press eccentric used for sale

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder, pneumo-hydraulic cylinder, hydro-pneumatic press cylinder -Manufacturer: TOX PRESSOTECHNIK, pneumohydraulic cylinder type S 04.113.040.120 -Lifting distance: 300 mm -Piston: Ø mm -Piston rod: Ø 30 mm -Quantity: 2x cylinders available -Price per piece -Dimensions: 645/85/H130 mm -Weight: 16 kg/pc.

Crosscut and miter saw, pull saw, chop saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double miter -Manufacturer: Pressta Eisele, underfloor circular saw with double miter -Motor power: approx. 1.5 kW -Speed: approx. 2820 rpm -Saw blade: Ø 350 mm, swivels left 45° / right 90° -Cutting area: 90° flat 270 x120 mm -Cutting area: 45° flat 210 x 120 mm -Workpiece clamping: pneumatic horizontal clamping devices left and right -Cross stop: movable -Transport dimensions: 860/730/H1250 mm -Weight: 175 kg with pallet

Printing machine, embossing machine, stamping machine -without function, control: defective -pneumatic-hydraulic press - Stroke: 50mm - clearance between columns: 850 mm -Table surface: 400 x 370 mm -Dimensions: 1285/590/H1820 mm -Weight: 416 kg

Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys, -Number: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Support bottom: 720 mm -Support height: 1400 mm -Weight: 62 kg

1000 l oil cabinet dispensing quantity selectable. Delivery possible Please inquire with place and postcode and whether there is unloading possibility. VAT not identifiable .

Max. Sheet format: 680 x 780 mm Min sheet format: 240 x 240 mm No chemistry Improves pressroom productivity, reduces makeready time. Open interface supports most rips and prepress workflows Cip3 compatible Protek aww 650 processor Very good condition Available immediately

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

Year: 2010 - technically efficient, ready to work - after full service - cooling installation - copy template - pneumatic clamping set

Machine for cutting, cutting, folding and extrusion of sheet metal Projection: 1250 mm Number of beats/min: 560/1120/2240 beats per minute Stroke height: 2 – 10 mm Cutting speed: 0.5 – 8 m/min Max. sheet thickness: 9 mm Power supply: 380/50 V/Hz Power: 3.9KW Weight: 1.72 t Dimensions: 2.3 x 0.9 x 1.6 m

Underfloor aluminium circular sawing machine Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - Parallel stop

General SKU004Y057 LocationBarneveld MakePressindustria S.p.A. TypeTE.3/SV/R/5 No.4302 Year of construction1983 Pressure Working pressure0.067 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume7 Ltr. Motor0.55 KW Specified Features - Processing vessel MaterialStainless steel 1.4401 (316) Closed stirring vesselVacuum processing vessel (1x) Capacitymin. 3/max. 7 Ltr Vessel sizesdia. 250x250mm, Vessel can be lifted hydr. Dished bottomcheck Flat top sidecheck With covercheck With jacketcheck Max. temperature160 Degr. C. With anchor stirrerscraper stirrer Counter rotating stirrercheck Motor0,07/0,22 KW, 220 Volt (3 Ph) Speed mixing shaft3-60 Rpm With homogeniser(400-2000 Rpm) Motor0,2/0,55 KW Information With switchgearcheck Floorspace1,2x0,9 M Total height2,3 M Technical specs Extra informationVessel can be  ...

Year: 2013 - technically efficient, ready to work - after full service - two engines: 3 kW - cutting disc diameter: 2x Ø400 mm - maximum profile height: 250 mm - maximum dimensions of the 90° cutout: 135mm x 135mm - vertical disc manually adjustable in the range of 70° - 90° - 30° - material stop bar manually adjusted in the range of 30° - 90° - 30° - manual adjustment of the depth and height of the cutout

saw blade diameter: 400 mm cutting length: max. 4000 mm : 140 x 190 mm turning speeds: 2890 U/min engine output: je 2,2 kW connected load: 4,5 kW weight of the machine ca.: 0,75 t Dimensions (LxWxH): 5,0 x 1,0 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Manufacturer : Fette Model: Perfecta 2000 Year : 1988 Type : Automatic tablet press Machine weight: 2200 kg   Number of pressing stations : 36 Maximum compression force : 80 kN Maximum pre-compression force: 15 kN Maximum tablet diameter : 16 mm Maximum tablet thickness: 8.5 mm Maximum hourly output: 245,100 tablets Maximum filling height: 18 mm Divided circular scale diameter: 410 mm Die plate speed: 25-95 rpm Die diameter: 30.16 mm Die height: 22.22 mm Punch body diameter: 19 mm Punch length: 133.6 mm Punch insertion depth in die: 2 - 6 mm Overall footprint: 1212 x 1126 mm

Perfecta 1000 rotary tablet press with electrical cabinet   Manufacturer: Fette Model: Perfecta 1000 / P1000 Year : 1985 Number of pressing stations: 22 Maximum compression force: 80 kN Maximum pre-compression force: 20 kN Maximum tablet diameter: 25 mm Maximum tablet thickness: 10.5 mm Maximum hourly throughput: 72,600 tablets Maximum filling height: 22 mm Pitch diameter: 315 mm Die plate speed: 15-55 rpm Punch shape: EU 1 Die diameter: 38.1 mm Die height: 23.8 mm Punch body diameter: 25.4 mm Upper punch length: 133.6 mm Length of lower punches: 133.6 mm Depth of punch insertion into die: 2 - 6 mm Machine footprint: 1030 x 1090 mm Net weight: 1800 kg Documentation available

Manufacturer: Sefitec Year : 1982 Type : Filter press Trays : 800 x 800 mm Quantity : 65 units Capacity : 446 dcm3 Surface : 30 m2 Hydraulic unit 1,1 KW Stainless steel coating Discharge: manual

Description: Inner diameter: 220 mm Inner belt width: 200 mm Load capacity per reel: 150 kg (reel must be bolted to the floor) , Incl. wiring diagram weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,240 x 1,120 x 2,200 mm

This PRESSTA EISELE Profilma 600 R was manufactured in 2013. It features a 9.2 kW drive with an 18.5 kW reinforced option and uses saw blades with a diameter of 600 mm. The cutting range allows for a maximum cutting height of up to 210 mm and a maximum cutting width of 350 mm. It includes a Siemens S7-300 control system and a chip extraction system with a 4 kW motor. Contact us for more information.

Eccentric punching machine HAULICK + ROOS type RVD 125 double column - eccentric press machine No. 212560 Year of construction 1981 Compressive force 125 ton. Table size: 880 x 800 mm, table opening: 470 x 140 mm, stand width: 900 mm, lateral column width: 415 mm, ram stroke: 45 mm, ram adjustment range: 0-80 mm, installation height in the picture: 340 mm , stroke rate: 50 to 300 strokes/min. Engine power main drive 22 kW Mains connection 380 volts, 50 Hz - Double connecting rod engine with 4-bearing eccentric shaft for off-center ram pressure Load - adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of construction 2003 - adjacent control panel for the roller feeder - strip running direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press about 11 ton.; used

Servo controlled eccentric press line 40 Ton Press capacity 860 mm max material width

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, double column eccentric press -Manufacturer: WMW, double column eccentric press type PED 100/2 -Pressure capacity: 100 to -Clutch: pneumatic -Stroke: adjustable 20 - 140 mm -Stroke rate: 45 strokes/min, see photo type plate -Table size: 900 x 670 mm -Table recess: Ø 157 mm -Projection: 360 mm -Punch holder: Ø 60 mm -Insertion height: 470 mm -Dimensions: 2200/1600/H3300mm -Weight: approx. 8500 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Smeral Trnava, single-column eccentric press type LEN 25 C -Pressure capacity: 25 tons -Clutch: pneumatic -Stroke: adjustable 8 - 85 mm -Stroke rate: 80-160 strokes/min, see photo of type plate -Table size: 435 x 560 mm -Table recess: Ø 90/180 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 230 mm -Dimensions: press 1220/1160/H2100 mm / control cabinet 680/355/H970 mm -Total weight: 2569 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Punching machine manufacturer: Müller, single-column eccentric press type PDE30SLFHK -Pressure capacity: 30 tons -Stroke: adjustable 80mm -Stroke rate: 80-380 strokes/min -Table size: 800 x 420 mm -Table recess: 340 x 205 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 395 mm -Roller feed manufacturer: ALBA type EVS200/0.1 -Feed/stroke: from 0.1 - 6500 mm -Material width: from 10 - 200 mm -Material thickness: from 0.5 - 2.0 mm -Punching device: incl. 4 column punching tool Matocapco MOR, see photos -Dimensions: 1650/1920/H2300mm, 420/1000/H980mm, 700/600/H1050mm -Total weight: approx. 3200 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Punching machine manufacturer: Müller, single-column eccentric press type PDE30SLFHK -Pressure capacity: 30 tons -Stroke: adjustable 80mm -Stroke rate: 80-380 strokes/min -Table size: 800 x 415 mm -Table recess: 195 x 340 mm - Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 400 mm -Roller feed manufacturer: ALBA type EVS200/0.1 -Feed/stroke: from 0.1 - 6500 mm -Material width: from 10 - 200 mm -Material thickness: from 0.5 - 2.0 mm -Dimensions: 1620/1715/H2250mm, 420/1000/H1110mm, 700/630/H1050mm -Weight: 2860kg, 143kg, 104kg

Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Kaiser, punching machine with gripper feed type PO 40 F -Pressure capacity: 55 tons -Stroke: adjustable from 9 to 60 mm -Stroke rate: 70-350 strokes/min -Table size: 590 x 410 mm -Table recess: 290 x 150 mm -Projection: 220 mm -Punching fixture: Ø 38 mm -Insertion height 335 mm -Dimensions: 1905/1540/H2940 mm -Weight: 3720 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press, -Safety cage fully closed -pneumatic viewing window with finger protection -Pressure force: 35 tons -Projection: 190 mm -Strokes: 105 strokes/min -Plunger adjustable: 50 mm -Plunger area 250 x 200 mm -Adjustable stroke: 15-70 mm -Table size: 540 x 310 mm -Projection: 180 mm

Description: AMBROGIO GALLI 40 GAMMA Eccentric Press Line Includes : - n.1 AMBROGIO GALLI 40 GAMMA Eccentric Press Pressure 40 TON Min/max stroke 9/100 mm No. of strokes 80/210 Motor power 2/6 HP Table size 750x450 mm Press size 1500x1500x2900 mm - ISOTEC soundproof cabin Dimensions 1900x1800x3100 mm - n.1 ELMEA decoiler Model SC18A71 production year 1972 Maximum coil size 300 mm Reel holder size 1600x1000x1600 - ELMEA decoiler Model MS10A production year 1997 maximum coil size 300 mm Reel holder size 1500x1300x1600 - Exit conveyor - Electrical panels for press - Protective grills NOT INCLUDED IN THE ITEM NOT INCLUDED : - N.2 feeders for eccentric press - N.1 control/vision for feeders , - No. 1 BRANKAMP process control system - N. 1 packaging exit conveyor weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 4,500 x 3,500 mm

SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...

Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. El schematics included. Packing and loading included. Feeding device not included, if needed contact for more information.

Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016

SINO NCP 160 eccentric press built in China in 2018 by Sino Machinery & Tools (Dongguan) Co., LTD. performs machining of metal workpieces with a press force of 160 tonnes. The machine is equipped with high-quality components, including e.g. a 100 mm adjustable slider making up to 25 to 55 strokes per minute, and a YU JAIV PDH-120 indicator displaying the distance of the die between the table and the slider. The large working area, ease of operation and outstanding precision, guarantee excellent machining results. The press offers the possibility of combining it with an automatic feeding system in order to increase the number of parts produced and significantly reduce costs. The total weight of the machine is 13 tonnes. Technical data of the SINO NCP 160 press - maximum press force: 160 t - work area dimensions (L x W x H): 910 x 600 x 410 mm - bolster dimensions (L x W x H): 125 ...

RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...

ZTS KOSICE LEK 160 eccentric press was built in 1985 in Czechoslovakia. The press, operating with a force of 160 tonnes and a slider making up to 50 strokes per minute, is designed for, e.g. punching, cutting and pressing of workpieces. Machining is performed on a large work table with a length of 1000 mm and a width of 740 mm, with full illumination in the form of a lamp mounted on the body of the KOSICE LEK 160 machine. The total weight of the machine is 12180 kg. Technical data of the ZTS KOSICE LEK 160 press - maximum press force: 160 t (1600 kN) - work space dimensions (L x W): 1000 x 740 mm - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 32/min - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider adjustment range: 100 mm - reach: 355 mm - workspace illumination - weight of the KOSICE LEK-160 machine: 12180 kg

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adjustment: ...

Fast press /Eccentric press #5282 Force 60 t Stroke : 38mm Strokes/min: 0-450 Overall size: 2650x1500x3200 mm Weight: 8 t

Small eccentric press make BMW type TP 3Machine -No: 60301724 Year of construction 1964Max. Press force: 3.0 tTable size: 200 x 160 mmBear size: 80 x 60 mmDiarrhea hole in the table: 80 mmDrive power: 0.37 kWWeight approx: 134 kgOutside dimensions approx: 700 x 350 x 750 mmWith- 2-hand release- Footswitch- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make EDELHOFF type AZR / H638997 built in 1988Max. Press force: 63 tStroke adjustment: 10 - 90 mmRam adjustment: 55 mmRam strokes: 70 hpM.Table size: 800 x 800 mmDrive power: 4.0 kWWith- large table- 2 damping cylinders- Two-hand release- hydraulic clutch- Additional brakeused, in first-class conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine Type: Eccentric Press Manufacturer: BERNINGHAUS Model No.: UPS V25/250 Condition: ready for use Offer Type: Used Machine Specifications: Compressive force: 25 t Projection: 250 mm Table: 550 x 425 mm Installation height: 330 mm Propulsion: 1.25 kW Remark: with Leinhaas press guard (protective screen), height-adjustable table, Foot release Weight: 1500 kg The machine is in a ready-to-use condition and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make WEINGARTEN type ARV 63Order number. 121101, built in 1971Technical specifications:Pressing force: 63 tgr. sheet thickness: 10 mmDischarge: 270 mmTable: 760 x 480 mmDiarrhea hole in the table: 250 x 150 mmNumber of strokes: 56 and 84 / mingr. distance table - ram: 500 mmkl. Distance table - ram: 200 mmRam stroke: 8 - 100 mmRam adjustment: 63 mmExternal dimensions L x W x H: 900 x 2000 x 2600 mmWeight approx: 4 tonsWith- UVV for inlays- EMERGENCY STOP SWITCHused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press MABU type 12 TFprobably built in 1984Technical specifications:Pressing force: 12 tStroke adjustment: 6 - 60 mmTable size: 380 x 270 mmDiarrhea: 100 mmBear size: 120 x 100 mmInstallation height: 210 mmThroat: 145 mmDrive power: 1.1 kWExternal dimensions approx: 800 x 900 x 1750 mmWith- pneum. Friction clutch Control BA 1.1 for with / without movable protection Movable security not available!- height adjustable table- foot switch- stroke counterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HELMERDING type EL 35 BCom.-No: 77218 Masch.-No: 5182 year of construction 1977Technical specifications:Pressure capacity: 35 tStroke adjustment: 12 - 80 mmRam adjustment: 70 mmRam area: 340 x 180 mmgreatest distance table - ram: 360 mmStrokes per minute: 110Table adjustment: 150 mmProjection: 230 mmTable surface: 600 x 460 mmDrop-through hole in the table: 220 x 130 mmWeight approx.: 2050 kgwith- Additional brake Ortlinghausen and UVV- Height-adjustable tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools