press eccentric used for sale

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland in 2004. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adj ...

Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober

ZTS KOSICE LE 160 C eccentric press was built in 1988 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is in very good technical condition and has been regularly maintained throughout its service life. All control solenoid valves were replaced in February 2023. ZTS KOSICE LE 160C is an excellent choice for a wide range of workpiece machining, i.e. punching, cutting and stamping. All of these machining processes are performed with a high press force of 160 tonnes, which, combined with a rigid design, enables the production of parts with high repeatability and excellent precision. The ZTS LE 160 C eccentric press weighs 10150 kg. Technical specifications of the ZTS KOSICE LE 160 C press - maximum press force: 160 t (1600 kN) - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 30/min - maximum slider stroke: 120 mm -  ...

Specifications: - Compressive force 60 t - Projection 350 mm - Table size approx. 900 x 600 mm - Table height adjustable - Diarrhea hole in the table approx. 300 x 200 mm - maximum installation height approx. 360 mm - Stösselfläche approx. 340 x 160 mm - Cone hole in the plug 40 mm - Plug adjustability 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - 2 hand operation - Pneumatic connection 6 bar - Flywheel drive / speed infinitely adjustable - Rotary wedge coupling - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 4500 kg - mechanical clamp feed MABU type ZPL 11 with 3 roller straightener

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!

Nominal pressing force 4,000 kN Plunger stroke, adjustable in steps 30160 mm Plunger adjustment 180 mm Projection 515 mm Idle stroke rate 45 / min Option: infinitely variable 10 ... 60 / min Tool installation height at maximum stroke bottom and top adjustment 660 mm Table clamping area (WxD) 1,700 x 1,000 mm Table height above floor 1,005 mm Plunger clamping surface (WxD) 1,100 x 800 mm Pin hole in plunger 65 mm Main motor power 45 kW Height of the machine approx. 4,325 mm Weight of the machine 33,000 kg Control system - press safety control with redundant design and self-diagnosis as well as a status and error display in plain text Stepless stroke rate control in the range of 1060 strokes/min via ABB frequency converter Control variant -touchscreen TFT color incl. electronic cam switchgear with tool control and tool safety,  ...

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg

A Schuler C-frame eccentric press is offered. Press force: 80t, throat depth: 280mm, adjustable stroke range: 20mm-160mm, max. stroke rate: 125strokes/min, table area X/Y: 700mm/560mm, slide area X/Y: 560mm/350mm, slide adjustment: 72mm, max. distance between table and slide: 510mm. Machine weight: approx. 4800kg. Inspection possible by appointment.

Offered for sale is a Schuler C-frame eccentric press. Press force: 40t, throat depth: 220mm, stroke range: 8mm-88mm, max. stroke rate: 160strokes/min, table area X/Y: approx. 630mm/430mm. Machine weight: approx. 2300kg. Inspection by prior arrangement is possible.

Offered is a single-column eccentric press, manufacturer Schuler. Press force: 63t, throat depth: 250mm, max. stroke: 8mm-100mm, max. stroke rate: 160strokes/min, bed area X/Y: 710mm/500mm, slide area X/Y: 450mm/280mm, slide adjustment: 63mm, max. distance between bed and slide: 415mm, including a safety screen at the working area. Machine weight: approx. 3900kg. Inspection possible by arrangement.

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A single-column eccentric press is offered. Press force: 25t, throat depth: 200mm, adjustable stroke range: 8mm-80mm, maximum stroke rate: 180strokes/min, table area X/Y: 560mm/400mm, ram area X/Y: 355mm/220mm, ram adjustment: 50mm, maximum shut height: 320mm. Machine weight: approx. 2150kg. Inspection by appointment is possible.

Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Weingarten Eccentric Press AV10 - With pliers feed - Reel and reel - When pressing, the speed can be set up with a frequency converter - Press force: 10 t - Stroke rate: 160 / min - Plunger stroke: 6-60 mm - Plunger adjustment: 40 mm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 595 x 410 mm ram adjustment: 70 mm no. of strokes: 150 Hub/min table adjustable in height: 240 mm total power requirement: 1,1 kW weight of the machine ca.: 1,45 t dimensions of machine L x W x H: 1,30 x 0,80 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two eccentric presses are offered. 1) ETH 3 eccentric press, pressing capacity: 30000kg, cutting area for material with 45kg strength: 665mm², ball screw adjustment: 40mm. Including protective cover and separate control cabinet. 2) An eccentric press with C-frame design, design: C-frame with flywheel, die clamping: hydraulic clamping device on the table. Including safety enclosure. An on-site inspection is possible.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 75 t

Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm

pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm

Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

Dirinler CD/PC 600 H - Eccentric Press - incl. tools & accessories - Built in 1990 Specification - Capacity: 60 t - Stroke rate: 52 rpm - Plunger adjustment: 80 mm - Table dimensions: 750 x 480 mm - Plunger area: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Engine speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Dimensions control cabinet WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg

Nominal pressing force... 160t Table dimensions ... 1000 x 740mm Max. ram stroke... 25-160mm Plunger Dimensions ... 710 x 425mm Plunger adjustment ... 100mm Installation height ... 455mm Main engine power ... 11kW L x W x H ... 1380 x 1950 x 3350mm Machine weight ... 12180kg The machine is in good condition, possible to test under electricity.

Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg

Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram adjustment: 85 kW table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: Ø280 mm table height: 830 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 t throat: 280 mm stroke: 10-90 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 750x540 mm ram surface: 600x200 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø35 mm weight of the machine ca.: 3,7 t dimensions of the machine ca.: 1800x1800x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm

pressure: 100 t throat: 315 mm stroke: 8 - 112 mm table surface area: 725 x 570 mm ram surface: 410 x 315 mm ram adjustment: 80 mm no. of strokes: 55 / 82 Hub/min tool shank hole (depth x diameter): 85 x 50 mm dayligth: 355 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of machine L x W x H: 2,00 x 1,00 x 2,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7936 Type: T450 RCE Producer: Sangiacomo Created: 2018 Parameters: Compressive force: 450 t Table length: 1800 mm Table width: 1000 mm Stroke length: 20-250 mm Total power requirement: 37 kW Adjusting the ram: 120 mm Maximum stroke rate: 50 1/min Ram dimensions: 1400 x 900 mm Machine height: 4960 mm Machine width: 2880 mm Machine weight: 50000 kg

Eccentric press with black shield, Pressure capacity 15 t, Stroke adjustment from 5 - 60 mm, Table dimensions: 550 x 360 Dimensions: W 800 x D 1200 x H 2200 mm Weight 800 kg,

Single column - eccentric press WEINGARTEN type E 40 Masch. No. 643 / 62 Year of construction 1963 Pressure capacity 40 ton. Projection 250 mm Table opening 150 x 80 and Ø 200 mm Table area 560 x 460 mm Plunger area 250 x 200 mm Adjustable ram stroke 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100 / 130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 volts, 50 Hz Table height above floor 840 mm - Clutch-brake combination thanks to WEINGARTEN friction threaded clutch with OT flow protection - Electric stroke release via two-hand operation - Overload protection by crushing plate - Manual grease central lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirements L x W x H 1800 x 1500 x 2200 mm Weight 3.1 ton.

pressure: 50 t throat: 230 mm stroke: 12-110 mm no. of strokes: 40-100 Hub/min ram - range of adjustment: 70 mm table surface area: 740x440 mm table height: 840 mm hole in the table: Ø 140 mm ram surface: 460x300 mm tool hole in ram: Ø 45 mm total power requirement: 4 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: BxTxH 1500x2500x2510 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t throat: 180 mm stroke: 8-76 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 60 mm table surface area: 360x580 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: BxTxH 1350x1200x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 300 mm stroke: 8-140 mm no. of strokes: 70 Hub/min ram - range of adjustment: 100 mm table surface area: 750x620 mm ram surface: 500x340 mm hole in the table: Ø 180 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 2100x1500x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 325 mm stroke: 10-110 mm no. of strokes: 100 Hub/min ram - range of adjustment: 80 mm table surface area: 900x630 mm ram surface: 500x315 mm hole in the table: 325x225 mm table height: 800 mm tool hole in ram: Ø 50 mm dimensions: BxTxH mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t throat: 400 mm stroke: 6-125 mm ram - range of adjustment: 100 mm dayligth: 400 mm table surface area: 1100x750 mm no. of strokes: 60 Hub/min ram surface: 800x550 mm hole in the table: Ø 150 mm total power requirement: 14 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.