137,503 used machines on RESALE, but how to find them? Machine Search
A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible.
Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging
punching pressure: ca. 3,2 t air pressure: 8 bar stroke: max. 20 mm distance between columns: ca. 250 x 200 mm weight of the machine ca.: 52 kg incl. various tools, see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure power: 6-8 bar Air consumption: 8 l/Hub height of stroke: 12 mm : 134 mm no. of strokes: 400 Hub/min punching force max.: 3500 kp weight of the machine ca.: 80 kg Schüco pneumatic press for Schüco punching tools Art. No. Schüco: 290 124 manual included various pressing tools included! tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for secure and quick fastening of the press tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,
SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm 4 push-button plate suspension handles TS/500 Interface 4 safety light barriers Installed power: 3 kW
Stock number: P348, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: High pressure pump, Construction: Mounted on stainless foundation with wheels, Motor: Variator gear - 3,0 kW - 350–1750 rpm., Manufacturer: Rannie, Type: 18.50, Other: Serial no. 4661/71
Stock number: D568, Material: Steel 37, Liter: 12, In stock: Yes, Amount in stock: 1 pc., Item: Tincture press, Diameter: Ø 250 mm, Other: Mechanical
Stock number: H068, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Low pressure homogenizer, Theoretical capacity: 600 l/h., Working pressure theoretical: Max 10 bar, Manufacturer: Gaco, Type: AL-70, Other: Table model
Stock number: H056, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Low pressure homogenizer, Theoretical capacity: 600 l/h., Manufacturer: Gaco, Type: AL, Other: Table model
Stock number: H063, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Low pressure homogenizer, Theoretical capacity: 600 l/h., Manufacturer: Gaco, Type: AL, Other: Table model
Stock number: H050, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Low pressure homogenizer, Motor: 2,2 kW - 220/380 Volt - 1420 rpm., Manufacturer: Gaco, Type: 2
Stock number: H046, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 4 pcs., Item: Low pressure homogenizer, Motor: 0,75 HP - 220/380 Volt, Theoretical capacity: 600 l/h., Stage: 1, Manufacturer: Gaco, Type: AL-55, Other: The homogenizer has not been used
Stock number: SF171, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Gel press filter column, Construction: Hanging in tiltable stand, Top: Air controlled press cylinder, Bottom: Product filter, Dimensions: Column - Ø 300 x H 1000 mm , Type: Dan-Process
Stock number: SF061, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Pressure filter, Standing: On legs, Top: Hinged, bolted lid, Chamber: Ø 530 x H 450 mm, Manufacturer: ALA, Type: E size 45, Other: Stainless stack of plates for 6 filters
High: 2.050 mm, Long: 750 mm, Force: 10 tons, Width: 600 mm, Weight: 800 Kg., Neckline: 150 mm, Stem travel: 200 mm, Rate of climb: 10 cm / sec, Piston rod ø of: 65 mm, Surface of the table: 300 x 300 mm., Specification: Hydraulics
Stock number: SF015, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Gel press filter column, Construction: Hanging in tiltable rack, Top: Air driven pressing cylinder, Bottom: Product filter, Dimensions: Ø 200 x H 900 mm, Manufacturer: Dan-Process, Other: Dynamic axial compression (DAC) flow-through bed
Equipment Description Used Indirect Extrusion Press • Brand / Model: SMS Hasenclever 28 / 31.5 MN McKechinstrang” • Type: Horizontal indirect extrusion system for non-ferrous billets • Drive: Mechanical main unit with hydraulic auxiliaries • Country of Origin: Germany • Current Status: Dismantled and available for dispatch • Serial No. / Year of Manufacture: [To be confirmed] 2. Key Technical Specifications Parameter Value Main Piston Force 25.07 MN Total Press Force with Coupling 31.23 MN Max Stroke 3,070 mm Working Stroke 2,825 mm Ram Speed at 28 MN 0–64 mm/sec Ram Speed at 31.5 MN 0–57 mm/sec Billet Diameter Range Ø 230–355 mm Billet Length (cold) 320–1,320 mm Receiver Heating System Resistance; max 63 kW / 375 °C Shear Force 0.64 MN Profile Ejector Force 0.31 MN Actuation Differential Cylinders Ø 280/200 3. Included Components • B ...
