press for a used for sale

Key data: 1000 , 89 , 30

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...

Servo motor, electric motor, DC motor -Servo motor comes: from a machining center BJM type ALBZ-145 -Max. Speed: 2500 rpm -Power: 4.55 kW -Torque motor: 23.2 Nm -Construction: B5 -Dimensions: 320/138/H180 mm -Weight: 16.4 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

WE HAVE A NUMBER OF SPARE PARTS AND TOOL BOX FOR MC 18 AND MC 30 GAULING HOMOGENISERS

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Topslide: PA61240-0300 -Stroke: 300 mm -Piston diameter: 63 mm -Piston rod: 20 mm -Dimensions: 510/65/H65 mm -Weight: 3.5 kg

Safety switch, safety interlock -Type: AZM 161SK-12/12RK-024 -Protection class: IP 67 -Locking force maximum: 200 kg -Volt: 230 V. -Number: 14x available -Price: per piece -Dimensions: 130/90/H30 mm -Weight: 0.4 kg

DC brake, braking device, electric motor brake -Manufacturer: AER, Statomat braking device type B 122420 / V16 -Current: 50 A -Operating voltage: 380 V -Control voltage: 220V -Dimensions: 160/140 / H135 mm -Weight: 1.6 kg

Measurement data acquisition device, test device, telemetry system -Axon: J1-CS10 Torque Telemeter -Dimensions: 205/60/H110 mm -Weight: 0.8 kg

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Carriage: Impeller damaged, see photo -Motor: 2 kW -Vibrating bottle: length 430 mm -Hose length: 6 m -Dimensions: 1380/580/H600 mm -Weight: 87 kg

Servo motor, electric motor, DC motor -Max. Speed: 3000 rpm -Power: 3.42 kW -Torque motor: 14.9 Nm -Shaft: Ø 32 x 58 mm -Construction: B5 -Dimensions: 320/138/H165 mm -Weight: 15 kg

Industrial Ethernet switch, network switch, LAN switch, rail switch -Manufacturer: Avantech, EKI Switch -Type: EKI-2525-AE -Outputs: 5 -Voltage: 12-48 VDC -Dimensions: 100/35/H150 mm -Weight: 0.6 kg

Three-phase motor, electric motor -Handover: in the current state as viewed -Holding foot: damage see pictures -Power: 7.2/12 kW -Speed: 750/1500 rpm -Shaft: Ø 42 x 110 mm -Construction: B3 -Dimensions: 640/310/H370 mm -Weight: 115 kg

Tool holder, milling holder, milling tool, cutter head -Adapter: SK40 M20 2 pieces -Sizes: see pictures -Price: complete -Dimension box: 205/105/H140 mm -Weight: 3 kg

Wire electrode, welding wire, welding wire -Manufacturer: Avesta, welding wire 316L-Si/SKR-Si -Thickness: Ø 1.2 mm -Dimensions: Ø 300/100 mm -Roll weight: 15.9 kg

Stick electrodes 3.25 x 350 -Manufacturer: Avesta -Type: 309L Ø 3.25 x 350 mm -Dimensions: 375/65/H65 mm -Weight: 4.3 kg

TIG welding rod, welding wire -Manufacturer: Avesta -Type: 307 Si Ø 1.6 x 1000 mm -Mat.nr.: 1.4370 W 18 8 Mn -Package dimensions: Ø 42 x 1010 mm -Weight: 5.2 kg

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE 012/PCN 806734 -Connections: 1/2 ODF -Dimension box: 135/95/H50 mm -Weight: 0.3 kg.

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type ALK 37/4M -Power: 4 kW -Speed: 1410 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Dimensions: 460/310/H270 mm -Weight: 38 kg

Electric motor, three-phase motor -Manufacturer: VEM, electric motor type ALK 37/4M -Power: 2.6 kW -Speed: 1410 rpm -Shaft: Ø 28 x 60 mm -Construction: B3 -Number: 2 motors available -Price: per piece -Dimensions: 430/310/H270 mm -Weight: 34 kg/piece

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2910 rpm -Shaft: Ø 38 x 80 mm -Design: B3 -Protection rating: IP44 -Price: per piece -Quantity: 1 piece -Dimensions: 470/345/H260 mm -Weight: 75 kg

Lacquer roller machine, roller application machine, powder coating plant -Powder coating system: used for slats/blinds production -Pneumatic components: Manufacturer Festo -Geared motor: WEG 0.25 kW -Dimensions: 3400/850/H1935 mm -Weight: 746 kg

Measuring transducers, power measuring transducers, real power measuring transducers, analogue converters, frequency/analogue converters -Manufacturer: ATR, f/U converter -Type: WM275S -Price: per piece -Number: 3 piece -Dimensions: 75/23/H110 mm -Weight: 0.1 kg/piece

