press for a used for sale

Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal.  ...

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

ALKO ECO-JET 35/3N clean air extraction Year of construction: 2004 M-Nr.: 33184130 Suction supports: ø250 mm Length: 2.925 mm Width: 1,230 mm Height: 3,440 mm Weight: 816 kg Capacity: 3,000 m3 /uur Pressure: 3,050 Pa Power supply: 4.kW, 380V, 9 Amp Filter surface: approx. 23 m2 Cleaning: compressed air Noise: 77 dB(A)

Servo Amplifier Module, CNC Control System, plug-in card, -Control unit comes from a Hitachi Seiki HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg

Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6058-H334 -Dimensions: 450/250/H180 mm -Weight: 9.6 kg

We offer used: Tetra Pak PT 10 Pull Tab Applicator was in operation with a Tetra Pak TBA 8 1500 ml slim line filling machine Year of construction 1997 In very good condition Subject to prior sale

Addressing device -Manufacturer: IFM -Product type: AC1144 -Weight: 0.3 kg

Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 95 mm -Number: 12x available -Price: per piece

Air filter -Type: 1030 0979 00 -Dimensions: Ø 350/H360 mm -Weight: 4.5 kg

Haemonetics ACP 215 Automated Cell Processor. The ACP 215 Automated Cell Processor is the world's first and only automated, closed-loop red blood cell processing system. It minimizes the risk of bacterial contamination and provides donor centers and hospitals with the security and flexibility they need. Whether your facility is washing red blood cells, stockpiling rare blood supplies, or building a complete strategic blood bank program, Haemonetics is here to help you every step of the way to execute your entire plan.

heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

Horizon Cross Folder Model AFC-504AKT Machine is in stock and is immediately available

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

DOSING, FILLING AND TRAY-SEALING, MONDINI Technical description: Doser model: CD / APM-S Serial number: 1363-1397 Power supply: 400 V, 3 Ph, 50 Hz Hopper capacity: 200 litros Dosing diameter: ? 50 mm Dimensions: 1750 x 1300 x 1980 mm Tray-sealer model: CVS / mt.1 Serial number: 1363-1397 Power supply: 400 V, 3 Ph, 50 Hz Film widht: 135 mm Roller total widht: 195 mm Tray feeder size: 145 mm x 100 mm Tray size: 135 x 85 mm Tray-sealer dimensions: 4300 x 900 x 1960 mm

electric servomotor, electrical actuator for sale. 3 pieces available, 2x original packaging, 1x without

Automatic labeller for the application of self-adhesive vignettes and tamper evident seals. Balcony design. Capacity: up to 180 pcs/min. The machine is equipped with: - PLC SIEMENS, type S7-300. - HMI PC SIEMENS IPC 677 - Dopple REAJET printing system, type HRpro with camera control system - Preparation for Vision System LAETUS WT Commandor - Carton Transport Belt: pitch 250 mm - Various control systems for label presence with ejection etc.

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.18 kW -Speed range: 81-485 rpm -Motor: adjustable -Drive shaft: Ø 14 mm -Construction: B3 -Number: 1 piece of motors available -Price: per piece -Dimensions: 365/200/H190 mm -Weight: 19 kg

Unused Bosch Rexroth axial piston pump. See photos !

Manufacturer: MONTI ANTONIO Laminating-Coating Model: hot melt mod. 908 Type: Fleece and Foam LAMINATION & Coating with COATEM Foam make to inject direct to fabric for Coating. Working widh: 1800 mm Manufacture Date: 2003 (like new with new spare cylinder -hotmelt spareparts) With new spareparts Complete Modernisation in year 2016 with new electricity and software. description: working with SL1 Pleva weftstraitner go to 2 line Lamination Foam or fleece to Fabric

Fan, fan, electric motor, blower -Speed: 1360 rpm -Fan diameter: 500 mm -Hole circle: 540 mm/holes Ø 9mm -Quantity: 1x fans available -Dimensions: 565/565/H170 mm -Weight: 14kg

Antenna cable, extension cable -Manufacturer: Bad Blankenburg -Type: AZ118LL -Length: 4 m -Number: 39 cables available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 0.18 kg/piece

Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg

Compressed air demolition hammer -Operating pressure: 7 bar -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg

Auriol cooking kettle Stainless, 400l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Grinding and polishing machine for the shoemaker's profession, cleaned and tested.

Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation

Auriol M500VBEX cooking kettle Serial: 3430 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Auriol M500VBEX cooking kettle Serial: 3430 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

LBBC Steam Autoclave Max. working pressure 100psi Max. working temperature 200degC Double ended Steam Operation Double doors at both ends Dims 40” (3ft) diam. x 92” (7ft.6”) long Safe work pressure 7.59 bar Vessel type 95/23 With boiler

Truck bed with crane, workshop and power supply in very good condition! Arpo loader crane type Hummel GSK 500 CE year 2015, rope 5mm length 15m, load capacity max 500kg, at 1.5m radius max 350kg. Loading area for mounting on trucks or as a trailer body. Was mounted on truck Mitsubishi Fuso Canter 4x4 DOKA 6C18D Year of construction 2015, manufacturer GEWA Fahrzeugbau. ARPO crane with electric winch, lifting capacity 350kg at radius 1.5m Structure with lockable sliding door, inside small ALUCA workshop with workbench, Drawer cabinets with 100% pull-out, vice, LED lighting and power distribution 400 volts and 220 volts.