1.875 litre, Stock number: T3909, Litre: 1.875, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Dished, Tank cover: In the side, Ø 360 mm, CIP: In top center, Working temperature: -10/150° C, Working pressure: 7,2 bar, Inner diameter: Ø 1200 mm, Total height: H 2150 mm, Other: The tank is polished on the in side and previously used for pressure.
4.600 litre, Stock number: T3907, Litre: 4.600, Material: Stainless acid proof steel SS 2377, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs , Top: Dished, Bottom: Dished, Tank cover: In the side, Ø 500 mm, Working temperature: 5-40° C, Working pressure tank: 3 bar, Inner diameter: Ø 1750 mm, Total height: H 2700 mm, Other: The tank is polished on the inside - Previously used for pressure
2.230 litre, Stock number: T3899, Litre: 2.230, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. of legs , Top: Dished, Bottom: Dished, Tank cover: On the side, boltet Ø 360 mm, Inner diameter: Ø 1200 mm, Total height: H 2500 mm, Other: Polished on the inside - Previously used for pressure
145 litre, Stock number: T3886, Litre: 145, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs with wheels, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Working temperature: Max 100° C, Working pressure: Max 4 Bar, Inner diameter: Ø 500 mm, Outer diameter: D 620 mm, Total height: H 1480 mm, Other: 2 pcs. inspection glasses at the side
Bending Machine FEMAS PI 30.45 - 3000 x 45 t. - NC ESA 400, Information about technical data are not binding., Machine available subject to prior sale., Capacity: 450 Kn, Bending lenght: 3050 mm, Distance between shoulders: 2550 mm, Throath depth: 350 mm, Approach speed: 50 mm/s, Bending speed %smm/s: 10 mm/s, Return speed: 68 mm/s, Backgauge type: Motorized, Backgauge travel: 500 mm + R, Cn: ESA TRIA KLT 400 (3 axes), Main motor power: Kw 5,5, Weight: 5.500 Kg, Accessories: Tool set
pressure capacity max.: 80 t Stroke: 500 mm table surface area: 960 x 810 mm spindle pitch: 72 daylight between the columns: 950 / 540 mm passage: 640 mm machine weight ab.: 4500 kg dimensions of the machine ca.: 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used baler Herateller: PAAL Type: PACOMAT II Year of Make: 1995 Specifications: Pressing force: 27 t Drive power: 18.5 kW Total connected load: 25 kW Throughput: 115 m³/h Filling opening: 1,000 x 650 mm Channel format: 1,000 x 700 mm (H x W)
automatic baler Manufacturer: PAAL Type: Pacomat IS Year of Make: 1990 specifications: Pressing force: 27 t Specific pressing force: 5.51 kg/cm² Total connected load: 23 kW Rated current: 46 A Main drive power: 18.5 kW Capacity: 80 m³/h Control: Siemens S5 100 U Bale size: 700 x 700 Filling opening: 800 x 600 mm
automatic baler Manufacturer: PAAL Type: KONTI 125 SO Year of Make: 1990 specifications: Press force: 40 t Specific pressing force: 5.7 kg/cm² Channel format: 700 x 1,000 mm Bale weight: 375 - 450 kg, depending on material and bale length Filling opening: 1,400 x 920 mm Machine weight: approx. 10 t Drive power: 22 kW Throughput: 115 m³/h Pressing capacity: approx. 4.00 t/h at department store (35 kg/m³ bulk weight) approx. 6.75 t/h for mixed paper (60 kg/m³ bulk weight) approx. 10.0 t/h for collected goods (100 kg/m³ bulk weight)
1x SK labeller GAI 6023-x01, built in 2021, for self-adhesive labels / adhesive labels with capsule roller & 2 label As good as new GAI 6023-x01 Year of construction 2021 2 label stations 1 station with 2 roll-on heads for roll-on capsules Attachment for capsules Molded parts for common bottle sizes Accumulation sensor in the outlet, collection table with belt drive Achievement: Labelling only 2800b/h with roll-on capsule: 2000b/h Price: €38,500 plus VAT ex Rheinhessen location
hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Antike Spindelpresse - Antique Spindel Press Krause 35286 Baujahr / Year ca. 1934 - Serial-No. 35286 Pressfläche / Press Size max. 400 x 500mm Wunderschön verarbeitete antike Spindelpresse Beautifully crafted antique Spindel Press
Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 66-2 MESerial-No. 06060608Year 2006
Schuppenauslage mit Presswalzen / Stream Delivery with integrated Pressing Horizon PST-40 Baujahr / Year 2006 - Serial-No. 028008 Format / Size min. 60 x 64mm - max. 440 x 310mm Höhe / High 280 - 1000mm mit Markiereinrichtung / with marking device Leistung / Geschwindigkeit 50-230m/min
Schuppenauslage mit Presswalzen / Stream Delivery integrated Pressing Heidelberg SKP.D ME Baujahr / Year 1996 - Serial-No. 79018/96-242508 Arbeitsbreite / Working width max. 660mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Stream delivery with integrated pressing rollers Fahrbar / Mobile Built-in controller Spreizen von Mehrfachnutzenströmen / Spreading Marking by 2 cm shifting Light barrier and counter Equipment for two-up production Integrierte Presse / Integrated pressing station Kontinuierlicher Schuppenstrom / Continuous stream delivery Auf Anfrage / On request: Netzadapter für den Eigenbetrieb / Power Adapter for SelfControl Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Visit our online Spare Parts Shop: www.shop.f1-trade.com
Bündelpresse / Bundle Press SPLEK SL 82B-300 Baujahr / Year 1996 - Serial-No. 1589 Pressplattengrösse / Press Plate Size max. 220mm (high) x 330mm (width) Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards.
Birth Smoking Machine Specifications: Table size600 x 320 mm Borehole depth205 mm Drill hole length250 mm Height adjustment165 mm Engine speed 2840 rpm Weight180 kg
used
Two Linde high-pressure tanks are available for the storage of hydrogen (GH2/GHe). Diameter: 2000mm, height: approx. 10600mm, wall thickness: 100mm, usable volume: 21.9m³/3600Nm³, max. operating pressure: 200bar, medium weight hydrogen/helium: 305kg/465kg, empty weight: 45000kg. Documentation available. On-site inspection is possible.
1000 me, used, Operating pressure: 1000 bar, Flow rate: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Operating hours: approx.: 181 h, Trolly, incl. gun, 10 m HD hose,
used 2-way baler Manufacturer: MBH BRONNEBERG Type: SUPER II Operating hours: 1,575 h specifications: Press forces: Lid: 900 kN Intermediate compressor: 900 kN End compressor: 120 kN Package dimensions (h x w): 305 x 305 mm Filling opening (l x w): 1,600 x 1,000 mm Drive power of the main pump: (37 kW ? to be tested) Performance data: Sheet metal waste: up to 3 – 5 mm. Cycle time: approx. 45 - 60 sec. Number of parcels: up to 40 - 50 / hour Dimensions: Length: 4,200 mm Width: 1,900 mm / 3600 mm Height: 2,400 mm Weight approx. : 10 tons Subject to errors in the technical data
VECCHIATO bending press mm. 2600X1300 mod. DE 120/70_800 – CE compliant - Opening mm. 1500 - 4 cylinders - Top-down movement - Protective nets - Year 2005 - Complete with manual and CE declaration
used tested briquetting press New components in the electrical box V400/50 Diameter briquette 50 mm Capacity approx. 50 kg/h
VECCHIATO pre-bending press mod. SN 2000/120 - Mould table length 2000 mm - Thrust 57 Ton - Min/max length of elements to be bent 500/1500 mm - Maximum thickness of elements to be bent 40 mm - Lower bench made of flexible steel sheets - Power 2.2 kw -Volt. 380/50 - Matr. 05-05 - CE standards - Year 2005
Key data: 40 t, 2000 mm
Inv. Num. : 8524 Type: PPM 20040 Producer: HACO Created: 2015 Parameters: Compressive force: 40 t Maximum bending length: 2000 mm
Ham press Nieros, pneumatic, volume approx. 190 litres, completely in stainless steel, with numerous shelves and brackets, Dimensions LxWxH approx. 105x50x90cm, weight approx. 205kg, very good used condition, fully functional
Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.
pressure: 1000 t stroke: 600 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Vertical Multistage High Pressure Centrifugal Pump GRUNDFOSNome pump, but part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-Vyear approx. 2012Flow rate at 7.2 bar: max. 10 m3/hDischarge height: max. 91.8 metersGrid connection: 400 volts, 50 HzPower: 3 kW- pump structure in 9 stages- made of stainless steel 1.4401- The pump in mint condition was used as a spare parts dispenser, but there are several new pump chambers- part of the magnetic coupling is missingsuitable for drinking water supply, irrigation
maximum number of results exceeded
please refine your search
