press for a used for sale

Machine Type: Force Gauge Manufacturer: Erichsen Type: 465-5KN Condition: used / good Offer will only be sent if a complete imprint is provided! Price 950 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623 DESCRIPTION We offer you a used force gauge from the manufacturer Erichsen, incl. undertable. Exclusive load cell. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Thermoforming Machine Brand: Kiefel, model: 76/225F. It shapes and cuts by vacuum pieces from rolls of PPE that are previously heated in the oven. Everything goes online, fully automatic and includes all empty aurxiliars, refrigeration, mold change trolleys, etc. Forming area: 760x2250 mm max, workpiece height: 220 mm pos. max, 30 mm neg. max, upper cutting force: 30 KN, lower cutting force: 30 KN, sheet line: 1575 mm, vacuum: 500 m 3/h, cycle time: ca. 20 sec (material dependence), glue type: butyl or hot melt glue, glue application speed: mx. 400 mm/sec (depending on the contour and type of glue), applicator head control: amount of glue depending on speed, tool change time: less 5 min, measures: 25500x6000x4600 mm.

We offer a refurbished Peri Maximo 270 wall formwork 218.42m² complete with accessories. Formwork cleaned, checked, sorted and corrosion sealed with zinc phosphate coating. Absolute top quality, ready for use for SB 3 without any problems. New value 161576€ Special net price 73255,00€ + VAT BOM can be customized if desired. Also available individually. 16 112006 Element MX 270 x 240 8 112022 element MX 270 x 120 8 112045 element MX 270 x 90 8 112200 Element MX 270 x 60 8 112078 element MX 270 x 45 8 112090 Element MX 270 x 30 8 112849 Multi-purpose element MXM 270 x 60 6 115255 Inside Corner MXI 270 x 50/20 6 112806 Outside corner MXA 270 x 45 2 114165 Wall Thickness Compensation WDA MX 270 x 4 2 114186 Wall Thickness Compensation WDA MX 270 x 5 2 114174 Wall Thickness Compensation WDA MX 270 x 6 2 114128 Wall Thickness Compensation WDA MX 270 x 10, Alu  ...

We offer a new, universal element slab formwork system EVODECK 300m², directly from the factory at great conditions, special net price € 87,368.00 Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 150 Element EVODECK 150x120 cm with PP formwork plate 10 element EVODECK 150x75 cm with PP formwork board 10 element EVODECK 120x75 cm with PP formwork board 90 Drop head EVODECK 135 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 9 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and di ...

Seewer Rondo SSO62 pastry brake Stainless frame, belt dimensions 3200mm x 640mm, top mounted flour duster, mobile, 3Ph

We offer a Doka Framax 270 wall formwork complete with accessories 270.81m² The formwork is in original Doka rental warehouse quality, partly newly covered with original Doka Xlife formwork. Controlled and sorted. Suitable for higher-value applications. Accessories original Doka rental warehouse quality. Exposed concrete class 2/3 possible without any problems. New value approx. 203397,00€ Special net price 75421,00€ 12 588109500 Framax Xlife element 2.70x2.70m 10 588103500 Framax Xlife element 2.40x2.70m 10 588100500 Framax Xlife element 1.35x2.70m 10 588102500 Framax Xlife element 0.90x2.70m 4 588122500 Framax Xlife-Uni-Element 0.90x2.70m 8 588104500 Framax Xlife element 0.60x2.70m 4 588105500 Framax Xlife element 0.55x2.70m 8 588106500 Framax Xlife element 0.45x2.70m 8 588108500 Framax Xlife element 0.30x2.70m 8 588130500 Framax Xlife inner corner 2.70m 8 ...

