press filter used for sale

MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified

With foot switch, on metal base, self-made.

with battery and charger leaking oil

Working capacity 103 mkg at speed 180 1/min, max. stroke 60 mm, stroke adjustment 6-60 mm

Length approx. 1800 mm; WILA NS Recording

HOT PRESS model OMC PL 90 , with diathermic oil heating second hand machine machine worked very very little excellent working conditions , like new CE compliant machine diathermic oil heating via built-in electric boiler heating power KW 9 / 18 for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.85 max. thrust Ton.90 opening mm.400 hydraulic pump motor power Hp 3 n.4 racks for table lifting guide max. thrust 2.5 kg/cm2 total installed power 21 kW volt. 380/50 net weight kgs. 4500

Double pressing/folding/product pressing single or shingle flow Condition: overhauled, serviced, fully functional, ready for use Min. format: spine 180 x width 140 mm, number of pages (45g/m2) tabloid 8, two-fold/broadsheet 4 Format max. spine 450 x width 340 mm, number of pages (45g/m2) tabloid 128, two-fold/broadsheet 64 Mechanical speed max.: 10000 revs/h

Compressive force: 28 kN Stroke: 12 mm Safety distance: 100 mm Run-time travel: 0.06 s Table dimensions: approx. 200 x 160 mm with pneumatic punching tool mounted

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.

Rebuilt in 1992 by Beck & Röhm, Printing capacity: 630t, Clamping surface: 1730x2500 mm, Number of grooves. 8, Plunger stroke: 900 mm , Installation height: 1550 mm, Power requirement: 2 x 7.5 kW, The dismantling and loading costs are optional. If the dismantling is carried out on your own, the corresponding costs will of course be reimbursed.

Including various tools;

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.

Equipped with 10 crimp sets; unused

with feed device Nominal force: 1000 kN Pneumatic pressure: 5 bar Permissible delay time: 210 ms Safety distance Tool operation: 336 mm Continuous stroke (interchangeable pulley): 50/80 rpm Single stroke: 45 rpm Working capacity in continuous stroke: 3500/5000 Nm Torque: 25,000 Nm Drive power: 11.5 kW with control panel and digital display CPS 20 with support frame

• Tablet diam./diagonal max. 60 mm with single mould • Output max. 1,800 tablets/h with single tool • Infinitely variable speed • Filling height max. 40 mm • Pressing pressure max. 80 KN • Without filling shoe, die table, discharge chute and tableting tools (complete replacement approx. € 12,000) • Contactor control, electrics new in 2009 • Sold as a spare parts repository in present condition

Foot control / strip bender / opening 159x77cm

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...

Machine number: 23620678 max. compressive force: 250 kN Largest stroke: 150 mm Drive power: 7.5 kW Operating voltage: 380 V Table dimensions: 570 x 380 mm

Machine number: 2-0538 Compressive force: 28 kN Stroke: 12 Table dimensions: approx. 200 x 160 mm incl. installed punching tool

Equipped with 1 set of tools, please note the control is defective

equipped with beading rod, manually operated

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.

Used High Quality Bystronic pressbrake 6-axis for a sale.

Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg

equipped with Delem CNC control and Wila hydraulic top clamping; Exclusive tools

V6 30 degree T mold set; length approx. 3.1 meters

Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!

Machine number: 6750296 max. load: 450 kN Throat: 230 mm Plunger strokes: 80 1/min Plunger adjustable: 55 mm Stroke adjustable: 4 - 80 mm Motor power: 4 kW Voltage: 380 V Table dimensions: 700 x 520 mm

26 Mint Unused Hydraulic Cylinder Single Wheel with Tension Spring Manufacturer: Matra Frankfurt Article number 4641.00000.5700166Z Overall length retracted 345 mm Overall length extended 470 mm Stroke 150 mm Piston rod 63 mm Piston 80 mm Drauck 350 bar Input errors, errors and prior sale reserved.

General overhauled, new seals etc.

Equipped with 10 crimp sets; unused

Dough dividing and rounding machine Roll Press Record Semi-automatic 36-piece Parting head NEWLY revised Stainless Steel Knife NEW Dough insert up to 2100g, pieces from 20 to 70 g Output approx. 3600 pieces/hour with 3 new knitting plates E-system new DGUV V3 tested Connection 400V, 1 kW, 16A-CEE plug Dimensions: 520 x 500 x 1200 mm, WxDxH Used machine overhauled with 6 months warranty + spare parts service Option: Cast Plate Stainless steel platform Maintenance contract Service Package E-Box Many more TOP dough dividers in stock!

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Includes various tools

Capacity: 3.100 Ltr. Operating pressure: 4.5 bar, with test book Year of Make: 1976 Manuf.: Wabag Material: Stainless Steel, 1.4571, V4A Design: Cylindrical sthd, on 3 feet, spout with ball valve DN 25, lateral weld-on nozzle DN 65, various connections inch threads, manhole cover, slight adhesions inside and outside last use: water Height approx. 3,300 mm (with cleaning line) Diameter: approx. 1,150 mm

Hand sheet metal shears, Dimension: 1000x260x1800mm; Mandrel press, Dimensions: 600x400x1500mm ; see photos for more details

consisting of stamps in different designs and sizes

Dimension of press: 1400x1400x1600mm, Workshop screw press, incl. assortment of tools; for more details see photos of Regal

Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 1400 x 2500 mm Max distance between table and slide in its lower position at the upper position of adjustment: 750 mm Size of distance adjustment between table and slide: 250 mm Press dimensions (Length x Width x Height): 4130 x 2945 x 7200 mm Press weight: 69000 kg