press eccentric used for sale

Uğursan U.P.H.K.P. 010 Four-Column Hydraulic Rubber Press Four-column hydraulic press for rubber processing and controlled compression operations. Manufacturer: Uğursan Model: U.P.H.K.P. 010 Year: 2018 Serial number: U.P.H.K.P. 0985 Rated capacity: 10 t Power: 4 kW Electrical supply: 380 V Configuration: Upper hydraulic ram, guided moving platen, T-slotted lower working table, hydraulic power pack with reservoir, valves and pressure gauges, safety guarding, HMI/operator controls and stack light Control system: Vatan Otomasyon / VEEOS Hydraulic oil: Shell Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,100 × 2,200 mm Weight: 1,640 kg All descriptions are indicative only. Auction-ID: A1-50546-12

Analogue tachograph, Scania 6 cylinder for high-pressure installation, Woma pump unit.max mass 26000kg Auction-ID: A1-50447-16

Hammelmann Hochdruckpumpenanlage HDP 202 / S 1100-20, Baujahr 2019, mit nur ca. 300 Betriebsstunden. Die Anlage befindet sich in einem sehr guten Zustand, ist voll funktionsfähig und sofort verfügbar. Technische Daten: - Hersteller: Hammelmann - Typ: HDP 202 / S 1100-20 - Baujahr: 2019 - Maschinen-Nr.: B9.02202.0267 - Betriebsstunden: ca. 300 h - Max. Betriebsdruck: 3.000 bar - Förderleistung bei 3.000 bar: 28 l/min - Alternativer Betriebspunkt: 1.000 bar / 110 l/min - Antrieb: Volvo TAD 873 VE Dieselmotor - Motorleistung: 235 kW - Abgasstufe: Stage IV / Tier 4 Final - Motordrehzahl: 2.200 U/min - Pumpendrehzahl: 2.150 U/min - Max. Flüssigkeitstemperatur: 40 °C - Sauganschluss: DN100 - Ausführung im 10-Fuß-Container Die Anlage kann mit zwei unterschiedlichen Betriebspunkten betrieben werden: 1.000 bar / 110 l/min oder 3.000 bar / 28 l/min. Original Hammelmann M ...

Uğursan U.P.H.K.P. 030 Four-Column Hydraulic Rubber Press Four-column hydraulic rubber press for controlled compression and forming operations. Manufacturer: Uğursan Model: U.P.H.K.P. 030 Year: 2020 Serial number: U.P.H.K.P. 1010 Capacity: 30 t Power: 7.5 kW Electrical supply: 380 V, three-phase, 50 Hz Rated current: 110 A Maximum main fuse: 125 A Configuration: Hydraulic power unit, heated upper and lower platens, HMI operator control, safety guarding and hydraulic oil system Control system: Gani Otomasyon, project no. 14276033 Hydraulic oil: Tellus S2 MX 46 Condition: Used Operational status: Untested Approximate dimensions: 1,700 × 1,500 × 2,700 mm Approximate weight: 3,000 kg All descriptions are indicative only. Auction-ID: A1-50546-14

Vatan Otomasyon U.P.H.K.P. 010 Four-Column Hydraulic Press Industrial four-column hydraulic press for controlled compression and forming operations. Manufacturer: Vatan Otomasyon / VEEOS Model: U.P.H.K.P. 010 Press capacity: 10 t Electrical supply: 380 V Configuration: Upper moving platen, lower tool table, hydraulic power unit, pressure gauges, safety guarding, HMI/operator control panel and stack signal light Approximate tool/table width: 600 mm Condition: Used Operational status: Untested Approximate dimensions: 1,400 × 1,100 × 2,200 mm Approximate weight: 1,500 kg All descriptions are indicative only. Auction-ID: A1-50546-10

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2017 Serial number: 1711-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic distribution system, pressure/temperature monitoring, heating system, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 5,520 kg All descriptions are indicative only. Auction-ID: A1-50546-20

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar workpieces. Manufacturer: AS Metal Model: Transform Year: 2022 Serial number: 2207-010 Power: 39 kW Electrical supply: 380 V, three-phase, 50 Hz Configuration: Sliding worktable, vacuum/pressure system, upper pressure vessel, safety guarding and separate operator control console Working table: Approx. 2,500 × 1,600 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,350 kg All descriptions are indicative only. Auction-ID: A1-50546-17

Double screen belt press (DSP 23/53), Fabr. Andritz, type 200/LM-LCP-K6-S7/08986/1, built in 1989, f. thin material, screen width 2,100 mm, control room, w. video surveillance system, Comment: Real estate installation Auction-ID: A1-50608-158

Double screen belt press DSE 23/51, manufacturer Andritz, type 200/RM-LCP-107-67/08968/1, year of construction 1989, for thin material, screen width 2,100 mm Auction-ID: A1-50608-156

AS Metal Transform Vacuum Membrane Press Industrial membrane press for vacuum forming and laminating foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-019 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, pressure vessel, pneumatic/vacuum system, heated upper pressing section, operator control panel, emergency stops and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-29

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002M Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Hydraulic pressure: Up to 500 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic valve system, heated upper press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,920 kg All descriptions are indicative only. Auction-ID: A1-50546-23

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2104-014 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic control system, vacuum system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,385 kg All descriptions are indicative only. Auction-ID: A1-50546-26

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-016 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-24

ESER E 925 Veneer Cutting Press Heavy-duty swing-arm cutting press for die-cutting veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Year: 2017 Serial number: KKP 03 Power: 1.5 kW Electrical supply: 220–380 V Configuration: Manually adjustable upper cutting head, cutting table and separate electrical control cabinet Control cabinet: Marian Galád, type KKP 01, 2018, 400/230 V, 16 A, 50 Hz, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-32

- Capacity 6t. - A control panel screen is missing. - This equipment was part of the production line associated with the DISA DISAMATIC D3-Z-555 DMS molding machine, available separately under batch number A7-50548-2. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-4

TOX Pressotechnik X-K050.3030.400.23 – Industrial Hydropneumatic Cylinder TOX Pressotechnik X-K050.3030.400.23 hydropneumatic cylinder, designed to generate precise and controlled movements in industrial pressing, assembly or automation applications. Its rugged design allows for use in industrial environments and for operations requiring precision and controlled power. Features: Brand: TOX Pressotechnik Model: X-K050.3030.400.23 Type: Industrial Hydropneumatic Cylinder Applications: Pressing, assembly and automation Dimensions (L x W x H): 185 x 60 x 36 cm Weight: 556 kg Use: industrial and professional Equipment sold as is. Auction-ID: A1-50714-4059

Binks 83Z-211-CE Pressure Feed Paint Tank & Spray System Pneumatic pressure-fed coating system comprising a Binks pressure tank, regulators, pressure gauge, hoses, DeVilbiss spray gun and auxiliary spray cup. Manufacturer: Binks / Carlisle Fluid Technologies Model: 83Z-211-CE Power: Pneumatic Tank capacity: 9.5 L Maximum operating pressure: 5.5 bar Safety valve: 5.5 bar Fluid group: 1 Operating temperature: 0–50 °C Hazardous-area classification: Suitable for Zone 1; Ex II 2 G X Included equipment: Pressure tank, regulators, gauge, hoses, DeVilbiss spray gun and auxiliary spray cup Condition: Used Approximate dimensions: 450 × 450 × 700 mm Approximate weight: 25 kg All descriptions are indicative only. Auction-ID: A1-50546-66

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane and foil onto panels and furniture components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1807-017 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum pump/system, pressure vessel, pneumatic controls, heated press section, operator control panel and safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-25

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating decorative films and similar materials onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1808-018 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Industrial sliding worktable, hydraulic/vacuum system, pressure vessel, heated upper pressing section, operator control panel with HMI, emergency stops and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,375 kg All descriptions are indicative only. Auction-ID: A1-50546-30

Uğursan HKP 200 Hydraulic Heated Rubber Press Hydraulic rubber press for heated compression moulding and pressing of rubber products, with large heated upper and lower platens, hydraulic power unit, touchscreen operator control and safety light barriers. Manufacturer: Uğursan Model: HKP 200 Year: 2022 Serial number: UP.HKP.3028 Pressing force: 200 t Operating pressure: 210 bar Total power: 51 kW Motor power: 15 kW Resistance heating: 36 kW Electrical supply: 380 V Configuration: Four-column construction, heated upper and lower platens, hydraulic power unit, touchscreen control, automatic heating controls and safety light barriers Condition: Used Approximate dimensions: 2,300 × 1,800 × 3,900 mm Approximate weight: 13,600 kg All descriptions are indicative only. Auction-ID: A1-50546-50

