We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,255 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Equipped with HBM 300 Profi mobile moth extraction with hose. Assembled wooden work table. Diamond saw scoring device, various loose saw blades, both new and used.
used
Equipped with emergency stop, with accessories angle/protractor adjustment
used
The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.
used
Wire diameter: 16mm, number of stations: 5, length: 6700mm, width: 3800mm, height: 3050mm, including sound-proof cabin, straightener, chain hoist, sorting trough, dosing machine, oil mist separator and additional accessories.
used
Voltage: 220/ 380V, nominal current: 8/ 5A.
used
Bear weight: 300kg, lifting speed: 130/min, with documentation, an on-site inspection is possible.
used
Bear weight: 400kg, lifting speed: 125/min, connected load: 30kW, with documentation, an on-site inspection is possible.
used
Bear weight: 500kg, lifting speed: 120/min, connected load: 45kW, with documentation, the scraper is defective, the dovetail is broken, an on-site inspection is possible.
used
Bear weight: 1t, max. impact energy: 27kJ, stroke rate: 95/min, max. stroke: 950mm, working height: 800mm, drop face dimensions: 365x180mm, connected load: 75kW, length: 4125mm, width: 1500mm, height: 3662mm, weight: 20t, with documentation, on-site inspection is possible.
used
Output: 21 bags/min, the screen is defective.
used
Hopper capacity: 80l, starting width: 200-230mm, connected load: 1kW, length: 4500mm, width: 1100mm, height: 1733mm, weight: 1.1t.
used
Resolution: 1440dpi, working width: 1600mm, number of colors: 4, length: 2698mm, width: 845mm, height: 1600mm, weight: 182kg.
used
A large format plotter ROWE RCS 6000-4 with a longitudinal and cross folding system ROWE ROWEFOLD 721-4 and a sorter, counter reading: 170,000 linear meters/ 97,000m².
used
Load capacity: 2500kg, unladen weight: 4115kg. The forklift is still in use and in perfect condition.
used
One forklift including charger. Operating hours: approx. 22000h. Battery defective. Documentation available.
used
Max. load: 910kg, weight: 2.93t.
used
Max. total load: 5t, weight: 8.89t, without accessories, spare parts or documentation, was maintained regularly.
used
Nominal load: 8t, weight: 12.3t, operational hours counter: 5166h, including three meter long forks, without documentation.
used
Including battery charger.
used
The hydraulic brake with the valves have been renewed, the control unit of the lifting mast, control lever for lifting, lighting system repaired, the drive battery 80 V is no longer new but can still be used for normal use, the attachment including fork positioner has signs of wear, the current failure of the attachment has to do with a cable break in the rear control area, with cab and charger, UVV and maintenance up to date.
used
Max. load: 5t, lifting height: 4100mm, installation height: 2971mm, free stroke: 150mm, tires: Super Elastik solid rubber 300-15, Super Elastik solid rubber 250-15, operating hours: 15,200h, with overhead guard SDFHT full cab, heating and air conditioning, double auxiliary hydraulics and pallet clamp Meyer, an on-site inspection is possible.
used
Load: 2.5t, lifting height: 3220mm, length: 2262mm, width: 1199mm, height: 2230mm, weight: 4.4t, an on-site inspection is possible.
used
Load: 7.7t, max. stroke: 3200mm, weight: 5.8t.
used
There are two identical electric forklifts available, connected load: 7.6kW, weight: 8.17t, operating hours of machine 1: 24,063h, on-site inspection is possible.
used
lifting capacity: 2,5 t. Number of working hours: 5380 h : 50 % serial number: G. E.F74 2,7 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The tractor has 16,133 engine hours. When the tractor had just over 10,000 engine hours, the engine was replaced and a new one was installed.
