press eccentric used for sale

Hello, We hereby offer you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Hours 15606 Hours Press force main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm approx. 6.7 t/hour Machine weight press 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block replaced) and tested on the fly, in manual and automatic mode. The machine documentation is available in German. A tour of the press is possible by appointment in our workshop. We would be happy if  ...

Slotted Hole Drilling Machine Panhans Type 116 Year of manufacture 1997 With dowel device Two-jaw drill chuck 1-20 mm Table fixed, drilling support movable 1 eccentric clamp on the table Table size 700 mm x 380 mm Maximum drilling depth 145 mm Maximum elongated hole length 240 mm Height travel 135 mm Motor power 1.5 kW Speed 3000 rpm. Weight approx. 200 kg

For sale is a Styrofoam block press manufacturer Wemhöhner, the press is in good condition and can be viewed by appointment. I will be happy to answer any further questions you may have.

Key data: 100 t

For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force of up to 100 T. The machine has a table size of 800 × 600 mm, a maximum installation height of 700 mm and an adjustable stroke of up to 500 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. Here are the technical data of the offered machine: Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Title: Hydraulic Single Column Press - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15–100 T (adjustable) - Max. installation heigh ...

Key data: 175 t, 4050 mm, 3600 mm

Capacity: 4050 mm x 175 Ton. Distance between frames: 3600 mm. Stroke: 265 mm. Control: DURMA DT15 (3D Touch Screen). Dimensions: 5200 x 1900 mm. Height: 2930 mm. Weight: 12,750 Kg.

CONTROLS   PLC SCHNEIDER PRESS DESIGN   drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES   total force (nominal): 66 to SLIDE   slide force: 6 to   stroke: 114 mm SLIDE (MECHAN. PRESS)   variable speed: yes   stroke rate (min.): 40 /min   stroke rate (max.): 130 /min   main drive power: 7.5 kW STRIP-FEEDER   feeder type: roll feeder TRANSFER SYSTEM   distance between tools, stroke X fixed: 82 mm DIMENSIONS / WEIGHTS   space requirements -left/right-: 2875 mm   space requirements -front/back-: 1500 mm   total height: 2900 mm   total weight approx.: 7500 kg ATTACHMENTS (PRESSES)   safety guard / safety door: yes   2-hand engagement: yes   noise protection cabin: yes   acc. to actual accident protection regulation: yes Specifications: Number of stations: 12 (11+1) Capacity ...

Press brake manufactured in 2008. This Warcom DINAMICA 3000x100 features a bending force of 100 tons and a bending length of 3000 mm. It is equipped with an 8-axis backgauge system and a CNC Delem DA65 control for precision operations. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 3000x100 machine we have for sale. Contact us for further details regarding this machine.

Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

Key data: 100 t

For sale is a used spotting press from the manufacturer Reis with an adjustable press force of up to 100 t. The 4-column press has a table size of 1600 × 1300 mm, a maximum open height of 950 mm and an ejector in the table, making it particularly suitable for spotting, tuning and tool work in mould and tool making. Here are the technical data of the offered machine: Technical data + information: Spotting press – REIS TUS 80-100 Allgemeine Disclosures - Name: spotting press - Manufacturer: REIS - Type: TUS 80-100 - Type: 4-column press - Year of construction: 1998 - Press force: 26–100 T (adjustable) - Retraction force max.: 45 T - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Open height max.: 950 mm - Overall dimensions (WxDxH): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm Hydraulik - Hydraulic pum ...

Press brake manufactured in 2019. This FEYSAMA MCCH 6/3050 features a press force of 135 tons and a bending length of 3200 mm. It includes a programmable stroke of 160 mm and a backgauge with a stroke of 800 mm. If you are looking to get high-quality bending capabilities, consider the FEYSAMA MCCH 6/3050 press brake we have for sale. Contact us for further details.

