press for a used for sale

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 480 mm grinding length: 2250 mm centre height: 370 mm throat: 900 mm length of gap: 400 mm bed width: 480 mm turning speeds: 14-1000 U/min spindle passage: 85 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aprovis FriCon Gas Dehumidifier and Desulfurizer Plant for cleaning Biogas. Biogas cleaning plant including APROVIS FriCon 150/500-40-15-2-I0 Gas Dehumidifier and Desulfurizer Plant. Type: ESA 44,8m³ Year: 2019 Fuel: Biogas Scope of supply: Gas Cooler, Air Cooled Liquid Chiller, Base Frame for Gas Dehumidifier, Insulation, Demister DN 200, Syphon. Technical data for Desulfuriser Plant: >3.000 mg/m 3 H 2 S and 600 Bm³/h Gas flow: 600 Bm³/h (at around 37-40 o C) H 2 S-Input concentration: 2.000 ppm (3,000 mg/m³) Gas temperatures (entrance): 25-40 o C H 2 S load: maximum 1.800 g/h Columns pressure loss: < 3-8 mbar Pressure level: 45 mbar (Test pressure 50 mbar) Low pressure: maximum –10 mbar. Minimum inlet pressure: 2-4 mbar Hot water: DN=32 Dung use: app. 3,0 kg per day full load (approx. 110-115 Ct costs 1 kg) Extra air: 11-14 % Container/tank size: approx. ...

(3) Mikrosa SASL 5 CNC (size similar to Kronos M, MX, L) CNC overhaul and retrofit in progress full overhaul and CNC retrofit (pending) komplett Ueberholung + CNC retrofit Grinding wheel 500mm wide x 610mm dia. CNC 5 axis / 5 axis Mikrosa SASL 5 CNC complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul Elimination of hydraulic movements Application CNC Siemens 840D 5 axes controlled in position with digital brushless motors: - Operating wheel axis motor with optical scale - 4 dressing axes: 2 on the grinding wheel, 2 on the regulating wheel - rotating axis with adjustable speed motor on regulating wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to adjust RPM / peripheral speed (m/sec) Set-up for through-feed grinding and still customizable according to custome ...

Tube heaters Manufacturer: Ahrens & Bode Pressure-resistant up to 25 bar

a pasteurization unit with pouch packer for liquid product Find more here - /

Spectrometer SPECTROBLUE FMX36 of the company AMETEK Find more here - /

Plant for fire aluminizing steel wire The total length of the plant is about 56 meters A 01 Wire uncoiler Uncoiling device Uncoiling device A 02 Wire cleaning Electrochemical wire cleaning equipment Ultrasonic wire cleaning device A 03 Wire heating Inductive wire heating Control cabinet Inductive wire heating A 04 Melt preparation - preheating Pre-melting furnace Melting - low pressure furnace A 05 Wire coating Coating device view Coating device A 06 Wire cooling Cooling channel Wire . Quenching tank A 07 Wire - rewinding device Wire rewinding view Wire winder view 2 Total power in KW and total 631 KW 1 Current in A: 593 A Technical performance parameters: Steel wire: C < 1,0 %. Diameter 1,00mm . - 2,00mm Strengths < 1400 N/mm² Coating speed design: Wire diameter: 1,00mm -1,50 mm Maximum coating speed: 120 m/min Wire diameter: > 1,50mm - 2,00mm Maximum c ...

The operating times are specified with 1387 h. However, this is the time that the printer was connected to the network. The pure printing time is 40 h The printer was serviced regularly until last year in March 2022. Technical data Model AGILISTA-3200W Printing material AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) Support material AR-S1 (water soluble support material) Installation space 297 × 210 × 200 mm (A4 size × 200 mm) Resolution 635 × 400 dpi Layer thickness High resolution AR-M2: 15 µm Normal resolution AR-M2: 20µm AR-H1: 20µm AR-G1L/H: 30µm Power supply Supply voltage 100 to 240 VAC, 50/60 Hz Power consumption Max. 750 VA Interface Ethernet 10BASE-T / 100BASE-TX Operation Interactive color touch panel Software Name Mode ...

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

NEW- Unused Beckman Coulter Automate 1250, a high-performance liquid handling system that is designed to meet your laboratory´s needs for precision, accuracy, and flexibility. The Beckman Coulter Automate 1250 is a fully automated liquid handling system that can handle a wide range of volumes, from nanoliters to milliliters, with unparalleled accuracy and precision. It is equipped with a variety of features that make it easy to use and highly reliable, including a touch screen interface, integrated bar code reader, and automated tip loading and unloading. With the Beckman Coulter Automate 1250, you can streamline your laboratory workflow and increase productivity. It is ideal for a wide range of applications, including sample preparation, assay development, and high-throughput screening. Its flexibility allows you to perform a variety of assays, including ELISAs, PCR, and cell-based  ...

ALUKAP350 machine, manufactured in 2012 by K.SCHULTEN GMBH from Germany. The 2012 K. Schulten GmbH AluKap350 is a specialized industrial machine produced by K. Schulten GmbH, a German manufacturer known for its expertise in producing machinery and components for industrial applications, particularly in aluminum processing. The AluKap350 is typically associated with aluminum profile cutting and processing. Machines like this are designed to handle precision cutting and processing of aluminum parts, which are widely used in industries such as construction, automotive, and manufacturing. The model number, 350, might refer to specific technical characteristics, such as the cutting capacity, blade size, or processing capabilities. Key features of a machine like the AluKap350 could include: Precision Cutting: The ability to cut aluminum profiles accurately and efficiently. High Throughput ...

Demonstration system EVT AQUA - L for sale. Year of construction 2020 Equipped with the following options  Goods movement  Spraying device  Surface drainage  2 x heated flood unit  2 x ultrasonic rod transducers 1.5 kW / 25 kHz each  Return sieve  2 x fine filter 25 μm  Hot air drying  Vapour extraction via filter muck  Automatic oil separation Technical data Cleaning medium: Water with cleaning additive Filling volume: 800 dm3 Heating capacity: 30 kW Connected load: 60 kW Compressed air: 6 bar Weight of the system: 3000 kg Throughput: 4 - 6 batches/h 250 kg/h Basket dimensions: 670 x 480 x 320 mm Plant dimensions: 2400 x 2000 x 2450 mm Operating mode: 1-3 shifts Possible Applications: - Water Treatment: - Industrial Water Purification: Designed for treating and recycling water in manufacturing or processing plants. - Wastewater Ma ...

Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - / Contact us at -

Keyence Agilista 3200. Yera 2017. Attached is a photo of the operating hours counter from January 19, 2013. In the meantime, around 100 hours of printing have been added. The device is technically in good condition. Find more here - / Contact us at -

Anton Paar ProveTec GmbH Penetrometer Type: PNR 12 Year of construction: 2022 Find more here - / Contact us at -

Makfil Andromeda 2001 + tool inserts Find more here - / Contact us at -

Casting machine for balancing weights - steel rims Zinc die-cast Serial number: 02887 PLC type: Siemens S7 including spiral conveyor RNA Type SR8-B-250-2L Operating voltage: 3x400V, 50Hz, Control voltage: 24V, PLC control voltage: 24V, Current consumption: 25A, Pneumatic connection values: connection 3/8, Operating pressure: 5bar, Dimensions: LxWxH: 2900x2380x2410mm, Continuous sound level: max. 78dB, Lyzi0m8jq Weight: approx. 1800kg, air consumption: approx. 100l/min, Control cabinet with Siemens control, Update: last 07/30/2021

Chiller 120KW Model ICS Unit: 1 off Aptus ATXA 046 G SE SN R454B LOW GWP refrigerant Air Cooled Chiller Design Criteria - A: 120kW at 6°C / 12°C / 35°C with Run / Standby HH Pumps & Buffer Tank Thermal duty - cooling 120kW Fluid type Water/Glycol Fluid supply temperature 6°C Fluid return temperature 12°C Site External Year 2022