2 Gebr. Variotop stair formwork for the upside down production of straight prefabricated stairs - Stair formwork type 18/150, consisting of base grate with tilting trestles and shoring - Mechanically centrally adjustable step body with swivelling steps -Integrated hydraulic control unit for the tipping process - Height-adjustable longitudinal parking on one side - Hydraulic control unit for the tipping process - Stairs are concreted overhead - max. 18 steps - Max. nominal width of the steps is 1.50 m - Tread range 250- 310 mm
1 Gebr. Column formwork - Twin formwork - Length of formwork 16 m - max. chamber dimension 1.00 x 1.00 m - Steel formwork - incl. 10 vibrators - incl. converter - incl. control system Formwork is hydraulically movable
used
A device for closing trays by Multivac with a capacity of up to 20 cycles per minute. This Multivac T700 packer is in very good condition with only 429 operating hours. This particular model comes with the SKIN packing tool. Tray size: 238 x 166 (D13); New Busch vacuum pump 360m3 / h; Input conveyor; Water cooling unit; Instructions;
used
The machine will be shipped with 3 tools: Tool 1: 2:1 packagingsize 225×170mm (variable forming depth max. product height 80mm); Tool 2: 3:1 packagingsize 225×110mm (variable forming depth max. product height 80mm); Tool 3: 3:1 packagingsize 195×110mm (variable forming depth max. product height 80mm);
used
Form, fill and seal machine for berlingots Form, fill and seal machine for berlingots (with or without spout) of flat pvc or eva film or any film that can be sealed by radiofrequency. Radiofrequency sealing system that allows a very good quality of longitudinal sealing and transversal sealing/cutting. Fully PLC controlled and all operating parameters can be adjusted from the touch screen. Thanks to its specific dosing unit, any kind of aggressive products can be packaged on this machine. All parts in contact with the product are made of stainless steel. Production output: 1800 to 3000 Bags/H Bag volume: from 50 to 500 ml Bag length: 70 to 265 mm Max. outside diameter of the reel: 400 mm Inner diameter: 76 mm Including product outlet belt WIRING DIAGRAMS AVAILABLE
used
Automatic Packaging and ShrinkIng Line Reepack This line is a fully automatic packaging and shrinking line. For a quick overview have a look at the video below. This line consist of the following equipment: Reepack BT 1000 DL Vacuum Chamber belt machine; Reepack ST 80 Shrink Tunnel; Reepack DT 80 Drying Tunnel: 1. REEPACK BT 1000 DL VACUUM CHAMBER BELT MACHINE Vacuum Chamber belt machine suitable for packaging food-stuff in large batches into their bag. An automatic loading conveyor belt permits to move the products in bag and entering in the vacuum chamber for processing. A wide range of bags quality and thikness can be used and in case of shrinkable bags the machine can be fixed in line with an automatic shrinking tunnel and finally an automatic drying tunnel. Technical Data: Vacuum chamber dimension: 1000 x 800 x H250 mm Chamber useful height: 2 ...
used
Features of the machine: 1. 4 compartment sealing for better stability of the bags 2. date stamp 3. valve applicator 4. 2 different moulding tools (e.g. for 250g and 1000g content) 5. conveyor belt loading 6. unloading conveyor belt 7. 4 head linear weigher 8. electronics from Schneider The machine is assembled and can be tested and demonstrated. Specifications: Voltage: 220V / 3Ph (380V) Film type: OPP/CPP OPP/CE MST/PE PET/PE Film thickness: 0.04 - 0.08 mm Film width: 140 - 520 mm Diameter Film roll: 320 mm outer and 75 mm inner Max. Bag Size: 80-160 mm (Front), 40-80 mm (Side), 80-400 mm (Length) Speed: 5-40 Bpm Weight: 750 kg Power: 7KW Horiz. Jaw heater: 4400W 220V Vert. jaw heater: 4600W 220V Air pressure: 0,65MPa Consumption: 0,6m³ / min Dimension: L 1400 x W1800 x H2020 Dismantling and transport must be organised by the buyer. It is 3 years old, h ...
used
Double execution packaging machine for forming, filling and sealing flat envelopes with wet wipes. The machine is in charge of folding and moistening the wipe, forming, lower sealing of the envelope, introduction of the wipe inside and upper sealing. Minimum format: 2 x (45 x 45 mm and 1.5 cc dose). Maximum format: 2 x (65 x 130 mm 20 cc dose). Min/max speed: 45 / 110 upm DOCUMENTATION AVAILABLE
used
Boix Q1530 Tray forming / Tray erecting machine OPERATION : Mechanical, Electrical and Pneumatic BOX DESIGN : PLAFORM, P-84, CITRUS BOX, C-1, BIG EAR, COLUMN ESTIMATED PRODUCTION : 6 Speeds from 800 to 1.800 trays/hour (at intervals of 200) GLUE SYSTEM : By injection, Hot-Melt, Melton NC-16 (cap. 14 kg.)