Saturator Alsim Carbo 20 Used saturator in very good condition with a capacity of 20,000 l/h

Transducers, power transducers, active power transducers, analog-to-analog converters, frequency-to-analog converters, frequency dividers -Manufacturer: ATR Industrie-Elektronik, frequency divider -Type: DM1 B -Dimensions: 75/23/H110 mm -Weight: 0.1 kg

Electric motor, three-phase motor, brake motor -Manufacturer: AEG, electric motor Typ AM160 MV4 Ex -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 42 x 110 mm -Protection class: IP 44 -Construction: B3 -Dimensions: 550/340/H290 mm -Weight: 90 kg

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: for machine tools and systems -min. height: 75 mm -Max. Height: 95 mm -Dimensions: 230/180/H90 mm -Weight: 13 kg

Manufacturer: Pasilac Therm AS Denmark Type: N-35 Year: 1985/ 2022 Output: P624236 60 hl/h

Saturator Alsim Carbo 20 Used saturator in very good condition with a capacity of 20,000 l/h

Siemens Multix TOP ACSS with the following system components: Generator Polydoros IT 55 Tube Opti 150/40/80 HC 0.6/1.0_Bj. 2013 (ceiling hanging) Vertical tripod Vertix TOP • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the man ...

Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 -VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 27/21 mm (pipe size 3/4 /1/2) -Socket: Ø 39 mm -Price: complete -Dimensions: 145/140/H75 mm -Weight: 3.8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 1x 40 mm, 1x 60 mm -Socket: Ø 32 mm -Price: complete -Dimensions: 130/270/H115 mm -Weight: 8.1 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: WMW ABW, rotating center point -Type: ZN 205 -Recording: MK5 -Number: 9x centering tip available -Price per piece -Dimensions: Ø 92 x 270 mm / Ø 92 x 270 mm -Weight: 4.7 kg /pc.

Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Ramo a42 lathe -Quill: electrically driven -Motor: 220/380 V 0.18 kW -Spindle stroke: 300 mm -Recording: MK4 -Dimensions: 790/550/H580 mm -Weight: 98 kg

sheet width: 3100 mm plate thickness: 16 mm pre-bending: 13 mm upper roll diameter: 330 mm lower roll diameter: 300 mm side roll diameter: 240 mm total power requirement: 11 kW Overall size: 5600x1650x1900 mm weight of the machine ca.: 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell a Rego SM4 stop machine. In bakery condition

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 110 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Max. Pressure: 0.8 - 10 bar -Dimensions: 160/70/H70 mm -Weight: 1.3 kg

Universal screwdriver, construction screwdriver, screwdriver, electronics screwdriver, hand drill -Nominal input: 740 watts -Max. drill bit: Ø 13 mm -Connection: 220 volts Quantity: 1 available -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request

Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request

Three-phase motor, electric motor -Manufacturer: Volta, electric motor from guillotine shears Stankoimport 3218 -Type: AOC2-52-6 - C1 -Power: 9 kW -Speed: 890 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Dimensions: 570/370 / H315 mm -Weight: 112 kg

Tool holder, milling holder, milling tool, adapter, clamping unit -Manufacturer: Walter, 41 pieces holder/clamping units SK50 -Various types: see photos, more pictures can be sent -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg

Centrifugal fan, dust extractor, fan, suction, dust blower, blower -Motor: Ziehl-Abegg ECblue RH56C-ZID.GG.1R -Speed: 1580 rpm -Connection: input Ø 240 mm -Connection: output Ø 450 mm -Dimensions: 995/815/H1060 mm -Weight: 148 kg

Manufacturer: Grundfos Type: CME 3-5 A-R-I-E-AQQE S-A-D-N Condition: as new (short in operation) Pump speed: 3480 1/min Nominal flow rate: 3.72 m³/h Nominal head: 49.62 m Number of wheels: 5 Ambient temperature: -20 .. 55 °C operating pressure: 16 bar Location: Homburg

Tool holder, milling holder, milling tool, cutter head -Recording: SK40 5 pieces Sizes: see pictures Price: complete -Box dimensions: 270/270/H160 mm -Weight: 15.2 kg

Radius milling cutters, end mills, end mills, milling cutters -Cutter: 8 cutting edges -Diameter: 47/65 mm -Socket: Ø 32 mm -Dimensions: Ø 65 x 130 mm -Weight: 1.9 kg

Electric motor, three-phase motor -Manufacturer: ATB, electric motor 132 M type ERY 7.5/4-75 S -Power: 6.8 kW -Speed: 1455 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Protection class: IP54 -Dimensions: 480/320/H265 mm -Weight: 72 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg