press for a used for sale

NEW, suitable for CAT TH407

BIG adapter Kramer large on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

General SKU312X492 LocationBarneveld CEcheck MakeALLGAIER PROCESS TECHNOLOGY GmbH TypeWS-R-V-T-2.80-0.50-0.30 Main Features MaterialStainless steel Motor11 KW Surface2.8 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Continuous operation, pressure/suction mode Product inletø 150 Product outletø 200 Number of sections:3 Air inlet2x ø 400: 2x ø 80 (warm air blending) Air outlet3x ø 250 Vibro motorcheck Motor11 kW (400 V 1475/477 rpm) With variable speed drivecheck With fancheck Motorcheck Capacity500 kg/h wet product With cyclonecheck Heating unit (oil)check (Thermal oil: Heat Exchanger) Max. temperatureApprox. 170 °C: inlet air MaterialStainless steel 1.4301 (304) Information No.380 Year of construction2013 Mounted on mild steel framecheck Floorspace3,9 x 2,25 m Total height2,9 m Extra Specifications Not suitable  ...

Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atl ...

Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection syst ...

Size: 920×1300 mm Equipments: Maximum sheet size 920×1300 mm, minimum size 560×1300 mm opening width within frame 920×1310 mm, maximum die size 910×1300 mm maximum die-cutting area 900×1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now

<br>AGFA APIS-Board UPAC - for old and new PCs (3, 3V and 5V) - for all AccuSets (800/1000/1500 normal & plus), all Avantras (20/25/30/36/44-E/S/XT) and all Galileos (YAG/VS/Thermo)<br><br><br><br>Verf Gbar: now

<br>Spinner for Agfa Avantra 44 s - Clompete general&2011 with warranty<br><br>Verf Gbar: now

<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now

Nitrogen generators membrane or PSA systems for laboratory up to production (500 L/h to several m3/h) No more gas cylinders in laboratory, plant or car repair shop (tyre gas)! Wear-free operation >99.5% pure nitrogen from mostly existing in-house compressed air Constant and safe gas generation guarantees reliable analytical results Operation-free 24-hour operation also in hazardous areas Safe operation due to low operating pressures Economically thanks to fast payback even on a technical scale! N2 production according to the membrane process The nitrogen generators continuously supply nitrogen up to a maximum purity of 99.5%. After the compressed air flows through highly effective filters, the compressed air is decomposed in a hollow fiber membrane module into a concentrated nitrogen flow and an oxygen-enriched portion. The membrane process has the great a ...

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Optionc Inkdrive (ZIP3), DQS, and TIFF output are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

AGFA Viper 3.04 Software rip consisting of dongle, CDs (original 3.01 and update 3.04), APIS board and APIS adapter Available now

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Inkdrive(CIP3), DQS, and TIFF output options are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF connect to open. Open is Connect enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

Alfa Laval Oil Seperator MAB 205

<br>AGFA Apogee Pilot Series 3. Consisting of: CD and latest update, dongle<><br><br>br>Verf Gbar: now

Capstan engine for AccuSet - all the details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

Capstan sensors for AccuSet - all the details can be seen on the picture. The sensors are tested and come from a functional AccuSet. Available on stock

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

cutting knife for AccuSet - all details can be seen on the picture. The cutting knife is tested and comes from a functional AccuSet. Available on stock

motor of the input cartridge for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

input cartridge for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

motor in front of the accretorial cassette for AccuSet - all details can be seen on the picture. The engine is tested and comes from a working AccuSet. Available on stock

cassette for AccuSet - all details can be seen on the picture. The cassette is tested and comes from a working AccuSet. Available on stock

laser unit for ProSet9400 - all details can be seen on the pictures. The lasers come from a functional ProSet. Available on stock

control panel for Avantra25 - all details can be seen on the picture. The panel is tested and comes from a functional Avantra25. Available on stock

cassette for Avantra25 - all the details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

input cartridge for Avantra25 - all details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

Alfa Laval MMB 305 Skid

drive motor for Avantra25 - all details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

input cartridge for SelectSet 5000 - all details can be seen on the picture. The cassette is tested and comes from a workingSelectSet. Available on stock

Kat-No 10-1271 New Container capacity: approx. 15 litres Batch size: 3-10 litres Material: stainless steel V2A 1.4301 Frame construction: mobile Double coat Insulated 3 bar Homogenizer 5.5 kW 500-3000 RPM Agitator 0.5 kW 30 RPM Scraper stirrer 0.18 kW adjustable 10-45 UPM Automatic vacuum control 0.55 kW Lid can be folded manually Display of product temperature Template container left 3 litres for powder components Template container on the right 3 litres for liquid components The price is valid for a process system. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share ...

<br>Complete system - still in production -Avantra 44 with 3600 dpi -AgfaLine 44 - short online processor -Agfa PDF-Rip -Agfa PrintDrive Series 3<br><br><br>Verf Gbar: after 10.07.2011

AGFA AccuSet 1500 plus with AGFA OLP and AGFA PDF-Rip for Windows. System is completely tested and cleaned. Resolutions: 1200, 1800, 2400 and 3000 dpi - including Techkon film densitometer. We will be happy to send you further information and pictures. Available now

Suction wall with exhaust air unit, supply air unit, supply air filter, hot water heating register Suction wall: Make : Krautzberger, built 1992 Dimensions: 2.2 x 3.0 x 0.8 m (approx. BxHxT) Fan: 9,240 m3/h suction power, 2 kW Ex Supply air filter, supply fan, WW heater register: Make : Wolf, built 1999 Fan: 10,000 m3/h suction power, 9 kW Heater: 56 kW, 120 degrees C, 3,500 m3/h Pipeline : supply and exhaust air ducts, deflector hood We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

AGFA Laser for SelectSet 5000. The laser is tested and works - can be seen on the picture. We are happy to send you the high-resolution original image, here the laser beam can be seen more clearly. Available now