135,418 used machines on RESALE, but how to find them? Machine Search
Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50066-149
Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50066-249
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50208-249
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50066-347
An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50066-62
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50066-418
Production: 30 to 60 kg/h Briquettes: Diameter: Ø 55 mm Motorization: Pump motor power: 5.5 kW / 7.5 HP Power supply: 380 V / 50 Hz Hydraulic: Briquette cylinder Ø 120 mm Pushing power: approx. 700 kg/cm² Drawer cylinder Ø 40 mm Mechanical elements: Cylindrical ferrule Ø 1,000 mm Machine dimensions: 1,650 × 1,150 × 1,460 mm Weight: 830 kg Auction-ID: A1-50215-1
The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50066-39
CONTROLS PLC SIEMENS SIMATIC OP 27 PRESS DESIGN table cushion: yes PRESS FORCES total force (nominal): 300 to PRESS TABLE table surface (left-right): 1800 mm table surface (front-back): 1000 mm SLIDE stroke: 600 mm SLIDE (HYDR. PRESS) return force: 38 to DIE CUSHION (TABLE CUSHION) stroke: 200 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1000 mm DIMENSIONS / WEIGHTS total weight approx.: 43000 kg
Dough dividing and knitting machine (bun press) ERIKA RECORD, Type: Erika Automat Type 4 -Very good condition- - little used - For precise dividing and rounding of a wide variety of dough types - 40 - 120g per piece of dough - Fully automatic workflow - Machine parts in oil bath, no lubrication necessary - Easy cleaning thanks to tilting machine head - Incl. 4 knitting plates with 30 troughs each - Dough-friendly operation - Easy to use - Machine made of stainless steel - Instruction manual Technical data: - Number of divisions: 30 pieces - Well size: No. 4 for 40 - 120g - Dough weight: 40 - 120 g - El. Connection: 380 / 3 V, 50 Hz, 3.8 A, 1.5 kW The machine is in mint condition and is immediately ready for use. Inspection and test run are possible by arrangement.
Main technical data of the installation: Heating plate dimensions: 2600 × 4200 mm Pressing surface: 9.16 m² Total pressure: 120 N/cm² Total pressing force: 11,000 kN Heating medium: Hot water Maximum pressing temperature: 130 °C Heat demand during the first 72 hours of operation: 200,000 kcal/h during heating from 15 °C to 100 °C within one hour: 360,000 kcal/h Total electrical connected load: 120 kW Power supply: 400 V AC, 3-phase Control voltage: 25 V Frequency: 50 Hz Required compressed air consumption: at air velocity 30 m/s: 8,500 m³/h Required air pressure: 6 bar Intended workpiece dimensions Length: 1800 / 2465 mm Tolerance: +3 / –1 mm Width: 1200–1250 mm Tolerance: +3 / –1 mm Thickness: 6–8 mm Tolerance: ±0.1 mm As standard, the equipment is intended for workpieces with a length of 2465 mm . However, th ...
CONTROLS PLC SIEMENS S7 PRESS DESIGN drive system: hydraulic quick die change system: yes feedstock transport direction: right to left SLIDE total force (nominal): 400 to stroke: 200 mm COUNTER RAM nominal force: 100 to stroke: 30 mm V-RING nominal force: 200 to stroke: 30 mm TOOL DIMENSIONS lower table (left-right): 650 mm lower table (front-back): 650 mm shut height max.: 420 mm passline opening (free passage in side columns): 420 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 12 mm feed velocity max.: 30 m/min feedstock transport direction: right to left LEVELLER UNIT sheet width max.: 500 mm sheet width (min): 60 mm sheet thickness max.: 12 mm sheet thickness min.: 1 mm integrated feed function: yes STRIP-FEEDER sheet width max.: 400 mm sheet ...