2017 Andritz KMPT GmbH DCF312 / 16 / 4 Andritz - Dynamic membrane filtration Dynamic Crossflow Filter cpl. with control unit Model: DCF312 / 16 / 4 Manufacturer: Andritz KMPT GmbH Year of manufacture: 2017 Condition: As good as new Description: Crossflow processes are used to separate substances that are difficult to filter. In this process, rotating ceramic discs (alternatively: polymer) generate a turbulent differential velocity. With dynamic crossflow filtration, a high degree of separation can be realised, especially with a concentration of the retentate of up to 700 mPas. Ceramic filter discs are available on the market in a wide range of pore sizes from 7 nm to 2 μm. Areas of application: - Colour extraction (e.g. pigments) - Separation of biomass - e.g. in the extraction of enzymes, proteins, proteins, polysaccharides, antibiotics - Recovery of valuable substances -  ...

Key data: 250 KW

2G Agenitor 406 BT70 ready for connection, electrical efficiency is 42.5%. New in original packaging, with warranty. Natural Gas, Hydrogen Ready. Electrical power - 250 kW Thermal power - 264 kW Make and Model: 2G Agenitor 406 BT70 Fuel: Natural gas Year - 2022 Hours: 0 Capacity: 250kW V: 400 HZ: 50 Scope of supply: Engine, Alternator, Frame, Oil Tank, Gas Train, Separate Cabinet with Control System and Operating Unit. Documentation. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

two Self-propelled Multifunctional Amphibious dredging/digging equipment SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. ALYTUS 2.2. PRIENAI 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT (2 identical unites) Basic descriptions: Overall Length – 12,9 m. Moulded Breadth – 6,8 m. Depth – 1,84 m. Max. Draught – 1000 mm. Gross tonnage - 50 (approx.) Net tonnage – 30 (approx.) Total power – 269 kW (Cummins NTA855) Crew – 1 people The lifting capacity of the equipment – 4 t. Maximum suction and digging depth – 6 meters from w ...

Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /

Machine: Cut 25 line Manufacturer: Alpma Type: Cut 25 Year of manufacture: 2003 the Alpma Cut 25 line consists of: Alpma CUT 25 cutting machine Boekels piece scale Auto. Discharge for underweight pieces (cut or section) Auto. Discharge for overweight pieces (first cut or cut-off) Belt for 90° rotation of pieces Accumulation belt/intake belt for downstream form fill and seal machine The line was fully functional and had no defects. It was always maintained. the Boekels is installed on the right (after the CUT 25 cutting machine). Flow direction is from left to right. Documentation is available. Knife width 250mm Max. bar length approx. 800mm 120 cycles/min. A checkweighter is also still available if needed The line is dismantled and stored. If you are interested, you are welcome to inspect the line. Find more here - /

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

2019 Aerzen D52S Rotary piston compressor Find more here - / Contact us at -

Food conveying and processing equipment List of equipment : 1. Dewatering shaker (fabricated in Q4 2020) 2. Weight conveyor belt (fabricated in Q4 2020) 3. Dejuicing shaker (fabricated in Q4 2020) 4. Diagonal shaker (fabricated in Q4 2020) 5. Dryer feeding shaker (fabricated in Q4 2020) 6. Incline belt elevator (fabricated in 2021) 1. DEWATERING SHAKER Dimensions: Length: 3.300 mm Width: 900 mm Features: Fully built in stainless steel. Tray fully built-in stainless-steel plate, composed by: 1 Dewatering screens of 1.000x600mm Juice collecting level and canalisation outside the machine. Vibration by means of fibber springs working at high frequency. Reaction mass in 5 mm stainless steel plate. Isolation by means of rubber silent blocks. Chassis in stainless steel structural profile for the required working height. Powered by-mass motor-vibrators (OLI trademark). Supp ...

Food conveying and processing equipment LIST OF EQUIPMENT: 1.Incline auger conveyor (fabricated in Q4 2020) 2.Fruit declumper/breaker (fabricated in Q4 2020) 3.Metal detector shaker (metal detector head not included) (fabricated in Q4 2020) 4.Redler elevator (fabricated in Q4 2020) 5.Grading shaker with an additional set of screens (fabricated in Q4 2020) 6.Horizontal belt conveyor (fabricated in Q4 2020) 7.Redler elevator (fabricated in Q4 2020) 1. INCLINE AUGER CONVEYOR Dimensions: Length: 2.300 mm Width: 1.500 mm Features: Fully built in stainless steel. Accumulation hopper of 1 m3 capacity made of textured stainless steel. Cleaning window at the lower part of the hopper. Evacuation screw of 300 mm diameter built in stainless steel. Open upper side of the screw for cleaning. Draining valve for cleaning. Upper screens to avoid big frozen blocs. Safety protections.  ...

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

1992 COMBINED CONCENTRATION SYSTEM Type: AFN 454 US The system was in operation for a maximum of 2 months per year. WITH AROMA RECOVERY, USED, REBUILT AND EXPANDED, IN ADDITION TO EQUIPPED WITH NEW COOLING TOWER CIRCUIT EVAPORATOR TYPE OPERATION Horizont TYPE HEAT EXCHANGE al, CONDENSATION AROMA 4-stage EXTRACTION with SYSTEM VERSION: WATER live steam EVAPORATION SYSTEM TYPE > NEW preheating, recovery, cooling mixed condensation semi-barometric rectification - tray column especially for the juice industry 4 840 Kg/h AFN 454 U-S Technical data: 1-stage dearomatization and concentration, combined operating mode SYSTEM TYPE: AFN 454 U-S PRODUCT: Apple juice, cloudy Input quantity 6 600kg/h Input dry matter 12,0% Input temperature 15 ·c Water evaporation 4 840 kg/h Initial quantity 1 760 kg/h Starting dry matter 45 % Starting temperature approx. 18 ·c Aroma  ...

1996 Theissen and Bonnitz TB 314 QSM 65 Collating machine Hersteller (Manufacturer): Theisen & Bonitz GmbH, Burscheid, Germany Masch.-Typ (Machine Type): TB 314 QSM 65 Baujahr (Year of Manufacture): 1998 U (Voltage): 3~PE 400 V, 50 Hz P (Power): 1.9 kW Find more here - / Contact us at -

Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...

Twin screw extruder APV Baker, int. ref. APV 5 (Baker Perkins) Ø50/25D + additional liner 10D(for 35D), this was totally revamped in 2017, liners and screws are in quite good conditions, reduction gear was replaced in 2021. Operator panel with recipes and 14 heating zones, all in good conditions. Find more here - / Contact us at -

Agilent Technologies Bravo G5522A NGS Workstation 1.1 NGS Benchtop Integrated WorkStation -Integration of plate management and liquid handling devices into a benchtop automation system. - VWorks Benchtop License: Included - VWorks Simulation License: Included Robot Disable Hub: included 1.2 Bravo Liquid Handler integrated to BenchCel with - 5 Standard Pads 2 CPAC Ultraflat heated/cooled Pad 1 Bravo Orbital Shaker - 1 Bravo Thermal Pad · Magnetic Bead Pad - PCR Plate Support 96 Well · CPAC PCR Plate Insert -Deck risers for Bravo -Thermocube Chiller 400W for Bravo Thermal Pad -Controller for CPAC Pad 1.3 Bravo Gripper Upgrade 1.4 96LT Disposable Tip Head 1.5 BenchCel 4Racks Microplate Handler - With 4 Front Loading Racks - BenchCel Risers 1.6 Labware MiniHub - Integrated with BenchCel Find more here - / Contact us at -

Coil line with 4 tonne coiler incl. coil turner HS Automation Conveyor system with 4 tonne decoiler incl. coil turner type MS41OL, year of manufacture 2015 Technical data decoiler: Max. Coil weight: 4000 kg Standard strip width: 500 mm Spreading range: 450 - 550 mm Outer ring diameter max: 1900 mm Spreading process Decoiler drive: hydraulic, three-phase motor 400V 50 Hz Decoiling speed: 30 m/min Tape loop control: Pull-off via preset pressure or via loop control Coil stop arms: 6 pieces with quick clamping system Protective device: andes Reel structure and function The reel consists of a solid structure of electro-welded and machined elements. The expanding mandrel can unwind to the left and to the right. Spreading is performed hydraulically via operating elements from the control panel. The reel is equipped with a three-phase motor with which the reel crown can be wound an ...

Mitutoyo QUICK VISION ACTIVE 202 Optical measuring machine (Vision Measuring Machine) from the manufacturer Mitutoyo Specifications (See pictures) High efficiency No constant supervision is required. The operator can carry out other tasks. Minimisation of error sources Automatic edge detection The automatic edge detection function enables high reproducibility of measurements, regardless of the reproducibility of measurements. Image autofocus The image autofocus function enables reliable height measurements at high speed. Continuous measurement of multiple workpieces Grinding function With this function, a large number of workpieces positioned on the large number of workpieces positioned on the device are on the device in a single operation. Automatic measurement can be started after be started after rough positioning Pattern search The pattern search function automat ...

LWA (Laurijsen WeegAutomaten) Atoma E233 Technical data Construction data: Machine type : Atoma E233 Weighing range : Weighing speed : up to 15 weighings per minute The following products can be processed on the automatic weighing machine: General dimensions: Overall dimensions W x D x H : 2,000 mm x 650 mm x 1,100 mm Total weight: approx. 500 kg Required power supply: Supply voltage : 230 V alternating current Control voltage : 24 V direct current Operating pressure : 4 to 6 bar Protection class : IP 65 Mains earthing : for example TN system Frequency : 50 Hz +/- 1 % continuous operation +/- 2 % short time Physical operating conditions: Ambient temperature, in operation : +10 to +40 degrees Celsius Relative humidity (RH) : 30% to 85%, non-condensing Lighting : normal ambient lighting. Altitude : up to a maximum of 1000 metres above sea level. Find more here - / C ...

Venus Bliss is a non‐invasive lipolysis machine. It employs 4 diode laser applicators to reduce fat via lipolysis, and an (MP)2 applicator that combines Multi-Polar Radio Frequency and Pulsed Electro Magnetic Fields with advanced VariPulse™ technology to reduce cellulite around the abdomen, buttocks, and thighs for a smoother, more contoured appearance and it boosts the lymphatic circulation. Find more here - / Contact us at -

AFS Corona Pre-Treatment system Type (Typ): G 60 M Input (Eingang): - Voltage (V): 400 - Current (A): 16 - Frequency (Hz): 50/60 Output (Ausgang): - Power (W): 6000 Technical Data Roller Width: 2700 mm Electrode Width: 2500 mm Maximum Mechanical Speed: 250 m/min Maximum Generator Power: 6 kW / 1 & 5 Core Operation Electrode Type: Ceramic Electrodes Discharge Roller: Ceramic Roller Drive Type: Driven Discharge Roller Cooling Type: Water-cooled Pre-treatment Direction: Controllable via web path Pressure Rollers: Present on both sides Find more here - / Contact us at -

Manufacturer : Alexanderwerk Model : WP150x120V Condition : Used The Alexanderwerk WP150x120V is a roller compactor used primarily for dry compaction and granulation processes, often in industries like pharmaceuticals and chemicals. Find more here - / Contact us at -

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

R02 spot welding cell A. ABB Robots - Type: IRB6640-180/2.55 - RobotWare Version: 5.14.2039.02 - External Axis ABB: No - Year of Fabrication: 2010 - Operation Hours: 68,685 hours (both robots) Equipped with standard industry communication protocols suitable for integration with existing automation systems B. Expert Tuenkers Turntable - Type: EXD960/0045/2 - Gearmotor Type: KHF87 DRS112 M8/4 BE5 HR/TF C. Albany Door Find more here - / Contact us at -

Manufacturer: ALPA Model : RT 2100 Type of machine : surface grinding machine Year of manufacture : 1997 - Max workpiece width: 600 mm - Max workpiece length: 2100 mm - Magnetic table: 2000 x 400 mm Equipped with: - Wheel dresser - Electronic control unit Mod. MT 2000/R - Electrospindle for conical grinding - Electronic plate from Tecnomagnete - Coolant tank Find more here - / Contact us at -

Aerosol Jet Printer Model - AJ300CE The Optomec AJ300CE Aerosol Jet Printer, introduced around 2011, is an additive manufacturing system designed for high-resolution, non-contact printing of electronic and biological materials onto various substrates, including non-planar surfaces. It utilizes Aerosol Jet technology to deposit fine-feature patterns with feature sizes as small as 10 micrometers. Key Features: - High Precision Printing: Capable of producing feature sizes down to 10 µm, enabling the creation of intricate patterns necessary for advanced electronic components. - Versatile Material Compatibility: Supports a wide range of materials, including conductive, resistive, and dielectric inks, with viscosities ranging from 1 to 1000 cP. - Non-Contact, Conformal Printing: The non-contact deposition process allows for printing on complex, three-dimensional surfaces without damagin ...

Manufacturer: Alfa Laval Model : DX 4555 Condition: used Year of Manufacture: 1996 Operating hours : 4,400 The machine is equipped with a high-quality screw coating made of tungsten carbide tiles. The on-site control panel and control cabinet belonging to the machine are still available and could be used further. A frequency converter matching the machine is also included. Shortly before it was taken out of service in 2014, the decanter was equipped with new tiles, so the level of wear should be relatively low Find more here - / Contact us at -

- Type: Aqua Mammut ( Parts Washing System ) - System Type: Front Loader --------------------------------------------------------------- Specifications: - Empty Weight: 1,700 kg - Load Capacity: 700 kg - Dimensions (Closed): 2,150 x 2,700 x 1,850 mm (H x W x D) - Dimensions (Open): 2,150 x 2,700 x 2,950 mm (H x W x D) - Basket Size: 1,000 x 1,500 mm - Usable Height: 350 mm - Maximum Filling Quantity: 175 l - Performance: 2 x 7.5 kW (3 x 400 V/50 Hz) - Maximum Operating Temperature: 75°C Find more here - / Contact us at -

Aircooled chiller/Heat pump SYSTEMAIR AQR290-H050.PROTO 46/54kW Cooling capacity: 46 kW / 13 tons (12/7 — 35°C) Heating capacity: 54kW / 15,3 tons (40/45 —7°C) Year of manufacture: 2023 Options; Heat pump Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Type of refrigerant: R290 Number of fans: 1 pcs. Dimensions: 2.25x1.1x1.75 m Weight: 507 kg Working hours: 0/0 h. Condition: outlet: new

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Railing Cone 90 ° Drawing available Rotary valve

60 cbm Aluminum Silo Manufacturer: Zeppelin Bulk density 0.6 Diameter 2.40 m Height without railing 15.50 m Cone 90 ° Ladder Railing Filter Rotary valve Drawing available

:::TECHNICAL SPECIFICATIONS::: Hydraulic machine: yes - X-axis travel: 750mm - Y-axis travel: 500mm - Spindle rpm: 1450 Other technical data: Table distance - spindle axis 620 mm Table dimensions: 700 x 500 mm - Machine equipment: magnetic table :::D DIMENSIONS AND WEIGHT::: Length: 2500mm Width: 2000mm Height: 2000mm Weight: 3800Kg