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

7 assen: Y1 / Y2 / X / X2 / Z1 / Z2 / R Amadabombeertafel met Digipro-optie: CNC-buighoekmeetsysteem Sick laserbeveiliging aan de voorkant Plooimessen in een gereedschapskast: • 00300 – 60° - R6.0 2x 835 • 04706 – 88° - R0.6 4x 835 • 05206 – 88° - R0.6 10, 15, 20, 40, 50, 100R, 100L, 200, 300 • Z24511 – 45° - 0,37° 4x 835 • Z24512 – 45° - 0,37° 415 • Z24513 – 45° - 0,37° 10, 15, 20, 40, 50, 100L, 200, 300 • 45308 – 88° - R0.8 10, 15, 20, 40, 50, 100R, 100L, 125, 138, 200, 270, 300, 310, 370, 835 Buigmatrijzen in een gereedschapskast: • 07900 – 88° - V20 4x 835 • 07980 – 88° - V20 10, 15, 20, 40, 50, 100, 200, 400 • 07700 – 88° - V16 4x 835 • 07780 – 88° - V16 10, 15, 20, 40, 50, 200, 400 • T12451 5x 835 • 129001 5x 835 Capacity: 130 ton x 4100 mm Backgauge: CNC Control: AMNC-PC Touch Passage between uprights: 3760 mm Max ...

A repair-required CNC press brake Amada is available. Press force: 1000kN, max. stroke: 200mm, working width: 3100mm, passage: 2690mm, throat depth: 400mm. Machine dimensions X/Y/Z: approx. 3600mm/2100mm/2600mm, weight: approx. 6500kg, operating hours: approx. 37661h. The cylinder control has a defect. Documentation available. An on-site inspection is possible.

Table dimensions: 1000,400 mm pneumatic clamping: 4 St. moveable: ja For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible.

We sell a WP roll press type Rotamat EN . Bakery condition

Manufacturer: Heidelberg Model: Linoprint CV Year of Manufacture: 2015 Type of Machine : Digital Colour Press Total Colour Impressions: 1,345,950 Total Black and White Impressions: 445,200 INCLUDED ACCESSORIES - 3x Large Capacity Paper Cassette (triple configuration) - Finisher SR 5050 - EFI Fiery Controller E-43A Find more here - / Contact us at -

Hydraulic press brake 120x3100

For sale is a hydraulic single-column press (C-frame) with a press force of 100 t. The machine has a table size of 700 × 750 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Type: Single column press / C-frame - Press force: 100 T - Table size: 700 x 750 mm - Max. distance plunger – table: 550 mm - Working height: 1000 mm - Overall dimensions (WxDxH): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / holes: DIN 650 / 22 mm Hydraulikzylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Replaceable crimping head: Ø 100 mm Hydraulikaggregat ...

CARDBOARD PRESS SPECIFICATIONS Manufacturer: Presona Model: LP50VH2 Year of Manufacture: 2014 Maximum Pressing Force: 500 kN Maximum Oil Pressure: 25 MPa Type: Cardboard Press Condition: Used CONVEYOR BELT SPECIFICATIONS Manufacturer: Topeko Year of Manufacture: 2008 Length: 18 metres Width: 1.25 metres Motor: 40 kW Voltage: 400V / 50Hz Refurbishment: Completely rebuilt September 2024(chains, belts, all components replaced, outer frame only retained) Find more here - / Contact us at -

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

(1985) 630t Gräbener Knuckle-Joint Press High-Performance Knuckle-Joint Press This 1985 Gräbener knuckle-joint press is a high-capacity machine engineered for applications requiring extreme force at the bottom of the stroke, such as coining and cold forming. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKN 630 Year of Manufacture: 1985 Nominal Force: 630t Stroke: 112 mm Stroke Rate: 55 strokes/min Shut Height: 800 mm Tool Holder Adjustment: 80 mm Motor Output: 25 kW Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, 50Hz

(1973) 180t Gräbener Knuckle-Joint Press Precision Knuckle-Joint Press for Detailed Cold Forming This 1973 Gräbener model utilizes a knuckle-joint mechanism to deliver high pressing force with controlled ram speed, making it ideal for precision coining and embossing tasks. It features a compact design with a 180-ton capacity and is equipped with a 5.5 kW motor for reliable industrial operation. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 180 Year of Manufacture: 1973 Nominal Force: 180t Stroke: 50 mm Stroke Rate: 40 strokes/min Shut Height: 305 mm Tool Holder Adjustment: 40 mm Clearance Between Uprights: 390 mm Table Area (Width x Depth): 370 mm x 450 mm Tool Holder Mounting Surface (Width x Depth): 360 mm x 200 mm Tool Holder Shank Hole (Ø x Depth): 40 mm x 75 mm Motor Output: 5.5 kW Motor Speed: 1,450 ...