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2101-01 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding worktable, hydraulic power unit, pneumatic/vacuum controls, pressure vessel, heated upper pressing section, operator control panel and safety guarding Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-28

Technical data Manufacturer: INGERSOLL-RAND Type: C80MX2-2RH Year of Make: 1996 Serial No.: V-4716 Power: 350 kW Speed: 2,975 rpm Pressure: 800 kPa Control: Atlas Copco, Elektronikon Cubicle: Atlas Copco, Type 1900 0619 80, Serial No. AIF 108951 Installation: 2006 Configuration Version: Turbo compressor / control air compressor with separate control cabinet and connected piping technology. Auction-ID: A1-50608-40

Double screen belt press (DSP 23/52), Fabr. Andritz, type 200/LM-LCP-K6-S7/08986/1, built in 1989, for thin material, screen width 2,100 mm, control room, with video surveillance system, Comment: Real estate installation Auction-ID: A1-50608-157

Vacuum Membrane Press AS Metal Transform Manufacturer: AS Metal Ağaç Makinaları San. Tic. Ltd. Şti. Model: Transform Machine code: MBPR06 Year: 2018 Serial number: 1801-002 Industrial vacuum membrane press for forming and laminating workpieces. Heavy-duty machine with enclosed pressing chamber, pressure/vacuum vessel, sliding loading table, safety guarding and separate operator control panel. The sliding worktable/platen is approximately 2,500 mm long. Power: 45 kW Electrical supply: 380 V, 3-phase, 50 Hz Required compressed air pressure: 6–7 bar Hydraulic system: Oil-operated Hot-oil system: Transfer oil Approx. dimensions (L × W × H): 4,500 × 3,000 × 2,800 mm Weight: 6,370 kg Condition: Used. All descriptions, technical specifications, dimensions and other information are indicative only. Auction-ID: A1-50546-21

ESER E 925 Veneer Cutting Press Used swing-arm veneer cutting and punching press for processing veneer and similar sheet materials. Manufacturer: ESER Makina Sanayii Model: E 925 Configuration: Swing-arm cutting head, cutting table and separate electrical control cabinet Electrical cabinet: Marian Galád, type KKP 02, production no. 2062018, 2018 Electrical specifications: 400/230 V, three-phase, 50 Hz, 16 A, IP55/20, 24 V DC-PELV control circuit Condition: Used Approximate dimensions: 1,400 × 1,100 × 1,700 mm Approximate weight: 825 kg All descriptions are indicative only. Auction-ID: A1-50546-33

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for thermoforming and laminating membrane or foil onto furniture and panel components. Manufacturer: AS Metal Model: Transform Year: 2021 Serial number: 2102-004 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated pressure/vacuum vessel, pneumatic controls, vacuum system, heated pressing section, operator control panel and perimeter safety guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,380 kg All descriptions are indicative only. Auction-ID: A1-50546-27

Uğursan Heated Hydraulic Rubber Press Four-column hydraulic rubber press with electrically heated upper and lower platens, hydraulic power unit and Delta touchscreen control system. Manufacturer: Uğursan Hidrolik Pres İmalatı Model: Kauçuk Pres Year: 2020 Motor power: 15 kW Electrical supply: 3 × 380 V + N + PE, 50 Hz Control system: Delta touchscreen HMI Control functions: Upper and lower platen temperature, curing time, platen position and pressure/set-weight parameters Automation system: Gani Otomasyon, project no. 14313565, rated current 109 A, maximum main fuse 125 A Configuration: Four-column frame, heated upper and lower platens and hydraulic power unit Condition: Used Approximate dimensions: 1,800 × 1,500 × 3,500 mm Approximate weight: 6,000 kg All descriptions are indicative only. Auction-ID: A1-50546-49

Technical data Manufacturer: INGERSOLL-RAND Type: C47MX2-2RH Serial Number: V-2722 Year of Make: 1989 Power: 350 kW Speed: 2,977 rpm Pressure: 800 kPa Configuration Drive: SCHORCH KR5425K-AA02, 350 kW, 6,000 V, 40 A, 50 Hz, 2,977 rpm Control: ATLAS COPCO Elektronikon, type 1900 0619 80, SN AIF 108950, installed in 2006 Other equipment: connected piping, fittings, pressure gauges and filter/treatment components Remarks Stationary turbocompressor INGERSOLL-RAND in industrial design with SCHORCH drive and ATLAS-COPCO Elektronikon control. Auction-ID: A1-50608-16

pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 140 mm/sec work speed: 10,5 mm/sec return speed: 150 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 220 mm oil volume: 400 ltr. voltage: 380 Volt total power requirement: 30.0 kW weight: 21300 kg range L-W-H: 5350 x 2450 x 3150 mm Features: - DELEM DA66T CNC control system - CNC-controlled axes: Y1, Y2, X, R, Z1, and Z2, as well as CNC crowning - FIESSLER AKAS laser safety device in front of the machine (including FPSC) - Rear safety device: light barrier - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - 2 front support arms - 1 freely movable dual foot control - Upper and lower tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AS Metal Transform Vacuum Membrane Press Industrial vacuum membrane press for forming and laminating panels and similar components. Manufacturer: AS Metal Model: Transform Year: 2018 Serial number: 1801-002 Power: 45 kW Electrical supply: 380 V, three-phase, 50 Hz Air pressure: 6–7 bar Configuration: Sliding vacuum worktable, integrated vacuum/pressure vessel, pneumatic system, heated upper press section, operator control panel and safety mesh guarding Working table: Approx. 2,500 × 1,500 mm Condition: Used Approximate dimensions: 4,400 × 2,700 × 2,900 mm Weight: 6,370 kg All descriptions are indicative only. Auction-ID: A1-50546-22

Technical details Type: Die-cast industrial components Material: Pressure die-cast aluminium alloy (likely) Configuration: - Precision die-cast components - Reinforced ribbed construction - Machined mounting faces - Multiple fixing holes - Uniform production batches Casting markings: - 211.2 - PO 9007 Quantity: Approx. 700–1100 pieces Packaging: - Multiple cardboard cartons Application: - Industrial machinery - Mechanical assemblies - Automation equipment - Machine frame connections - Mounting brackets and housing components Construction: - High-pressure die casting - Precision-machined functional surfaces Dimensions (per component): - Length: Approx. 130 mm - Width: Approx. 45 mm - Height: Approx. 35 mm Weight: Approx. 0.45 kg per component Condition: New old stock (unused) Observed condition: - Uniform finish throughout - No corrosion or wear visible  ...

Membrane Press Loading Tables – 3 pcs. Lot 119 comprising three used loading and transfer tables designed for use with membrane presses. Each table has a heavy welded steel frame, longitudinal guide rails, cross supports, adjustable levelling feet and electrical cabling/connectors. Suitable for supporting and guiding press trays or workpiece carriers during loading and unloading. Quantity: 3 tables Manufacturer: AS Metal Condition: Used Approximate dimensions per table: 3,200 × 1,800 × 1,000 mm Approximate weight: 300 kg per table All descriptions are indicative only. Auction-ID: A1-50546-119

Baler Macpresse MAC 105, press force 70 t, year 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of Make: 2011 Hours: 23130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Filling opening: 1500 x 750 mm Bale chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Binding: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Funnel Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time.  ...

Lg.Nr. 25514 Defective Hydr. CN Press Brake Technical data: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 370 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - Hydr. Upper + Lower - Tool Clamping - Die table displacement pneumatically supported Machine does not drive reverence because 2 axles right in the back gauge are without function, control module may ...

Technical data Maximum pressure: 60 tons Year of manufacture: 2011 Pressing force: 78 tons/m² Number of bindings: 5 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1500 x 1100 mm Bale weight: 425-575 kg Weight: approx. 21 tons Power connection: 400 V Bale tying: automatic Press capacity under operating conditions: max 370 m³ / hour Press capacity at idle: max 940 m³ / hour Theoretical throughput: to density 30kg/m³) 11 tons/hour Theoretical throughput: to density 50kg/m³) 15 tons/hour Theoretical throughput: to density 100kg/m³) 22 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably g ...

225x127x155 No keys available for shutters No coc present Trailer 750kg Auction-ID: A3-46132-11445

Max. operating temperature: 120 °C. Auction-ID: A1-50393-132

Working pressure 150bar – 15Mpa. Work extremely powerful and absolutely environmentally friendly! Maximum temperature 90°C - 284°F Maximum pressure 150bar – 15Mpa Capacity 900 l/h – 15 l/min burner power 3600W motor power 3.0 kW power supply 230V/50Hz detergent tank diesel Auction-ID: A1-40324-149

garage press Type: Hydraulic Workshop Press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 98 kg Condition: Unused Auction-ID: A3-46133-1233

RATIONAL iVario Pro L multifunction cooking system with pressure cooking function, unchecked status. Usable volume of 100 litres and cooking surface of 39 dm² per unit. Suitable for boiling, frying, deep frying and pressure cooking. The pressure cooking function enables fast and gentle cooking, with a maximum overpressure of 300 mbar. Temperature range of 30–250 °C for frying in a pan and 30–180 °C for deep frying. Electrical connection: 3N AC 400 V, 27 kW per unit. Made of stainless steel. Approximate dimensions per unit: 1030 x 894 x 1078 mm.Approximate net weight with pressure option: 235 kg per unit. Serial number provided: E21PK22018061130. Reference: WX9EPRA.0002132. Auction-ID: A7-50721-71

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-46133-1227

RATIONAL iVario Pro XL multifunction cooking system with pressure cooking function, unchecked status. Usable volume of 150 litres and cooking surface of 59 dm². Suitable for boiling, frying, deep frying and pressure cooking. The pressure cooking function enables fast and gentle cooking, with a maximum overpressure of 300 mbar. Temperature range of 30–250 °C for frying in a pan and 30–180 °C for deep frying. Electrical connection: 3N AC 400 V, 41 kW. Made of stainless steel. Approximate total dimensions: 1365 x 894 x 1078 mm.Approximate net weight with pressure option: 263 kg.Serial number: E31PK23028070668. Reference: WW9ENRA.0002138. Auction-ID: A7-50721-42

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kg RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 to TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage be ...

2 x RATIONAL iVario Pro L multifunction cooking systems with pressure cooking function, unchecked status. Usable volume of 100 litres and cooking surface of 39 dm² per unit. Suitable for boiling, frying, deep frying and pressure cooking. The pressure cooking function enables fast and gentle cooking, with a maximum overpressure of 300 mbar. Temperature range of 30–250 °C for frying in a pan and 30–180 °C for deep frying. Electrical connection: 3N AC 400 V, 27 kW per unit. Made of stainless steel. Approximate dimensions per unit: 1030 x 894 x 1078 mm.Approximate net weight with pressure option: 235 kg per unit. Serial number provided: E21PK22018061130. Reference: WX9EPRA.0002132. Auction-ID: A7-50721-43

pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...

UMT AC770-19 | 19 Liter High Pressure Compressor is a professional, robust high pressure compressor with a capacity of 19 liters, designed for demanding applications in industry, workshop or garage. This compressor offers an excellent balance of power, capacity, and ease of use, making it ideal for applying pressure for paintwork, pneumatic tools, and cleaning operations. Capacity: 19 liter reservoir for continuous and stable pressure delivery. Construction: Strong, durable housing with high-quality materials for long-lasting use. Motor: Powerful motor that comes up to pressure quickly and is suitable for intensive use. Pressure level: Suitable for high-pressure applications, with a maximum working pressure that meets industry standards. Ease of use: Easy operation, with pressure control and safe pressure release valve. Mobility: Compact and portable design, ideal for use in a variety o ...

RATIONAL iVario Pro L multifunction cooking system with pressure cooking function, unchecked status. Usable volume of 100 litres and cooking surface of 39 dm² per unit. Suitable for boiling, frying, deep frying and pressure cooking. The pressure cooking function enables fast and gentle cooking, with a maximum overpressure of 300 mbar. Temperature range of 30–250 °C for frying in a pan and 30–180 °C for deep frying. Electrical connection: 3N AC 400 V, 27 kW per unit. Made of stainless steel. Approximate dimensions per unit: 1030 x 894 x 1078 mm.Approximate net weight with pressure option: 235 kg per unit. Serial number provided: E21PK22018061130. Reference: WX9EPRA.0002132. Auction-ID: A7-50721-70

pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

pressure:160 t throat:370 mm stroke:150 mm total power requirement:45 kW weight of the machine ca.:22 t dimensions of the machine ca.:2,75 x 1,85 x x 4,80 m rules for accident prevention:Vorhanden work table::1500 x 700 mm Documents:vorhanden