CONTROLS electronic controls WORKING RANGE PRESS BRAKE total force (nominal): 85 to Working length: 2050 mm distance between columns: 1700 mm BENDING BEAM (Y-AXIS) stroke: 215 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 2000 mm total height: 2400 mm total weight approx.: 8300 kg
Key data: 44 t, 1600 mm, 1530 mm
Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. Ibjbmlszymb Seurhasb 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!
Self-loading baler GRECON DIMTER ProfiPress PP 2500-3HF Working length 2500mm Working width 1300mm Automatic material loading Automatic glue application Shelves heated by a high frequency generator Material thickness softwood min/max 11-60mm Material thickness hardwood min/max 11-40mm Material width min/max 30-150mm Length of the fed material min/max 300-2500mm Year of manufacture 2001 CE Certificate
• Presumably used for punching pipes. • Passage diameter: approx. 450 mm
Key data: 44 t, 1600 mm, 1530 mm
Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!
Incl. foot switch and the bending tool located on the machine. • hydraulic oil volume: 120 l
CONTROLS electronic controls BECKHOFF PRESS DESIGN drive system: servomechanic number of slide actions: 1 PRESS FORCES total force (nominal): 100 to PRESS TABLE table surface (left-right): 950 mm table surface (front-back): 660 mm SLIDE slide force: 100 to table surface (left-right): 550 mm table surface (front-back): 460 mm spigot hole diameter: 50 mm stroke rate (max.): 130 /min SLIDE (MECHAN. PRESS) slide adjustment: 80 mm stroke min.: 20 mm stroke max.: 160 mm stroke rate (min.): 70 /min stroke rate (max.): 130 /min main drive power: 25 kW TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 370 mm DECOILER design: single reel sheet width max.: 400 mm coil weight max.: 1.25 to max. diameter of coil: 1250 mm mandrel expansion range from: 375 mm mandrel expansion range u ...
pressure: 135 t chamfer lenght: 3600 mm distance between columns: 3150 mm stroke of upper beam: 200 mm ajustment speed: 70.0 mm/sec working feed: 10.0 mm/sec return speed: 80.0 mm/sec : 315 bar dayligth: 400 mm table height: 915 mm column arm: 250 mm engine output: 15.0 kW weight: 8800 kg range L-W-H: 4200 x 1700 x 2600 mm Equipment: - Electro-hydraulic press brake with torsion bar - HACO NC control (Model ATL 550) for X and Y axes Computer-controlled multi-axis NC press Backgauge position pre-selection (electric backgauge) Backgauge retraction for Z-bends Bending depth pre-selection Electric depth adjustment Memory for 200 programs - Swiveling control panel (front left) - NC motorized backgauge (X-axis) with 2 manually adjustable stop fingers - NC motorized depth adjustment (Y-axis) - 1x set of sectionalized gooseneck (swan-neck) upper tools - 1x rotatable MULTI-V die block - Re ...
pressure: 10 t stroke: 380 mm table-size: 800 x 700 mm working speed:: mm/ sec. return speed: mm/sec work height max.: mm total power requirement: 4,0 kW : 90 mm weight: 2,5 t dimensions: 2,2 x 1,4 x 1,6 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS S7 SLIDE total force (nominal): 630 to TOOL DIMENSIONS lower table (left-right): 900 mm lower table (front-back): 900 mm shut height max.: 900 mm
pressure: 93 ( 100 ) t stroke: 165 mm table surface area: 990 x 400 mm total power requirement: 1 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 2 x 1 x 2,2 / 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: gebraucht : 2015 : 080242 : prompt, Zwischenverkauf v : Türkei : 38900 € : 175 to : 3050 mm : 4 : 265 mm : 2600 mm : 410 mm : hydraulisch : 120 mm/s : 10 mm/s : 100 mm/s : 18.5 kW : 4250 mm : 1850 mm : 2770 mm : 10520 kg 4 axes (Y1, Y2, X, and R-axis) Cybelec DNC 880 S CNC control - 2D graphic display - User-friendly conversational programming - Automatic bending sequence calculation - Automatic calculation of developed length for blank cutting - Product and tool memory - Correction capability - USB ports for backup and program storage CNC-controlled backgauge on linear guide and ball screws Backgauge finger blocks on linear guide CNC-controlled crowning New upper tool 1010/A/75°/0.8/105, sectional and gooseneck New lower tool 2009/85° (V = 16, 22, 35, and 50 mm), sectional Fiessler AKAS laser safety device mounted on the upper beam 2 sheet support arms on linear guides Foot pedal ...
Specially designed for stamping, die cutting, and forming work. Model CM-50NC Power 50 TN Motor power 5.5 KW Throat depth 265 mm Working speed 9.9 mm/s Approach speed 50 mm/s Return speed 66 mm/s Maximum pressure 320 bar Piston stroke 250 mm Lower table 700 x 450 mm Upper table 550 x 300 mm Maximum vertical light 400 mm Working height 850 mm Total front 1.160 mm Total lateral 1.290 mm Total height 2.085 mm Weight 1.750 kg STRUCTURE AND TABLES The CM/NC series hydraulic presses consist of an electro-welded structure made exclusively of S355JR steel. It is stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. Calculated and designed with finite element software. With all this, we always guarantee our high standards of precision and quality. They are equipped with an upper table and a lower table made of C45E ste ...
TECHNICAL DATA: Working area: 3000 x 1300 mm Pressure plungers: 06 Press piston with Ø 70 mm (stroke 260 mm) 02 Reciprocating piston with Ø 40 mm (stroke 270 mm) Stop piston: 04 Piston for closing with Ø 70 mm (stroke 260 mm) 02 Opening piston with Ø 40 mm (stroke 270 mm) Installed power: 22 kW EQUIPPED WITH: Loading bench with pusher Discharge bank Boiler for heating diathermic oil
Development Tablet Press Manufacturer: Romaco Kilian Model: RLS 15 Year: 1985 Serial Number: 30869 700098 796 Rotary 15 stations Punches type 20/28 Tools present (details on request) Incoterm: FCA Auction-ID: A1-50259-14
Nuts, and so on; Includes 7 plastic stacking crates with dimensions 400 x 600 mm Auction-ID: A1-49785-374
Reference: 744-05; own weight approximately 100 kg Auction-ID: A1-49785-260
Reductions, and so on; In 17 cardboard boxes Auction-ID: A1-49785-375
High-pressure cleaner, hot water high-pressure cleaner -Manufacturer: Ehrle, Hot water high-pressure cleaner -Type: HD 1140 Electronic II -Operating pressure: 30-230 bar -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C -Power connection: 3/PE/AC/50Hz/400V -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm -Weight: 225 kg
TOX Pressotechnik Hydropneumatic Clinching Pliers TZ 05.573508 Auction-ID: A7-50356-11
Tox Pressotechnik Curve Press KKG 090.200.90.009.A.001 incl. STE 075-892-1/2\" Dimensions: 150 x 80 x 70 cm Auction-ID: A7-50356-5
Tox Pressotechnik Clinching Pliers TZ 05.650404 incl. EPMR 0.55.34.100.000 Auction-ID: A7-50356-9
Max. working width [mm] 3100 Distance between columns [mm] 2700 Depth stop [mm] 700 Tool Holder Standard Type of tool holder European-style Tools included Yes Auction-ID: A1-40982-27
Tox Pressotechnik TZ 05.589753 incl. STE 075-904-1/2\" incl. RKZ05.35.100.07H.LF Dimensions: 120 x 80 x 80 cm Auction-ID: A7-50356-4
Tox Pressotechnik Clinch Pliers TZ 05.589734 incl. STE 075-904-1/2\" + RZK05.35.100.07H.LF Auction-ID: A7-50356-8
General Description Hydraulic workshop press manufactured by OMCN , model 204/RE . Designed for heavy-duty pressing, straightening, assembling and disassembling operations in industrial workshops and maintenance facilities. The press features an H-frame welded steel construction with an adjustable work table. Technical Details Manufacturer: OMCN Model: 204/RE Machine type: Hydraulic press Year: 2003 Press capacity: 150 t Operation: Hydraulic with electric motor and manual valve control Bed size: Approx. 850 × 650 mm Adjustable bed with multiple height positions Frame: H-frame welded steel construction Hydraulic pressure gauge: WIKA, 0–600 bar Condition Used industrial condition. Complete hydraulic press with adjustable bed, hydraulic pressure gauge and manual control valves. Operational status has not been tested. Dimensions Overall dimensions and weight: Not co ...