used
weight max. in kg: 2500 kg stroke: 5170 mm fork length: 1200 mm : 3450 mm Number of working hours: h weight of the machine ca.: 5,0 t dimensions of the machine ca.: 4,0 x 1,26 x 3450 m Gas forklift - Sideshift - extendable tines up to 2350mm - Drivers protection roof - complete Lighting system - very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Continous Form Collator Micro Pack S 50 Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Format / Size max. 330 x 12 Zoll umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Inv. Num. : 4010 Type: RM1 Producer: P/A INDUSTRIES GmbH Created: 2014 Parameters: Maximum sheet plate width: 675 mm Maximum sheet thickness: 1 mm Maximum product length: 10 m Line speed: 50 m/s Al Strip of Thickness: 0 25-0 4 mm
used
Description: For use with forklift trucks Approx. Onsite Dimension. (l x w x h): 1,800 x 1,500 x 1,100 mm, weight approx.: 300 kg
used
Description: Serial number: CTM145 3130 GEF 7097 Nominal load capacity: 1600 kg D: 500 mm H: 3300 mm Approx. Onsite Dimension. (l x w x h): 3,100 x 1,200 x 2,300 mm, weight approx.: 3,000 kg
used
Rectangular duct line from FORMTEK International. 2 reel unwinders/5TB Max Hydraulic drive. Reel width 1000/1250/1500mm 05 to 1.2mm Mild steel (galvanized) Straightening block Z stiffening Male and female clip notching. Combined shear/folder 380V/3P/50Hz CE/EXW certified PRC factory POWER UP IN PERFECT CONDITION CHANGE OF ACTIVITY
used
Description: Fabrication number: 020944 Max. load capacity: 7000 kg Max. lifting height: 4000 mm Read operating hours: 6952 Fork length: 1500 mm With load center distance 600 mm up to lifting height 3300 mm Equipment: with automatic fork adjustment Incl. documentation Attention: a truck with access ramp is required to collect the forklift Approx. Onsite Dimension. (l x w x h): 5,000 x 1,800 x 2,950 mm, weight approx.: 10,000 kg
used
Description: Machine number: 6049234 Nominal load capacity of the forks: 1025 kg Actual load capacity of the support arms: 1600 kg Fork length: 1100 mm Lifting height: approx. 2100 mm Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,500 mm, weight approx.: 700 kg
used
weight max. in kg: 6000 kg fork length: 1900 mm : 89% serial number: GEF 2240 height of stroke: 3300 mm weight of the machine ca.: 9650 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 1250 , 640
HYDRAULIC DOUBLE-ACTING DIE FORGING HAMMER HOU 160 equipped with ejector Blow energy (with installed upper die with nominal weight): 16 [kJ] Nominal weight of upper die: 100 [kg] Blow frequency at nominal capacity approx. 95 [1/min] Ram velocity: 5 [m/s] Ram depth: 460 [mm] Ram weight: 1250 [kg] Ram stroke max.: 640 [mm] Ram stroke min. to reach max. blow energy (distance billet to upper die): min. 480 [mm] Max. die height without dovetails (incl. billet): 320 [mm] Min. die height without dovetails: 160 [mm] Daylight between guides: 580 [mm] Width of frame base: 2290 [mm] Depth of frame base: 1250 [mm] Frame weight: 24 [t] Total weight approx.: 32,5 [t] Total mass to be absorbed approx.: 33 [t] Moving mass approx.: 1350 [t] Height above floor level (assuming insert height 700 m) approx.: 4310 [mm] Total height approx.: 5000 [mm] Main motor capacity (with 400 V / 50Hz) ...
used
Welding edge former, welding bevel former, weld seam preparation, welding edge forming machine, edge milling machine, edge milling machine, mobile milling machine -Manufacturer: Knuth, edge milling machine type 101355 JT-186 -Drive: 0.75 kW -Table length: 500 mm -Angle: adjustable 15 to 45° -Dimensions: 500/360/H290 mm -Weight: 26 kg
used
Weld edge former INDUMASCH SIEGEN Type V 12 Masch. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45 Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 volts, 50 Hz - Flow / return - Built-in guide roller for bevel angle 45 - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm Weight 75 kg good condition; used
used
Description: Nominal capacity 1500 kg ,, A 500 mm B 3030 mm , Weight without battery 2380 kg Battery weight 700 kg Fork length 1500 mm , Including charger : Manufacturer EB, D400 g 48 / 80 B1 - FML Puls , Battery charger 48 Volt UE 400 Volt IEM 8,0 Ampere 50-60 Hertz A truck with an access ramp will be ordered for collection Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 2,000 mm, weight approx.: 3,030 kg
used
Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 120 kg
used
Description: serial number F006A10955X working hours 5767 hours , fork lenght 1800 mm , lifting capacity 6600 kg , lifting height 5400 mm , nominal power 61.5 kW , tires front 8.25 x 15 , dual solid rear tires 8.25 x 15 , solid engine Perkins , serial number AR70417U115570G Read off operating hours: 5,767 h, serial number: F006A10955X, loading capacity: 7 to, Vehicle identification number: AR70417U115570G, lifting height: 4,300 mm, length of forks: 1,800 mm, Approx. Onsite Dimension. (l x w x h): 5,500 x 2,100 x 3,250 mm, weight approx.: 10,280 kg