 2250 mm, 4 St.
Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Roller Conveyor / Conveyor Conveyor / Rollers with Drive incl. acceleration motor / roller Model: Flat Belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total length: approx. 1860 mm Total width incl. motor: approx. 830 mm Total width without motor: approx. 695 mm Conveying width: approx. 600 mm Wheels/ axle spacing: approx. 65 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 35 mm Colour: Light grey Including 2 SEW motors (0.37 KW) Feet to be ordered separately Stock: 6 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high load ...
Vernier caliper, caliper, vernier caliper -Manufacturer: Format, caliper caliper -Measuring range: 0-250 mm / 0-10 inches -Measurement accuracy: 0.05 mm / 1/128 In -Dimensions: 360/140/H9 mm -Weight: 0.4 kg
weight: . kg taper MK: .. Different jaw sizes and makes. Price information is not possible without a visit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg
Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 without clamping jaws -Chuck size: Ø 400 mm -Bolt circle: mm -Through hole: 102 mm -Total dimensions: Ø 400 x 125 mm -Weight: 90 kg
maximum number of results exceeded
please refine your search