Year: 2018 Control System: Delem DA-66T Number of Axes: 6 (Y1 + Y2 + X + R + Z1 + Z2) Operating Hours: 2,442 h Power: 15.8 kW Press Force: 120 tons Maximum Working Width: 3,100 mm Column Gap: 2,550 mm Backgauge Depth: 750 mm Max Stroke: 260 mm Crowning System: CNC-controlled Punch Holder: Standard (European-style) Tools Included: Yes Options: Finger safety guard Documentation: Available CE Certificate: Yes Video available Auction-ID: A1-40982-6
Tox Pressotechnik Pneumatic Curve Press KGG 090.200.90.010.A.001 Dimensions: 120 x 80 x 50 cm Auction-ID: A7-50356-6
Tox Pressotechnik TZ 05.573633 incl. STE 075-904-1/2\" incl. RZK05.35.100.07H.LF Dimensions: 180 x 120 x 100 cm Auction-ID: A7-50356-1
Control Conventional Power [tonnes] 63 Max. stroke [mm] 200 Table length [mm] 630 Table width [mm] 525 Ram length [mm] 1100 Motor power 20.0kW Auction-ID: A1-40982-28
Year: 2014 Manufacturer: KÄRCHER Model: HD 1050 B Serial No.: 011954 Power: 9.5 kW Flow rate: 13 l/min Operating pressure: 230 bar Max. pressure: 250 bar Max. temperature: 60 °C Weight (kg): 74 Equipment: Honda GX390 petrol engine, high-pressure pump with chemical dosing adjustment, high-pressure couplings, movable tubular chassis with wheels. Auction-ID: A1-50088-24
CONTROLS electronic controls PRESS DESIGN number of suspensions: 2 opening in table: yes PRESS FORCES total force (nominal): 45 to PRESS TABLE table surface (left-right): 550 mm table surface (front-back): 450 mm SLIDE slide force: 45 to table surface (left-right): 550 mm table surface (front-back): 360 mm stroke: 50 mm stroke rate (max.): 400 /min SLIDE (MECHAN. PRESS) slide adjustment: 50 mm stroke min.: 10 mm stroke max.: 50 mm stroke rate (min.): 80 /min stroke rate (max.): 400 /min TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 305 mm Grid 2016 Completely Overhauled
Capacity: 30 - 50 kg/h Diameter of the briquets: 50 mm Motor output: 5,5 kW Dimensions (L/W/H): 2000 x 1300 x 1400 mm Weight: 500 kg : Kg : 1 m³ The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 4000 t stroke: 380 mm dayligth: 1050 mm distance between columns: 1580 mm table-size: 1520 x 1600 mm dimension of ram: 1470 x 1500 mm ram adjustment: 15 mm strokes of ram per min.: 50 ejector path: 31 / 70 mm main drive: 200 kW height over floor: 7520 mm total power requirement: ca. 250 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 4,4 x 4,6 x 7,5 m complete forging line includes an - Smeral Hot Forging Press - induction heater - Manyo 460-millimeter forging roll - manipulator with forging roll link - SMERAL 500-ton trimming press The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
45 € 