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 1x package available -Price: per package -Weight complete: 7.6 kg/package

Servo Amplifier Module -Manufacturer: FANUC -Type: A05B-2400-C060 -Number: 1x converter available -Dimensions: 380/120/H190 mm -Weight: 2 kg

Perkin Elmer PinAAcle 900 F Flame AAS Perkin Elmer AAS PinAACle 900F F Flame AAS True double beam, 8 –lamp mount, Fibre Optic light path automated flame and burner optimization PC and Perkin Elmer WinLab Software Lamps on request Last Service 07/2022 with warranty

Air Filter -Type: MS 246 ALR -Dimensions: 305/305/H246 mm -Weight: 40 kg

Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg

Aluminum table, aluminum work table -made of aluminium -1x ground floor -Border -Feet: adjustable -Dimensions: 2020/900/H960 mm -Weight: 30 kg

Attachment adapter for castor mounting, series 5230, D150mm, A202008199/02, Spanntec, new -40% Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Attachment adapter for roll holder, Series 5230, D150mm x 330mm, Spanntec, - Attachment adapter for winding spigot D75, Series 3233, - Easy to place and fix on the carrier head - Mechanical actuation when carrier head is activated Attention: We have the complete winding drive, rewind drive D75mm and D150mm with servo motor, hypoid gear, additional flange, winding spigot and attachment adapte ...

Tool holder, milling holder, milling tool, adapter -Milling fixtures: Adapter SK50 - MK5 -Intake: SK50 -Tool holder: MK5 -Dimension: Ø 100 x 340 mm -Weight: 8.6 kg

Ref. -No.: 10361 Manufacturer: SCHIESS Year of construction: 2023 Type of control: CNC Control: Siemens, Heidenhain, Fanuc - Configurable as required Storage location: Halberstadt Country of origin: Germany financing: nach Anfrage Support sleeve diameter: 130 mm X-Travel: 3000 mm Y-Travel: 2000 mm Z-Travel: 1600 mm Spindle stroke: 800 mm B-Axis: 360 ° W-Axis: 800 mm Spindle Taper: SK50 Max. Tool Weight: 25 kg Clamping Area: 1250 x 1250 (or configurable as required) mm T - groove width: 22 mm T - slot spacing: 160 mm Swivelling: Configurable as required ° Numbers Of Tools In Magazin: 40, 60, 120, 200, 240 Spindle Speed: 2900 RPM Max. Torque: 2500 Nm Drive Capacity - Spindle Motor: 41 kW

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe

Power supply, converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, dual power supply -Manufacturer: ifm electronic, dual power supply -Type: AC1212 -Number: 1x module available -Price per piece -Dimension: 120/110/H135 mm -Weight: 1 kg/pc.

Refrigerated compressed air dryer from 2004, complete (closed model) 1 available 1100 m3/h, 12 bar Manufacturer: Arctic Star Zander Model No.: AS1100 Type: Refrigerated compressed air dryer Serial Number: 2794660001 Volumetric flow rate [m3/h]: 1,800 Pressure inlet [bar]: 12 Power connection [KW]: 3 Year of construction: 2004 Weight [kg]: 208 Dimensions LxWxH [cm]: 92x97x112

Fan, fan, electric motor, blower, axial fan -Manufacturer: ebm, axial fan type W2G144-AA21-01 -Voltage: 24 V 15W 3000RPM -Quantity: 1x fan available -Dimensions: 180/170/H50 mm -Weight: 0.8 kg

Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)

Ref. -No.: 10347 Manufacturer: FPT Year of construction: 2006 Type of control: CNC Control: Heidenhain 530 Country of origin: Italien X-Travel: 12000 mm Y-Travel: 3500 mm Z-Travel: 1500 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle Speed: 3000 RPM Drive Capacity - Spindle Motor: 37 kW Round table 1 (lxw): 2500x2500 mm Round Table 1 - V: 2000 mm Rotary table 1 max. load: 30000 kg Round table 2 (lxw): 2500x2500 mm Round Table 2 - V: 1500 mm Rotary table 2 max. load: 30000 kg Further information:

Fan, fan, electric motor, blower, axial fan, axial fan -Manufacturer: ebm, axial fan type A2E200-AF02-02 TW -Voltage: 230V 50W -Speed: 2740 rpm -Quantity: 2x fans available -Price per piece -Dimensions: 255/140/H280 mm -Weight: 2.2 kg

Aluminum adhesive tape, aluminum tape, aluminum tape -Manufacturer: kip, ALU-Band 345 DIN-4102-B1 -Type: ALU 901 AC -Length: 50 m -Width: 50 mm -Thickness: 30 mm -Quantity: 5 rolls available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: Ø116 x 50 mm -Weight: 0.5 kg/piece

Hinge, door hinge, folding hinge, angle profile -Angle profile: Material: Aluminum, 45 pieces -Dimensions/recess: see photos / technical drawing -Price/Fee: complete Dimensions: 70/60/H35 mm -Weight: 0.05 kg/pc.

2 New adapter cables for DRO Heidenhain 2 universal extension cables DRO