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

We offer a Dokadek slab formwork 272.62m² with accessories. The formwork is checked and sorted. All elements are covered with original Doka Xlife formwork. Exposed concrete class 2/3 possible without any problems. Suitable for higher-value applications. New value 120081,00€ - 70% discount = special net price 36150,00€ 77 x 586501000 Dokadek element 1.22 x 2.44m 22 x 586502000 Dokadek element 0.81 x 2.44m 0 x Dokadek compensator 2.44m 27mm / 21mm 0 x Dokadek compensator 1.22m 27mm / 21mm 0 x Dokadek compensator 0.81m 27mm / 21mm 120 x 586506000 Dokadek support head 6 x 586539000 Dokadek corner head 30 x 586536000 Dokadek Wall Head 10 x 183063000 Dokadek Wall Bracket 25 x 586518000 Dokadek suspension bracket H20 4 x 586540000 Dokadek Mounting Rod B 2 x 586541000 Dokadek stripping tool 0 x 582528000 Spring Bolt 16mm 3 x 583011000 Doka reusable container 1.20x0. ...

IMPACT ENERGY, KJ 50 NOMINAL WEIGHT OF FALLING PARTS, KG 2000 MAX NUMBER OF BLOWS PER MINUTE 56 WORKING ZONE DAYLIGHT, MM 530 DISTANCE BETWEEN COLUMNS, MM 2360 DIE IMPRESSION SIZE, MM 530 x 300 STEAM PRESSURE, MPA 0,7-0,9 HAMMER DIMENSIONS, MM 4900 x 1930 HAMMER HEIGHT ABOVE FLOOR LEVEL, MM5000 HAMMER WEIGHT WITH ANVIL BLOCK, KG 50100 ANVIL BLOCK WEIGHT, KG 30000

Weight of impact (Nominal weight of falling parts) kg 3150 Energy of impact kj 80 The greatest number of impacts it is brisk in a minute 56 Distance between racks in light mm 2800 Height working area mm 630 The sizes of a mirror it is brisk 600 x 340 Distance from a mirror bottom it is brisk up to a level of a floor mm 750 Pressure of air before an intake 6-8 Machine overall dimensions: mm ·length 5000 ·width 2500 ·height 4500 Weight of an anvil-block kg 41 250 Weight of a hammer with an anvil-block kg 70 700

Offer 04446 Specifications: - Total width approx. 950 mm - Working surface length / web length approx. 420 mm - Working surface depth / web depth approx. 150 mm - Compression foot approx. W 120 x D 125 x H 140 mm - Total depth approx. 280 mm - Round horn approx. 250 mm - Square horn approx. 260 mm - Round hole in the track approx. 22 mm - Through-square hole in the track approx. 25 mm - Anvil height approx. 345 mm - Weight approx. 190 kg - Base frame W 520 x D 520 x H 345 mm - Weight 30 kg

Product number: 2704EG Type: PFM-12 Serial number: 171 Capacity: 20 - 65 strokes/min. Forming width: 12", 30.54 cm Hopper: 500 Lbs. / 226 kg Belt width: 380 mm Compressed air: 7 Bar, 140 l/min. Power: 3 x 460V, 60Hz, 17kW Dimensions: 2950 x 1100 x 2050 mm Weight: 1950 kg With Tender-Form and paperfeed interleaver. Including various parts and moulds.

Gebr. Stair formwork / delta formwork ramp, make HOWAL, for straight stairs - mechanically adjustable, stairs can be made in installation position up to approx. 2.26 m wide and 18 gradients, max. platform length: 2.00 m

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic power unit)Year of construction 1991 Nominal load capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mm Stroke max. 930 mm Construction height - bottom 100 mm (with installation frame) Construction height - top 1030 mm Hydr. Operating pressure 350 bar = lifting capacity 1000 kg Hydraulic engine power 1.5 kW Mains connection 400 volts, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is actuated - without hydraulic power unit - without electrical control Length of mounting frame 2270 mm Width of installation frame 1580 mm Height of installation frame = height below 100 mm Dead weight Lifting table 500 kg good condition; used

Product number: 2714B Type: MLF400 Serial number: 2412 Year of construction: 2010 Belt width: 400 mm Capacity: max 55 strokes/min. Compressed air: 8 Bar Power: 3 x 400V, 50Hz, 8kW Dimensions: 3350 x 1100 x 2650 mm Weight: 1200 kg With bridge breaker

Product number: 2728 Type: MFD Model: 51670-C-0014 Serial number: 208280 Year of construction: 2010 Working width: 400 mm Lanes: 4 pieces Product size: max 55 mm Outfeed height: 1150 mm Power: 230VAC, 50Hz, 2kW Dimensions: 950 x 1200 x 1800 mm For forming filled products

Jungjohann Coating format saw blade 302 x 3,2 x 30mm Z=60 sharp

Gebr. Sectional formwork Fabr. Technoplan, L = 26.50 m, max. chamber dimension = 1.65 m x 1.80 m Steel formwork, incl. vibrating system (vibrator, converter) Formwork can be moved hydraulically

Self-loading truck-mounted forklift CDD05 - Electric for 500kg This self-loading electric truck-mounted forklift is suitable as a truck-mounted forklift for delivery vehicles or for trucks without a loading ramp. It automatically loads itself to the next higher level. Thanks to this special pallet truck, power and nerves can be spared during loading and unloading - especially if there is no lifting platform. This model can also be used for pure transport work up to 500 kg. It is used in logistics, goods handling and is also designed for tough everyday industrial use. Special pallet trucks for everyday industrial work Self-loading and electric Load capacity of 500 kg with a fork length of 1050mm Maximum lifting height of 1300 mm NEW - Pick-up in 74722 Book

Machine Pastry forming/speculoos machine Cleaned & functionally tested Properties: + different roller shapes possible + easy and simple operation + manual, analogue control + Machine equipped with new suction belt and new bearings STANDARD equipment: + incl. 1 reel (3 different motifs to choose from) SPECIAL EQUIPMENT: - 4 more reels available (3 different motifs) - Surcharge for each additional roller: 350,-- € net - Flat rate for all 5 reels: €1,200,-- net - Surcharge for new painting of the machine: 850,-- € net Specifications: - Year of construction: 1979 - Dimensions: 48 x 137 x 133 cm (W x D x H) - roller width: approx. 23.5 cm - Roll diameter: approx. 12.5 cm - Figure height: approx. 4.5 cm to 8 cm - Figure width: approx. 3.5 cm to 4 cm - Figure thickness (/ thickness): approx. 3 mm to 5 mm - Net weight: approx. 150 kg - Power: 380 V - 3Ph - 5 ...

Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 48 volts -Power: 8 kW -Speed: 2400 rpm -Output shaft: Ø 30 mm -Drive motor for lifting work platforms from GSL (German Standard Lift) -Number: 1x motors available -Price: per piece -Dimensions: 405/195 mm -Weight: 35 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Gear pump for electric forklifts -Gear pump type: MLPS/BC/114/F -Drive motor for lifting work platforms from GSL (German Standard Lift) -Number: 5x motors available -Price: per piece -Drive: 12 V -Dimensions: 320/150 mm -Weight: 12 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -Voltage: 24 volts -Power: 25 A -Connection: 230 volts -Weight: 30 kg

Force Roller, Tension, Force Transducer FMS Series RMGZ 100 B Type RMGZ 115 B Measuring range: 50 N used, tested ! Dimensions: 190 x 90 x 70 mm Dimensions (packaging): 150 x 120 x 90 mm

Fork Sensor DL, DATALOGIC SRO-12 Ident- No. 98F89152 Fork opening: 17 x 5 mm 24 V DC approx. 2.0 m connection cable New ! Dimensions (sensor, without cable): 45 x 14 x 25 mm

Three-phase meter AEG form C11H 3x 220 / 380 V 10 (30) A 50 Hz 1 kWh = 187.5 armature revolutions used, tested ! Dimensions: 290 x 185 x 135 mm

Forward and reverse counter HEIDENHAIN 30 0.154 11 359 115 / 220 - 240 V 1AC 56 - 60 Hz approx. 2.5 m connection cable used, tested ! Dimensions: 270 x 160 x 225 mm

Three-phase meter LANDIS & GYR form ML262 3x 230 / 400 V 10 (60) A 50 Hz 1 kWh = 187.5 armature revolutions cable cover defective used, checked ! Dimensions: 320 x 180 x 135 mm

mechanical force transducer, force measuring bracket FORCE GAUGES HALLE 0 - 10 kN 1 t in wooden box Dimensions: 250 x 150 x 85 mm

mechanical force transducer, force measuring bracket FORCE GAUGES HALLE 0 - 2000 N 200 kg in wooden box Dimensions: 250 x 150 x 85 mm

Servo motor, permanent magnet motor, with forced fan SIEMENS 1PH 5167-4CF40-Z ( 1PH5167-4CF40-Z ) 34 kW 1500 rpm three-phase motor IP54 shaft diameter: Ø 55 mm shaft length: 110 mm flange: Ø 180 / 190 x 190 mm motor foot: 650 x 295 mm hole spacing (parallel to the shaft): 555 mm hole spacing ( transverse to shaft ): 255 mm hole diameter: Ø 13.5 mm external fan: SIEMENS 2CW8187-8 220 / 380 V 3AC 0.9 / 0.52 A 50 Hz used, repaired ! Dimensions (servo motor): 1045 x 315 x 385 mm

three-phase electric motorwith forced fan VEM K21F 160M 2 TWS HW ( K21F160M2TWSHW ) 11 kW 2890 - 2910 rpm 38388 0 - 420 / 660 - 725 V IP 55 shaft diameter: Ø 38 mm Flange diameter: Ø 300 mm used, tested ! Dimensions: 680 x 300 x 380 mm

Three-phase electric motor, with forced fan SIEMENS 1LA71334AA11-Z 7,5 kW 1455 rpm 230 / 400 V IP 55 Shaft diameter: Ø 38 mm Shaft length: 80 mm Groove width: 10 mm Flange diameter: Ø 230 / 300 mm bolt circle diameter: Ø 265 mm hole diameter: Ø 14.5 mm external fan: A2E250 0,125 kW 2600 rpm 230 V 1AC 50 Hz used, tested ! Dimensions: 610 x 300 x 340 mm

Servo motor with forced fan, permanent magnet motor SIEMENS 1FT6086 - 8SH72 - 1AG1 ( 1FT60868SH721AG1 ) 4500 rpm IP54 / 65 < br />261 V Shaft: Ø 32 mm Flange: 155 x 155 mm Forced fan: 2CW1332 230 V 1AC, 0.28 / 0.24 A 50 / 60 Hz spare part for machining center HECKERT CWK400D ! used, tested ! Dimensions: 520 x 185 x 240 mm

Servo motor with forced fan, permanent magnet motor SIEMENS 1FT6086 - 8SH71 - 1AG1 ( 1FT60868SH711AG1 ) 4500 rpm IP54 / 65 < br />261 V Shaft: Ø 32 mm Flange: 155 x 155 mm Forced fan: 2CW1332 230 V 1AC, 0.28 / 0.24 A 50 / 60 Hz spare part for machining center HECKERT CWK400D ! used. Tested ! Dimensions: 510 x 185 x 250 mm

Geared motor with forced fan SEW R87 DRS90M4/V ( R87DRS90M4/V ) 1.5 kW 13 rpm 230 / 400 V IP55 Forced fan: 97 W New ! shaft diameter: Ø 50 mm Dimensions: 750 x 350 x 290 mm

Geared motor with forced fan SIEMENS FDU1109/2075132001 2KJ1202-1CE13-1FJ1-Z DF28-LA71M4F 0,37 kW 19.1 rpm 230 / 400 V IP55 shaft diameter: 25 mm New ! Dimensions: 580 x 230 x 180 mm

Shaft forks 1 pair PAGUS 1300 x 800 x 100 mm fork width: 120 mm fork height: 40 mm shaft Ø: 50 mm used,, tested ! Dimensions: 1300 x 800 x 300 mm

Fork bearing block for hydraulic cylinder, 2 pieces PAGUS LD16N DIN 24556 with bolt BA-19 and locking plate A-16 diameter: Ø 16 mm, length: 50 mm base plate: 96 x 83 mm hole spacing: 70 / 55 mm 4x bore: Ø 11 mm New ! dimensions ( single bearing block ): 96 x 92 x 66 mm

Drawing cabinet, architect's cabinet, plan cabinet, 2-part PAGUS format DIN A0 width: 1320 mm depth: 950 mm height: 800 mm ( 2x 400 mm ) Material: sheet steel 8 drawers: width: 1260 mm, depth: 900 mm, height: 55 mm used, tested ! Dimensions: 1320 x 980 x 800 mm

Tightening bolt, sealed, 10 pieces PAGUS form B 40 with bore: Ø 7 mm thread M 16 x 2.0 suitable for steep taper SK 40 used, tested ! 10 pieces ! Dimensions(Packed): 110 x 110 x 20 mm

Tightening bolt, 10 pieces PAGUS form B 40 with bore: Ø 7 mm thread M 16 x 2.0 suitable for steep taper SK 40 used, tested ! 10 pieces ! Dimensions(Packed): 110 x 110 x 20 mm

Fork clamping iron with round clamping attachment, 4 pieces WMW C18 TGL35912 Total length: 200 mm Clamping attachment: Ø 24 mm, length: 35 mm for clamping screw M16 New ! Dimensions ( fork clamping iron ): 200 x 50 x 32 mm Dimensions ( packaging ): 200 x 100 x 65 mm

Transnorm Rising falling Incline belt conveyor GF 9820-700-600 RA2087 Technical data: Conveyor length (NL): 9820 mm (6000 mm riser segment + 3820 mm forerun) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9820 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eu ...

Position feet, 20 pieces PAGUS form A M8 pitch: 1.25 thread length: 10 mm foot area: Ø 15 mm height: 10 mm width across flats: 17 mm Other quantities on request ! New ! Dimensions ( single position foot ): 20 x 17 x 20 mm Dimensions ( packaging ): 140 x 100 x 20 mm

Max. sheet thickness: 1.5 mm steel 2 continuous stations (see video) Weight: approx. 500 kg

Max. sheet thickness: 1.5 mm steel 2 continuous stations (see video) Weight: approx. 500 kg

Used minced meat production and packaging line. New 2010. 1.Minced meat production and portioning line - specification Assumptions: -Product: pork minced meat -Product: pork minced meat -Product capacity: approx. 800 - 900 kg / h -Packaging line capacity: up to 55 - 60 portions (500 grams) /minute -Packaging machine capacity: up to 40 trays/minute -Portion size: 500 g -Packaging format: TRAY SEALER / MAP packaging/. -Packaging: PP: 205 x 160 x 50 mm -Packaging: automatic -Product temperature: - 1 /+ 1 °C -Declared portioning accuracy: +/- 1.5% (depending on the product) -Vacuum Tumbler REX RVF 736 -Machine suitable for stuffing, mincing and portioning -Construction in stainless steel -Operation via 12" touchscreen -Memory: 100 operating programmes Stuffing capacity: up to 3600 kg / h -Productivity for filling: up to 3600 kg / h -Productivity for minced meat portionin ...

HSS hand reamer, hand reamer, right-hand reamer PAGUS DIN 206 nominal diameter: Ø 34 mm form A ( straight grooves ) number of grooves: 12 cutting edge length: 155 mm cylinder shank: Ø 34 mm square: 26 x 26 mm, length: 28 mm Total length: 310 mm New, preserved ! Dimensions ( packaging ): 350 x 47 x 47 mm

Forward countersink, carrier tool, special milling cutter, milling cutter JONGEN WERKZEUGTECHNIK VS90-M24-84 diameter: 23,8 mm Number of cutting edges: 3 Diameter shaft : 40 mm Usable depth: 53 mm Total length: 110 mm Plate seat: B10 New ! dimensions ( cutter ): Ø 40 x 110 mm dimensions ( transport box ): 120 x 51 x 47 mm