(2000) 1000t Müller Knuckle-Joint Press High-Capacity Precision Knuckle-Joint Press This modern model represents a significant leap in pressing power, offering a massive 10,000 kN capacity and it is designed for large-scale precision operations. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Müller Model: KNP 1000 Machine Number: 2912 Year of Manufacture: 2000 Nominal Force: 1000t Work Capacity: 33 kJ Ram Stroke: 100 mm Ram Adjustment: 65 mm Stroke Rate: 40 strokes/min Shut Height (Table to Ram): 400 mm Ram Surface Area (W x D): 700 mm x 500 mm Table Surface Area (W x D): 700 mm x 750 mm Motor Output: 30 kW Operating Voltage: 400 V Safety Distance: 225 mm Limit Value (Stopping Time): 97 ms Total Weight: 42,000 kg Machine Dimensions (W x D x H): 2.3 m x 3.4 m x 4.1 m

(2013) 400t Müller Knuckle-Joint Press Precision Knuckle-Joint Press for High-Speed Forming This year-2013 Müller press provides a 4,000 kN pressing capacity and a high-efficiency 55 strokes per minute cycle rate. Engineered for modern industrial precision, it features safety response times suitable for high-volume production environments. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Müller Model Type: KNP 400 Machine Number: 2703 Year of Manufacture: 2013 Nominal Force: 400t Work Capacity: 13 kJ Ram Stroke: 70 mm Ram Adjustment: 45 mm Stroke Rate: 55 strokes/min Shut Height (Table to Ram): 380 mm (Stroke down, adjustment up) Ram Surface Area (W x D): 500 mm x 400 mm Table Surface Area (W x D): 500 mm x 500 mm Motor Output: 15 kW Operating Voltage: 400 V Safety Distance: 190 mm Limit Value (Stopping Time): 95 ms Total Weight: 1 ...

(1978) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1978 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Frame Width: 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time: 206 ms Safety Distance: 330 mm

(1979) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1979 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Clearance Between Uprights (Frame Width): 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time (Stopping Time): 160 ms Safety Distance: 266 mm

(1986) 600t Gräbener Knuckle-Joint Press Fully Automated High-Precision Short-Stroke Forming This knuckle-joint press delivers a nominal force of 600 metric tons, designed for high-precision forming applications requiring controlled force near bottom dead center. Technical Details ‍ ‍Machine Type: Knuckle-Joint Press Model: GK 600 ‍Nominal Force: 600t ‍Year of Manufacture: 1986 ‍Rated Force Travel (Pressing Path): 1.7 mm ‍Nominal Work Capacity: 10,200 Nm ‍Stroke: 100 mm ‍Stroke Rate: 45 strokes/min ‍Shut Height (Max. Die Space): 360 mm ‍Tool Holder Adjustment: 50 mm ‍Clearance Between Uprights: 580 mm ‍Table Area (Width x Depth): 550 mm x 430 mm ‍Tool Holder Shank Hole (Ø x Depth): 65 mm x 105 mm ‍Motor Output: 15 kW ‍Motor Speed: 1,500 rpm ‍Pneumatic Connection Pressure: 5.5 bar ‍Operating Voltage: 3x 380V / 220V,  ...

Available from June 2026 Presto HPK 50 BS baler, built in 2011, with vorbulator and optional chain belt conveyor Horstmann Manufacturer: Presto Type: HPK 50 BS Year of Make: 2011 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 1050 mm (LxW) Channel cross-section: 700 x 1100 mm Filling volume, max. 1.23 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 6 t/h 60 kg/cbm: 9.6 t/h 100 kg/cbm: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Data Chain Belt Conveyor Manufacturer: Horstmann Type: PK 1100/11 Year of Make: 2011 Belt width 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed length approx. 3000 mm Climbing part approx. 5000 mm Gooseneck approx. 1000 mm The press is still in use and can be viewed under operating conditions. It will be available from the beginni ...

Record Gr.2 Semi-Automatic Roll Press Dough Dividing and Rounding Machine - Manufacturer: Record - Semi-automatic bun press - Size 2 - Weight range: 25- 85 grams - 30 pieces - 380 volts - Machine is completely NEW painted

(1994) 1250t Wolff Knuckle-Joint Press High-Precision Knuckle-Joint Press for Massive Forming Loads This Wolff press is a heavy-duty powerhouse, delivering a massive 12,500 kN of force specifically rated at 30° before Bottom Dead Center. Engineered for longevity and extreme precision, it features a 32-ton frame, permanent oil pressure lubrication, and electronic force monitoring to ensure consistent performance during high-capacity cold-forming operations. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Wolff Model: KHP 1250 Year of Manufacture: 1994 Nominal Force (30° before BDC): 1250t Stroke Rate (Continuous): 25 strokes/min Ram Stroke: 90 mm Ram Adjustment: 70 mm Shut Height (min/max): 490 mm / 560 mm Max. Distance (Table to Ram): 625 mm Clearance in Ram Frame: 680 mm Table Surface Area (W x D): 660 mm x 660 mm Ram Surface Area ( ...

Erika Record Automatic 3-30 Roll Press Dough Dividing and Casting Machine - Manufacturer: Karl Schmidt GmbH - Model: Erika Record Automat - Type: 3-30 - 30 pieces - Incl. 3 plastic knitting plates - Machine is mobile on castors - Machine is technically and optically in very good condition Technical data: - Weight range : 30gram to 100gram -Dough insert: 900 grams to 3000 grams - Year of manufacture: refurbished 2016 - 400 volts

hydraulic press with hot platens by with thermal oil model COLOMBO REMO second hand machine for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm. 80 max. thrust Ton. 120 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 3 heating by with thermal oil weight kgs. 5500 volt. 380/50

hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO second hand machine DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 n.08 cylinders diam.mm. 80 max. thrust Ton. 150 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil weight kgs. 9.500 volt. 380/50

(1979) 360t Gräbener Knuckle-Joint Press High-Force Knuckle-Joint Press for Precision Forging and Coining This Gräbener GK 360 is a specialized industrial press designed for operations requiring extreme force and high-definition detail, such as coining, cold forging, and precision sizing. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 360 Year of Manufacture: 1979 Nominal Force: 360t Stroke Length: 90 mm Stroke Rate: 60 strokes/min Max. Flywheel Speed: 360 rpm Shut Height: 430 mm Tool Holder Adjustment: 40 mm Motor Power: 28 kW (1,475 rpm) Operating Voltage: 380V / 220V, 50 Hz Pneumatic Requirement: 6 bar Overrun Time: 123 ms Safety Distance: 197 mm Total Weight: approx. 6,500 kg

(1988/2025) 600t Gräbener Knuckle-Joint Press Heavy-Duty 600-Ton Precision Forming Press - 2025 General Overhaul This Gräbener GKS 600 is a high-capacity knuckle-joint press designed for demanding metal-forming tasks like cold forging, embossing, and heavy-duty coining. It was manufactured in 1986 and has undergone a complete general overhaul in 2025, ensuring modern reliability while maintaining its massive 6,000 kN nominal force. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKS 600 Nominal Force: 600t Year of Manufacture: 1988 (General Overhaul: 2025) Stroke Length: 160 mm Production Speed: 35 strokes per minute Nominal Energy: 10,200 Nm Nominal Force Path: 1.7 mm Frame Width: 580 mm‍ Table & Tooling Dimensions Table Surface (W x D): 550 mm x 620 mm‍ Ram/Tool Holder Surface (W x D): 550 mm x 430 mm‍ S ...

(1994/2026) Gräbener 360t Knuckle-Joint Press Precision 360-Ton Forming Press - 2026 General Overhaul This Gräbener GK 360 is a high-precision mechanical press designed for specialized metalworking tasks such as coining and cold forging. This unit has been freshly overhauled in 2026, combining its proven knuckle-joint engineering with modern reliability. Technical Details ‍ Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 360 Press Capacity: 360t Year of Manufacture: 1994 (General Overhaul: 2026) Stroke Length: 60 mm Production Speed: 60 strokes per minute Frame Width: 460 mm Machine Weight: approx. 6,300 kg‍ Table & Tooling Dimensions Table Surface (W x D): 440 mm x 525 mm‍ Ram/Tool Holder Surface (W x D): 440 mm x 320 mm‍ Tool Holder Adjustment: 40 mm‍ Shank Hole: 65 mm x 105 mm deep

This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 55 to PRESS TABLE   table surface (left-right): 750 mm   table surface (front-back): 450 mm SLIDE   table surface (left-right): 400 mm   table surface (front-back): 300 mm   spigot hole diameter: 45 mm   stroke: 50 mm   stroke rate (max.): 100 /min SLIDE (MECHAN. PRESS)   slide adjustment: 70 mm   stroke min.: 6 mm   stroke max.: 50 mm   stroke rate (min.): 50 /min   stroke rate (max.): 100 /min TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 310 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1200 mm   space requirements -front/back-: 1500 mm   total height: 2500 mm   total weight approx.: 3850 kg ATTACHMENTS (PRESSES)   strip feeder: optional   fe ...

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 40 to PRESS TABLE   table surface (left-right): 650 mm   table surface (front-back): 380 mm   thickness of bolster plate: 60 mm   opening in bed (diameter): 120 mm SLIDE   table surface (left-right): 350 mm   table surface (front-back): 250 mm   spigot hole diameter: 40 mm   stroke: 78 mm   stroke rate (max.): 145 /min SLIDE (MECHAN. PRESS)   slide adjustment: 60 mm   stroke min.: 8 mm   stroke max.: 78 mm   main drive power: 3 kW TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 297 mm ELECTRICAL SPECIFICATIONS   total power consumption: 3.05 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1300 mm   space requirements -front/back-: 1100 mm   total height: 2150 mm   total weig ...

The Dorst TPA 70S is a used powder compaction press, known for its precise and reliable performance. It delivers a maximum pressing force of 700 kN with a withdrawal force of 400 kN, making it suitable for diverse compaction needs. The machine features a pressing travel of up to 30 mm, with a maximum filling height of 70 mm and operates at speeds between 14 to 40 strokes per minute. This ensures efficient throughput, ideal for high-demand production environments. With an upper punch stroke of 120 mm and adjustable travel of 200 mm, the Dorst TPA 70S offers flexibility in application. It requires a compressed air supply with an intake of approximately 200 liters per minute, and operates on a total connected load of about 20 kW. To enhance functionality, the machine is constructed robustly, maintaining a workplace-related sound level of 78 dB(A), and features a press housing capacity of 19 ...

The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...

DHS-200 – 200 T Hydraulic Heating Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a hydraulic heating press DHS-200 with a pressing force of 200 T and an extendable sliding table system. The machine has heating plates ranging in size from 800 × 800 mm, an open height of 800 mm and a hydraulic stroke of 600 mm, and is particularly suitable for laminating, forming and thermal pressing processes with temperature-controlled tools. Technical data + information: Hydraulic Heating Press DHS-200 – 200 T General information - Type: Hydraulic heating press with sliding table - Pressing force: 200 t - Usable area table: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (WxDxH): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg ...

Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.

Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible.

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changerNumber of tools 32NC rotary table w. swivel axisNC rotary table with swivel axisRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interfaceRotation Speed 5. Axis 26 rpm5. Axes (swivelling range) 0 - 180 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 33 rpmDistance between T-Slots 63 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 200 KgCentre bore 30H7 mmTable surface 500 x 380 mmType of Measuring system Direct measuring systemSpecial equipmentSealing air in swivel rotary table

pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand  ...